- AMDKFD_IOC_CREATE_EVENT:
	Creates a new event of a specified type

- AMDKFD_IOC_DESTROY_EVENT:
	Destroys an existing event

- AMDKFD_IOC_SET_EVENT:
	Signal an existing event

- AMDKFD_IOC_RESET_EVENT:
	Reset an existing event

- AMDKFD_IOC_WAIT_EVENTS:
	Wait on event(s) until they are signaled

v2:

- Move the limit of the signal events to kfd_ioctl.h so it
  can be used by userspace

v3:
- Change all bool fields in struct kfd_memory_exception_failure
to uint32_t
Signed-off-by: NAndrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds the interrupt handling module, kfd_interrupt.c, and its
related members in different data structures to the amdkfd driver.

The amdkfd interrupt module maintains an internal interrupt ring
per amdkfd device. The internal interrupt ring contains interrupts
that needs further handling. The extra handling is deferred to
a later time through a workqueue.

There's no acknowledgment for the interrupts we use. The hardware
simply queues a new interrupt each time without waiting.

The fixed-size internal queue means that it's possible for us to lose
interrupts because we have no back-pressure to the hardware.

However, only interrupts that are "wanted" by amdkfd, are copied into
the amdkfd s/w interrupt ring, in order to minimize the chances
for overflow of the ring.
Signed-off-by: NAndrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds a new interface function to the kfd->kgd interface.
The function is kgd_init_interrupts() and its function is to
initialize a pipe's interrupts.

The function currently enables the timestamp interrupt and the
bad opcode interrupt.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Leaving AMD soon so need to update my email address to @gmail.com
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

This patch creates a new structure for asic specific operations, instead
of using the existing structure of operations.

This is done to make the code flow more logic, readable and maintainable.

The change is done only to the device queue manager module at this point.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

kmalloc() returns a void pointer - no need to cast it in
drivers/gpu/drm/amd/amdkfd/kfd_process.c::kfd_process_destroy_delayed()
Signed-off-by: NFiro Yang <firogm@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@amd.com>

- skl plane scaler support (Chandra Kondru)
- enable hsw cmd parser (Daniel and fix from Rebecca Palmer)
- skl dc5/6 support (low power display modes) from Suketu&Sunil
- dp compliance testing patches (Todd Previte)
- dp link training optimization (Mika Kahola)
- fixes to make skl resume work (Damien)
- rework modeset code to fully use atomic state objects (Ander&Maarten)
- pile of bxt w/a patchs from Nick Hoath
- (linear) partial gtt mmap support (Joonas Lahtinen)

* tag 'drm-intel-next-2015-05-08' of git://anongit.freedesktop.org/drm-intel: (103 commits)
  drm/i915: Update DRIVER_DATE to 20150508
  drm/i915: Only wait for required lanes in vlv_wait_port_ready()
  drm/i915: Fix possible security hole in command parsing
  drm/edid: Kerneldoc for newly added edid_corrupt
  drm/i915: Reject huge tiled objects
  Revert "drm/i915: Hack to tie both common lanes together on chv"
  drm/i915: Work around DISPLAY_PHY_CONTROL register corruption on CHV
  drm/i915: Implement chv display PHY lane stagger setup
  drm/i915/vlv: remove wait for previous GFX clk disable request
  drm/i915: Set crtc_state->active to false when CRTC is disabled (v2)
  drm/i915/skl: Re-indent part of skl_ddi_calculate_wrpll()
  drm/i915: Use partial view in mmap fault handler
  drm/i915: Add a partial GGTT view type
  drm/i915: Consider object pinned if any VMA is pinned
  drm/i915: Do not make assumptions on GGTT VMA sizes
  drm/i915/bxt: Mark WaCcsTlbPrefetchDisable as for Broxton also.
  drm/i915/bxt: Mark WaDisablePartialResolveInVc as for Broxton also.
  drm/i915/bxt: Mark Wa4x4STCOptimizationDisable as for Broxton also.
  drm/i915/bxt: Move WaForceEnableNonCoherent to Skylake only
  drm/i915/bxt: Enable WaEnableYV12BugFixInHalfSliceChicken7 for Broxton
  ...

