Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 1cf46c42 编写于 作者: G GuanXuetao
浏览文件
操作

unicore32: modify io_p2v and io_v2p macros, and adjust PKUNITY_mmio_BASEs 

1. remove __REG macro
2. add (void __iomem *) to io_p2v macro
3. add (phys_addr_t) to io_v2p macro
4. add PKUNITY_AHB_BASE and PKUNITY_APB_BASE definitions
5. modify all PKUNITY_mmio_BASEs from physical addr to virtual addr
6. adjust prefix macro for all usage of PKUNITY_mmio_BASEs
  -- by advice with Arnd Bergmann
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
上级 4fde87cb
隐藏空白更改
内联 并排
Showing with 365 addition and 362 deletion
arch/unicore32/include/asm/io.h
浏览文件 @ 1cf46c42
......@@ -18,7 +18,7 @@
#include <asm/memory.h>
#include <asm/system.h>
#define PCI_IOBASE io_p2v(PKUNITY_PCILIO_BASE)
#define PCI_IOBASE PKUNITY_PCILIO_BASE
#include <asm-generic/io.h>
/*
......
arch/unicore32/include/mach/PKUnity.h
浏览文件 @ 1cf46c42
......@@ -22,83 +22,87 @@
*/
#define PKUNITY_SDRAM_BASE 0x00000000 /* 0x00000000 - 0x7FFFFFFF 2GB */
#define PKUNITY_MMIO_BASE 0x80000000 /* 0x80000000 - 0xFFFFFFFF 2GB */
#define PKUNITY_PCI_BASE 0x80000000 /* 0x80000000 - 0xBFFFFFFF 1GB */
#include "regs-pci.h"
#define PKUNITY_BOOT_ROM2_BASE 0xF4000000 /* 0xF4000000 - 0xF7FFFFFF 64MB */
#define PKUNITY_BOOT_SRAM2_BASE 0xF8000000 /* 0xF8000000 - 0xFBFFFFFF 64MB */
#define PKUNITY_BOOT_FLASH_BASE 0xFC000000 /* 0xFC000000 - 0xFFFFFFFF 64MB */
/*
* PKUNITY Memory Map Addresses: 0x0D000000 - 0x0EFFFFFF (32MB)
* 0x0D000000 - 0x0DFFFFFF 16MB: for UVC
* 0x0E000000 - 0x0EFFFFFF 16MB: for UNIGFX
*/
#define PKUNITY_UVC_MMAP_BASE 0x0D000000 /* 0x0D000000 - 0x0DFFFFFF 16MB */
#define PKUNITY_UVC_MMAP_BASE 0x0D000000
#define PKUNITY_UVC_MMAP_SIZE 0x01000000 /* 16MB */
#define PKUNITY_UNIGFX_MMAP_BASE 0x0E000000 /* 0x0E000000 - 0x0EFFFFFF 16MB */
#define PKUNITY_UNIGFX_MMAP_BASE 0x0E000000
#define PKUNITY_UNIGFX_MMAP_SIZE 0x01000000 /* 16MB */
/*
* PKUNITY System Bus Addresses (PCI): 0x80000000 - 0xBFFFFFFF (1GB)
* 0x80000000 - 0x8000000B 12B PCI Configuration regs
* 0x80010000 - 0x80010250 592B PCI Bridge Base
* 0x80030000 - 0x8003FFFF 64KB PCI Legacy IO
* 0x90000000 - 0x97FFFFFF 128MB PCI AHB-PCI MEM-mapping
* 0x98000000 - 0x9FFFFFFF 128MB PCI PCI-AHB MEM-mapping
*/
/* PCI Configuration regs */
#define PKUNITY_PCICFG_BASE 0x80000000 /* 0x80000000 - 0x8000000B 12B */
/* PCI Bridge Base */
#define PKUNITY_PCIBRI_BASE 0x80010000 /* 0x80010000 - 0x80010250 592B */
/* PCI Legacy IO */
#define PKUNITY_PCILIO_BASE 0x80030000 /* 0x80030000 - 0x8003FFFF 64KB */
/* PCI AHB-PCI MEM-mapping */
#define PKUNITY_PCIMEM_BASE 0x90000000 /* 0x90000000 - 0x97FFFFFF 128MB */
/* PCI PCI-AHB MEM-mapping */
#define PKUNITY_PCIAHB_BASE 0x98000000 /* 0x98000000 - 0x9FFFFFFF 128MB */
#define PKUNITY_PCI_BASE io_p2v(0x80000000) /* 0x80000000 - 0xBFFFFFFF 1GB */
#include "regs-pci.h"
#define PKUNITY_PCICFG_BASE (PKUNITY_PCI_BASE + 0x0)
#define PKUNITY_PCIBRI_BASE (PKUNITY_PCI_BASE + 0x00010000)
#define PKUNITY_PCILIO_BASE (PKUNITY_PCI_BASE + 0x00030000)
#define PKUNITY_PCIMEM_BASE (PKUNITY_PCI_BASE + 0x10000000)
#define PKUNITY_PCIAHB_BASE (PKUNITY_PCI_BASE + 0x18000000)
/*
* PKUNITY System Bus Addresses (AHB): 0xC0000000 - 0xEDFFFFFF (640MB)
*/
#define PKUNITY_AHB_BASE io_p2v(0xC0000000)
/* AHB-0 is DDR2 SDRAM */
/* AHB-1 is PCI Space */
#define PKUNITY_ARBITER_BASE 0xC0000000 /* AHB-2 */
#define PKUNITY_DDR2CTRL_BASE 0xC0100000 /* AHB-3 */
#define PKUNITY_DMAC_BASE 0xC0200000 /* AHB-4 */
#define PKUNITY_ARBITER_BASE (PKUNITY_AHB_BASE + 0x000000) /* AHB-2 */
#define PKUNITY_DDR2CTRL_BASE (PKUNITY_AHB_BASE + 0x100000) /* AHB-3 */
#define PKUNITY_DMAC_BASE (PKUNITY_AHB_BASE + 0x200000) /* AHB-4 */
#include "regs-dmac.h"
#define PKUNITY_UMAL_BASE 0xC0300000 /* AHB-5 */
#define PKUNITY_UMAL_BASE (PKUNITY_AHB_BASE + 0x300000) /* AHB-5 */
#include "regs-umal.h"
#define PKUNITY_USB_BASE 0xC0400000 /* AHB-6 */
#define PKUNITY_SATA_BASE 0xC0500000 /* AHB-7 */
#define PKUNITY_SMC_BASE 0xC0600000 /* AHB-8 */
#define PKUNITY_USB_BASE (PKUNITY_AHB_BASE + 0x400000) /* AHB-6 */
#define PKUNITY_SATA_BASE (PKUNITY_AHB_BASE + 0x500000) /* AHB-7 */
#define PKUNITY_SMC_BASE (PKUNITY_AHB_BASE + 0x600000) /* AHB-8 */
/* AHB-9 is for APB bridge */
#define PKUNITY_MME_BASE 0xC0700000 /* AHB-10 */
#define PKUNITY_UNIGFX_BASE 0xC0800000 /* AHB-11 */
#define PKUNITY_MME_BASE (PKUNITY_AHB_BASE + 0x700000) /* AHB-10 */
#define PKUNITY_UNIGFX_BASE (PKUNITY_AHB_BASE + 0x800000) /* AHB-11 */
#include "regs-unigfx.h"
#define PKUNITY_NAND_BASE 0xC0900000 /* AHB-12 */
#define PKUNITY_NAND_BASE (PKUNITY_AHB_BASE + 0x900000) /* AHB-12 */
#include "regs-nand.h"
#define PKUNITY_H264D_BASE 0xC0A00000 /* AHB-13 */
#define PKUNITY_H264E_BASE 0xC0B00000 /* AHB-14 */
#define PKUNITY_H264D_BASE (PKUNITY_AHB_BASE + 0xA00000) /* AHB-13 */
#define PKUNITY_H264E_BASE (PKUNITY_AHB_BASE + 0xB00000) /* AHB-14 */
/*
* PKUNITY Peripheral Bus Addresses (APB): 0xEE000000 - 0xEFFFFFFF (128MB)
*/
#define PKUNITY_UART0_BASE 0xEE000000 /* APB-0 */
#define PKUNITY_UART1_BASE 0xEE100000 /* APB-1 */
#define PKUNITY_APB_BASE io_p2v(0xEE000000)
#define PKUNITY_UART0_BASE (PKUNITY_APB_BASE + 0x000000) /* APB-0 */
#define PKUNITY_UART1_BASE (PKUNITY_APB_BASE + 0x100000) /* APB-1 */
#include "regs-uart.h"
#define PKUNITY_I2C_BASE 0xEE200000 /* APB-2 */
#define PKUNITY_I2C_BASE (PKUNITY_APB_BASE + 0x200000) /* APB-2 */
#include "regs-i2c.h"
#define PKUNITY_SPI_BASE 0xEE300000 /* APB-3 */
#define PKUNITY_SPI_BASE (PKUNITY_APB_BASE + 0x300000) /* APB-3 */
#include "regs-spi.h"
#define PKUNITY_AC97_BASE 0xEE400000 /* APB-4 */
#define PKUNITY_AC97_BASE (PKUNITY_APB_BASE + 0x400000) /* APB-4 */
#include "regs-ac97.h"
#define PKUNITY_GPIO_BASE 0xEE500000 /* APB-5 */
#define PKUNITY_GPIO_BASE (PKUNITY_APB_BASE + 0x500000) /* APB-5 */
#include "regs-gpio.h"
#define PKUNITY_INTC_BASE 0xEE600000 /* APB-6 */
#define PKUNITY_INTC_BASE (PKUNITY_APB_BASE + 0x600000) /* APB-6 */
#include "regs-intc.h"
#define PKUNITY_RTC_BASE 0xEE700000 /* APB-7 */
#define PKUNITY_RTC_BASE (PKUNITY_APB_BASE + 0x700000) /* APB-7 */
#include "regs-rtc.h"
#define PKUNITY_OST_BASE 0xEE800000 /* APB-8 */
#define PKUNITY_OST_BASE (PKUNITY_APB_BASE + 0x800000) /* APB-8 */
#include "regs-ost.h"
#define PKUNITY_RESETC_BASE 0xEE900000 /* APB-9 */
#define PKUNITY_RESETC_BASE (PKUNITY_APB_BASE + 0x900000) /* APB-9 */
#include "regs-resetc.h"
#define PKUNITY_PM_BASE 0xEEA00000 /* APB-10 */
#define PKUNITY_PM_BASE (PKUNITY_APB_BASE + 0xA00000) /* APB-10 */
#include "regs-pm.h"
#define PKUNITY_PS2_BASE 0xEEB00000 /* APB-11 */
#define PKUNITY_PS2_BASE (PKUNITY_APB_BASE + 0xB00000) /* APB-11 */
#include "regs-ps2.h"
#define PKUNITY_SDC_BASE 0xEEC00000 /* APB-12 */
#define PKUNITY_SDC_BASE (PKUNITY_APB_BASE + 0xC00000) /* APB-12 */
#include "regs-sdc.h"
arch/unicore32/include/mach/hardware.h
浏览文件 @ 1cf46c42
......@@ -17,17 +17,16 @@
#include "PKUnity.h"
#ifndef __ASSEMBLY__
#define io_p2v(x) (void __iomem *)((x) - PKUNITY_MMIO_BASE)
#define io_v2p(x) (phys_addr_t)((x) + PKUNITY_MMIO_BASE)
#else
#define io_p2v(x) ((x) - PKUNITY_MMIO_BASE)
#define io_v2p(x) ((x) + PKUNITY_MMIO_BASE)
#ifndef __ASSEMBLY__
# define __REG(x) (void __iomem *)io_p2v(x)
#endif
#define PCIBIOS_MIN_IO 0x4000 /* should lower than 64KB */
#define PCIBIOS_MIN_MEM PKUNITY_PCIMEM_BASE
#define PCIBIOS_MIN_MEM io_v2p(PKUNITY_PCIMEM_BASE)
/*
* We override the standard dma-mask routines for bouncing.
