- 23 3月, 2018 1 次提交
-
-
由 Maciej W. Rozycki 提交于
In order to fetch the correct entry point with the ISA bit included, for use by non-ELF boot loaders, parse the output of `objdump -f' for the start address recorded in the kernel executable itself, rather than using `nm' to get the value of the `kernel_entry' symbol. Sign-extend the address retrieved if 32-bit, so that execution is correctly started on 64-bit processors as well. The tool always prints the entry point using either 8 or 16 hexadecimal digits, matching the address width (aka class) of the ELF file, even in the presence of leading zeros. Signed-off-by: NMaciej W. Rozycki <macro@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18912/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
- 22 3月, 2018 6 次提交
-
-
由 Alexandre Belloni 提交于
Add myself as a maintainer for the Microsemi MIPS SoCs. Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Allan Nielsen <Allan.Nielsen@microsemi.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18857/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Alexandre Belloni 提交于
Introduce support for the MIPS based Microsemi Ocelot SoCs. Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Allan Nielsen <Allan.Nielsen@microsemi.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18858/ [jhogan@kernel.org: update ocelot_defconfig specification] Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Alexandre Belloni 提交于
Add a device tree for the Microsemi Ocelot PCB123 evaluation board. Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Allan Nielsen <Allan.Nielsen@microsemi.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18856/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Alexandre Belloni 提交于
Add a device tree include file for the Microsemi Ocelot SoC. Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Allan Nielsen <Allan.Nielsen@microsemi.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18855/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Alexandre Belloni 提交于
Add bindings for Microsemi SoCs. Currently only Ocelot is supported. Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: NRob Herring <robh+dt@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Allan Nielsen <Allan.Nielsen@microsemi.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18854/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Alexandre Belloni 提交于
Microsemi Corporation provides semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: NRob Herring <robh@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Allan Nielsen <Allan.Nielsen@microsemi.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18853/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
- 14 3月, 2018 2 次提交
-
-
由 Mathias Kresin 提交于
According to the QCA u-boot source the "PCIE Phase Lock Loop Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the QCA955X and QCA956X at offset 0x10. Since the PCIE PLL config register is only defined for the AR724x fix only this value. The value is wrong since the day it was added and isn't used by any driver yet. Signed-off-by: NMathias Kresin <dev@kresin.me> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16048/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Daniel Golle 提交于
Use PCIe support for MT7628AN also on MT7688. Tested on WRTNODE2R. Signed-off-by: NDaniel Golle <daniel@makrotopia.org> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-mediatek@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/16223/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
- 09 3月, 2018 7 次提交
-
-
由 Matt Redfearn 提交于
If a JTAG probe is connected to a MIPS cluster, then the CPC detects it and latches the CPC.STAT_CONF.EJTAG_PROBE bit to 1. While set, attempting to send a power-down command to a core will be blocked, and the CPC will instead send the core to clock-off state. This can interfere with systems fully entering a low power state where all cores, CM, GIC, etc are powered down. Detect that a JTAG probe is / has been connected to the cluster and block the suspend attempt. Attempting to suspend the system while a JTAG probe is connected now yields: # echo mem > /sys/power/state [ 11.654000] PM: Syncing filesystems ... done. [ 11.658000] JTAG probe is connected - abort suspend -sh: echo: write error: Operation not permitted # To restore suspend, the JTAG probe should be disconnected or put into quiescent state. Platform code can then clear the CPC.STAT_CONF.EJTAG_PROBE bit. Reported-by: NEd Blake <ed.blake@sondrel.com> Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18641/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Matt Redfearn 提交于
Remove the need to check that __mips_isa_rev is defined by using the newly added MIPS_ISA_REV. Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18678/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Matt Redfearn 提交于
Remove the need to check that __mips_isa_rev is defined by using the newly added MIPS_ISA_REV. Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18677/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Matt Redfearn 提交于
Remove the need to check that __mips_isa_rev is defined by using the newly added MIPS_ISA_REV. Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: "Maciej W. Rozycki" <macro@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18675/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Matt Redfearn 提交于
There are multiple instances in the kernel where we need to include or exclude particular instructions based on the ISA revision of the target processor. For MIPS32 / MIPS64, the compiler exports a __mips_isa_rev define. However, when targeting MIPS I - V, this define is absent. This leads to each use of __mips_isa_rev having to check that it is defined first. To simplify this, introduce the isa-rev.h header which always exports MIPS_ISA_REV. The name is changed so as to avoid confusion with the compiler builtin and to avoid accidentally using the builtin. MIPS_ISA_REV is defined to the compilers builtin if provided, or 0, which satisfies all current usages. Suggested-by: NPaul Burton <paul.burton@mips.com> Signed-off-by: NMatt Redfearn <matt.redfearn@mips.com> Reviewed-by: NMaciej W. Rozycki <macro@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18676/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Paul Burton 提交于
