- 25 7月, 2009 14 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Since frames per second is a function of cristal frequency, and this is device-specific, add a function that allows adjusting it, via subdev->core->s_config callback. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
vstart calculus were wrong. Fix it. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
It is possible to adjust the fps rate by changing some register values. This is function of the connected Xtal at the camera sensor, being a 27 MHz cristal needed, in order to support 640x480 at 30 fps. For now, it will only calculate the values for fps. Later patches may introduce V4L2 ioctls, to allow frequency rate adjustments. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
While trying to fix an mt9v001 webcam, I noticed that HSCALE/VSCALE do work with em28xx + webcam. The issue is that the scaling setup depends on the number of visible rows/cols of the input image. With mt9v011 (Silvercrest), the resolution is 640x480. So, the scaling is different from a normal TV image (720x480 on NTSC). This were causing a wrong scaling and a previous patch disabled scaling. As each sensor have their different resolution setting, the xres/yres should be adjusted accordingly with the input sensor. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
With the previous approach, autodetection were working only for the two generic entries (em275x and em2820 unknown ones). So, if someone would try to force probing an specific device, the code would not properly run the autodetection code. With the new approach, the sensor autodetection will be run not only for the two generic entries, but also do webcam specific ones. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of using em28xx board decoder field for storing sensor information, let's use instead a separate field for it. Also, as sensors are currently autodetected, there's no need of having it at the boards description. So, move it to the main em28xx struct. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Webcams in general don't have eeprom. So, the sensor hint code should be called to properly detect what sensor is inside. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
By having the webcam devices marked as such, it will help the em28xx driver to do the right thing on those devices. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Just renames the flag, to use a clearer name. Later patches will use this flag to properly set some drivers behaviors for webcams. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Erik Andrén 提交于
A couple of erroneous register writes snuck in that made the image go haywire. Remove these. Many thanks to Grégory Lardière for finding this out Signed-off-by: NErik Andrén <erik.andren@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Erik Andrén 提交于
Signed-off-by: NErik Andrén <erik.andren@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Erik Andrén 提交于
All hdcs registers use bit 0 as a read/write flag and needs to be shifted one bit to the left. This wasn't accounted for when doing a sequence of writes. Signed-off-by: NErik Andrén <erik.andren@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Erik Andrén 提交于
Signed-off-by: NErik Andrén <erik.andren@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 23 7月, 2009 26 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix UP compile failure caused by irq_thread_check_affinity
-
由 Linus Torvalds 提交于
Merge branch 'lockdep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep * 'lockdep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep: lockdep: Fix lockdep annotation for pipe_double_lock()
-
由 Bruno Premont 提交于
Since genirq: Delegate irq affinity setting to the irq thread (591d2fb0) compilation with CONFIG_SMP=n fails with following error: /usr/src/linux-2.6/kernel/irq/manage.c: In function 'irq_thread_check_affinity': /usr/src/linux-2.6/kernel/irq/manage.c:475: error: 'struct irq_desc' has no member named 'affinity' make[4]: *** [kernel/irq/manage.o] Error 1 That commit adds a new function irq_thread_check_affinity() which uses struct irq_desc.affinity which is only available for CONFIG_SMP=y. Move that function under #ifdef CONFIG_SMP. [ tglx@brownpaperbag: compile and boot tested on UP and SMP ] Signed-off-by: NBruno Premont <bonbons@linux-vserver.org> LKML-Reference: <20090722222232.2eb3e1c4@neptune.home> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Peter Zijlstra 提交于
The presumed use of the pipe_double_lock() routine is to lock 2 locks in a deadlock free way by ordering the locks by their address. However it fails to keep the specified lock classes in order and explicitly annotates a deadlock. Rectify this. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NMiklos Szeredi <mszeredi@suse.cz> LKML-Reference: <1248163763.15751.11098.camel@twins>
-
由 Linus Torvalds 提交于
Merge branch 'perf-counters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-perf * 'perf-counters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-perf: (31 commits) perf_counter tools: Give perf top inherit option perf_counter tools: Fix vmlinux symbol generation breakage perf_counter: Detect debugfs location perf_counter: Add tracepoint support to perf list, perf stat perf symbol: C++ demangling perf: avoid structure size confusion by using a fixed size perf_counter: Fix throttle/unthrottle event logging perf_counter: Improve perf stat and perf record option parsing perf_counter: PERF_SAMPLE_ID and inherited counters perf_counter: Plug more stack leaks perf: Fix stack data leak perf_counter: Remove unused variables perf_counter: Make call graph option consistent perf_counter: Add perf record option to log addresses perf_counter: Log vfork as a fork event perf_counter: Synthesize VDSO mmap event perf_counter: Make sure we dont leak kernel memory to userspace perf_counter tools: Fix index boundary check perf_counter: Fix the tracepoint channel to perfcounters perf_counter, x86: Extend perf_counter Pentium M support ...
