提交 89ef1ed2 编写于 作者: S Stanislaw Gruszka 提交者: John W. Linville

iwlegacy: merge il_base_params into il_cfg

Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 c39ae9fd
......@@ -2398,7 +2398,7 @@ il3945_hw_set_hw_params(struct il_priv *il)
il->hw_params.bcast_id = IL3945_BROADCAST_ID;
/* Assign number of Usable TX queues */
il->hw_params.max_txq_num = il->cfg->base_params->num_of_queues;
il->hw_params.max_txq_num = il->cfg->num_of_queues;
il->hw_params.tfd_size = sizeof(struct il3945_tfd);
il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_3K);
......@@ -2693,16 +2693,6 @@ const struct il_ops il3945_ops = {
.legacy = &il3945_legacy_ops,
};
static struct il_base_params il3945_base_params = {
.eeprom_size = IL3945_EEPROM_IMG_SIZE,
.num_of_queues = IL39_NUM_QUEUES,
.pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
.set_l0s = false,
.use_bsm = true,
.led_compensation = 64,
.wd_timeout = IL_DEF_WD_TIMEOUT,
};
static struct il_cfg il3945_bg_cfg = {
.name = "3945BG",
.fw_name_pre = IL3945_FW_PRE,
......@@ -2711,8 +2701,15 @@ static struct il_cfg il3945_bg_cfg = {
.sku = IL_SKU_G,
.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
.mod_params = &il3945_mod_params,
.base_params = &il3945_base_params,
.led_mode = IL_LED_BLINK,
.eeprom_size = IL3945_EEPROM_IMG_SIZE,
.num_of_queues = IL39_NUM_QUEUES,
.pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
.set_l0s = false,
.use_bsm = true,
.led_compensation = 64,
.wd_timeout = IL_DEF_WD_TIMEOUT
};
static struct il_cfg il3945_abg_cfg = {
......@@ -2723,8 +2720,15 @@ static struct il_cfg il3945_abg_cfg = {
.sku = IL_SKU_A | IL_SKU_G,
.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
.mod_params = &il3945_mod_params,
.base_params = &il3945_base_params,
.led_mode = IL_LED_BLINK,
.eeprom_size = IL3945_EEPROM_IMG_SIZE,
.num_of_queues = IL39_NUM_QUEUES,
.pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
.set_l0s = false,
.use_bsm = true,
.led_compensation = 64,
.wd_timeout = IL_DEF_WD_TIMEOUT
};
DEFINE_PCI_DEVICE_TABLE(il3945_hw_card_ids) = {
......
......@@ -627,13 +627,13 @@ il4965_find_disconn_antenna(struct il_priv *il, u32 * average_sig,
average_sig[0] =
data->chain_signal_a /
il->cfg->base_params->chain_noise_num_beacons;
il->cfg->chain_noise_num_beacons;
average_sig[1] =
data->chain_signal_b /
il->cfg->base_params->chain_noise_num_beacons;
il->cfg->chain_noise_num_beacons;
average_sig[2] =
data->chain_signal_c /
il->cfg->base_params->chain_noise_num_beacons;
il->cfg->chain_noise_num_beacons;
if (average_sig[0] >= average_sig[1]) {
max_average_sig = average_sig[0];
......@@ -886,7 +886,7 @@ il4965_chain_noise_calibration(struct il_priv *il, void *stat_resp)
/* If this is the "chain_noise_num_beacons", determine:
* 1) Disconnected antennas (using signal strengths)
* 2) Differential gain (using silence noise) to balance receivers */
if (data->beacon_count != il->cfg->base_params->chain_noise_num_beacons)
if (data->beacon_count != il->cfg->chain_noise_num_beacons)
return;
/* Analyze signal for disconnected antenna */
......@@ -894,11 +894,11 @@ il4965_chain_noise_calibration(struct il_priv *il, void *stat_resp)
/* Analyze noise for rx balance */
average_noise[0] =
data->chain_noise_a / il->cfg->base_params->chain_noise_num_beacons;
data->chain_noise_a / il->cfg->chain_noise_num_beacons;
average_noise[1] =
data->chain_noise_b / il->cfg->base_params->chain_noise_num_beacons;
data->chain_noise_b / il->cfg->chain_noise_num_beacons;
average_noise[2] =
data->chain_noise_c / il->cfg->base_params->chain_noise_num_beacons;
data->chain_noise_c / il->cfg->chain_noise_num_beacons;
for (i = 0; i < NUM_RX_CHAINS; i++) {
if (!data->disconn_array[i] &&
......