some minor cleanups
* 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm/armada: armada_drv: Remove unused function
  drm/armada: armada_output: Remove some unused functions

tda998x: use helpers for infoframe.
* 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm/i2c: tda998x: use drm_hdmi_avi_infoframe_from_display_mode()

Looks like it was introduced in:

commit 650ad970
Author: Imre Deak <imre.deak@intel.com>
Date:   Fri Apr 18 16:35:02 2014 +0300

    drm/i915: vlv: factor out vlv_force_gfx_clock and check for pending force-of

but I'm not sure why.  It has caused problems for us in the past (see
85250ddf "drm/i915/chv: Remove Wait for a previous gfx force-off"
and 8d4eee9c "drm/i915: vlv: increase timeout when forcing on the
GFX clock") and doesn't seem to be required, so let's just drop it.

[airlied: I messed up a merge - readd this]
References: https://bugs.freedesktop.org/show_bug.cgi?id=89611Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: NDarren Hart <dvhart@linux.intel.com>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Cc: stable@vger.kernel.org # c9c52e24: drm/i915/chv: Remove Wait ...
Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently vlv_wait_port_ready() waits for all four lanes on the
appropriate channel. This no longer works on CHV when the unused
lanes may be power gated. So pass in a mask of lanes that the
caller is expecting to be ready.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by:  Deepak S<deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

i915_parse_cmds returns -EACCES on chained batches, which "tells the
caller to abort and dispatch the workload as a non-secure batch",
but the mechanism implementing that was broken when
flags |= I915_DISPATCH_SECURE was moved from i915_gem_execbuffer_parse
to i915_gem_do_execbuffer (17cabf57):
i915_gem_execbuffer_parse returns the original batch_obj in this case,
and i915_gem_do_execbuffer doesn't check for that.

Don't set the secure bit in this case to make sure such batches don't
run with elevated priviledges.
Signed-off-by: NRebecca Palmer <rebecca_palmer@zoho.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
[danvet: Stitch together commit message. Also remove a comment as
suggested by Mika. And style-align the comment while at it.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Also treat it as a proper boolean.

Cc: Todd Previte <tprevite@gmail.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

We do not yet support tiled objects bigger than the mappable
aperture size so reject them.
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
[danvet: Rework the check a bit to avoid warnings.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With recent hardware/firmware there don't appear to be any glitches
on the other PHY when we toggle the cmnreset for the other PHY. So
detangle the cmnlane power wells from one another and let them be
controlled independently.

This reverts commit 3dd7b974.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Sometimes (exactly when is a bit unclear) DISPLAY_PHY_CONTROL appears to
get corrupted. The values I've managed to read from it seem to have some
pattern but vary quite a lot. The corruption doesn't seem to just happen
when the register is accessed, but can also happen spontaneosly during
modeset. When this happens during a modeset things go south and the
display doesn't light up.

I've managed to hit the problemn when toggling HDMI on port D on and
off. When things get corrupted the display doesn't light up, but as soon
as I manually write the correct value to the register the display comes
up.

First I was suspicious that we ourselves accidentally overwrite it with
garbage, but didn't catch anything with the reg_rw tracepoint. Also I
sprinkled check all over the modeset path to see exactly when the
corruption happens, and eg. the read back value was fine just before
intel_dp_set_m(), and corrupted immediately after it. I also made my
check function repair the register value whenever it was wrong, and with
this approach the corruption repeated several times during the modeset
operation, always seeming to trigger in the same exact calls to the
check function, while other calls to the function never caught anything.

