- 25 5月, 2017 12 次提交
-
-
由 Vlad Yasevich 提交于
Since virtio does not provide it's own ndo_features_check handler, TSO, and now checksum offload, are disabled for stacked vlans. Re-enable the support and let the host take care of it. This restores/improves Guest-to-Guest performance over Q-in-Q vlans. Acked-by: NJason Wang <jasowang@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
At least some of the be2net cards do not seem to be capabled of performing checksum offload computions on Q-in-Q packets. In these case, the recevied checksum on the remote is invalid and TCP syn packets are dropped. This patch adds a call to check disbled acceleration features on Q-in-Q tagged traffic. CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
It appears that TCP checksum offloading has been broken for Q-in-Q vlans. The behavior was execerbated by the series commit afb0bc97 ("Merge branch 'stacked_vlan_tso'") that that enabled accleleration features on stacked vlans. However, event without that series, it is possible to trigger this issue. It just requires a lot more specialized configuration. The root cause is the interaction between how netdev_intersect_features() works, the features actually set on the vlan devices and HW having the ability to run checksum with longer headers. The issue starts when netdev_interesect_features() replaces NETIF_F_HW_CSUM with a combination of NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM, if the HW advertises IP|IPV6 specific checksums. This happens for tagged and multi-tagged packets. However, HW that enables IP|IPV6 checksum offloading doesn't gurantee that packets with arbitrarily long headers can be checksummed. This patch disables IP|IPV6 checksums on the packet for multi-tagged packets. CC: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> CC: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com> Acked-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
The 88m1101 has an errata when configuring autoneg. However, it was being applied to many other Marvell PHYs as well. Limit its scope to just the 88m1101. Fixes: 76884679 ("phylib: Add support for Marvell 88e1111S and 88e1145") Reported-by: NDaniel Walker <danielwa@cisco.com> Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NHarini Katakam <harinik@xilinx.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix build errors by making this driver depend on OF_MDIO, like several other similar drivers do. drivers/built-in.o: In function `octeon_mdiobus_remove': mdio-octeon.c:(.text+0x196ee0): undefined reference to `mdiobus_unregister' mdio-octeon.c:(.text+0x196ee8): undefined reference to `mdiobus_free' drivers/built-in.o: In function `octeon_mdiobus_probe': mdio-octeon.c:(.text+0x196f1d): undefined reference to `devm_mdiobus_alloc_size' mdio-octeon.c:(.text+0x196ffe): undefined reference to `of_mdiobus_register' mdio-octeon.c:(.text+0x197010): undefined reference to `mdiobus_free' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux由 David S. Miller 提交于
Saeed Mahameed says: ==================== mlx5-fixes-2017-05-23 Some TC offloads fixes from Or Gerlitz. From Erez, mlx5 IPoIB RX fix to improve GRO. From Mohamad, Command interface fix to improve mitigation against FW commands timeouts. From Tariq, Driver load Tolerance against affinity settings failures. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'mac80211-for-davem-2017-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just two fixes this time: * fix the scheduled scan "BUG: scheduling while atomic" * check mesh address extension flags more strictly ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Potapenko 提交于
