- 14 6月, 2016 1 次提交
-
-
由 Arnd Bergmann 提交于
gcc-6 warns about code in il3945_hw_txq_ctx_free() being somewhat ambiguous: drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] This adds a set of curly braces to avoid the warning. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 12 4月, 2016 1 次提交
-
-
由 Johannes Berg 提交于
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 18 11月, 2015 1 次提交
-
-
由 Kalle Valo 提交于
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 13 8月, 2014 1 次提交
-
-
由 Benoit Taine 提交于
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 01 5月, 2014 1 次提交
-
-
由 Joe Perches 提交于
Use a newline character appropriately. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 04 1月, 2014 2 次提交
-
-
由 Paul Gortmaker 提交于
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Acked-by: NChristian Lamparter <chunkeey@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h, il_priv defined in drivers/net/wireless/iwlegacy/common.h and il_rxon_cmd defined in drivers/net/wireless/iwlegacy/commands.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 7月, 2013 1 次提交
-
-
由 Eric Dumazet 提交于
Steinar reported reallocations of skb->head with IPv6, leading to a warning in skb_try_coalesce() It turns out iwl3945 has several problems : 1) skb->truesize is underestimated. We really consume PAGE_SIZE bytes for a fragment, not the frame length. 2) 128 bytes of initial headroom is a bit low and forces reallocations. 3) We can avoid consuming a full page for small enough frames. Reported-by: NSteinar H. Gunderson <sesse@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Paul Stewart <pstew@google.com> Acked-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 6月, 2013 1 次提交
-
-
由 Stanislaw Gruszka 提交于
Firmware can reject to transmit frame on passive channel, when it did not yet received any frame with valid CRC on that channel. Workaround this problem in the driver. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 15 3月, 2013 1 次提交
-
-
由 Joe Perches 提交于
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 11月, 2012 1 次提交
-
-
由 Johannes Berg 提交于
The vendor radiotap patch added a few fields to struct ieee80211_rx_status that need to be zero, initialize the struct instead of using whatever was left on the stack. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 5月, 2012 1 次提交
-
-
由 Joe Perches 提交于
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
skb_add_rx_frag() API is misleading. Network skbs built with this helper can use uncharged kernel memory and eventually stress/crash machine in OOM. Add a 'truesize' parameter and then fix drivers in followup patches. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2012 1 次提交
-
-
由 Stanislaw Gruszka 提交于
On il3945_down procedure we free tx queue data and nullify il->txq pointer. After that we drop mutex and then cancel delayed works. There is possibility, that after drooping mutex and before the cancel, some delayed work will start and crash while trying to send commands to the device. For example, here is reported crash in il3945_bg_reg_txpower_periodic(): https://bugzilla.kernel.org/show_bug.cgi?id=42766#c10 Patch fix problem by adding il->txq check on works that send commands, hence utilize tx queue. Reported-by: NClemens Eisserer <linuxhippy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 2月, 2012 10 次提交
-
-
由 Stanislaw Gruszka 提交于
Previous name was confusing. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
If rfkill is on il_grab_nic_access() fail and we can not write to the various registers during stop procedure. Write to those registers unconditionally instead. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
The same data can be gathered using monitor mode. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 2月, 2012 6 次提交
-
-
由 Stanislaw Gruszka 提交于
It's just wrapper to sk_buff pointers ... Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 1月, 2012 3 次提交
-
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Remove these helpers, some are not unused at all, one can be unrolled in place of use. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Carpenter 提交于
We use "rate_index" like this: rate = iwl3945_rates[rate_index].plcp; The iwl3945_rates[] array has IWL_RATE_COUNT_3945 elements so the limit here is off by one. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 16 11月, 2011 1 次提交
-
-
由 Greg Dietsche 提交于
Only setup structs related to debugfs_ops when CONFIG_IWLEGACY_DEBUGFS is set. Signed-off-by: NGreg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
-
- 15 11月, 2011 6 次提交
-
-
由 Stanislaw Gruszka 提交于
Fix most checkpatch.pl ERRORs and some WARNINGs. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
-
由 Stanislaw Gruszka 提交于
Process iwlegacy source files using: indent -npro -l500 -nhnl indent -npro -kr -i8 -ts8 -sob -l80 -nbbo -ss -ncs -cp1 -il0 -psl Plus manual compilation fixes. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
-
由 Stanislaw Gruszka 提交于
On the way remove also not needed iwl-fh.h include. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
-