......
arch/unicore32/include/mach/memory.h
浏览文件 @ 1cf46c42
......@@ -45,8 +45,8 @@ void puv3_pci_adjust_zones(unsigned long *size, unsigned long *holes);
#define is_pcibus_device(dev) (dev && \
(strncmp(dev->bus->name, "pci", 3) == 0))
#define __virt_to_pcibus(x) (__virt_to_phys(x) + PKUNITY_PCIAHB_BASE)
#define __pcibus_to_virt(x) __phys_to_virt((x) - PKUNITY_PCIAHB_BASE)
#define __virt_to_pcibus(x) (__virt_to_phys((x) + PKUNITY_PCIAHB_BASE))
#define __pcibus_to_virt(x) (__phys_to_virt(x) - PKUNITY_PCIAHB_BASE)
/* kuser area */
#define KUSER_VECPAGE_BASE (KUSER_BASE + UL(0x3fff0000))
......
arch/unicore32/include/mach/regs-ac97.h
浏览文件 @ 1cf46c42
......@@ -2,16 +2,16 @@
* PKUnity AC97 Registers
*/
#define PKUNITY_AC97_CONR __REG(PKUNITY_AC97_BASE + 0x0000)
#define PKUNITY_AC97_OCR __REG(PKUNITY_AC97_BASE + 0x0004)
#define PKUNITY_AC97_ICR __REG(PKUNITY_AC97_BASE + 0x0008)
#define PKUNITY_AC97_CRAC __REG(PKUNITY_AC97_BASE + 0x000C)
#define PKUNITY_AC97_INTR __REG(PKUNITY_AC97_BASE + 0x0010)
#define PKUNITY_AC97_INTRSTAT __REG(PKUNITY_AC97_BASE + 0x0014)
#define PKUNITY_AC97_INTRCLEAR __REG(PKUNITY_AC97_BASE + 0x0018)
#define PKUNITY_AC97_ENABLE __REG(PKUNITY_AC97_BASE + 0x001C)
#define PKUNITY_AC97_OUT_FIFO __REG(PKUNITY_AC97_BASE + 0x0020)
#define PKUNITY_AC97_IN_FIFO __REG(PKUNITY_AC97_BASE + 0x0030)
#define PKUNITY_AC97_CONR (PKUNITY_AC97_BASE + 0x0000)
#define PKUNITY_AC97_OCR (PKUNITY_AC97_BASE + 0x0004)
#define PKUNITY_AC97_ICR (PKUNITY_AC97_BASE + 0x0008)
#define PKUNITY_AC97_CRAC (PKUNITY_AC97_BASE + 0x000C)
#define PKUNITY_AC97_INTR (PKUNITY_AC97_BASE + 0x0010)
#define PKUNITY_AC97_INTRSTAT (PKUNITY_AC97_BASE + 0x0014)
#define PKUNITY_AC97_INTRCLEAR (PKUNITY_AC97_BASE + 0x0018)
#define PKUNITY_AC97_ENABLE (PKUNITY_AC97_BASE + 0x001C)
#define PKUNITY_AC97_OUT_FIFO (PKUNITY_AC97_BASE + 0x0020)
#define PKUNITY_AC97_IN_FIFO (PKUNITY_AC97_BASE + 0x0030)
#define AC97_CODEC_REG(v) FIELD((v), 7, 16)
#define AC97_CODEC_VAL(v) FIELD((v), 16, 0)
......
arch/unicore32/include/mach/regs-dmac.h
浏览文件 @ 1cf46c42
......@@ -5,27 +5,27 @@
/*
* Interrupt Status Reg DMAC_ISR.
*/
#define DMAC_ISR __REG(PKUNITY_DMAC_BASE + 0x0020)
#define DMAC_ISR (PKUNITY_DMAC_BASE + 0x0020)
/*
* Interrupt Transfer Complete Status Reg DMAC_ITCSR.
*/
#define DMAC_ITCSR __REG(PKUNITY_DMAC_BASE + 0x0050)
#define DMAC_ITCSR (PKUNITY_DMAC_BASE + 0x0050)
/*
* Interrupt Transfer Complete Clear Reg DMAC_ITCCR.
*/
#define DMAC_ITCCR __REG(PKUNITY_DMAC_BASE + 0x0060)
#define DMAC_ITCCR (PKUNITY_DMAC_BASE + 0x0060)
/*
* Interrupt Error Status Reg DMAC_IESR.
*/
#define DMAC_IESR __REG(PKUNITY_DMAC_BASE + 0x0080)
#define DMAC_IESR (PKUNITY_DMAC_BASE + 0x0080)
/*
* Interrupt Error Clear Reg DMAC_IECR.
*/
#define DMAC_IECR __REG(PKUNITY_DMAC_BASE + 0x0090)
#define DMAC_IECR (PKUNITY_DMAC_BASE + 0x0090)
/*
* Enable Channels Reg DMAC_ENCH.
*/
#define DMAC_ENCH __REG(PKUNITY_DMAC_BASE + 0x00B0)
#define DMAC_ENCH (PKUNITY_DMAC_BASE + 0x00B0)
/*
* DMA control reg. Space [byte]
......@@ -35,19 +35,19 @@
/*
* Source Addr DMAC_SRCADDR(ch).
*/
#define DMAC_SRCADDR(ch) __REG(PKUNITY_DMAC_BASE + (ch)*DMASp + 0x00)
#define DMAC_SRCADDR(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x00)
/*
* Destination Addr DMAC_DESTADDR(ch).
*/
#define DMAC_DESTADDR(ch) __REG(PKUNITY_DMAC_BASE + (ch)*DMASp + 0x04)
#define DMAC_DESTADDR(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x04)
/*
* Control Reg DMAC_CONTROL(ch).
*/
#define DMAC_CONTROL(ch) __REG(PKUNITY_DMAC_BASE + (ch)*DMASp + 0x0C)
#define DMAC_CONTROL(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x0C)
/*
* Configuration Reg DMAC_CONFIG(ch).
*/
#define DMAC_CONFIG(ch) __REG(PKUNITY_DMAC_BASE + (ch)*DMASp + 0x10)
#define DMAC_CONFIG(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x10)
#define DMAC_IR_MASK FMASK(6, 0)
/*
......
arch/unicore32/include/mach/regs-gpio.h
浏览文件 @ 1cf46c42
......@@ -5,35 +5,35 @@
/*
* Voltage Status Reg GPIO_GPLR.
*/
#define GPIO_GPLR __REG(PKUNITY_GPIO_BASE + 0x0000)
#define GPIO_GPLR (PKUNITY_GPIO_BASE + 0x0000)
/*
* Pin Direction Reg GPIO_GPDR.
*/
#define GPIO_GPDR __REG(PKUNITY_GPIO_BASE + 0x0004)
#define GPIO_GPDR (PKUNITY_GPIO_BASE + 0x0004)
/*
* Output Pin Set Reg GPIO_GPSR.
*/
#define GPIO_GPSR __REG(PKUNITY_GPIO_BASE + 0x0008)
#define GPIO_GPSR (PKUNITY_GPIO_BASE + 0x0008)
/*
* Output Pin Clear Reg GPIO_GPCR.
*/
#define GPIO_GPCR __REG(PKUNITY_GPIO_BASE + 0x000C)
#define GPIO_GPCR (PKUNITY_GPIO_BASE + 0x000C)
/*
* Raise Edge Detect Reg GPIO_GRER.
*/
#define GPIO_GRER __REG(PKUNITY_GPIO_BASE + 0x0010)
#define GPIO_GRER (PKUNITY_GPIO_BASE + 0x0010)
/*
* Fall Edge Detect Reg GPIO_GFER.
*/
#define GPIO_GFER __REG(PKUNITY_GPIO_BASE + 0x0014)
#define GPIO_GFER (PKUNITY_GPIO_BASE + 0x0014)
/*
* Edge Status Reg GPIO_GEDR.
*/
#define GPIO_GEDR __REG(PKUNITY_GPIO_BASE + 0x0018)
#define GPIO_GEDR (PKUNITY_GPIO_BASE + 0x0018)
/*
* Sepcial Voltage Detect Reg GPIO_GPIR.
*/
#define GPIO_GPIR __REG(PKUNITY_GPIO_BASE + 0x0020)
#define GPIO_GPIR (PKUNITY_GPIO_BASE + 0x0020)
#define GPIO_MIN (0)
#define GPIO_MAX (27)
......
arch/unicore32/include/mach/regs-i2c.h
浏览文件 @ 1cf46c42
......@@ -5,35 +5,35 @@
/*
* Control Reg I2C_CON.
*/
#define I2C_CON __REG(PKUNITY_I2C_BASE + 0x0000)
#define I2C_CON (PKUNITY_I2C_BASE + 0x0000)
/*
* Target Address Reg I2C_TAR.
*/
#define I2C_TAR __REG(PKUNITY_I2C_BASE + 0x0004)
#define I2C_TAR (PKUNITY_I2C_BASE + 0x0004)
/*
* Data buffer and command Reg I2C_DATACMD.
*/
#define I2C_DATACMD __REG(PKUNITY_I2C_BASE + 0x0010)
#define I2C_DATACMD (PKUNITY_I2C_BASE + 0x0010)
/*
* Enable Reg I2C_ENABLE.