......@@ -2150,11 +2150,11 @@ il4965_txq_agg_enable(struct il_priv *il, int txq_id, int tx_fifo, int sta_id,
if ((IL49_FIRST_AMPDU_QUEUE > txq_id) ||
(IL49_FIRST_AMPDU_QUEUE +
il->cfg->base_params->num_of_ampdu_queues <= txq_id)) {
il->cfg->num_of_ampdu_queues <= txq_id)) {
IL_WARN("queue number out of range: %d, must be %d to %d\n",
txq_id, IL49_FIRST_AMPDU_QUEUE,
IL49_FIRST_AMPDU_QUEUE +
il->cfg->base_params->num_of_ampdu_queues - 1);
il->cfg->num_of_ampdu_queues - 1);
return -EINVAL;
}
......@@ -2278,11 +2278,11 @@ il4965_txq_agg_disable(struct il_priv *il, u16 txq_id, u16 ssn_idx, u8 tx_fifo)
{
if ((IL49_FIRST_AMPDU_QUEUE > txq_id) ||
(IL49_FIRST_AMPDU_QUEUE +
il->cfg->base_params->num_of_ampdu_queues <= txq_id)) {
il->cfg->num_of_ampdu_queues <= txq_id)) {
IL_WARN("queue number out of range: %d, must be %d to %d\n",
txq_id, IL49_FIRST_AMPDU_QUEUE,
IL49_FIRST_AMPDU_QUEUE +
il->cfg->base_params->num_of_ampdu_queues - 1);
il->cfg->num_of_ampdu_queues - 1);
return -EINVAL;
}
......
......@@ -614,13 +614,13 @@ il4965_hw_set_hw_params(struct il_priv *il)
{
if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES &&
il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES)
il->cfg->base_params->num_of_queues =
il->cfg->num_of_queues =
il->cfg->mod_params->num_of_queues;
il->hw_params.max_txq_num = il->cfg->base_params->num_of_queues;
il->hw_params.max_txq_num = il->cfg->num_of_queues;
il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
il->hw_params.scd_bc_tbls_size =
il->cfg->base_params->num_of_queues *
il->cfg->num_of_queues *
sizeof(struct il4965_scd_bc_tbl);
il->hw_params.tfd_size = sizeof(struct il_tfd);
il->hw_params.max_stations = IL4965_STATION_COUNT;
......@@ -2331,22 +2331,6 @@ const struct il_ops il4965_ops = {
.legacy = &il4965_legacy_ops,
};
static struct il_base_params il4965_base_params = {
.eeprom_size = IL4965_EEPROM_IMG_SIZE,
.num_of_queues = IL49_NUM_QUEUES,
.num_of_ampdu_queues = IL49_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = true,
.led_compensation = 61,
.chain_noise_num_beacons = IL4965_CAL_NUM_BEACONS,
.wd_timeout = IL_DEF_WD_TIMEOUT,
.temperature_kelvin = true,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
};
struct il_cfg il4965_cfg = {
.name = "Intel(R) Wireless WiFi Link 4965AGN",
.fw_name_pre = IL4965_FW_PRE,
......@@ -2358,13 +2342,26 @@ struct il_cfg il4965_cfg = {
.eeprom_ver = EEPROM_4965_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
.mod_params = &il4965_mod_params,
.base_params = &il4965_base_params,
.led_mode = IL_LED_BLINK,
/*
* Force use of chains B and C for scan RX on 5 GHz band
* because the device has off-channel reception on chain A.
*/
.scan_rx_antennas[IEEE80211_BAND_5GHZ] = ANT_BC,
.eeprom_size = IL4965_EEPROM_IMG_SIZE,
.num_of_queues = IL49_NUM_QUEUES,
.num_of_ampdu_queues = IL49_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = true,
.led_compensation = 61,
.chain_noise_num_beacons = IL4965_CAL_NUM_BEACONS,
.wd_timeout = IL_DEF_WD_TIMEOUT,
.temperature_kelvin = true,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
};
/* Module firmware */
......