rtnl_fdb_dump() failed to check the result of nlmsg_parse(), which led to contents of |ifm| being uninitialized because nlh->nlmsglen was too small to accommodate |ifm|. The uninitialized data may affect some branches and result in unwanted effects, although kernel data doesn't seem to leak to the userspace directly. The bug has been detected with KMSAN and syzkaller. For the record, here is the KMSAN report: ================================================================== BUG: KMSAN: use of unitialized memory in rtnl_fdb_dump+0x5dc/0x1000 CPU: 0 PID: 1039 Comm: probe Not tainted 4.11.0-rc5+ #2727 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x143/0x1b0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007 __kmsan_warning_32+0x66/0xb0 mm/kmsan/kmsan_instr.c:491 rtnl_fdb_dump+0x5dc/0x1000 net/core/rtnetlink.c:3230 netlink_dump+0x84f/0x1190 net/netlink/af_netlink.c:2168 __netlink_dump_start+0xc97/0xe50 net/netlink/af_netlink.c:2258 netlink_dump_start ./include/linux/netlink.h:165 rtnetlink_rcv_msg+0xae9/0xb40 net/core/rtnetlink.c:4094 netlink_rcv_skb+0x339/0x5a0 net/netlink/af_netlink.c:2339 rtnetlink_rcv+0x83/0xa0 net/core/rtnetlink.c:4110 netlink_unicast_kernel net/netlink/af_netlink.c:1272 netlink_unicast+0x13b7/0x1480 net/netlink/af_netlink.c:1298 netlink_sendmsg+0x10b8/0x10f0 net/netlink/af_netlink.c:1844 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 ___sys_sendmsg+0xd4b/0x10f0 net/socket.c:1997 __sys_sendmsg net/socket.c:2031 SYSC_sendmsg+0x2c6/0x3f0 net/socket.c:2042 SyS_sendmsg+0x87/0xb0 net/socket.c:2038 do_syscall_64+0x102/0x150 arch/x86/entry/common.c:285 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246 RIP: 0033:0x401300 RSP: 002b:00007ffc3b0e6d58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000401300 RDX: 0000000000000000 RSI: 00007ffc3b0e6d80 RDI: 0000000000000003 RBP: 00007ffc3b0e6e00 R08: 000000000000000b R09: 0000000000000004 R10: 000000000000000d R11: 0000000000000246 R12: 0000000000000000 R13: 00000000004065a0 R14: 0000000000406630 R15: 0000000000000000 origin: 000000008fe00056 save_stack_trace+0x59/0x60 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:352 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:247 kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:260 slab_alloc_node mm/slub.c:2743 __kmalloc_node_track_caller+0x1f4/0x390 mm/slub.c:4349 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x2cd/0x740 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:933 netlink_alloc_large_skb net/netlink/af_netlink.c:1144 netlink_sendmsg+0x934/0x10f0 net/netlink/af_netlink.c:1819 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 ___sys_sendmsg+0xd4b/0x10f0 net/socket.c:1997 __sys_sendmsg net/socket.c:2031 SYSC_sendmsg+0x2c6/0x3f0 net/socket.c:2042 SyS_sendmsg+0x87/0xb0 net/socket.c:2038 do_syscall_64+0x102/0x150 arch/x86/entry/common.c:285 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246 ================================================================== and the reproducer: ================================================================== #include <sys/socket.h> #include <net/if_arp.h> #include <linux/netlink.h> #include <stdint.h> int main() { int sock = socket(PF_NETLINK, SOCK_DGRAM | SOCK_NONBLOCK, 0); struct msghdr msg; memset(&msg, 0, sizeof(msg)); char nlmsg_buf[32]; memset(nlmsg_buf, 0, sizeof(nlmsg_buf)); struct nlmsghdr *nlmsg = nlmsg_buf; nlmsg->nlmsg_len = 0x11; nlmsg->nlmsg_type = 0x1e; // RTM_NEWROUTE = RTM_BASE + 0x0e // type = 0x0e = 1110b // kind = 2 nlmsg->nlmsg_flags = 0x101; // NLM_F_ROOT | NLM_F_REQUEST nlmsg->nlmsg_seq = 0; nlmsg->nlmsg_pid = 0; nlmsg_buf[16] = (char)7; struct iovec iov; iov.iov_base = nlmsg_buf; iov.iov_len = 17; msg.msg_iov = &iov; msg.msg_iovlen = 1; sendmsg(sock, &msg, 0); return 0; } ================================================================== Signed-off-by: NAlexander Potapenko <glider@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quentin Schulz 提交于
Some PHY require to wait for a bit after the reset GPIO has been toggled. This adds support for the DT property `phy-reset-post-delay` which gives the delay in milliseconds to wait after reset. If the DT property is not given, no delay is observed. Post reset delay greater than 1000ms are invalid. Signed-off-by: NQuentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NFugang Duan <fugang.duan@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Xin Long says: ==================== sctp: a bunch of fixes for processing dupcookie After introducing transport hashtable and per stream info into sctp, some regressions were caused when processing dupcookie, this patchset is to fix them. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