*/
#define I2C_ENABLE __REG(PKUNITY_I2C_BASE + 0x006C)
#define I2C_ENABLE (PKUNITY_I2C_BASE + 0x006C)
/*
* Status Reg I2C_STATUS.
*/
#define I2C_STATUS __REG(PKUNITY_I2C_BASE + 0x0070)
#define I2C_STATUS (PKUNITY_I2C_BASE + 0x0070)
/*
* Tx FIFO Length Reg I2C_TXFLR.
*/
#define I2C_TXFLR __REG(PKUNITY_I2C_BASE + 0x0074)
#define I2C_TXFLR (PKUNITY_I2C_BASE + 0x0074)
/*
* Rx FIFO Length Reg I2C_RXFLR.
*/
#define I2C_RXFLR __REG(PKUNITY_I2C_BASE + 0x0078)
#define I2C_RXFLR (PKUNITY_I2C_BASE + 0x0078)
/*
* Enable Status Reg I2C_ENSTATUS.
*/
#define I2C_ENSTATUS __REG(PKUNITY_I2C_BASE + 0x009C)
#define I2C_ENSTATUS (PKUNITY_I2C_BASE + 0x009C)
#define I2C_CON_MASTER FIELD(1, 1, 0)
#define I2C_CON_SPEED_STD FIELD(1, 2, 1)
......
arch/unicore32/include/mach/regs-intc.h
浏览文件 @ 1cf46c42
......@@ -4,25 +4,25 @@
/*
* INTC Level Reg INTC_ICLR.
*/
#define INTC_ICLR __REG(PKUNITY_INTC_BASE + 0x0000)
#define INTC_ICLR (PKUNITY_INTC_BASE + 0x0000)
/*
* INTC Mask Reg INTC_ICMR.
*/
#define INTC_ICMR __REG(PKUNITY_INTC_BASE + 0x0004)
#define INTC_ICMR (PKUNITY_INTC_BASE + 0x0004)
/*
* INTC Pending Reg INTC_ICPR.
*/
#define INTC_ICPR __REG(PKUNITY_INTC_BASE + 0x0008)
#define INTC_ICPR (PKUNITY_INTC_BASE + 0x0008)
/*
* INTC IRQ Pending Reg INTC_ICIP.
*/
#define INTC_ICIP __REG(PKUNITY_INTC_BASE + 0x000C)
#define INTC_ICIP (PKUNITY_INTC_BASE + 0x000C)
/*
* INTC REAL Pending Reg INTC_ICFP.
*/
#define INTC_ICFP __REG(PKUNITY_INTC_BASE + 0x0010)
#define INTC_ICFP (PKUNITY_INTC_BASE + 0x0010)
/*
* INTC Control Reg INTC_ICCR.
*/
#define INTC_ICCR __REG(PKUNITY_INTC_BASE + 0x0014)
#define INTC_ICCR (PKUNITY_INTC_BASE + 0x0014)
arch/unicore32/include/mach/regs-nand.h
浏览文件 @ 1cf46c42
......@@ -4,67 +4,67 @@
/*
* ID Reg. 0 NAND_IDR0
*/
#define NAND_IDR0 __REG(PKUNITY_NAND_BASE + 0x0000)
#define NAND_IDR0 (PKUNITY_NAND_BASE + 0x0000)
/*
* ID Reg. 1 NAND_IDR1
*/
#define NAND_IDR1 __REG(PKUNITY_NAND_BASE + 0x0004)
#define NAND_IDR1 (PKUNITY_NAND_BASE + 0x0004)
/*
* ID Reg. 2 NAND_IDR2
*/
#define NAND_IDR2 __REG(PKUNITY_NAND_BASE + 0x0008)
#define NAND_IDR2 (PKUNITY_NAND_BASE + 0x0008)
/*
* ID Reg. 3 NAND_IDR3
*/
#define NAND_IDR3 __REG(PKUNITY_NAND_BASE + 0x000C)
#define NAND_IDR3 (PKUNITY_NAND_BASE + 0x000C)
/*
* Page Address Reg 0 NAND_PAR0
*/
#define NAND_PAR0 __REG(PKUNITY_NAND_BASE + 0x0010)
#define NAND_PAR0 (PKUNITY_NAND_BASE + 0x0010)
/*
* Page Address Reg 1 NAND_PAR1
*/
#define NAND_PAR1 __REG(PKUNITY_NAND_BASE + 0x0014)
#define NAND_PAR1 (PKUNITY_NAND_BASE + 0x0014)
/*
* Page Address Reg 2 NAND_PAR2
*/
#define NAND_PAR2 __REG(PKUNITY_NAND_BASE + 0x0018)
#define NAND_PAR2 (PKUNITY_NAND_BASE + 0x0018)
/*
* ECC Enable Reg NAND_ECCEN
*/
#define NAND_ECCEN __REG(PKUNITY_NAND_BASE + 0x001C)
#define NAND_ECCEN (PKUNITY_NAND_BASE + 0x001C)
/*
* Buffer Reg NAND_BUF
*/
#define NAND_BUF __REG(PKUNITY_NAND_BASE + 0x0020)
#define NAND_BUF (PKUNITY_NAND_BASE + 0x0020)
/*
* ECC Status Reg NAND_ECCSR
*/
#define NAND_ECCSR __REG(PKUNITY_NAND_BASE + 0x0024)
#define NAND_ECCSR (PKUNITY_NAND_BASE + 0x0024)
/*
* Command Reg NAND_CMD
*/
#define NAND_CMD __REG(PKUNITY_NAND_BASE + 0x0028)
#define NAND_CMD (PKUNITY_NAND_BASE + 0x0028)
/*
* DMA Configure Reg NAND_DMACR
*/
#define NAND_DMACR __REG(PKUNITY_NAND_BASE + 0x002C)
#define NAND_DMACR (PKUNITY_NAND_BASE + 0x002C)
/*
* Interrupt Reg NAND_IR
*/
#define NAND_IR __REG(PKUNITY_NAND_BASE + 0x0030)
#define NAND_IR (PKUNITY_NAND_BASE + 0x0030)
/*
* Interrupt Mask Reg NAND_IMR
*/
#define NAND_IMR __REG(PKUNITY_NAND_BASE + 0x0034)
#define NAND_IMR (PKUNITY_NAND_BASE + 0x0034)
/*
* Chip Enable Reg NAND_CHIPEN
*/
#define NAND_CHIPEN __REG(PKUNITY_NAND_BASE + 0x0038)
#define NAND_CHIPEN (PKUNITY_NAND_BASE + 0x0038)
/*
* Address Reg NAND_ADDR
*/
#define NAND_ADDR __REG(PKUNITY_NAND_BASE + 0x003C)
#define NAND_ADDR (PKUNITY_NAND_BASE + 0x003C)
/*
* Command bits NAND_CMD_CMD_MASK
......
arch/unicore32/include/mach/regs-ost.h
浏览文件 @ 1cf46c42
......@@ -4,47 +4,47 @@
/*
* Match Reg 0 OST_OSMR0
*/
#define OST_OSMR0 __REG(PKUNITY_OST_BASE + 0x0000)
#define OST_OSMR0 (PKUNITY_OST_BASE + 0x0000)
/*
* Match Reg 1 OST_OSMR1
*/
#define OST_OSMR1 __REG(PKUNITY_OST_BASE + 0x0004)
#define OST_OSMR1 (PKUNITY_OST_BASE + 0x0004)
/*
* Match Reg 2 OST_OSMR2
*/
#define OST_OSMR2 __REG(PKUNITY_OST_BASE + 0x0008)
#define OST_OSMR2 (PKUNITY_OST_BASE + 0x0008)
/*
* Match Reg 3 OST_OSMR3
*/
#define OST_OSMR3 __REG(PKUNITY_OST_BASE + 0x000C)
#define OST_OSMR3 (PKUNITY_OST_BASE + 0x000C)
/*
* Counter Reg OST_OSCR
*/
#define OST_OSCR __REG(PKUNITY_OST_BASE + 0x0010)
#define OST_OSCR (PKUNITY_OST_BASE + 0x0010)
/*
* Status Reg OST_OSSR
*/
#define OST_OSSR __REG(PKUNITY_OST_BASE + 0x0014)
#define OST_OSSR (PKUNITY_OST_BASE + 0x0014)
/*
* Watchdog Enable Reg OST_OWER
*/
#define OST_OWER __REG(PKUNITY_OST_BASE + 0x0018)
#define OST_OWER (PKUNITY_OST_BASE + 0x0018)
/*
* Interrupt Enable Reg OST_OIER
*/
#define OST_OIER __REG(PKUNITY_OST_BASE + 0x001C)
#define OST_OIER (PKUNITY_OST_BASE + 0x001C)
/*
* PWM Pulse Width Control Reg OST_PWMPWCR
*/
#define OST_PWMPWCR __REG(PKUNITY_OST_BASE + 0x0080)
#define OST_PWMPWCR (PKUNITY_OST_BASE + 0x0080)
/*
* PWM Duty Cycle Control Reg OST_PWMDCCR
*/
#define OST_PWMDCCR __REG(PKUNITY_OST_BASE + 0x0084)
#define OST_PWMDCCR (PKUNITY_OST_BASE + 0x0084)
/*
* PWM Period Control Reg OST_PWMPCR
*/
#define OST_PWMPCR __REG(PKUNITY_OST_BASE + 0x0088)
#define OST_PWMPCR (PKUNITY_OST_BASE + 0x0088)
/*
* Match detected 0 OST_OSSR_M0
......
arch/unicore32/include/mach/regs-pci.h
浏览文件 @ 1cf46c42
......@@ -8,79 +8,79 @@
/*
* PCICFG Bridge Base Reg.
*/
#define PCICFG_BRIBASE __REG(PKUNITY_PCICFG_BASE + 0x0000)
#define PCICFG_BRIBASE (PKUNITY_PCICFG_BASE + 0x0000)
/*
* PCICFG Address Reg.
*/
#define PCICFG_ADDR __REG(PKUNITY_PCICFG_BASE + 0x0004)
#define PCICFG_ADDR (PKUNITY_PCICFG_BASE + 0x0004)
/*
* PCICFG Address Reg.