......@@ -512,13 +512,13 @@ il_led_cmd(struct il_priv *il, unsigned long on, unsigned long off)
}
D_LED("Led blink time compensation=%u\n",
il->cfg->base_params->led_compensation);
il->cfg->led_compensation);
led_cmd.on =
il_blink_compensation(il, on,
il->cfg->base_params->led_compensation);
il->cfg->led_compensation);
led_cmd.off =
il_blink_compensation(il, off,
il->cfg->base_params->led_compensation);
il->cfg->led_compensation);
ret = il->ops->led->cmd(il, &led_cmd);
if (!ret) {
......@@ -691,7 +691,7 @@ il_eeprom_verify_signature(struct il_priv *il)
const u8 *
il_eeprom_query_addr(const struct il_priv *il, size_t offset)
{
BUG_ON(offset >= il->cfg->base_params->eeprom_size);
BUG_ON(offset >= il->cfg->eeprom_size);
return &il->eeprom[offset];
}
EXPORT_SYMBOL(il_eeprom_query_addr);
......@@ -722,7 +722,7 @@ il_eeprom_init(struct il_priv *il)
u16 addr;
/* allocate eeprom */
sz = il->cfg->base_params->eeprom_size;
sz = il->cfg->eeprom_size;
D_EEPROM("NVM size = %d\n", sz);
il->eeprom = kzalloc(sz, GFP_KERNEL);
if (!il->eeprom) {
......@@ -4218,7 +4218,7 @@ il_apm_init(struct il_priv *il)
* If not (unlikely), enable L0S, so there is at least some
* power savings, even without L1.
*/
if (il->cfg->base_params->set_l0s) {
if (il->cfg->set_l0s) {
lctl = il_pcie_link_ctl(il);
if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
PCI_CFG_LINK_CTRL_VAL_L1_EN) {
......@@ -4235,9 +4235,9 @@ il_apm_init(struct il_priv *il)
}
/* Configure analog phase-lock-loop before activating to D0A */
if (il->cfg->base_params->pll_cfg_val)
if (il->cfg->pll_cfg_val)
il_set_bit(il, CSR_ANA_PLL_CFG,
il->cfg->base_params->pll_cfg_val);
il->cfg->pll_cfg_val);
/*
* Set "initialization complete" bit to move adapter from
......@@ -4267,7 +4267,7 @@ il_apm_init(struct il_priv *il)
* do not disable clocks. This preserves any hardware bits already
* set by default in "CLK_CTRL_REG" after reset.
*/
if (il->cfg->base_params->use_bsm)
if (il->cfg->use_bsm)
il_wr_prph(il, APMG_CLK_EN_REG,
APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
else
......@@ -4565,7 +4565,7 @@ il_alloc_txq_mem(struct il_priv *il)
if (!il->txq)
il->txq =
kzalloc(sizeof(struct il_tx_queue) *
il->cfg->base_params->num_of_queues, GFP_KERNEL);
il->cfg->num_of_queues, GFP_KERNEL);
if (!il->txq) {
IL_ERR("Not enough memory for txq\n");
return -ENOMEM;
......@@ -4942,11 +4942,11 @@ il_check_stuck_queue(struct il_priv *il, int cnt)
timeout =
txq->time_stamp +
msecs_to_jiffies(il->cfg->base_params->wd_timeout);
msecs_to_jiffies(il->cfg->wd_timeout);
if (time_after(jiffies, timeout)) {
IL_ERR("Queue %d stuck for %u ms.\n", q->id,
il->cfg->base_params->wd_timeout);
il->cfg->wd_timeout);
ret = il_force_reset(il, false);
return (ret == -EAGAIN) ? 0 : 1;
}
......@@ -4974,7 +4974,7 @@ il_bg_watchdog(unsigned long data)
if (test_bit(S_EXIT_PENDING, &il->status))
return;
timeout = il->cfg->base_params->wd_timeout;
timeout = il->cfg->wd_timeout;
if (timeout == 0)
return;
......@@ -5001,7 +5001,7 @@ EXPORT_SYMBOL(il_bg_watchdog);
void
il_setup_watchdog(struct il_priv *il)
{
unsigned int timeout = il->cfg->base_params->wd_timeout;
unsigned int timeout = il->cfg->wd_timeout;
if (timeout)
mod_timer(&il->watchdog,
......
