- 14 3月, 2015 13 次提交
-
-
由 Krzysztof Kozlowski 提交于
Change the ownership of power_supply structure from each driver implementing the class to the power supply core. The patch changes power_supply_register() function thus all drivers implementing power supply class are adjusted. Each driver provides the implementation of power supply. However it should not be the owner of power supply class instance because it is exposed by core to other subsystems with power_supply_get_by_name(). These other subsystems have no knowledge when the driver will unregister the power supply. This leads to several issues when driver is unbound - mostly because user of power supply accesses freed memory. Instead let the core own the instance of struct 'power_supply'. Other users of this power supply will still access valid memory because it will be freed when device reference count reaches 0. Currently this means "it will leak" but power_supply_put() call in next patches will solve it. This solves invalid memory references in following race condition scenario: Thread 1: charger manager Thread 2: power supply driver, used by charger manager THREAD 1 (charger manager) THREAD 2 (power supply driver) ========================== ============================== psy = power_supply_get_by_name() Driver unbind, .remove power_supply_unregister() Device fully removed psy->get_property() The 'get_property' call is executed in invalid context because the driver was unbound and struct 'power_supply' memory was freed. This could be observed easily with charger manager driver (here compiled with max17040 fuel gauge): $ cat /sys/devices/virtual/power_supply/cm-battery/capacity & $ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind [ 55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 55.732584] pgd = d98d4000 [ 55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000 [ 55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 55.746210] Modules linked in: [ 55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G W 3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496 [ 55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000 [ 55.771647] PC is at 0x0 [ 55.774182] LR is at charger_get_property+0x2f4/0x36c [ 55.779201] pc : [<00000000>] lr : [<c034b0b4>] psr: 60000013 [ 55.779201] sp : daf55e90 ip : 00000003 fp : 00000000 [ 55.790657] r10: 00000000 r9 : c06e2878 r8 : d9b26c68 [ 55.795865] r7 : dad81610 r6 : daec7410 r5 : daf55ebc r4 : 00000000 [ 55.802367] r3 : 00000000 r2 : daf55ebc r1 : 0000002a r0 : d9b26c68 [ 55.808879] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 55.815994] Control: 10c5387d Table: 598d406a DAC: 00000015 [ 55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210) [ 55.827451] Stack: (0xdaf55e90 to 0xdaf56000) [ 55.831795] 5e80: 60000013 c01459c4 0000002a c06f8ef8 [ 55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4 [ 55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80 [ 55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001 [ 55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000 [ 55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000 [ 55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124 [ 55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550 [ 55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364 [ 55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c [ 55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000 [ 55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000 [ 55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c) [ 55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48) [ 55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104) [ 55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28) [ 55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484) [ 55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c) [ 55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100) [ 55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c) [ 55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 56.000626] Code: bad PC value [ 56.011652] ---[ end trace 7b64343fbdae8ef1 ]--- Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [for the nvec part] Reviewed-by: NMarc Dietrich <marvin24@gmx.de> [for compal-laptop.c] Acked-by: NDarren Hart <dvhart@linux.intel.com> [for the mfd part] Acked-by: NLee Jones <lee.jones@linaro.org> [for the hid part] Acked-by: NJiri Kosina <jkosina@suse.cz> [for the acpi part] Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: NPavel Machek <pavel@ucw.cz> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NSebastian Reichel <sre@kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: NPavel Machek <pavel@ucw.cz> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NSebastian Reichel <sre@kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: NPavel Machek <pavel@ucw.cz> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NSebastian Reichel <sre@kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: NPavel Machek <pavel@ucw.cz> Acked-by: NLee Jones <lee.jones@linaro.org> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NSebastian Reichel <sre@kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: NPavel Machek <pavel@ucw.cz> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NSebastian Reichel <sre@kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property - set_property -> power_supply_set_property Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: NPavel Machek <pavel@ucw.cz> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NSebastian Reichel <sre@kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property - set_property -> power_supply_set_property - property_is_writeable -> power_supply_property_is_writeable Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: NPavel Machek <pavel@ucw.cz> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NSebastian Reichel <sre@kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Add simple wrappers for accessing power supply's function attributes: - get_property -> power_supply_get_property - set_property -> power_supply_set_property - property_is_writeable -> power_supply_property_is_writeable - external_power_changed -> power_supply_external_power_changed This API along with atomic usage counter adds a safe way of accessing a power supply from another driver. If power supply is unregistered after obtaining reference to it by some driver, then the API wrappers won't be executed in invalid (freed) context. Next patch changing the ownership of power supply class is still needed to fully fix race conditions in accessing freed power supply. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NSebastian Reichel <sre@kernel.org> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Add new structure 'power_supply_config' for holding run-time initialization data like of_node, supplies and private driver data. The power_supply_register() function is changed so all power supply drivers need updating. When registering the power supply this new 'power_supply_config' should be used instead of directly initializing 'struct power_supply'. This allows changing the ownership of power_supply structure from driver to the power supply core in next patches. When a driver does not use of_node or supplies then it should use NULL as config. If driver uses of_node or supplies then it should allocate config on stack and initialize it with proper values. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: NPavel Machek <pavel@ucw.cz> [for the nvec part] Reviewed-by: NMarc Dietrich <marvin24@gmx.de> [for drivers/platform/x86/compal-laptop.c] Reviewed-by: NDarren Hart <dvhart@linux.intel.com> [for drivers/hid/*] Reviewed-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Allow drivers to store private data inside power_supply structure for later usage in power supply operations. Usage of driver private data is necessary to access driver's state container object from power supply calls (like get_property()) if struct 'power_supply' is a stored there as a pointer, for example: struct some_driver_info { struct i2c_client *client; struct power_supply *power_supply; ... } In such case one cannot use container_of() and must store pointer to state container as private data. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NSebastian Reichel <sre@kernel.org> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
The return value of power_supply_register() call was not checked and even on error probe() function returned 0. If registering failed then during unbind the driver tried to unregister power supply which was not actually registered. This could lead to memory corruption because power_supply_unregister() unconditionally cleans up given power supply. Fix this by checking return status of power_supply_register() call. In case of failure, clean up sysfs entries and fail the probe. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 9be0fcb5 ("compal-laptop: add JHL90, battery & hwmon interface") Cc: <stable@vger.kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
The commit c2be45f0 ("compal-laptop: Use devm_hwmon_device_register_with_groups") wanted to change the registering of hwmon device to resource-managed version. It mostly did it except the main thing - it forgot to use devm-like function so the hwmon device leaked after device removal or probe failure. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: c2be45f0 ("compal-laptop: Use devm_hwmon_device_register_with_groups") Cc: <stable@vger.kernel.org> Acked-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NDarren Hart <dvhart@linux.intel.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
- 09 3月, 2015 1 次提交
-
-
由 Nicolas Saenz Julienne 提交于
The POWER_SUPPLY_PROP_STATUS case in gab_get_property() wasn't providing any value. Signed-off-by: NNicolas Saenz Julienne <nicolassaenzj@gmail.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
- 08 3月, 2015 5 次提交
-
-
由 Valentin Rothberg 提交于
All 5 IRQ handlers of the driver are requested as threaded interrupt handlers. However, only 1 handler can block. The remaining 4 handlers defer the actual handling to a workqueue. Hence, 4 of 5 IRQ handlers have a considerable overhead, since they are executed in a kernel thread to schedule another kernel thread (workqueue). This change splits up the 5 interrupt handlers into top halves (_th) and bottom halves (_bh) and resolves the aforementioned overhead by only requesting threaded interrupts (i.e., bottom halves) when necessary. Signed-off-by: NValentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Todd Brandt 提交于
New power_supply driver at driver/power which interfaces with the axp20x mfd driver as a cell. Provides battery info, monitors for changes, and generates alerts on temperature and capacity issues Signed-off-by: NTodd Brandt <todd.e.brandt@linux.intel.com> Acked-by: NJacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Todd Brandt 提交于
Name changes to the battery cell structure to a more generic cell type: fuel gauge. Signed-off-by: NTodd Brandt <todd.e.brandt@linux.intel.com> Acked-By: NSebastian Reichel <sre@kernel.org> Acked-by: NJacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Anda-Maria Nicolae 提交于
This patch adds bq24157s charger in the list of supported chargers. bq24157s is similar to bq24158, except for Bit6 from Special Charger Voltage/Enable Pin Status register, but this register is currently not used by bq2415x_charger. Signed-off-by: NAnda-Maria Nicolae <anda-maria.nicolae@intel.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Anda-Maria Nicolae 提交于
Fix coding style to comply with checkpatch.pl Signed-off-by: NAnda-Maria Nicolae <anda-maria.nicolae@intel.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
- 03 3月, 2015 1 次提交
-
-
由 Valentin Rothberg 提交于
Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request may fail. Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Signed-off-by: NValentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