*/
#define PCICFG_DATA __REG(PKUNITY_PCICFG_BASE + 0x0008)
#define PCICFG_DATA (PKUNITY_PCICFG_BASE + 0x0008)
/*
* PCI Bridge configuration space
*/
#define PCIBRI_ID __REG(PKUNITY_PCIBRI_BASE + 0x0000)
#define PCIBRI_CMD __REG(PKUNITY_PCIBRI_BASE + 0x0004)
#define PCIBRI_CLASS __REG(PKUNITY_PCIBRI_BASE + 0x0008)
#define PCIBRI_LTR __REG(PKUNITY_PCIBRI_BASE + 0x000C)
#define PCIBRI_BAR0 __REG(PKUNITY_PCIBRI_BASE + 0x0010)
#define PCIBRI_BAR1 __REG(PKUNITY_PCIBRI_BASE + 0x0014)
#define PCIBRI_BAR2 __REG(PKUNITY_PCIBRI_BASE + 0x0018)
#define PCIBRI_BAR3 __REG(PKUNITY_PCIBRI_BASE + 0x001C)
#define PCIBRI_BAR4 __REG(PKUNITY_PCIBRI_BASE + 0x0020)
#define PCIBRI_BAR5 __REG(PKUNITY_PCIBRI_BASE + 0x0024)
#define PCIBRI_ID (PKUNITY_PCIBRI_BASE + 0x0000)
#define PCIBRI_CMD (PKUNITY_PCIBRI_BASE + 0x0004)
#define PCIBRI_CLASS (PKUNITY_PCIBRI_BASE + 0x0008)
#define PCIBRI_LTR (PKUNITY_PCIBRI_BASE + 0x000C)
#define PCIBRI_BAR0 (PKUNITY_PCIBRI_BASE + 0x0010)
#define PCIBRI_BAR1 (PKUNITY_PCIBRI_BASE + 0x0014)
#define PCIBRI_BAR2 (PKUNITY_PCIBRI_BASE + 0x0018)
#define PCIBRI_BAR3 (PKUNITY_PCIBRI_BASE + 0x001C)
#define PCIBRI_BAR4 (PKUNITY_PCIBRI_BASE + 0x0020)
#define PCIBRI_BAR5 (PKUNITY_PCIBRI_BASE + 0x0024)
#define PCIBRI_PCICTL0 __REG(PKUNITY_PCIBRI_BASE + 0x0100)
#define PCIBRI_PCIBAR0 __REG(PKUNITY_PCIBRI_BASE + 0x0104)
#define PCIBRI_PCIAMR0 __REG(PKUNITY_PCIBRI_BASE + 0x0108)
#define PCIBRI_PCITAR0 __REG(PKUNITY_PCIBRI_BASE + 0x010C)
#define PCIBRI_PCICTL1 __REG(PKUNITY_PCIBRI_BASE + 0x0110)
#define PCIBRI_PCIBAR1 __REG(PKUNITY_PCIBRI_BASE + 0x0114)
#define PCIBRI_PCIAMR1 __REG(PKUNITY_PCIBRI_BASE + 0x0118)
#define PCIBRI_PCITAR1 __REG(PKUNITY_PCIBRI_BASE + 0x011C)
#define PCIBRI_PCICTL2 __REG(PKUNITY_PCIBRI_BASE + 0x0120)
#define PCIBRI_PCIBAR2 __REG(PKUNITY_PCIBRI_BASE + 0x0124)
#define PCIBRI_PCIAMR2 __REG(PKUNITY_PCIBRI_BASE + 0x0128)
#define PCIBRI_PCITAR2 __REG(PKUNITY_PCIBRI_BASE + 0x012C)
#define PCIBRI_PCICTL3 __REG(PKUNITY_PCIBRI_BASE + 0x0130)
#define PCIBRI_PCIBAR3 __REG(PKUNITY_PCIBRI_BASE + 0x0134)
#define PCIBRI_PCIAMR3 __REG(PKUNITY_PCIBRI_BASE + 0x0138)
#define PCIBRI_PCITAR3 __REG(PKUNITY_PCIBRI_BASE + 0x013C)
#define PCIBRI_PCICTL4 __REG(PKUNITY_PCIBRI_BASE + 0x0140)
#define PCIBRI_PCIBAR4 __REG(PKUNITY_PCIBRI_BASE + 0x0144)
#define PCIBRI_PCIAMR4 __REG(PKUNITY_PCIBRI_BASE + 0x0148)
#define PCIBRI_PCITAR4 __REG(PKUNITY_PCIBRI_BASE + 0x014C)
#define PCIBRI_PCICTL5 __REG(PKUNITY_PCIBRI_BASE + 0x0150)
#define PCIBRI_PCIBAR5 __REG(PKUNITY_PCIBRI_BASE + 0x0154)
#define PCIBRI_PCIAMR5 __REG(PKUNITY_PCIBRI_BASE + 0x0158)
#define PCIBRI_PCITAR5 __REG(PKUNITY_PCIBRI_BASE + 0x015C)
#define PCIBRI_PCICTL0 (PKUNITY_PCIBRI_BASE + 0x0100)
#define PCIBRI_PCIBAR0 (PKUNITY_PCIBRI_BASE + 0x0104)
#define PCIBRI_PCIAMR0 (PKUNITY_PCIBRI_BASE + 0x0108)
#define PCIBRI_PCITAR0 (PKUNITY_PCIBRI_BASE + 0x010C)
#define PCIBRI_PCICTL1 (PKUNITY_PCIBRI_BASE + 0x0110)
#define PCIBRI_PCIBAR1 (PKUNITY_PCIBRI_BASE + 0x0114)
#define PCIBRI_PCIAMR1 (PKUNITY_PCIBRI_BASE + 0x0118)
#define PCIBRI_PCITAR1 (PKUNITY_PCIBRI_BASE + 0x011C)
#define PCIBRI_PCICTL2 (PKUNITY_PCIBRI_BASE + 0x0120)
#define PCIBRI_PCIBAR2 (PKUNITY_PCIBRI_BASE + 0x0124)
#define PCIBRI_PCIAMR2 (PKUNITY_PCIBRI_BASE + 0x0128)
#define PCIBRI_PCITAR2 (PKUNITY_PCIBRI_BASE + 0x012C)
#define PCIBRI_PCICTL3 (PKUNITY_PCIBRI_BASE + 0x0130)
#define PCIBRI_PCIBAR3 (PKUNITY_PCIBRI_BASE + 0x0134)
#define PCIBRI_PCIAMR3 (PKUNITY_PCIBRI_BASE + 0x0138)
#define PCIBRI_PCITAR3 (PKUNITY_PCIBRI_BASE + 0x013C)
#define PCIBRI_PCICTL4 (PKUNITY_PCIBRI_BASE + 0x0140)
#define PCIBRI_PCIBAR4 (PKUNITY_PCIBRI_BASE + 0x0144)
#define PCIBRI_PCIAMR4 (PKUNITY_PCIBRI_BASE + 0x0148)
#define PCIBRI_PCITAR4 (PKUNITY_PCIBRI_BASE + 0x014C)
#define PCIBRI_PCICTL5 (PKUNITY_PCIBRI_BASE + 0x0150)
#define PCIBRI_PCIBAR5 (PKUNITY_PCIBRI_BASE + 0x0154)
#define PCIBRI_PCIAMR5 (PKUNITY_PCIBRI_BASE + 0x0158)
#define PCIBRI_PCITAR5 (PKUNITY_PCIBRI_BASE + 0x015C)
#define PCIBRI_AHBCTL0 __REG(PKUNITY_PCIBRI_BASE + 0x0180)
#define PCIBRI_AHBBAR0 __REG(PKUNITY_PCIBRI_BASE + 0x0184)
#define PCIBRI_AHBAMR0 __REG(PKUNITY_PCIBRI_BASE + 0x0188)
#define PCIBRI_AHBTAR0 __REG(PKUNITY_PCIBRI_BASE + 0x018C)
#define PCIBRI_AHBCTL1 __REG(PKUNITY_PCIBRI_BASE + 0x0190)
#define PCIBRI_AHBBAR1 __REG(PKUNITY_PCIBRI_BASE + 0x0194)
#define PCIBRI_AHBAMR1 __REG(PKUNITY_PCIBRI_BASE + 0x0198)
#define PCIBRI_AHBTAR1 __REG(PKUNITY_PCIBRI_BASE + 0x019C)
#define PCIBRI_AHBCTL2 __REG(PKUNITY_PCIBRI_BASE + 0x01A0)
#define PCIBRI_AHBBAR2 __REG(PKUNITY_PCIBRI_BASE + 0x01A4)
#define PCIBRI_AHBAMR2 __REG(PKUNITY_PCIBRI_BASE + 0x01A8)
#define PCIBRI_AHBTAR2 __REG(PKUNITY_PCIBRI_BASE + 0x01AC)
#define PCIBRI_AHBCTL3 __REG(PKUNITY_PCIBRI_BASE + 0x01B0)
#define PCIBRI_AHBBAR3 __REG(PKUNITY_PCIBRI_BASE + 0x01B4)
#define PCIBRI_AHBAMR3 __REG(PKUNITY_PCIBRI_BASE + 0x01B8)
#define PCIBRI_AHBTAR3 __REG(PKUNITY_PCIBRI_BASE + 0x01BC)
#define PCIBRI_AHBCTL4 __REG(PKUNITY_PCIBRI_BASE + 0x01C0)
#define PCIBRI_AHBBAR4 __REG(PKUNITY_PCIBRI_BASE + 0x01C4)
#define PCIBRI_AHBAMR4 __REG(PKUNITY_PCIBRI_BASE + 0x01C8)
#define PCIBRI_AHBTAR4 __REG(PKUNITY_PCIBRI_BASE + 0x01CC)
#define PCIBRI_AHBCTL5 __REG(PKUNITY_PCIBRI_BASE + 0x01D0)
#define PCIBRI_AHBBAR5 __REG(PKUNITY_PCIBRI_BASE + 0x01D4)
#define PCIBRI_AHBAMR5 __REG(PKUNITY_PCIBRI_BASE + 0x01D8)
#define PCIBRI_AHBTAR5 __REG(PKUNITY_PCIBRI_BASE + 0x01DC)
#define PCIBRI_AHBCTL0 (PKUNITY_PCIBRI_BASE + 0x0180)
#define PCIBRI_AHBBAR0 (PKUNITY_PCIBRI_BASE + 0x0184)
#define PCIBRI_AHBAMR0 (PKUNITY_PCIBRI_BASE + 0x0188)
#define PCIBRI_AHBTAR0 (PKUNITY_PCIBRI_BASE + 0x018C)
#define PCIBRI_AHBCTL1 (PKUNITY_PCIBRI_BASE + 0x0190)
#define PCIBRI_AHBBAR1 (PKUNITY_PCIBRI_BASE + 0x0194)
#define PCIBRI_AHBAMR1 (PKUNITY_PCIBRI_BASE + 0x0198)
#define PCIBRI_AHBTAR1 (PKUNITY_PCIBRI_BASE + 0x019C)
#define PCIBRI_AHBCTL2 (PKUNITY_PCIBRI_BASE + 0x01A0)
#define PCIBRI_AHBBAR2 (PKUNITY_PCIBRI_BASE + 0x01A4)
#define PCIBRI_AHBAMR2 (PKUNITY_PCIBRI_BASE + 0x01A8)
#define PCIBRI_AHBTAR2 (PKUNITY_PCIBRI_BASE + 0x01AC)
#define PCIBRI_AHBCTL3 (PKUNITY_PCIBRI_BASE + 0x01B0)
#define PCIBRI_AHBBAR3 (PKUNITY_PCIBRI_BASE + 0x01B4)
#define PCIBRI_AHBAMR3 (PKUNITY_PCIBRI_BASE + 0x01B8)
#define PCIBRI_AHBTAR3 (PKUNITY_PCIBRI_BASE + 0x01BC)
#define PCIBRI_AHBCTL4 (PKUNITY_PCIBRI_BASE + 0x01C0)
#define PCIBRI_AHBBAR4 (PKUNITY_PCIBRI_BASE + 0x01C4)
#define PCIBRI_AHBAMR4 (PKUNITY_PCIBRI_BASE + 0x01C8)
#define PCIBRI_AHBTAR4 (PKUNITY_PCIBRI_BASE + 0x01CC)
#define PCIBRI_AHBCTL5 (PKUNITY_PCIBRI_BASE + 0x01D0)
#define PCIBRI_AHBBAR5 (PKUNITY_PCIBRI_BASE + 0x01D4)
#define PCIBRI_AHBAMR5 (PKUNITY_PCIBRI_BASE + 0x01D8)
#define PCIBRI_AHBTAR5 (PKUNITY_PCIBRI_BASE + 0x01DC)
#define PCIBRI_CTLx_AT FIELD(1, 1, 2)
#define PCIBRI_CTLx_PREF FIELD(1, 1, 1)
......