After sctp changed to use transport hashtable, a transport would be added into global hashtable when adding the peer to an asoc, then the asoc can be got by searching the transport in the hashtbale. The problem is when processing dupcookie in sctp_sf_do_5_2_4_dupcook, a new asoc would be created. A peer with the same addr and port as the one in the old asoc might be added into the new asoc, but fail to be added into the hashtable, as they also belong to the same sk. It causes that sctp's dupcookie processing can not really work. Since the new asoc will be freed after copying it's information to the old asoc, it's more like a temp asoc. So this patch is to fix it by setting it as a temp asoc to avoid adding it's any transport into the hashtable and also avoid allocing assoc_id. An extra thing it has to do is to also alloc stream info for any temp asoc, as sctp dupcookie process needs it to update old asoc. But I don't think it would hurt something, as a temp asoc would always be freed after finishing processing cookie echo packet. Reported-by: NJianwen Ji <jiji@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Since commit 3dbcc105 ("sctp: alloc stream info when initializing asoc"), stream and stream.out info are always alloced when creating an asoc. So it's not correct to check !asoc->stream before updating stream info when processing dupcookie, but would be better to check asoc state instead. Fixes: 3dbcc105 ("sctp: alloc stream info when initializing asoc") Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 5月, 2017 27 次提交
-
-
由 Jesper Dangaard Brouer 提交于
Masks for extracting part of the Completion Queue Entry (CQE) field rss_hash_type was swapped, namely CQE_RSS_HTYPE_IP and CQE_RSS_HTYPE_L4. The bug resulted in setting skb->l4_hash, even-though the rss_hash_type indicated that hash was NOT computed over the L4 (UDP or TCP) part of the packet. Added comments from the datasheet, to make it more clear what these masks are selecting. Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Neukum 提交于
Some devices need their multicast filter reset but others are crashed by that. So the methods need to be separated. Signed-off-by: NOliver Neukum <oneukum@suse.com> Reported-by: N"Ridgway, Keith" <kridgway@harris.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec由 David S. Miller 提交于
Steffen Klassert says: ==================== pull request (net): ipsec 2017-05-23 1) Fix wrong header offset for esp4 udpencap packets. 2) Fix a stack access out of bounds when creating a bundle with sub policies. From Sabrina Dubroca. 3) Fix slab-out-of-bounds in pfkey due to an incorrect sadb_x_sec_len calculation. 4) We checked the wrong feature flags when taking down an interface with IPsec offload enabled. Fix from Ilan Tayari. 5) Copy the anti replay sequence numbers when doing a state migration, otherwise we get out of sync with the sequence numbers. Fix from Antony Antony. Please pull or let me know if there are problems. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tariq Toukan 提交于
Add tolerance to failures of irq_set_affinity_hint(). Its role is to give hints that optimizes performance, and should not block the driver load. In non-SMP systems, functionality is not available as there is a single core, and all these calls definitely fail. Hence, do not call the function and avoid the warning prints. Fixes: db058a18 ("net/mlx5_core: Set irq affinity hints") Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Mohamad Haj Yahia 提交于
Currently when firmware command gets stuck or it takes long time to complete, the driver command will get timeout and the command slot is freed and can be used for new commands, and if the firmware receive new command on the old busy slot its behavior is unexpected and this could be harmful. To fix this when the driver command gets timeout we return failure, but we don't free the command slot and we wait for the firmware to explicitly respond to that command. Once all the entries are busy we will stop processing new firmware commands. Fixes: 9cba4ebc ('net/mlx5: Fix potential deadlock in command mode change') Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Erez Shitrit 提交于