......@@ -1695,21 +1695,6 @@ struct il_mod_params {
* chain noise calibration operation
*/
struct il_base_params {
int eeprom_size;
int num_of_queues; /* def: HW dependent */
int num_of_ampdu_queues; /* def: HW dependent */
/* for il_apm_init() */
u32 pll_cfg_val;
bool set_l0s;
bool use_bsm;
u16 led_compensation;
int chain_noise_num_beacons;
unsigned int wd_timeout;
bool temperature_kelvin;
const bool ucode_tracing;
const bool sensitivity_calib_by_driver;
const bool chain_noise_calib_by_driver;
};
#define IL_LED_SOLID 11
......@@ -1784,6 +1769,22 @@ struct il_cfg {
/* params likely to change within a device family */
u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
enum il_led_mode led_mode;
int eeprom_size;
int num_of_queues; /* def: HW dependent */
int num_of_ampdu_queues; /* def: HW dependent */
/* for il_apm_init() */
u32 pll_cfg_val;
bool set_l0s;
bool use_bsm;
u16 led_compensation;
int chain_noise_num_beacons;
unsigned int wd_timeout;
bool temperature_kelvin;
const bool ucode_tracing;
const bool sensitivity_calib_by_driver;
const bool chain_noise_calib_by_driver;
};
/***************************
......
......@@ -361,7 +361,7 @@ il_dbgfs_nvm_read(struct file *file, char __user *user_buf, size_t count,
const u8 *ptr;
char *buf;
u16 eeprom_ver;
size_t eeprom_len = il->cfg->base_params->eeprom_size;
size_t eeprom_len = il->cfg->eeprom_size;
buf_size = 4 * eeprom_len + 256;
if (eeprom_len % 16) {
......@@ -727,7 +727,7 @@ il_dbgfs_traffic_log_read(struct file *file, char __user *user_buf,
char *buf;
int bufsz =
((IL_TRAFFIC_ENTRIES * IL_TRAFFIC_ENTRY_SIZE * 64) * 2) +
(il->cfg->base_params->num_of_queues * 32 * 8) + 400;
(il->cfg->num_of_queues * 32 * 8) + 400;
const u8 *ptr;
ssize_t ret;
......@@ -833,7 +833,7 @@ il_dbgfs_tx_queue_read(struct file *file, char __user *user_buf, size_t count,
int cnt;
int ret;
const size_t bufsz =
sizeof(char) * 64 * il->cfg->base_params->num_of_queues;
sizeof(char) * 64 * il->cfg->num_of_queues;
if (!il->txq) {
IL_ERR("txq not ready\n");
......@@ -1293,7 +1293,7 @@ il_dbgfs_wd_timeout_write(struct file *file, const char __user *user_buf,
if (timeout < 0 || timeout > IL_MAX_WD_TIMEOUT)
timeout = IL_DEF_WD_TIMEOUT;
il->cfg->base_params->wd_timeout = timeout;
il->cfg->wd_timeout = timeout;
il_setup_watchdog(il);
return count;
}
......@@ -1367,17 +1367,17 @@ il_dbgfs_register(struct il_priv *il, const char *name)
DEBUGFS_ADD_FILE(ucode_tx_stats, dir_debug, S_IRUSR);
DEBUGFS_ADD_FILE(ucode_general_stats, dir_debug, S_IRUSR);
if (il->cfg->base_params->sensitivity_calib_by_driver)
if (il->cfg->sensitivity_calib_by_driver)
DEBUGFS_ADD_FILE(sensitivity, dir_debug, S_IRUSR);
if (il->cfg->base_params->chain_noise_calib_by_driver)
if (il->cfg->chain_noise_calib_by_driver)
DEBUGFS_ADD_FILE(chain_noise, dir_debug, S_IRUSR);
DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR);
DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR);
DEBUGFS_ADD_FILE(wd_timeout, dir_debug, S_IWUSR);
if (il->cfg->base_params->sensitivity_calib_by_driver)
if (il->cfg->sensitivity_calib_by_driver)
DEBUGFS_ADD_BOOL(disable_sensitivity, dir_rf,
&il->disable_sens_cal);
if (il->cfg->base_params->chain_noise_calib_by_driver)
if (il->cfg->chain_noise_calib_by_driver)
DEBUGFS_ADD_BOOL(disable_chain_noise, dir_rf,
&il->disable_chain_noise_cal);
DEBUGFS_ADD_BOOL(disable_tx_power, dir_rf, &il->disable_tx_power_cal);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册