Do not use KERN_DEBUG several times on the same line being printed.
Introduced by mine previous patch, sorry.
Reported-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Andrew said, we don't need duplicated panic.
because __alloc_bootmem already have that.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

By changing printout form we are able to shrink (and clean up) code a bit.

Former printout example:

	init IO_APIC IRQs
	 IO-APIC (apicid-pin) 1-1, 1-2, 1-3 not connected.
	 IO-APIC (apicid-pin) 2-1, 2-2, 2-3 not connected.

New printout example:

	init IO_APIC IRQs
	 1-1 1-2 1-3 (apicid-pin) not connected
	 2-1 2-2 2-3 (apicid-pin) not connected
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Initialize a per CPU HPET MSI timer when possible. We retain the HPET
timer 0 (IRQ 0) and timer 1 (IRQ 8) as is when legacy mode is being used. We
setup the remaining HPET timers as per CPU MSI based timers. This per CPU
timer will eliminate the need for timer broadcasting with IRQ 0 when there
is non-functional LAPIC timer across CPU deep C-states.

If there are more CPUs than number of available timers, CPUs that do not
find any timer to use will continue using LAPIC and IRQ 0 broadcast.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

small style cleanups.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Basic HPET MSI setup code. Routines to perform basic MSI read write
in HPET memory map and setting up irq_chip for HPET MSI.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Preparatory patch before the actual HPET MSI changes. Sets up hpet_set_mode
and hpet_next_event for the MSI related changes. Just the code
refactoring and should be zero functional change.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Change the IRQ affinity in the process context when the IRQ is disabled.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

need to change irq to int too
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Extraneous call to irq_to_desc().
Signed-off-by: NDean Nelson <dcn@sgi.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

An error return from create_irq_nr() is 0, but an error return from
create_irq() is -1.
Signed-off-by: NDean Nelson <dcn@sgi.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We use irq_cfg_lock lock in SPARSE_IRQ only context so
move it under #ifdef and compiler will be happy.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make the code width a bit shorter with ARRAY_SIZE macro.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Andrew found the typo could break some platforms.

also fix a checkpatch warning.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build failure on uniprocessor

When compiling for !CONFIG_SMP, per_cpu_alloc_dyn_array() would fail
to compile, since it uses per_cpu_offset, which is not defined for
uniprocessor builds.

Hence, do not compile per_cpu_alloc_dyn_array() for !CONFIG_SMP.
Attempting to call this function in a uniprocessor configuration would
be simply wrong in the first place.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

It is possible that,
instead of PCI endpoint/sub-hierarchy structures, only IO-APIC/HPET
devices may be reported under device scope structures. Fix the devices_cnt
error check, which cares about only PCI structures and removes the
dma-remapping unit structure (dmaru) when the devices_cnt is zero
and include_all flag is not set.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In dmar_dev_scope_init(), functions called under for_each_drhd_unit()/
for_each_rmrr_units() can delete the list entry under some error conditions.

So we should use list_for_each_entry_safe() for safe traversal.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

initialize the return value in dmar_parse_dev()
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Very early detection of the DMAR tables will setup fixmap mapping. For
parsing these tables later (while enabling dma and/or interrupt remapping),
early fixmap mapping shouldn't be used. Fix it by calling table detection
routines again, which will call generic apci_get_table() for setting up
the correct mapping.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

APIC_ARBPRI is a reserved register for XAPIC and beyond.
APIC_RRR is a reserved register except for 82489DX, APIC for Pentium processors.
APIC_EOI is a write only register.
APIC_DFR is reserved in x2apic mode.

Access to these registers in x2apic will result in #GP fault. Fix these
apic register accesses.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Stephen Rothwell reported such build failures on m68k/sparc/s390:

> ERROR: "nr_irqs" [drivers/net/hamradio/baycom_ser_fdx.ko] undefined!
> ERROR: "nr_irqs" [drivers/net/3c59x.ko] undefined!

export nr_irqs on these architectures too.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

According to entry_64.S we do pass pt_regs pointer
into interrupt handlers but don't use them. So we
safely may merge the declarations.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix non-sparseirq architectures.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use the 32-bit APIC calibration code - it's more mature.
Signed-of-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@mgail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

except x2apic, detec_init_APIC, and calibrating_APIC_clock
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

All callers are __init or __cpuinit so there is no need
to hold this code without CPU_HOTPLUG being set.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- remove useless read of APIC_LVR
- wrap with preempt_disable/enable
- check for integrated APIC just in place

v2: fix by Yinghai Lu.
	fix lapic_is_integrated using
	let 64-bit too have pic_mode
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>