IPoIB packet contains the pseudo header area, we need to pull it prior to reset_mac_header in order to let the GRO work well. In more details: GRO checks the mac address of the new coming packet, it does that by comparing the hard_header_len size of the current packet to the previous one in that session, the comparison is over hard_header_len size. Now, the driver prepares that area in the skb by allocating area from the reserved part and resetting the correct mac header to it. Fixes: 9d6bd752 ("net/mlx5e: IPoIB, RX handler") Signed-off-by: NErez Shitrit <erezsh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
The sparse tool emits these correct complaints: drivers/net/ethernet/mellanox/mlx5/core//en_tc.c:1005:25: warning: cast to restricted __be32 drivers/net/ethernet/mellanox/mlx5/core//en_tc.c:1007:25: warning: cast to restricted __be16 The value is provided from user-space in network order, but there's no way for them to realize that, avoid the warnings by casting to the appropriate type. Fixes: d79b6df6 ('net/mlx5e: Add parsing of TC pedit actions to HW format') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reported-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NPaul Blakey <paulb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
Currently we don't support partial header re-writes through TC pedit action offloading. However, the code that enforces that wasn't err-ing on cases where the first and last bits of the mask are set but there is some zero bit between them, such as in the below example, fix that! tc filter add dev enp1s0 protocol ip parent ffff: prio 10 flower ip_proto udp dst_port 2001 skip_sw action pedit munge ip src set 1.0.0.1 retain 0xff0000ff Fixes: d79b6df6 ('net/mlx5e: Add parsing of TC pedit actions to HW format') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NPaul Blakey <paulb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
When offloading header re-writes, the HW re-calculates the relevant L3/L4 checksums. Hence, when upper layers (as done by OVS) ask for TC checksum action offload together with pedit offload, don't err. This command now works: tc filter add dev ens1f0 protocol ip parent ffff: prio 20 flower skip_sw ip_proto tcp dst_port 9001 action pedit ex munge tcp dport set 0x1234 pipe action csum tcp Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reported-by: NPaul Blakey <paulb@mellanox.com> Reviewed-by: NPaul Blakey <paulb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
Add the accessors for realizing if this is a csum action, and for which fields checksum is needed. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NPaul Blakey <paulb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
We wrongly direcly invoke hlist_del_rcu() and not hash_del_rcu() which does a slightly different call now and may change later, fix that. Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reported-by: NPaul Blakey <paulb@mellanox.com> Reviewed-by: NPaul Blakey <paulb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Arend Van Spriel 提交于
Drivers should be able to call cfg80211_sched_scan_results() from atomic context. However, with the introduction of multiple scheduled scan feature this requirement was not taken into account resulting in regression shown below. [ 119.021594] BUG: scheduling while atomic: irq/47-iwlwifi/517/0x00000200 [ 119.021604] Modules linked in: [...] [ 119.021759] CPU: 1 PID: 517 Comm: irq/47-iwlwifi Not tainted 4.12.0-rc2-t440s-20170522+ #1 [ 119.021763] Hardware name: LENOVO 20AQS03H00/20AQS03H00, BIOS GJET91WW (2.41 ) 09/21/2016 [ 119.021766] Call Trace: [ 119.021778] ? dump_stack+0x5c/0x84 [ 119.021784] ? __schedule_bug+0x4c/0x70 [ 119.021792] ? __schedule+0x496/0x5c0 [ 119.021798] ? schedule+0x2d/0x80 [ 119.021804] ? schedule_preempt_disabled+0x5/0x10 [ 119.021810] ? __mutex_lock.isra.0+0x18e/0x4c0 [ 119.021817] ? __wake_up+0x2f/0x50 [ 119.021833] ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211] [ 119.021844] ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211] [ 119.021859] ? iwl_mvm_rx_lmac_scan_iter_complete_notif+0x17/0x30 [iwlmvm] [ 119.021869] ? iwl_pcie_rx_handle+0x2a9/0x7e0 [iwlwifi] [ 119.021878] ? iwl_pcie_irq_handler+0x17c/0x730 [iwlwifi] [ 119.021884] ? irq_forced_thread_fn+0x60/0x60 [ 119.021887] ? irq_thread_fn+0x16/0x40 [ 119.021892] ? irq_thread+0x109/0x180 [ 119.021896] ? wake_threads_waitq+0x30/0x30 [ 119.021901] ? kthread+0xf2/0x130 [ 119.021905] ? irq_thread_dtor+0x90/0x90 [ 119.021910] ? kthread_create_on_node+0x40/0x40 [ 119.021915] ? ret_from_fork+0x26/0x40 Fixes: b34939b9 ("cfg80211: add request id to cfg80211_sched_scan_*() api") Reported-by: NSander Eikelenboom <linux@eikelenboom.it> Signed-off-by: NArend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull pstore fix from Kees Cook: "Marta noticed another misbehavior in EFI pstore, which this fixes. Hopefully this is the last of the v4.12 fixes for pstore!" * tag 'pstore-v4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: efi-pstore: Fix write/erase id tracking