arch/unicore32/include/mach/regs-pm.h
浏览文件 @ 1cf46c42
......@@ -4,75 +4,75 @@
/*
* PM Control Reg PM_PMCR
*/
#define PM_PMCR __REG(PKUNITY_PM_BASE + 0x0000)
#define PM_PMCR (PKUNITY_PM_BASE + 0x0000)
/*
* PM General Conf. Reg PM_PGCR
*/
#define PM_PGCR __REG(PKUNITY_PM_BASE + 0x0004)
#define PM_PGCR (PKUNITY_PM_BASE + 0x0004)
/*
* PM PLL Conf. Reg PM_PPCR
*/
#define PM_PPCR __REG(PKUNITY_PM_BASE + 0x0008)
#define PM_PPCR (PKUNITY_PM_BASE + 0x0008)
/*
* PM Wakeup Enable Reg PM_PWER
*/
#define PM_PWER __REG(PKUNITY_PM_BASE + 0x000C)
#define PM_PWER (PKUNITY_PM_BASE + 0x000C)
/*
* PM GPIO Sleep Status Reg PM_PGSR
*/
#define PM_PGSR __REG(PKUNITY_PM_BASE + 0x0010)
#define PM_PGSR (PKUNITY_PM_BASE + 0x0010)
/*
* PM Clock Gate Reg PM_PCGR
*/
#define PM_PCGR __REG(PKUNITY_PM_BASE + 0x0014)
#define PM_PCGR (PKUNITY_PM_BASE + 0x0014)
/*
* PM SYS PLL Conf. Reg PM_PLLSYSCFG
*/
#define PM_PLLSYSCFG __REG(PKUNITY_PM_BASE + 0x0018)
#define PM_PLLSYSCFG (PKUNITY_PM_BASE + 0x0018)
/*
* PM DDR PLL Conf. Reg PM_PLLDDRCFG
*/
#define PM_PLLDDRCFG __REG(PKUNITY_PM_BASE + 0x001C)
#define PM_PLLDDRCFG (PKUNITY_PM_BASE + 0x001C)
/*
* PM VGA PLL Conf. Reg PM_PLLVGACFG
*/
#define PM_PLLVGACFG __REG(PKUNITY_PM_BASE + 0x0020)
#define PM_PLLVGACFG (PKUNITY_PM_BASE + 0x0020)
/*
* PM Div Conf. Reg PM_DIVCFG
*/
#define PM_DIVCFG __REG(PKUNITY_PM_BASE + 0x0024)
#define PM_DIVCFG (PKUNITY_PM_BASE + 0x0024)
/*
* PM SYS PLL Status Reg PM_PLLSYSSTATUS
*/
#define PM_PLLSYSSTATUS __REG(PKUNITY_PM_BASE + 0x0028)
#define PM_PLLSYSSTATUS (PKUNITY_PM_BASE + 0x0028)
/*
* PM DDR PLL Status Reg PM_PLLDDRSTATUS
*/
#define PM_PLLDDRSTATUS __REG(PKUNITY_PM_BASE + 0x002C)
#define PM_PLLDDRSTATUS (PKUNITY_PM_BASE + 0x002C)
/*
* PM VGA PLL Status Reg PM_PLLVGASTATUS
*/
#define PM_PLLVGASTATUS __REG(PKUNITY_PM_BASE + 0x0030)
#define PM_PLLVGASTATUS (PKUNITY_PM_BASE + 0x0030)
/*
* PM Div Status Reg PM_DIVSTATUS
*/
#define PM_DIVSTATUS __REG(PKUNITY_PM_BASE + 0x0034)
#define PM_DIVSTATUS (PKUNITY_PM_BASE + 0x0034)
/*
* PM Software Reset Reg PM_SWRESET
*/
#define PM_SWRESET __REG(PKUNITY_PM_BASE + 0x0038)
#define PM_SWRESET (PKUNITY_PM_BASE + 0x0038)
/*
* PM DDR2 PAD Start Reg PM_DDR2START
*/
#define PM_DDR2START __REG(PKUNITY_PM_BASE + 0x003C)
#define PM_DDR2START (PKUNITY_PM_BASE + 0x003C)
/*
* PM DDR2 PAD Status Reg PM_DDR2CAL0
*/
#define PM_DDR2CAL0 __REG(PKUNITY_PM_BASE + 0x0040)
#define PM_DDR2CAL0 (PKUNITY_PM_BASE + 0x0040)
/*
* PM PLL DFC Done Reg PM_PLLDFCDONE
*/
#define PM_PLLDFCDONE __REG(PKUNITY_PM_BASE + 0x0044)
#define PM_PLLDFCDONE (PKUNITY_PM_BASE + 0x0044)
#define PM_PMCR_SFB FIELD(1, 1, 0)
#define PM_PMCR_IFB FIELD(1, 1, 1)
......
arch/unicore32/include/mach/regs-ps2.h
浏览文件 @ 1cf46c42
......@@ -4,17 +4,17 @@
/*
* the same as I8042_DATA_REG PS2_DATA
*/
#define PS2_DATA __REG(PKUNITY_PS2_BASE + 0x0060)
#define PS2_DATA (PKUNITY_PS2_BASE + 0x0060)
/*
* the same as I8042_COMMAND_REG PS2_COMMAND
*/
#define PS2_COMMAND __REG(PKUNITY_PS2_BASE + 0x0064)
#define PS2_COMMAND (PKUNITY_PS2_BASE + 0x0064)
/*
* the same as I8042_STATUS_REG PS2_STATUS
*/
#define PS2_STATUS __REG(PKUNITY_PS2_BASE + 0x0064)
#define PS2_STATUS (PKUNITY_PS2_BASE + 0x0064)
/*
* counter reg PS2_CNT
*/
#define PS2_CNT __REG(PKUNITY_PS2_BASE + 0x0068)
#define PS2_CNT (PKUNITY_PS2_BASE + 0x0068)
arch/unicore32/include/mach/regs-resetc.h
浏览文件 @ 1cf46c42
......@@ -4,11 +4,11 @@
/*
* Software Reset Register
*/
#define RESETC_SWRR __REG(PKUNITY_RESETC_BASE + 0x0000)
#define RESETC_SWRR (PKUNITY_RESETC_BASE + 0x0000)
/*
* Reset Status Register
*/
#define RESETC_RSSR __REG(PKUNITY_RESETC_BASE + 0x0004)
#define RESETC_RSSR (PKUNITY_RESETC_BASE + 0x0004)
/*
* Software Reset Bit
......
arch/unicore32/include/mach/regs-rtc.h
浏览文件 @ 1cf46c42
......@@ -4,19 +4,19 @@
/*
* RTC Alarm Reg RTC_RTAR
*/
#define RTC_RTAR __REG(PKUNITY_RTC_BASE + 0x0000)
#define RTC_RTAR (PKUNITY_RTC_BASE + 0x0000)
/*
* RTC Count Reg RTC_RCNR
*/
#define RTC_RCNR __REG(PKUNITY_RTC_BASE + 0x0004)
#define RTC_RCNR (PKUNITY_RTC_BASE + 0x0004)
/*
* RTC Trim Reg RTC_RTTR
*/
#define RTC_RTTR __REG(PKUNITY_RTC_BASE + 0x0008)
#define RTC_RTTR (PKUNITY_RTC_BASE + 0x0008)
/*
* RTC Status Reg RTC_RTSR
*/
#define RTC_RTSR __REG(PKUNITY_RTC_BASE + 0x0010)
#define RTC_RTSR (PKUNITY_RTC_BASE + 0x0010)
/*
* ALarm detected RTC_RTSR_AL
......