- 01 3月, 2015 1 次提交
-
-
由 Alexandre Belloni 提交于
Add support for bq27510 to the bq27x00 driver. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
- 26 2月, 2015 19 次提交
-
-
由 NeilBrown 提交于
Using devm_power_supply_register allows the unregister to happen automatically on error or final put. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Pavel Machek 提交于
Cleanup comments for bq2415x_charger, bq27x00_battery.c. Signed-off-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Nicholas Mc Guire 提交于
Converting jiffies to milliseconds by "val * 1000 / HZ" is technically OK but jiffies_to_msecs(val) is the cleaner solution and handles all corner cases correctly. This is a minor API consolidation only and should make things more readable. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Nicholas Mc Guire 提交于
return type of wait_for_completion_timeout is unsigned long not int. as timeout is used for wait_for_completion_timeout exclusively here its type is simply changed to unsigned long. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Simplify a little ab8500_fg_sysfs_psy_create_attrs () and ab8500_fg_sysfs_psy_remove_attrs() functions because they received pointer to power supply device which was then converted into power supply instance. Then it was converted into struct ab8500_fg. The path looked like: ab8500_fg->psy.dev -> psy -> ab8500_fg Instead just pass pointer to struct ab8500_fg directly so all conversions won't be necessary. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Sebastian Reichel 提交于
-
由 Krzysztof Kozlowski 提交于
Driver forgot to unregister charger power supply if registering of battery supply failed in probe(). In such case the memory associated with power supply leaked. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 98a27664 ("power_supply: Add new lp8788 charger driver") Cc: <stable@vger.kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
The return values of create_singlethread_workqueue() and power_supply_register() calls were not checked and even on error probe() function returned 0. 1. If allocation of workqueue failed (returning NULL) then further accesses could lead to NULL pointer dereference. The queue_delayed_work() expects workqueue to be non-NULL. 2. If registration of power supply failed then during unbind the driver tried to unregister power supply which was not actually registered. This could lead to memory corruption because power_supply_unregister() unconditionally cleans up given power supply. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 00a588f9 ("power: add driver for battery reading on iPaq h3xxx") Cc: <stable@vger.kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Driver allocates singlethread workqueue in probe but it is not destroyed during removal. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 00a588f9 ("power: add driver for battery reading on iPaq h3xxx") Cc: <stable@vger.kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
The return value of power_supply_register() call was not checked and even on error probe() function returned 0. If registering failed then during unbind the driver tried to unregister power supply which was not actually registered. This could lead to memory corruption because power_supply_unregister() unconditionally cleans up given power supply. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: da0a00eb ("power: Add twl4030_madc battery driver.") Cc: <stable@vger.kernel.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Consolidate regmap_read() and regmap_write() into one regmap_update_bits() call. This is more readable and safer because regmap's mutex will prevent any concurrent access to modified registers (the concurrent access could happen through max17042_init_chip() in scheduled work). Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
The scheduled work in max17040_battery driver reads device parameters and stores them in memory. Any CPU could do that so use system efficient workqueues to limit unnecessary CPU wake ups. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Re-work and fix handling of errors when retrieving power supply properties: 1. Return errno values directly from get_property() instead of storing 'unknown' as intval for given property. 2. Handle regmap_read() errors and return errno code. Previously the regmap_read() return code was ignored so an uninitialized value from the stack could be used for calculating the property. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Remove caching of charging and battery states in driver's state container because the cached value was not used later. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Re-work and fix handling of errors when retrieving power supply properties: 1. Return errno values directly from get_property() instead of storing 'unknown' as intval for given property. 2. Handle regmap_read() errors when getting 'online' and 'present' proprties and return errno code. Previously the regmap_read() return code was ignored so an uninitialized value from the stack could be used for calculating the property. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Geert Uytterhoeven 提交于
Use subdir-ccflags-* instead of ccflags-* to inherit the debug settings from Kconfig when traversing subdirectories. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 NeilBrown 提交于
power_supply status changes for the bq27x00 are only noticed via polling, not via interrupts. So they are never the source of events which should reliably wake the system from suspend. So it is appropriate to register as a no_ws power source, just like the ACPI battery. This removes some debugging messages which occasionally confusingly identify bq27x00 as a wakeup source. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Krzysztof Kozlowski 提交于
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
由 Adam Thomson 提交于
Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-