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fixes from Rafael Wysocki: "These revert a 4.11 change that turned out to be problematic and add a .gitignore file. Specifics: - Revert a 4.11 commit related to the ACPI-based handling of laptop lids that made changes incompatible with existing user space stacks and broke things there (Lv Zheng). - Add .gitignore to the ACPI tools directory (Prarit Bhargava)" * tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / button: Remove lid_init_state=method mode" tools/power/acpi: Add .gitignore file
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "These fix RTC wakeup from suspend-to-idle broken recently, fix CPU idleness detection condition in the schedutil cpufreq governor, fix a cpufreq driver build failure, fix an error code path in the power capping framework, clean up the hibernate core and update the intel_pstate documentation. Specifics: - Fix RTC wakeup from suspend-to-idle broken by the recent rework of ACPI wakeup handling (Rafael Wysocki). - Update intel_pstate driver documentation to reflect the current code and explain how it works in more detail (Rafael Wysocki). - Fix an issue related to CPU idleness detection on systems with shared cpufreq policies in the schedutil governor (Juri Lelli). - Fix a possible build issue in the dbx500 cpufreq driver (Arnd Bergmann). - Fix a function in the power capping framework core to return an error code instead of 0 when there's an error (Dan Carpenter). - Clean up variable definition in the hibernation core (Pushkar Jambhlekar)" * tag 'pm-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: dbx500: add a Kconfig symbol PM / hibernate: Declare variables as static PowerCap: Fix an error code in powercap_register_zone() RTC: rtc-cmos: Fix wakeup from suspend-to-idle PM / wakeup: Fix up wakeup_source_report_event() cpufreq: intel_pstate: Document the current behavior and user interface cpufreq: schedutil: use now as reference when aggregating shared policy requests
-
由 Jan Kiszka 提交于
We need to initializes those variables to 0 for platforms that do not provide ACPI parameters. Otherwise, we set sda_hold_time to random values, breaking e.g. Galileo and IOT2000 boards. Reported-and-tested-by: NLinus Torvalds <torvalds@linux-foundation.org> Reported-by: NTobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Fixes: 9d640843 ("i2c: designware: don't infer timings described by ACPI from clock rate") Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
Prior to the pstore interface refactoring, the "id" generated during a backend pstore_write() was only retained by the internal pstore inode tracking list. Additionally the "part" was ignored, so EFI would encode this in the id. This corrects the misunderstandings and correctly sets "id" during pstore_write(), and uses "part" directly during pstore_erase(). Reported-by: NMarta Lofstedt <marta.lofstedt@intel.com> Fixes: 76cc9580 ("pstore: Replace arguments for write() API") Fixes: a61072aa ("pstore: Replace arguments for erase() API") Signed-off-by: NKees Cook <keescook@chromium.org> Tested-by: NMarta Lofstedt <marta.lofstedt@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Mostly netfilter bug fixes in here, but we have some bits elsewhere as well. 1) Don't do SNAT replies for non-NATed connections in IPVS, from Julian Anastasov. 2) Don't delete conntrack helpers while they are still in use, from Liping Zhang. 3) Fix zero padding in xtables's xt_data_to_user(), from Willem de Bruijn. 4) Add proper RCU protection to nf_tables_dump_set() because we cannot guarantee that we hold the NFNL_SUBSYS_NFTABLES lock. From Liping Zhang. 