- 12 12月, 2011 2 次提交
-
-
由 Frederic Weisbecker 提交于
It is assumed that rcu won't be used once we switch to tickless mode and until we restart the tick. However this is not always true, as in x86-64 where we dereference the idle notifiers after the tick is stopped. To prepare for fixing this, add two new APIs: tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu(). If no use of RCU is made in the idle loop between tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch must instead call the new *_norcu() version such that the arch doesn't need to call rcu_idle_enter() and rcu_idle_exit(). Otherwise the arch must call tick_nohz_enter_idle() and tick_nohz_exit_idle() and also call explicitly: - rcu_idle_enter() after its last use of RCU before the CPU is put to sleep. - rcu_idle_exit() before the first use of RCU after the CPU is woken up. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: David Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Frederic Weisbecker 提交于
The tick_nohz_stop_sched_tick() function, which tries to delay the next timer tick as long as possible, can be called from two places: - From the idle loop to start the dytick idle mode - From interrupt exit if we have interrupted the dyntick idle mode, so that we reprogram the next tick event in case the irq changed some internal state that requires this action. There are only few minor differences between both that are handled by that function, driven by the ts->inidle cpu variable and the inidle parameter. The whole guarantees that we only update the dyntick mode on irq exit if we actually interrupted the dyntick idle mode, and that we enter in RCU extended quiescent state from idle loop entry only. Split this function into: - tick_nohz_idle_enter(), which sets ts->inidle to 1, enters dynticks idle mode unconditionally if it can, and enters into RCU extended quiescent state. - tick_nohz_irq_exit() which only updates the dynticks idle mode when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called). To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed into tick_nohz_idle_exit(). This simplifies the code and micro-optimize the irq exit path (no need for local_irq_save there). This also prepares for the split between dynticks and rcu extended quiescent state logics. We'll need this split to further fix illegal uses of RCU in extended quiescent states in the idle loop. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: David Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
- 16 11月, 2011 2 次提交
-
-
由 Mathias Krause 提交于
The address limit is already set in flush_old_exec() so this set_fs(USER_DS) is redundant. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
-
由 Paul Bolle 提交于
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
-
- 15 11月, 2011 3 次提交
-
-
由 Paul Bolle 提交于
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
-
由 Arnaud Lacombe 提交于
Usage of these flags has been deprecated for nearly 4 years by: commit f77bf014 Author: Sam Ravnborg <sam@neptun.(none)> Date: Mon Oct 15 22:25:06 2007 +0200 kbuild: introduce ccflags-y, asflags-y and ldflags-y Moreover, these flags (at least EXTRA_CFLAGS) have been documented for command line use. By default, gmake(1) do not override command line setting, so this is likely to result in build failure or unexpected behavior. Replace their usage by Kbuild's `{as,cc,ld}flags-y'. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: NArnaud Lacombe <lacombar@gmail.com> Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
-
由 Guan Xuetao 提交于
Remove the __uc32_ prefix in find bitops functions. Move find_* macros behind asm-generic/bitops.h inclusion. see commit <19de85ef> bitops: add #ifndef for each of find bitops also see commit <63e424c8> arch: remove CONFIG_GENERIC_FIND_{NEXT_BIT,BIT_LE,LAST_BIT} Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Cc: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de>
-
- 01 11月, 2011 1 次提交
-
-
由 Axel Lin 提交于
Include export.h to fix below warning: CC arch/unicore32/mm/init.o arch/unicore32/mm/init.c:227: warning: data definition has no type or storage class arch/unicore32/mm/init.c:227: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/unicore32/mm/init.c:227: warning: parameter names (without types) in function declaration Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 28 9月, 2011 1 次提交
-
-
由 Paul Bolle 提交于
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 24 7月, 2011 1 次提交
-
-
由 Jonas Bonn 提交于
This patch removes all the module loader hook implementations in the architecture specific code where the functionality is the same as that now provided by the recently added default hooks. Signed-off-by: NJonas Bonn <jonas@southpole.se> Acked-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Tested-by: NMichal Simek <monstr@monstr.eu> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 22 7月, 2011 1 次提交
-
-
由 Ralf Baechle 提交于