arch/unicore32/include/mach/regs-sdc.h
浏览文件 @ 1cf46c42
......@@ -4,67 +4,67 @@
/*
* Clock Control Reg SDC_CCR
*/
#define SDC_CCR __REG(PKUNITY_SDC_BASE + 0x0000)
#define SDC_CCR (PKUNITY_SDC_BASE + 0x0000)
/*
* Software Reset Reg SDC_SRR
*/
#define SDC_SRR __REG(PKUNITY_SDC_BASE + 0x0004)
#define SDC_SRR (PKUNITY_SDC_BASE + 0x0004)
/*
* Argument Reg SDC_ARGUMENT
*/
#define SDC_ARGUMENT __REG(PKUNITY_SDC_BASE + 0x0008)
#define SDC_ARGUMENT (PKUNITY_SDC_BASE + 0x0008)
/*
* Command Reg SDC_COMMAND
*/
#define SDC_COMMAND __REG(PKUNITY_SDC_BASE + 0x000C)
#define SDC_COMMAND (PKUNITY_SDC_BASE + 0x000C)
/*
* Block Size Reg SDC_BLOCKSIZE
*/
#define SDC_BLOCKSIZE __REG(PKUNITY_SDC_BASE + 0x0010)
#define SDC_BLOCKSIZE (PKUNITY_SDC_BASE + 0x0010)
/*
* Block Cound Reg SDC_BLOCKCOUNT
*/
#define SDC_BLOCKCOUNT __REG(PKUNITY_SDC_BASE + 0x0014)
#define SDC_BLOCKCOUNT (PKUNITY_SDC_BASE + 0x0014)
/*
* Transfer Mode Reg SDC_TMR
*/
#define SDC_TMR __REG(PKUNITY_SDC_BASE + 0x0018)
#define SDC_TMR (PKUNITY_SDC_BASE + 0x0018)
/*
* Response Reg. 0 SDC_RES0
*/
#define SDC_RES0 __REG(PKUNITY_SDC_BASE + 0x001C)
#define SDC_RES0 (PKUNITY_SDC_BASE + 0x001C)
/*
* Response Reg. 1 SDC_RES1
*/
#define SDC_RES1 __REG(PKUNITY_SDC_BASE + 0x0020)
#define SDC_RES1 (PKUNITY_SDC_BASE + 0x0020)
/*
* Response Reg. 2 SDC_RES2
*/
#define SDC_RES2 __REG(PKUNITY_SDC_BASE + 0x0024)
#define SDC_RES2 (PKUNITY_SDC_BASE + 0x0024)
/*
* Response Reg. 3 SDC_RES3
*/
#define SDC_RES3 __REG(PKUNITY_SDC_BASE + 0x0028)
#define SDC_RES3 (PKUNITY_SDC_BASE + 0x0028)
/*
* Read Timeout Control Reg SDC_RTCR
*/
#define SDC_RTCR __REG(PKUNITY_SDC_BASE + 0x002C)
#define SDC_RTCR (PKUNITY_SDC_BASE + 0x002C)
/*
* Interrupt Status Reg SDC_ISR
*/
#define SDC_ISR __REG(PKUNITY_SDC_BASE + 0x0030)
#define SDC_ISR (PKUNITY_SDC_BASE + 0x0030)
/*
* Interrupt Status Mask Reg SDC_ISMR
*/
#define SDC_ISMR __REG(PKUNITY_SDC_BASE + 0x0034)
#define SDC_ISMR (PKUNITY_SDC_BASE + 0x0034)
/*
* RX FIFO SDC_RXFIFO
*/
#define SDC_RXFIFO __REG(PKUNITY_SDC_BASE + 0x0038)
#define SDC_RXFIFO (PKUNITY_SDC_BASE + 0x0038)
/*
* TX FIFO SDC_TXFIFO
*/
#define SDC_TXFIFO __REG(PKUNITY_SDC_BASE + 0x003C)
#define SDC_TXFIFO (PKUNITY_SDC_BASE + 0x003C)
/*
* SD Clock Enable SDC_CCR_CLKEN
......
arch/unicore32/include/mach/regs-spi.h
浏览文件 @ 1cf46c42
......@@ -4,27 +4,27 @@
/*
* Control reg. 0 SPI_CR0
*/
#define SPI_CR0 __REG(PKUNITY_SPI_BASE + 0x0000)
#define SPI_CR0 (PKUNITY_SPI_BASE + 0x0000)
/*
* Control reg. 1 SPI_CR1
*/
#define SPI_CR1 __REG(PKUNITY_SPI_BASE + 0x0004)
#define SPI_CR1 (PKUNITY_SPI_BASE + 0x0004)
/*
* Enable reg SPI_SSIENR
*/
#define SPI_SSIENR __REG(PKUNITY_SPI_BASE + 0x0008)
#define SPI_SSIENR (PKUNITY_SPI_BASE + 0x0008)
/*
* Status reg SPI_SR
*/
#define SPI_SR __REG(PKUNITY_SPI_BASE + 0x0028)
#define SPI_SR (PKUNITY_SPI_BASE + 0x0028)
/*
* Interrupt Mask reg SPI_IMR
*/
#define SPI_IMR __REG(PKUNITY_SPI_BASE + 0x002C)
#define SPI_IMR (PKUNITY_SPI_BASE + 0x002C)
/*
* Interrupt Status reg SPI_ISR
*/
#define SPI_ISR __REG(PKUNITY_SPI_BASE + 0x0030)
#define SPI_ISR (PKUNITY_SPI_BASE + 0x0030)
/*
* Enable SPI Controller SPI_SSIENR_EN
......
arch/unicore32/include/mach/regs-umal.h
浏览文件 @ 1cf46c42
......@@ -10,86 +10,86 @@
/*
* TX/RX reset and control UMAL_CFG1
*/
#define UMAL_CFG1 __REG(PKUNITY_UMAL_BASE + 0x0000)
#define UMAL_CFG1 (PKUNITY_UMAL_BASE + 0x0000)
/*
* MAC interface mode control UMAL_CFG2
*/
#define UMAL_CFG2 __REG(PKUNITY_UMAL_BASE + 0x0004)
#define UMAL_CFG2 (PKUNITY_UMAL_BASE + 0x0004)
/*
* Inter Packet/Frame Gap UMAL_IPGIFG
*/
#define UMAL_IPGIFG __REG(PKUNITY_UMAL_BASE + 0x0008)
#define UMAL_IPGIFG (PKUNITY_UMAL_BASE + 0x0008)
/*
* Collision retry or backoff UMAL_HALFDUPLEX
*/
#define UMAL_HALFDUPLEX __REG(PKUNITY_UMAL_BASE + 0x000c)
#define UMAL_HALFDUPLEX (PKUNITY_UMAL_BASE + 0x000c)
/*
* Maximum Frame Length UMAL_MAXFRAME
*/
#define UMAL_MAXFRAME __REG(PKUNITY_UMAL_BASE + 0x0010)
#define UMAL_MAXFRAME (PKUNITY_UMAL_BASE + 0x0010)
/*
* Test Regsiter UMAL_TESTREG
*/
#define UMAL_TESTREG __REG(PKUNITY_UMAL_BASE + 0x001c)
#define UMAL_TESTREG (PKUNITY_UMAL_BASE + 0x001c)
/*
* MII Management Configure UMAL_MIICFG
*/
#define UMAL_MIICFG __REG(PKUNITY_UMAL_BASE + 0x0020)
#define UMAL_MIICFG (PKUNITY_UMAL_BASE + 0x0020)
/*
* MII Management Command UMAL_MIICMD
*/
#define UMAL_MIICMD __REG(PKUNITY_UMAL_BASE + 0x0024)
#define UMAL_MIICMD (PKUNITY_UMAL_BASE + 0x0024)
/*
* MII Management Address UMAL_MIIADDR
*/
#define UMAL_MIIADDR __REG(PKUNITY_UMAL_BASE + 0x0028)
#define UMAL_MIIADDR (PKUNITY_UMAL_BASE + 0x0028)
/*
* MII Management Control UMAL_MIICTRL
*/
#define UMAL_MIICTRL __REG(PKUNITY_UMAL_BASE + 0x002c)
#define UMAL_MIICTRL (PKUNITY_UMAL_BASE + 0x002c)
/*
* MII Management Status UMAL_MIISTATUS
*/
#define UMAL_MIISTATUS __REG(PKUNITY_UMAL_BASE + 0x0030)
#define UMAL_MIISTATUS (PKUNITY_UMAL_BASE + 0x0030)
/*
* MII Managment Indicator UMAL_MIIIDCT
*/
#define UMAL_MIIIDCT __REG(PKUNITY_UMAL_BASE + 0x0034)
#define UMAL_MIIIDCT (PKUNITY_UMAL_BASE + 0x0034)
/*
* Interface Control UMAL_IFCTRL
*/
#define UMAL_IFCTRL __REG(PKUNITY_UMAL_BASE + 0x0038)
#define UMAL_IFCTRL (PKUNITY_UMAL_BASE + 0x0038)
/*
* Interface Status UMAL_IFSTATUS
*/
#define UMAL_IFSTATUS __REG(PKUNITY_UMAL_BASE + 0x003c)
#define UMAL_IFSTATUS (PKUNITY_UMAL_BASE + 0x003c)
/*
* MAC address (high 4 bytes) UMAL_STADDR1
*/
#define UMAL_STADDR1 __REG(PKUNITY_UMAL_BASE + 0x0040)
#define UMAL_STADDR1 (PKUNITY_UMAL_BASE + 0x0040)
/*
* MAC address (low 2 bytes) UMAL_STADDR2
*/
#define UMAL_STADDR2 __REG(PKUNITY_UMAL_BASE + 0x0044)
#define UMAL_STADDR2 (PKUNITY_UMAL_BASE + 0x0044)
/* FIFO MODULE OF UMAL */
/* UMAL's FIFO module provides data queuing for increased system level
* throughput
*/
#define UMAL_FIFOCFG0 __REG(PKUNITY_UMAL_BASE + 0x0048)
#define UMAL_FIFOCFG1 __REG(PKUNITY_UMAL_BASE + 0x004c)
#define UMAL_FIFOCFG2 __REG(PKUNITY_UMAL_BASE + 0x0050)
#define UMAL_FIFOCFG3 __REG(PKUNITY_UMAL_BASE + 0x0054)
#define UMAL_FIFOCFG4 __REG(PKUNITY_UMAL_BASE + 0x0058)
#define UMAL_FIFOCFG5 __REG(PKUNITY_UMAL_BASE + 0x005c)
#define UMAL_FIFORAM0 __REG(PKUNITY_UMAL_BASE + 0x0060)
#define UMAL_FIFORAM1 __REG(PKUNITY_UMAL_BASE + 0x0064)
#define UMAL_FIFORAM2 __REG(PKUNITY_UMAL_BASE + 0x0068)
#define UMAL_FIFORAM3 __REG(PKUNITY_UMAL_BASE + 0x006c)
#define UMAL_FIFORAM4 __REG(PKUNITY_UMAL_BASE + 0x0070)
#define UMAL_FIFORAM5 __REG(PKUNITY_UMAL_BASE + 0x0074)
#define UMAL_FIFORAM6 __REG(PKUNITY_UMAL_BASE + 0x0078)
#define UMAL_FIFORAM7 __REG(PKUNITY_UMAL_BASE + 0x007c)
#define UMAL_FIFOCFG0 (PKUNITY_UMAL_BASE + 0x0048)
#define UMAL_FIFOCFG1 (PKUNITY_UMAL_BASE + 0x004c)
#define UMAL_FIFOCFG2 (PKUNITY_UMAL_BASE + 0x0050)
#define UMAL_FIFOCFG3 (PKUNITY_UMAL_BASE + 0x0054)
#define UMAL_FIFOCFG4 (PKUNITY_UMAL_BASE + 0x0058)
#define UMAL_FIFOCFG5 (PKUNITY_UMAL_BASE + 0x005c)
#define UMAL_FIFORAM0 (PKUNITY_UMAL_BASE + 0x0060)
#define UMAL_FIFORAM1 (PKUNITY_UMAL_BASE + 0x0064)
#define UMAL_FIFORAM2 (PKUNITY_UMAL_BASE + 0x0068)
#define UMAL_FIFORAM3 (PKUNITY_UMAL_BASE + 0x006c)
#define UMAL_FIFORAM4 (PKUNITY_UMAL_BASE + 0x0070)
#define UMAL_FIFORAM5 (PKUNITY_UMAL_BASE + 0x0074)
#define UMAL_FIFORAM6 (PKUNITY_UMAL_BASE + 0x0078)
#define UMAL_FIFORAM7 (PKUNITY_UMAL_BASE + 0x007c)
/* MAHBE MODUEL OF UMAL */
/* UMAL's MAHBE module interfaces to the host system through 32-bit AHB Master
......@@ -99,35 +99,35 @@
/*
* Transmit Control UMAL_DMATxCtrl
*/
#define UMAL_DMATxCtrl __REG(PKUNITY_UMAL_BASE + 0x0180)
#define UMAL_DMATxCtrl (PKUNITY_UMAL_BASE + 0x0180)
/*
* Pointer to TX Descripter UMAL_DMATxDescriptor
*/
#define UMAL_DMATxDescriptor __REG(PKUNITY_UMAL_BASE + 0x0184)
#define UMAL_DMATxDescriptor (PKUNITY_UMAL_BASE + 0x0184)
/*
* Status of Tx Packet Transfers UMAL_DMATxStatus
*/
#define UMAL_DMATxStatus __REG(PKUNITY_UMAL_BASE + 0x0188)
#define UMAL_DMATxStatus (PKUNITY_UMAL_BASE + 0x0188)
/*
* Receive Control UMAL_DMARxCtrl
*/
#define UMAL_DMARxCtrl __REG(PKUNITY_UMAL_BASE + 0x018c)
#define UMAL_DMARxCtrl (PKUNITY_UMAL_BASE + 0x018c)
/*
* Pointer to Rx Descriptor UMAL_DMARxDescriptor
*/
#define UMAL_DMARxDescriptor __REG(PKUNITY_UMAL_BASE + 0x0190)
#define UMAL_DMARxDescriptor (PKUNITY_UMAL_BASE + 0x0190)
/*
* Status of Rx Packet Transfers UMAL_DMARxStatus
*/
#define UMAL_DMARxStatus __REG(PKUNITY_UMAL_BASE + 0x0194)
#define UMAL_DMARxStatus (PKUNITY_UMAL_BASE + 0x0194)
/*
* Interrupt Mask UMAL_DMAIntrMask
*/
#define UMAL_DMAIntrMask __REG(PKUNITY_UMAL_BASE + 0x0198)
#define UMAL_DMAIntrMask (PKUNITY_UMAL_BASE + 0x0198)
/*
* Interrupts, read only UMAL_DMAInterrupt
*/
#define UMAL_DMAInterrupt __REG(PKUNITY_UMAL_BASE + 0x019c)
#define UMAL_DMAInterrupt (PKUNITY_UMAL_BASE + 0x019c)
/*
* Commands for UMAL_CFG1 register
......