5) Initialize rcv_mss in tcp_disconnect(), from Wei Wang. 6) smsc95xx devices can't handle IPV6 checksums fully, so don't advertise support for offloading them. From Nisar Sayed. 7) Fix out-of-bounds access in __ip6_append_data(), from Eric Dumazet. 8) Make atl2_probe() propagate the error code properly on failures, from Alexey Khoroshilov. 9) arp_target[] in bond_check_params() is used uninitialized. This got changes from a global static to a local variable, which is how this mistake happened. Fix from Jarod Wilson. 10) Fix fallout from unnecessary NULL check removal in cls_matchall, from Jiri Pirko. This is definitely brown paper bag territory..." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) net: sched: cls_matchall: fix null pointer dereference vsock: use new wait API for vsock_stream_sendmsg() bonding: fix randomly populated arp target array net: Make IP alignment calulations clearer. bonding: fix accounting of active ports in 3ad net: atheros: atl2: don't return zero on failure path in atl2_probe() ipv6: fix out of bound writes in __ip6_append_data() bridge: start hello_timer when enabling KERNEL_STP in br_stp_start smsc95xx: Support only IPv4 TCP/UDP csum offload arp: always override existing neigh entries with gratuitous ARP arp: postpone addr_type calculation to as late as possible arp: decompose is_garp logic into a separate function arp: fixed error in a comment tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0 netfilter: xtables: fix build failure from COMPAT_XT_ALIGN outside CONFIG_COMPAT ebtables: arpreply: Add the standard target sanity check netfilter: nf_tables: revisit chain/object refcounting from elements netfilter: nf_tables: missing sanitization in data from userspace netfilter: nf_tables: can't assume lock is acquired when dumping set elems netfilter: synproxy: fix conntrackd interaction ...
-
由 Jiri Pirko 提交于
Since the head is guaranteed by the check above to be null, the call_rcu would explode. Remove the previously logically dead code that was made logically very much alive and kicking. Fixes: 985538ee ("net/sched: remove redundant null check on head") Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
As reported by Michal, vsock_stream_sendmsg() could still sleep at vsock_stream_has_space() after prepare_to_wait(): vsock_stream_has_space vmci_transport_stream_has_space vmci_qpair_produce_free_space qp_lock qp_acquire_queue_mutex mutex_lock Just switch to the new wait API like we did for commit d9dc8b0f ("net: fix sleeping for sk_wait_event()"). Reported-by: NMichal Kubecek <mkubecek@suse.cz> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarod Wilson 提交于
In commit dc9c4d0f, the arp_target array moved from a static global to a local variable. By the nature of static globals, the array used to be initialized to all 0. At present, it's full of random data, which that gets interpreted as arp_target values, when none have actually been specified. Systems end up booting with spew along these lines: [ 32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready [ 32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready [ 32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0 [ 32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready [ 32.204892] lacp0: Setting MII monitoring interval to 100 [ 32.211071] lacp0: Removing ARP target 216.124.228.17 [ 32.216824] lacp0: Removing ARP target 218.160.255.255 [ 32.222646] lacp0: Removing ARP target 185.170.136.184 [ 32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal [ 32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255) [ 32.243987] lacp0: Removing ARP target 56.125.228.17 [ 32.249625] lacp0: Removing ARP target 218.160.255.255 [ 32.255432] lacp0: Removing ARP target 15.157.233.184 [ 32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal [ 32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255) [ 32.276632] lacp0: Removing ARP target 16.0.0.0 [ 32.281755] lacp0: Removing ARP target 218.160.255.255 [ 32.287567] lacp0: Removing ARP target 72.125.228.17 [ 32.293165] lacp0: Removing ARP target 218.160.255.255 [ 32.298970] lacp0: Removing ARP target 8.125.228.17 [ 32.304458] lacp0: Removing ARP target 218.160.255.255 None of these were actually specified as ARP targets, and the driver does seem to clean up the mess okay, but it's rather noisy and confusing, leaks values to userspace, and the 255.255.255.255 spew shows up even when debug prints are disabled. The fix: just zero out arp_target at init time. While we're in here, init arp_all_targets_value in the right place. Fixes: dc9c4d0f ("bonding: reduce scope of some global variables") CC: Mahesh Bandewar <maheshb@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: NJarod Wilson <jarod@redhat.com> Acked-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafael J. Wysocki 提交于