Aside of the usual motivation for constification, this function has a history of being abused a hook for interrupt and other fixups so I turned this function const ages ago in the MIPS code but it should be done treewide. Due to function pointer passing in varous places a few other functions had to be constified as well. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> To: Anton Vorontsov <avorontsov@mvista.com> To: Chris Metcalf <cmetcalf@tilera.com> To: Colin Cross <ccross@android.com> Acked-by: N"David S. Miller" <davem@davemloft.net> To: Eric Miao <eric.y.miao@gmail.com> To: Erik Gilling <konkers@android.com> Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> To: "H. Peter Anvin" <hpa@zytor.com> To: Imre Kaloz <kaloz@openwrt.org> To: Ingo Molnar <mingo@redhat.com> To: Ivan Kokshaysky <ink@jurassic.park.msu.ru> To: Jesse Barnes <jbarnes@virtuousgeek.org> To: Krzysztof Halasa <khc@pm.waw.pl> To: Lennert Buytenhek <kernel@wantstofly.org> To: Matt Turner <mattst88@gmail.com> To: Nicolas Pitre <nico@fluxnic.net> To: Olof Johansson <olof@lixom.net> Acked-by: NPaul Mundt <lethal@linux-sh.org> To: Richard Henderson <rth@twiddle.net> To: Russell King <linux@arm.linux.org.uk> To: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-alpha@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-pci@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: x86@kernel.org Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 09 6月, 2011 5 次提交
-
-
由 Guan Xuetao 提交于
The patch adds one-line asm-generic files in arch/unicore32/include/asm/Kbuild Also, remove the old implementation in arch/unicore32/Makefile see commit from Sam Ravnborg <d8ecc5cd> kbuild: asm-generic support Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Guan Xuetao 提交于
The patch changes PERCPU to PERCPU_SECTION see commit from Tejun Heo <0415b00d> percpu: Always align percpu output section to PAGE_SIZE Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NTejun Heo <tj@kernel.org>
-
由 Guan Xuetao 提交于
Rename debug_defconfig to unicore32_defconfig, which is a minimal config for PKUnity-v3 (130nm) SoC board. Also, add KBUILD_DEFCONFIG to use 'make defconfig'. Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Guan Xuetao 提交于
U-boot will load the kernel image to 48M physical memory address. The patch changes it to the correct address, though it's PIC codes. Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Guan Xuetao 提交于
The patch moves rtc driver for PKUnity-v3 SoC from arch/unicore32/kernel/ to drivers/rtc/, with renaming it to rtc-puv3.c. Also, Kconfig, Makefile, and MAINTAINERS are modified correspondingly. Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 25 5月, 2011 4 次提交
-
-
由 Stephen Boyd 提交于
Most arches define CONFIG_DEBUG_STACK_USAGE exactly the same way. Move it to lib/Kconfig.debug so each arch doesn't have to define it. This obviously makes the option generic, but that's fine because the config is already used in generic code. It's not obvious to me that sysrq-P actually does anything caution by keeping the most inclusive wording. Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NRichard Weinberger <richard@nod.at> Acked-by: NMike Frysinger <vapier@gentoo.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Hirokazu Takata <takata@linux-m32r.org> Acked-by: NRalf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Fold all the mmu_gather rework patches into one for submission Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: NHugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
Architectures that implement their own show_mem() function did not pass the filter argument to show_free_areas() to appropriately avoid emitting the state of nodes that are disallowed in the current context. This patch now passes the filter argument to show_free_areas() so those nodes are now avoided. This patch also removes the show_free_areas() wrapper around __show_free_areas() and converts existing callers to pass an empty filter. ia64 emits additional information for each node, so skip_free_areas_zone() must be made global to filter disallowed nodes and it is converted to use a nid argument rather than a zone for this use case. Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <jejb@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
All architectures supporting hibernation define arch_prepare_suspend() as an empty function, so remove it. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 14 5月, 2011 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