arch/unicore32/include/mach/regs-unigfx.h
浏览文件 @ 1cf46c42
......@@ -11,67 +11,67 @@
/*
* control reg UDE_CFG
*/
#define UDE_CFG __REG(UDE_BASE + 0x0000)
#define UDE_CFG (UDE_BASE + 0x0000)
/*
* framebuffer start address reg UDE_FSA
*/
#define UDE_FSA __REG(UDE_BASE + 0x0004)
#define UDE_FSA (UDE_BASE + 0x0004)
/*
* line size reg UDE_LS
*/
#define UDE_LS __REG(UDE_BASE + 0x0008)
#define UDE_LS (UDE_BASE + 0x0008)
/*
* pitch size reg UDE_PS
*/
#define UDE_PS __REG(UDE_BASE + 0x000C)
#define UDE_PS (UDE_BASE + 0x000C)
/*
* horizontal active time reg UDE_HAT
*/
#define UDE_HAT __REG(UDE_BASE + 0x0010)
#define UDE_HAT (UDE_BASE + 0x0010)
/*
* horizontal blank time reg UDE_HBT
*/
#define UDE_HBT __REG(UDE_BASE + 0x0014)
#define UDE_HBT (UDE_BASE + 0x0014)
/*
* horizontal sync time reg UDE_HST
*/
#define UDE_HST __REG(UDE_BASE + 0x0018)
#define UDE_HST (UDE_BASE + 0x0018)
/*
* vertival active time reg UDE_VAT
*/
#define UDE_VAT __REG(UDE_BASE + 0x001C)
#define UDE_VAT (UDE_BASE + 0x001C)
/*
* vertival blank time reg UDE_VBT
*/
#define UDE_VBT __REG(UDE_BASE + 0x0020)
#define UDE_VBT (UDE_BASE + 0x0020)
/*
* vertival sync time reg UDE_VST
*/
#define UDE_VST __REG(UDE_BASE + 0x0024)
#define UDE_VST (UDE_BASE + 0x0024)
/*
* cursor position UDE_CXY
*/
#define UDE_CXY __REG(UDE_BASE + 0x0028)
#define UDE_CXY (UDE_BASE + 0x0028)
/*
* cursor front color UDE_CC0
*/
#define UDE_CC0 __REG(UDE_BASE + 0x002C)
#define UDE_CC0 (UDE_BASE + 0x002C)
/*
* cursor background color UDE_CC1
*/
#define UDE_CC1 __REG(UDE_BASE + 0x0030)
#define UDE_CC1 (UDE_BASE + 0x0030)
/*
* video position UDE_VXY
*/
#define UDE_VXY __REG(UDE_BASE + 0x0034)
#define UDE_VXY (UDE_BASE + 0x0034)
/*
* video start address reg UDE_VSA
*/
#define UDE_VSA __REG(UDE_BASE + 0x0040)
#define UDE_VSA (UDE_BASE + 0x0040)
/*
* video size reg UDE_VS
*/
#define UDE_VS __REG(UDE_BASE + 0x004C)
#define UDE_VS (UDE_BASE + 0x004C)
/*
* command reg for UNIGFX GE
......@@ -79,102 +79,102 @@
/*
* src xy reg UGE_SRCXY
*/
#define UGE_SRCXY __REG(UGE_BASE + 0x0000)
#define UGE_SRCXY (UGE_BASE + 0x0000)
/*
* dst xy reg UGE_DSTXY
*/
#define UGE_DSTXY __REG(UGE_BASE + 0x0004)
#define UGE_DSTXY (UGE_BASE + 0x0004)
/*
* pitch reg UGE_PITCH
*/
#define UGE_PITCH __REG(UGE_BASE + 0x0008)
#define UGE_PITCH (UGE_BASE + 0x0008)
/*
* src start reg UGE_SRCSTART
*/
#define UGE_SRCSTART __REG(UGE_BASE + 0x000C)
#define UGE_SRCSTART (UGE_BASE + 0x000C)
/*
* dst start reg UGE_DSTSTART
*/
#define UGE_DSTSTART __REG(UGE_BASE + 0x0010)
#define UGE_DSTSTART (UGE_BASE + 0x0010)
/*
* width height reg UGE_WIDHEIGHT
*/
#define UGE_WIDHEIGHT __REG(UGE_BASE + 0x0014)
#define UGE_WIDHEIGHT (UGE_BASE + 0x0014)
/*
* rop alpah reg UGE_ROPALPHA
*/
#define UGE_ROPALPHA __REG(UGE_BASE + 0x0018)
#define UGE_ROPALPHA (UGE_BASE + 0x0018)
/*
* front color UGE_FCOLOR
*/
#define UGE_FCOLOR __REG(UGE_BASE + 0x001C)
#define UGE_FCOLOR (UGE_BASE + 0x001C)
/*
* background color UGE_BCOLOR
*/
#define UGE_BCOLOR __REG(UGE_BASE + 0x0020)
#define UGE_BCOLOR (UGE_BASE + 0x0020)
/*
* src color key for high value UGE_SCH
*/
#define UGE_SCH __REG(UGE_BASE + 0x0024)
#define UGE_SCH (UGE_BASE + 0x0024)
/*
* dst color key for high value UGE_DCH
*/
#define UGE_DCH __REG(UGE_BASE + 0x0028)
#define UGE_DCH (UGE_BASE + 0x0028)
/*
* src color key for low value UGE_SCL
*/
#define UGE_SCL __REG(UGE_BASE + 0x002C)
#define UGE_SCL (UGE_BASE + 0x002C)
/*
* dst color key for low value UGE_DCL
*/
#define UGE_DCL __REG(UGE_BASE + 0x0030)
#define UGE_DCL (UGE_BASE + 0x0030)
/*
* clip 0 reg UGE_CLIP0
*/
#define UGE_CLIP0 __REG(UGE_BASE + 0x0034)
#define UGE_CLIP0 (UGE_BASE + 0x0034)
/*
* clip 1 reg UGE_CLIP1
*/
#define UGE_CLIP1 __REG(UGE_BASE + 0x0038)
#define UGE_CLIP1 (UGE_BASE + 0x0038)
/*
* command reg UGE_COMMAND
*/
#define UGE_COMMAND __REG(UGE_BASE + 0x003C)
#define UGE_COMMAND (UGE_BASE + 0x003C)
/*
* pattern 0 UGE_P0
*/
#define UGE_P0 __REG(UGE_BASE + 0x0040)
#define UGE_P1 __REG(UGE_BASE + 0x0044)
#define UGE_P2 __REG(UGE_BASE + 0x0048)
#define UGE_P3 __REG(UGE_BASE + 0x004C)
#define UGE_P4 __REG(UGE_BASE + 0x0050)
#define UGE_P5 __REG(UGE_BASE + 0x0054)
#define UGE_P6 __REG(UGE_BASE + 0x0058)
#define UGE_P7 __REG(UGE_BASE + 0x005C)
#define UGE_P8 __REG(UGE_BASE + 0x0060)
#define UGE_P9 __REG(UGE_BASE + 0x0064)
#define UGE_P10 __REG(UGE_BASE + 0x0068)
#define UGE_P11 __REG(UGE_BASE + 0x006C)
#define UGE_P12 __REG(UGE_BASE + 0x0070)
#define UGE_P13 __REG(UGE_BASE + 0x0074)
#define UGE_P14 __REG(UGE_BASE + 0x0078)
#define UGE_P15 __REG(UGE_BASE + 0x007C)
#define UGE_P16 __REG(UGE_BASE + 0x0080)
#define UGE_P17 __REG(UGE_BASE + 0x0084)
#define UGE_P18 __REG(UGE_BASE + 0x0088)
#define UGE_P19 __REG(UGE_BASE + 0x008C)
#define UGE_P20 __REG(UGE_BASE + 0x0090)
#define UGE_P21 __REG(UGE_BASE + 0x0094)
#define UGE_P22 __REG(UGE_BASE + 0x0098)
#define UGE_P23 __REG(UGE_BASE + 0x009C)
#define UGE_P24 __REG(UGE_BASE + 0x00A0)
#define UGE_P25 __REG(UGE_BASE + 0x00A4)
#define UGE_P26 __REG(UGE_BASE + 0x00A8)
#define UGE_P27 __REG(UGE_BASE + 0x00AC)
#define UGE_P28 __REG(UGE_BASE + 0x00B0)
#define UGE_P29 __REG(UGE_BASE + 0x00B4)
#define UGE_P30 __REG(UGE_BASE + 0x00B8)
#define UGE_P31 __REG(UGE_BASE + 0x00BC)
#define UGE_P0 (UGE_BASE + 0x0040)
#define UGE_P1 (UGE_BASE + 0x0044)
#define UGE_P2 (UGE_BASE + 0x0048)
#define UGE_P3 (UGE_BASE + 0x004C)
#define UGE_P4 (UGE_BASE + 0x0050)
#define UGE_P5 (UGE_BASE + 0x0054)
#define UGE_P6 (UGE_BASE + 0x0058)
#define UGE_P7 (UGE_BASE + 0x005C)
#define UGE_P8 (UGE_BASE + 0x0060)
#define UGE_P9 (UGE_BASE + 0x0064)
#define UGE_P10 (UGE_BASE + 0x0068)
#define UGE_P11 (UGE_BASE + 0x006C)
#define UGE_P12 (UGE_BASE + 0x0070)
#define UGE_P13 (UGE_BASE + 0x0074)
#define UGE_P14 (UGE_BASE + 0x0078)
#define UGE_P15 (UGE_BASE + 0x007C)
#define UGE_P16 (UGE_BASE + 0x0080)
#define UGE_P17 (UGE_BASE + 0x0084)
#define UGE_P18 (UGE_BASE + 0x0088)
#define UGE_P19 (UGE_BASE + 0x008C)
#define UGE_P20 (UGE_BASE + 0x0090)
#define UGE_P21 (UGE_BASE + 0x0094)
#define UGE_P22 (UGE_BASE + 0x0098)
#define UGE_P23 (UGE_BASE + 0x009C)
#define UGE_P24 (UGE_BASE + 0x00A0)
#define UGE_P25 (UGE_BASE + 0x00A4)
#define UGE_P26 (UGE_BASE + 0x00A8)
#define UGE_P27 (UGE_BASE + 0x00AC)
#define UGE_P28 (UGE_BASE + 0x00B0)
#define UGE_P29 (UGE_BASE + 0x00B4)
#define UGE_P30 (UGE_BASE + 0x00B8)
#define UGE_P31 (UGE_BASE + 0x00BC)
#define UDE_CFG_DST_MASK FMASK(2, 8)
#define UDE_CFG_DST8 FIELD(0x0, 2, 8)
......