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: softirq: introduce tasklet_hrtimer infrastructure
-
由 Linus Torvalds 提交于
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource: Prevent NULL pointer dereference timer: Avoid reading uninitialized data
-
由 Linus Torvalds 提交于
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Delegate irq affinity setting to the irq thread
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: fix nr_uninterruptible accounting of frozen tasks really sched: fix load average accounting vs. cpu hotplug sched: Account for vruntime wrapping
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc由 Linus Torvalds 提交于
* 'tj-block-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: virtio_blk: mark virtio_blk with __refdata to kill spurious section mismatch block: sysfs fix mismatched queue_var_{store,show} in 64bit kernel ataflop: adjust NULL test block: fix failfast merge testing in elv_rq_merge_ok() z2ram: Small cleanup for z2ram.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: fs/Kconfig: move nilfs2 out
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide-tape: Don't leak kernel stack information ide: fix memory leak when flush command is issued
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) sky2: Avoid races in sky2_down drivers/net/mlx4: Adjust constant drivers/net: Move a dereference below a NULL test drivers/net: Move a dereference below a NULL test connector: maintainer/mail update. USB host CDC Phonet network interface driver macsonic, jazzsonic: fix oops on module unload macsonic: move probe function to .devinit.text can: switch carrier on if device was stopped while in bus-off state can: restart device even if dev_alloc_skb() fails can: sja1000: remove duplicated includes New device ID for sc92031 [1088:2031] 3c589_cs: re-initialize the multicast in the tc589_reset Fix error return for setsockopt(SO_TIMESTAMPING) netxen: fix thermal check and shutdown netxen: fix deadlock on dev close netxen: fix context deletion sequence net: Micrel KS8851 SPI network driver tcp: Use correct peer adr when copying MD5 keys tcp: Fix MD5 signature checking on IPv4 mapped sockets ...
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFSv4: Fix a problem whereby a buggy server can oops the kernel NFSv4: Fix an NFSv4 mount regression NFSv4: Fix an Oops in nfs4_free_lock_state
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: ctxfi: Swapped SURROUND-SIDE channels on emu20k2 ALSA: ca0106 - Fix the max capture buffer size ALSA: hda - Fix pin-setup for Sony VAIO with STAC9872 codecs ALSA: hda - Add quirk for Gateway T6834c laptop ALSA: OSS sequencer should be initialized after snd_seq_system_client_init ALSA: sound/isa: convert nested spin_lock_irqsave to spin_lock ALSA: hda_codec: Check for invalid zero connections
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Move dereferences below a NULL test HID: hiddev, fix lock imbalance
-
由 Arjan van de Ven 提交于
the "reserved" field was not initialized to zero, resulting in 4 bytes of stack data leaking to userspace.... Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/ubi-2.6由 Linus Torvalds 提交于
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: fix bug in image sequence number handling UBI: gluebi: initialize ubi_num field
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atkbd - add force relese key quirk for Soltech TA12 Input: fix EVIOCGNAME/JSIOCGNAME regression Input: atkbd - add forced release keys quirk for FSC Amilo Pi 3525 Input: pcspkr - switch driver to dev_pm_ops Input: xpad - don't resend successfully sent outgoing requests Input: wistron_btns - recognize Maxdata Pro 7000 notebooks
-
由 Mike Galbraith 提交于
Currently, perf top -p only tracks the pid provided, which isn't very useful for watching forky loads, so give it an inherit option. Signed-off-by: NMike Galbraith <efault@gmx.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1248165036.9795.10.camel@marge.simson.net>
-
由 Mike Galbraith 提交于
vmlinux meets the criteria for symbol adjustment, which breaks vmlinux generated symbols. Fix this by exempting vmlinux. This is a bit fragile in that someone could change the kernel dso's name, but currently that name is also hardwired. Signed-off-by: NMike Galbraith <efault@gmx.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1248091298.18702.18.camel@marge.simson.net>
-
由 Jason Baron 提交于
If "/sys/kernel/debug" is not a debugfs mount point, search for the debugfs filesystem in /proc/mounts, but also allows the user to specify '--debugfs-dir=blah' or set the environment variable: 'PERF_DEBUGFS_DIR' Signed-off-by: NJason Baron <jbaron@redhat.com> [ also made it probe "/debug" by default ] Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090721181629.GA3094@redhat.com>
-
由 Jason Baron 提交于
Add support to 'perf list' and 'perf stat' for kernel tracepoints. The implementation creates a 'for_each_subsystem' and 'for_each_event' for easy iteration over the tracepoints. Signed-off-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <426129bf9fcc8ee63bb094cf736e7316a7dcd77a.1248190728.git.jbaron@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
[acme@doppio ~]$ perf report -s comm,dso,symbol -C firefox -d /usr/lib64/xulrunner-1.9.1/libxul.so | grep :: | head 2.21% [.] nsDeque::Push(void*) 1.78% [.] GraphWalker::DoWalk(nsDeque&) 1.30% [.] GCGraphBuilder::AddNode(void*, nsCycleCollectionParticipant*) 1.27% [.] XPCWrappedNative::CallMethod(XPCCallContext&, XPCWrappedNative::CallMode) 1.18% [.] imgContainer::DrawFrameTo(gfxIImageFrame*, gfxIImageFrame*, nsRect&) 1.13% [.] nsDeque::PopFront() 1.11% [.] nsGlobalWindow::RunTimeout(nsTimeout*) 0.97% [.] nsXPConnect::Traverse(void*, nsCycleCollectionTraversalCallback&) 0.95% [.] nsJSEventListener::cycleCollection::Traverse(void*, nsCycleCollectionTraversalCallback&) 0.95% [.] nsCOMPtr_base::~nsCOMPtr_base() [acme@doppio ~]$ Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Suggested-by: NClark Williams <williams@redhat.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090720171412.GB10410@ghostprotocols.net>
-
由 Arjan van de Ven 提交于
for some reason, this structure gets compiled as 36 bytes in some files (the ones that alloacte it) but 40 bytes in others (the ones that use it). The cause is an off_t type that gets a different size in different compilation units for some yet-to-be-explained reason. But the effect is disasterous; the size/offset members of the struct are at different offsets, and result in mostly complete garbage. The parser in perf is so robust that this all gets hidden, and after skipping an certain amount of samples, it recovers.... so this bug is not normally noticed. .... except when you want every sample to be exact. Fix this by just using an explicitly sized type. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4A655917.9080504@linux.intel.com>
-