On some arches (x86, sh, arm, unicore, powerpc) the oops message would print out the last sysfs file accessed. This was very useful in finding a number of sysfs and driver core bugs in the 2.5 and early 2.6 development days, but it has been a number of years since this file has actually helped in debugging anything that couldn't also be trivially determined from the stack traceback. So it's time to delete the line. This is good as we need all the space we can get for oops messages at times on consoles. Acked-by: NPhil Carmody <ext-phil.2.carmody@nokia.com> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 5月, 2011 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Make some UNICORE32 architecture's code use struct syscore_ops objects for power management instead of sysdev classes and sysdevs. This simplifies the code and reduces the kernel's memory footprint. It also is necessary for removing sysdevs from the kernel entirely in the future. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
-
- 02 4月, 2011 5 次提交
-
-
由 Guan Xuetao 提交于
1. get videomemory by __get_free_pages() in fb-puv3.c 2. remove resource reservation for old fixed UNIGFX_MMAP & UVC_MMAP space 3. remove unused macros: PKUNTIY_UNIGFX_MMAP_BASE, PKUNITY_UNIGFX_MMAP_SIZE, PKUNITY_UVC_MMAP_BASE, PKUNITY_UVC_MMAP_SIZE and KUSER_UNIGFX_BASE 4. remove unused header linux/vmalloc.h in fb-puv3.h Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in arch/unicore32/kernel/traps.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
-
由 Guan Xuetao 提交于
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
-
由 Guan Xuetao 提交于
The futex functions in unicore32 are not used and verified, so just replaced by asm-generic version. Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Guan Xuetao 提交于
Also, adjust cacheline parameter of RW_DATA_SECTION and EXCEPTION_TABLE Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 30 3月, 2011 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 29 3月, 2011 2 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Scripted with coccinelle. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 25 3月, 2011 1 次提交
-
-
由 David Rientjes 提交于
Commit ddd588b5 ("oom: suppress nodes that are not allowed from meminfo on oom kill") moved lib/show_mem.o out of lib/lib.a, which resulted in build warnings on all architectures that implement their own versions of show_mem(): lib/lib.a(show_mem.o): In function `show_mem': show_mem.c:(.text+0x1f4): multiple definition of `show_mem' arch/sparc/mm/built-in.o:(.text+0xd70): first defined here The fix is to remove __show_mem() and add its argument to show_mem() in all implementations to prevent this breakage. Architectures that implement their own show_mem() actually don't do anything with the argument yet, but they could be made to filter nodes that aren't allowed in the current context in the future just like the generic implementation. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Reported-by: NJames Bottomley <James.Bottomley@hansenpartnership.com> Suggested-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 3月, 2011 8 次提交
-
-
由 GuanXuetao 提交于
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
-
由 GuanXuetao 提交于
1. remove __REG macro 2. add (void __iomem *) to io_p2v macro 3. add (phys_addr_t) to io_v2p macro 4. add PKUNITY_AHB_BASE and PKUNITY_APB_BASE definitions 5. modify all PKUNITY_mmio_BASEs from physical addr to virtual addr 6. adjust prefix macro for all usage of PKUNITY_mmio_BASEs -- by advice with Arnd Bergmann Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Reviewed-by: NArnd Bergmann <arnd@arndb.de>
-
由 GuanXuetao 提交于
1. define and enable CONFIG_GENERIC_IOMAP 2. define unicore32-specific PCI_IOBASE for asm-generic/io.h 3. define HAVE_ARCH_PIO_SIZE and unicore32-specific PIO_* macros 4. remove all unicore32-specific iomap functions Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Reviewed-and-Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 GuanXuetao 提交于
change from original version -- by advice of Paul Mundt 1. remove videomemorysize definitions 2. remove unifb_enable and unifb_setup 3. use dev_warn instead of printk in fb driver 4. remove judgement for FB_ACCEL_PUV3_UNIGFX 5. adjust clk_get and clk_set_rate calls 6. add resources definitions 7. remove unifb_option 8. adjust register for platform_device 9. adjust unifb_ops position and unifb_regs assignment position Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 GuanXuetao 提交于
change from original version -- by advice of Jean Delvare 1. remove global variable i2c_reg, replaced by local variables 2. replace ENXIO with ENODEV when no platform resources 3. add adapter->nr assignment before i2c_add_numbered_adapter() call 4. add judgement for i2c_del_adapter() return value 5. release adapter when driver removed 6. add __devexit for puv3_i2c_remove() function 7. modify several names to more appropriated ones Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 GuanXuetao 提交于
-- by advice of Arnd Bergmann Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Reviewed-by: NArnd Bergmann <arnd@arndb.de>
-
由 GuanXuetao 提交于
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
-
由 GuanXuetao 提交于
for the term IOSPACE normally refers to the PCI PIO space -- by advice with Arnd Bergmann Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
-