* pm-sleep: PM / hibernate: Declare variables as static RTC: rtc-cmos: Fix wakeup from suspend-to-idle PM / wakeup: Fix up wakeup_source_report_event() * powercap: PowerCap: Fix an error code in powercap_register_zone()
-
由 Rafael J. Wysocki 提交于
* acpi-button: Revert "ACPI / button: Remove lid_init_state=method mode" * acpi-tools: tools/power/acpi: Add .gitignore file
-
由 Rafael J. Wysocki 提交于
* intel_pstate: cpufreq: intel_pstate: Document the current behavior and user interface * pm-cpufreq: cpufreq: dbx500: add a Kconfig symbol * pm-cpufreq-sched: cpufreq: schedutil: use now as reference when aggregating shared policy requests
-
由 David S. Miller 提交于
The assignmnet: ip_align = strict ? 2 : NET_IP_ALIGN; in compare_pkt_ptr_alignment() trips up Coverity because we can only get to this code when strict is true, therefore ip_align will always be 2 regardless of NET_IP_ALIGN's value. So just assign directly to '2' and explain the situation in the comment above. Reported-by: N"Gustavo A. R. Silva" <garsilva@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarod Wilson 提交于
As of 7bb11dc9 and 0622cab0, bond slaves in a 3ad bond are not removed from the aggregator when they are down, and the active slave count is NOT equal to number of ports in the aggregator, but rather the number of ports in the aggregator that are still enabled. The sysfs spew for bonding_show_ad_num_ports() has a comment that says "Show number of active 802.3ad ports.", but it's currently showing total number of ports, both active and inactive. Remedy it by using the same logic introduced in 0622cab0 in __bond_3ad_get_active_agg_info(), so sysfs, procfs and netlink all report the number of active ports. Note that this means that IFLA_BOND_AD_INFO_NUM_PORTS really means NUM_ACTIVE_PORTS instead of NUM_PORTS, and thus perhaps should be renamed for clarity. Lightly tested on a dual i40e lacp bond, simulating link downs with an ip link set dev <slave2> down, was able to produce the state where I could see both in the same aggregator, but a number of ports count of 1. MII Status: up Active Aggregator Info: Aggregator ID: 1 Number of ports: 2 <--- Slave Interface: ens10 MII Status: up <--- Aggregator ID: 1 Slave Interface: ens11 MII Status: up Aggregator ID: 1 MII Status: up Active Aggregator Info: Aggregator ID: 1 Number of ports: 1 <--- Slave Interface: ens10 MII Status: down <--- Aggregator ID: 1 Slave Interface: ens11 MII Status: up Aggregator ID: 1 CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org Signed-off-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Khoroshilov 提交于
If dma mask checks fail in atl2_probe(), it breaks off initialization, deallocates all resources, but returns zero. The patch adds proper error code return value and make error code setup unified. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 5月, 2017 1 次提交
-
-
由 Eric Dumazet 提交于
Andrey Konovalov and idaifish@gmail.com reported crashes caused by one skb shared_info being overwritten from __ip6_append_data() Andrey program lead to following state : copy -4200 datalen 2000 fraglen 2040 maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200 The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen, fraggap, 0); is overwriting skb->head and skb_shared_info Since we apparently detect this rare condition too late, move the code earlier to even avoid allocating skb and risking crashes. Once again, many thanks to Andrey and syzkaller team. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NAndrey Konovalov <andreyknvl@google.com> Tested-by: NAndrey Konovalov <andreyknvl@google.com> Reported-by: <idaifish@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-