arch/unicore32/kernel/entry.S
浏览文件 @ 1cf46c42
......@@ -91,7 +91,7 @@
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldw \base, =(io_p2v(PKUNITY_INTC_BASE))
ldw \base, =(PKUNITY_INTC_BASE)
ldw \irqstat, [\base+], #0xC @ INTC_ICIP
ldw \tmp, [\base+], #0x4 @ INTC_ICMR
and.a \irqstat, \irqstat, \tmp
......
arch/unicore32/kernel/irq.c
浏览文件 @ 1cf46c42
......@@ -226,8 +226,8 @@ static struct irq_chip puv3_normal_chip = {
static struct resource irq_resource = {
.name = "irqs",
.start = PKUNITY_INTC_BASE,
.end = PKUNITY_INTC_BASE + 0xFFFFF,
.start = io_v2p(PKUNITY_INTC_BASE),
.end = io_v2p(PKUNITY_INTC_BASE) + 0xFFFFF,
};
static struct puv3_irq_state {
......
arch/unicore32/kernel/pci.c
浏览文件 @ 1cf46c42
......@@ -75,27 +75,27 @@ void pci_puv3_preinit(void)
{
printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n");
/* config PCI bridge base */
writel(PKUNITY_PCIBRI_BASE, PCICFG_BRIBASE);
writel(io_v2p(PKUNITY_PCIBRI_BASE), PCICFG_BRIBASE);
writel(0, PCIBRI_AHBCTL0);
writel(PKUNITY_PCIBRI_BASE | PCIBRI_BARx_MEM, PCIBRI_AHBBAR0);
writel(io_v2p(PKUNITY_PCIBRI_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR0);
writel(0xFFFF0000, PCIBRI_AHBAMR0);
writel(0, PCIBRI_AHBTAR0);
writel(PCIBRI_CTLx_AT, PCIBRI_AHBCTL1);
writel(PKUNITY_PCILIO_BASE | PCIBRI_BARx_IO, PCIBRI_AHBBAR1);
writel(io_v2p(PKUNITY_PCILIO_BASE) | PCIBRI_BARx_IO, PCIBRI_AHBBAR1);
writel(0xFFFF0000, PCIBRI_AHBAMR1);
writel(0x00000000, PCIBRI_AHBTAR1);
writel(PCIBRI_CTLx_PREF, PCIBRI_AHBCTL2);
writel(PKUNITY_PCIMEM_BASE | PCIBRI_BARx_MEM, PCIBRI_AHBBAR2);
writel(io_v2p(PKUNITY_PCIMEM_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR2);
writel(0xF8000000, PCIBRI_AHBAMR2);
writel(0, PCIBRI_AHBTAR2);
writel(PKUNITY_PCIAHB_BASE | PCIBRI_BARx_MEM, PCIBRI_BAR1);
writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_BAR1);
writel(PCIBRI_CTLx_AT | PCIBRI_CTLx_PREF, PCIBRI_PCICTL0);
writel(PKUNITY_PCIAHB_BASE | PCIBRI_BARx_MEM, PCIBRI_PCIBAR0);
writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_PCIBAR0);
writel(0xF8000000, PCIBRI_PCIAMR0);
writel(PKUNITY_SDRAM_BASE, PCIBRI_PCITAR0);
......
arch/unicore32/kernel/puv3-core.c
浏览文件 @ 1cf46c42
......@@ -50,8 +50,8 @@ unsigned long long sched_clock(void)
static struct resource puv3_usb_resources[] = {
/* order is significant! */
{
.start = PKUNITY_USB_BASE,
.end = PKUNITY_USB_BASE + 0x3ff,
.start = io_v2p(PKUNITY_USB_BASE),
.end = io_v2p(PKUNITY_USB_BASE) + 0x3ff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_USB,
......@@ -82,8 +82,8 @@ static struct musb_hdrc_platform_data puv3_usb_plat = {
static struct resource puv3_mmc_resources[] = {
[0] = {
.start = PKUNITY_SDC_BASE,
.end = PKUNITY_SDC_BASE + 0xfff,
.start = io_v2p(PKUNITY_SDC_BASE),
.end = io_v2p(PKUNITY_SDC_BASE) + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -95,8 +95,8 @@ static struct resource puv3_mmc_resources[] = {
static struct resource puv3_unigfx_resources[] = {
[0] = {
.start = PKUNITY_UNIGFX_BASE,
.end = PKUNITY_UNIGFX_BASE + 0xfff,
.start = io_v2p(PKUNITY_UNIGFX_BASE),
.end = io_v2p(PKUNITY_UNIGFX_BASE) + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -108,8 +108,8 @@ static struct resource puv3_unigfx_resources[] = {
static struct resource puv3_rtc_resources[] = {
[0] = {
.start = PKUNITY_RTC_BASE,
.end = PKUNITY_RTC_BASE + 0xff,
.start = io_v2p(PKUNITY_RTC_BASE),
.end = io_v2p(PKUNITY_RTC_BASE) + 0xff,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -126,16 +126,16 @@ static struct resource puv3_rtc_resources[] = {
static struct resource puv3_pwm_resources[] = {
[0] = {
.start = PKUNITY_OST_BASE + 0x80,
.end = PKUNITY_OST_BASE + 0xff,
.start = io_v2p(PKUNITY_OST_BASE) + 0x80,
.end = io_v2p(PKUNITY_OST_BASE) + 0xff,
.flags = IORESOURCE_MEM,
},
};
static struct resource puv3_uart0_resources[] = {
[0] = {
.start = PKUNITY_UART0_BASE,
.end = PKUNITY_UART0_BASE + 0xff,
.start = io_v2p(PKUNITY_UART0_BASE),
.end = io_v2p(PKUNITY_UART0_BASE) + 0xff,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -147,8 +147,8 @@ static struct resource puv3_uart0_resources[] = {
static struct resource puv3_uart1_resources[] = {
[0] = {
.start = PKUNITY_UART1_BASE,
.end = PKUNITY_UART1_BASE + 0xff,
.start = io_v2p(PKUNITY_UART1_BASE),
.end = io_v2p(PKUNITY_UART1_BASE) + 0xff,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -160,8 +160,8 @@ static struct resource puv3_uart1_resources[] = {
static struct resource puv3_umal_resources[] = {
[0] = {
.start = PKUNITY_UMAL_BASE,
.end = PKUNITY_UMAL_BASE + 0x1fff,
.start = io_v2p(PKUNITY_UMAL_BASE),
.end = io_v2p(PKUNITY_UMAL_BASE) + 0x1fff,
.flags = IORESOURCE_MEM,
},
[1] = {
......
arch/unicore32/kernel/puv3-nb0916.c
浏览文件 @ 1cf46c42
......@@ -39,8 +39,8 @@ static struct resource physmap_flash_resource = {
static struct resource puv3_i2c_resources[] = {
[0] = {
.start = PKUNITY_I2C_BASE,
.end = PKUNITY_I2C_BASE + 0xff,
.start = io_v2p(PKUNITY_I2C_BASE),
.end = io_v2p(PKUNITY_I2C_BASE) + 0xff,
.flags = IORESOURCE_MEM,
},
[1] = {
......
arch/unicore32/kernel/sleep.S
浏览文件 @ 1cf46c42
......@@ -76,10 +76,10 @@ ENTRY(puv3_cpu_suspend)
@ DDR2 BaseAddr
ldw r0, =io_p2v(PKUNITY_DDR2CTRL_BASE)
ldw r0, =(PKUNITY_DDR2CTRL_BASE)
@ PM BaseAddr
ldw r1, =io_p2v(PKUNITY_PM_BASE)
ldw r1, =(PKUNITY_PM_BASE)
@ set PLL_SYS_CFG reg, 275
movl r6, #0x00002401
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或