提交 2e523e98 编写于 作者: V Ville Syrjälä 提交者: Daniel Vetter

drm/i915: Implement chv display PHY lane stagger setup

Set up the chv display PHY lane stagger registers according to
"Programming Guide for 1273 CHV eDP/DP/HDMI Display PHY" v1.04
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 ac935a8b
......@@ -961,6 +961,7 @@ enum skl_disp_power_wells {
#define _VLV_PCS_DW11_CH0 0x822c
#define _VLV_PCS_DW11_CH1 0x842c
#define DPIO_TX2_STAGGER_MASK(x) ((x)<<24)
#define DPIO_LANEDESKEW_STRAP_OVRD (1<<3)
#define DPIO_LEFT_TXFIFO_RST_MASTER (1<<1)
#define DPIO_RIGHT_TXFIFO_RST_MASTER (1<<0)
......@@ -973,8 +974,20 @@ enum skl_disp_power_wells {
#define VLV_PCS01_DW11(ch) _PORT(ch, _VLV_PCS01_DW11_CH0, _VLV_PCS01_DW11_CH1)
#define VLV_PCS23_DW11(ch) _PORT(ch, _VLV_PCS23_DW11_CH0, _VLV_PCS23_DW11_CH1)
#define _VLV_PCS01_DW12_CH0 0x0230
#define _VLV_PCS23_DW12_CH0 0x0430
#define _VLV_PCS01_DW12_CH1 0x2630
#define _VLV_PCS23_DW12_CH1 0x2830
#define VLV_PCS01_DW12(ch) _PORT(ch, _VLV_PCS01_DW12_CH0, _VLV_PCS01_DW12_CH1)
#define VLV_PCS23_DW12(ch) _PORT(ch, _VLV_PCS23_DW12_CH0, _VLV_PCS23_DW12_CH1)
#define _VLV_PCS_DW12_CH0 0x8230
#define _VLV_PCS_DW12_CH1 0x8430
#define DPIO_TX2_STAGGER_MULT(x) ((x)<<20)
#define DPIO_TX1_STAGGER_MULT(x) ((x)<<16)
#define DPIO_TX1_STAGGER_MASK(x) ((x)<<8)
#define DPIO_LANESTAGGER_STRAP_OVRD (1<<6)
#define DPIO_LANESTAGGER_STRAP(x) ((x)<<0)
#define VLV_PCS_DW12(ch) _PORT(ch, _VLV_PCS_DW12_CH0, _VLV_PCS_DW12_CH1)
#define _VLV_PCS_DW14_CH0 0x8238
......
......@@ -2732,7 +2732,7 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)
to_intel_crtc(encoder->base.crtc);
enum dpio_channel ch = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
int data, i;
int data, i, stagger;
u32 val;
mutex_lock(&dev_priv->dpio_lock);
......@@ -2772,7 +2772,38 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)
}
/* Data lane stagger programming */
/* FIXME: Fix up value only after power analysis */
if (intel_crtc->config->port_clock > 270000)
stagger = 0x18;
else if (intel_crtc->config->port_clock > 135000)
stagger = 0xd;
else if (intel_crtc->config->port_clock > 67500)
stagger = 0x7;
else if (intel_crtc->config->port_clock > 33750)
stagger = 0x4;
else
stagger = 0x2;
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
val |= DPIO_TX2_STAGGER_MASK(0x1f);
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
val |= DPIO_TX2_STAGGER_MASK(0x1f);
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW12(ch),
DPIO_LANESTAGGER_STRAP(stagger) |
DPIO_LANESTAGGER_STRAP_OVRD |
DPIO_TX1_STAGGER_MASK(0x1f) |
DPIO_TX1_STAGGER_MULT(6) |
DPIO_TX2_STAGGER_MULT(0));
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW12(ch),
DPIO_LANESTAGGER_STRAP(stagger) |
DPIO_LANESTAGGER_STRAP_OVRD |
DPIO_TX1_STAGGER_MASK(0x1f) |
DPIO_TX1_STAGGER_MULT(7) |
DPIO_TX2_STAGGER_MULT(5));
mutex_unlock(&dev_priv->dpio_lock);
......
......@@ -1487,7 +1487,7 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
&intel_crtc->config->base.adjusted_mode;
enum dpio_channel ch = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
int data, i;
int data, i, stagger;
u32 val;
mutex_lock(&dev_priv->dpio_lock);
......@@ -1527,7 +1527,38 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
}
/* Data lane stagger programming */
/* FIXME: Fix up value only after power analysis */
if (intel_crtc->config->port_clock > 270000)
stagger = 0x18;
else if (intel_crtc->config->port_clock > 135000)
stagger = 0xd;
else if (intel_crtc->config->port_clock > 67500)
stagger = 0x7;
else if (intel_crtc->config->port_clock > 33750)
stagger = 0x4;
else
stagger = 0x2;
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
val |= DPIO_TX2_STAGGER_MASK(0x1f);
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
val |= DPIO_TX2_STAGGER_MASK(0x1f);
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW12(ch),
DPIO_LANESTAGGER_STRAP(stagger) |
DPIO_LANESTAGGER_STRAP_OVRD |
DPIO_TX1_STAGGER_MASK(0x1f) |
DPIO_TX1_STAGGER_MULT(6) |
DPIO_TX2_STAGGER_MULT(0));
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW12(ch),
DPIO_LANESTAGGER_STRAP(stagger) |
DPIO_LANESTAGGER_STRAP_OVRD |
DPIO_TX1_STAGGER_MASK(0x1f) |
DPIO_TX1_STAGGER_MULT(7) |
DPIO_TX2_STAGGER_MULT(5));
/* Clear calc init */
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册