So far I've not seen this problem occurring when carefully avoiding all
read accesses to DISPLAY_PHY_CONTROL. Not sure if that's just pure luck
or an actual workaround, but we can hope it works. So let's avoid reading
the register and instead track the desired value of the register in dev_priv.

v2: Read out the power well state to determine initial register value
v3: Use DPIO_CHx names instead of raw numbers
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Set up the chv display PHY lane stagger registers according to
"Programming Guide for 1273 CHV eDP/DP/HDMI Display PHY" v1.04
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Looks like it was introduced in:

commit 650ad970
Author: Imre Deak <imre.deak@intel.com>
Date:   Fri Apr 18 16:35:02 2014 +0300

    drm/i915: vlv: factor out vlv_force_gfx_clock and check for pending force-of

but I'm not sure why.  It has caused problems for us in the past (see
85250ddf "drm/i915/chv: Remove Wait for a previous gfx force-off"
and 8d4eee9c "drm/i915: vlv: increase timeout when forcing on the
GFX clock") and doesn't seem to be required, so let's just drop it.

References: https://bugs.freedesktop.org/show_bug.cgi?id=89611Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: NDarren Hart <dvhart@linux.intel.com>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Cc: stable@vger.kernel.org # c9c52e24: drm/i915/chv: Remove Wait ...
Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
[danvet: Repick this commit from
5df0582b becuase Dave Airlie lost it
in his merge commit e1dee197.]
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

With the recent modeset internal rework, we wind up setting
crtc_state->enable to false, but leave crtc_state->active as true, which
is incorrect.  This mismatch gets caught by drm_atomic_crtc_check() and
causes subsequent atomic operations (such as plane updates while the
CRTC is disabled) to fail.

Bisect points to

        commit dad9a7d6d96630182fb52aae7c3856e9e7285e13
        Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
        Date:   Tue Apr 21 17:13:19 2015 +0300

            drm/i915: Use atomic helpers for computing changed flags

as the commit that actually triggers the regression.

v2: Update to alter in-flight state rather than already-committed state
    (first version was accidentally based on a midpoint of Ander's
    modeset rework series, before his final patches that add proper
    state swapping to the legacy modeset path).

Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Testcase: igt/kms_universal_plane
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A part of this function was indented with 2 tabs and 1 space instead of
just 2 tabs. We're going to touch that code, so start by re-indenting
it.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use partial view for huge BOs (bigger than half the mappable aperture)
in fault handler so that they can be accessed withough trying to make
room for them by evicting other objects.

v2:
- Only use partial views in the case where early rejection was
  previously done.
- Account variable type changes from previous reroll.
v3:
- Add a comment about overwriting existing page entries.
  (Tvrtko Ursulin)
- Whitespace fixes.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Partial view type allows manipulating parts of huge BOs through the GGTT,
which was not previously possible due to constraint that whole object had
to be mapped for any access to it through GGTT.

v2:
- Retain error value from sg_alloc_table (Tvrtko Ursulin)
- Do not zero already zeroed variable (Tvrtko Ursulin)
- Use more common variable types for page size/offset (Tvrtko Ursulin)
v3:
- Only compare additional view parameters when need to (Tvrtko Ursulin)
v4:
- Do zero out the variable that needs to be (bug introduced in v2).

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Do not skip special GGTT views when considering whether an object
is pinned or not.

Wrong behaviour was introduced in;

commit ec7adb6e
Author: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Date:   Mon Mar 16 14:11:13 2015 +0200

    drm/i915: Do not use ggtt_view with (aliasing) PPGTT

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

GGTT VMA sizes might be smaller than the whole object size due to
different GGTT views.

v2:
- Separate GGTT view constraint calculations from normal view
  constraint calculations (Chris Wilson)
v3:
- Do not bother with debug wording. (Tvrtko Ursulin)
v4:
- Clearer logic for calculating map_and_fenceable (Tvrtko Ursulin)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
[danvet: Drop BUG_ON, it's redudant.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reading a single value from the object, the locking only provides futile
protection against userspace races. The locking is useless so remove it.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Renaming gen9_rates to skl_rates because other platforms may have different
supported rates.
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that we do proper state swaps, we don't depend on this function
anymore to keep the state in sync.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replace the commit output state function with a simple swap of states.
Note that we still need to reconcile the legacy state after the swap,
since there are still code that relies on those.

Also note that even though changes to the state of a crtc different than
the one passed as an argument to __intel_set_mode() will be saved, the
modeset logic still deals with only one crtc.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>