The generic MIPS implementations of halting, powering down or restarting the system all hang using a busy loop as a last resort. We have many platforms which avoid this loop by implementing their own, many using some variation upon executing a wait instruction to lower CPU power usage if we reach this point. In order to prepare for cleaning up these various custom implementations of the same thing, this patch makes the generic machine_halt(), machine_power_off() & machine_restart() functions each make use of the wait instruction to lower CPU power usage in cases where we know that the wait instruction is available. If wait isn't known to be supported then we fall back to calling cpu_wait(), and if we don't have a cpu_wait() callback then we effectively continue using a busy loop. In effect the new machine_hang() function provides a superset of the functionality that the various platforms currently provide differing subsets of. Signed-off-by: NPaul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17178/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Andy Shevchenko 提交于
Replace sscanf() with mac_pton(). Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NHauke Mehrtens <hauke@hauke-m.de> Cc: David S. Miller <davem@davemloft.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17982/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
- 06 3月, 2018 3 次提交
-
-
由 Jaedon Shin 提交于
Adds watchdog device nodes to BCM7xxx MIPS based SoCs. Signed-off-by: NJaedon Shin <jaedon.shin@gmail.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17729/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Jaedon Shin 提交于
Adds wake-up timer device nodes to BCM7xxx MIPS based SoCs. Signed-off-by: NJaedon Shin <jaedon.shin@gmail.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17728/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Jaedon Shin 提交于
Adds power management nodes to BCM7xxx MIPS based SoCs. Signed-off-by: NJaedon Shin <jaedon.shin@gmail.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17727/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
- 05 3月, 2018 1 次提交
-
-
由 James Hogan 提交于
Expand the MIPS Makefile help text to list generic board names, generic defconfigs, and legacy defconfigs which have been converted to generic and are still usable. Here's a snippet of the new "make ARCH=mips help" output: ... If you are targeting a system supported by generic kernels you may configure the kernel for a given architecture target like so: {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards"> Where BOARDS is some subset of the following: boston ni169445 ranchu sead-3 xilfpga Specifically the following generic default configurations are supported: 32r1_defconfig - Build generic kernel for MIPS32 r1 32r1el_defconfig - Build generic kernel for MIPS32 r1 little endian 32r2_defconfig - Build generic kernel for MIPS32 r2 32r2el_defconfig - Build generic kernel for MIPS32 r2 little endian 32r6_defconfig - Build generic kernel for MIPS32 r6 32r6el_defconfig - Build generic kernel for MIPS32 r6 little endian 64r1_defconfig - Build generic kernel for MIPS64 r1 64r1el_defconfig - Build generic kernel for MIPS64 r1 little endian 64r2_defconfig - Build generic kernel for MIPS64 r2 64r2el_defconfig - Build generic kernel for MIPS64 r2 little endian 64r6_defconfig - Build generic kernel for MIPS64 r6 64r6el_defconfig - Build generic kernel for MIPS64 r6 little endian micro32r2_defconfig - Build generic kernel for microMIPS32 r2 micro32r2el_defconfig - Build generic kernel for microMIPS32 r2 little endian The following legacy default configurations have been converted to generic and can still be used: sead3_defconfig - Build 32r2el_defconfig BOARDS=sead-3 sead3micro_defconfig - Build micro32r2el_defconfig BOARDS=sead-3 xilfpga_defconfig - Build 32r2el_defconfig BOARDS=xilfpga ... Signed-off-by: NJames Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Matt Redfearn <matt.redfearn@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kbuild@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18598/
-
- 20 2月, 2018 4 次提交
-
-
由 James Hogan 提交于
Define legacy defconfigs which have been converted to the generic platform more programatically, so that they can be listed in the Makefile help text and as a separate Makefile target without duplication. Signed-off-by: NJames Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Matt Redfearn <matt.redfearn@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kbuild@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18596/
-
由 James Hogan 提交于
Enable the crc32-mips module on MIPS generic r6 configs, where the required MIPS r6 CRC instructions may be available. As well as allowing the CRC instructions to be utilised, this should also ensure the module gets some build coverage. Signed-off-by: NJames Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Marcin Nowakowski <marcin.nowakowski@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18602/
-
由 Marcin Nowakowski 提交于
This module registers crc32 and crc32c algorithms that use the optional CRC32[bhwd] and CRC32C[bhwd] instructions in MIPSr6 cores. Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@mips.com> Signed-off-by: NJames Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-mips@linux-mips.org Cc: linux-crypto@vger.kernel.org Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Patchwork: https://patchwork.linux-mips.org/patch/18601/ [jhogan@kernel.org: Add CRYPTO_ALG_OPTIONAL_KEY flag on Eric Biggers' suggestion, due to commit a208fa8f ("crypto: hash - annotate algorithms taking optional key") in v4.16-rc1]
-
由 Marcin Nowakowski 提交于
Indicate that CRC32 and CRC32C instuctions are supported by the CPU through elf_hwcap flags. This will be used by a follow-up commit that introduces crc32(c) crypto acceleration modules and is required by GENERIC_CPU_AUTOPROBE feature. Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@mips.com> Signed-off-by: NJames Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18600/
-
- 19 2月, 2018 15 次提交
-
-
由 Mathieu Malaterre 提交于
Rewrite the comparison in `else if` statement, case where `min_low_pfn > ARCH_PFN_OFFSET` has already been checked in the first `if` statement: if (min_low_pfn > ARCH_PFN_OFFSET) { Fix non-fatal warning during compilation using W=1: arch/mips/kernel/setup.c: In function ‘bootmem_init’: arch/mips/kernel/setup.c:461:25: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] } else if (min_low_pfn < ARCH_PFN_OFFSET) { ^ Signed-off-by: NMathieu Malaterre <malat@debian.org> Reviewed-by: NJames Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18176/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Mathieu Malaterre 提交于
Fix non-fatal warning during compilation using W=1: arch/mips/kernel/setup.c:158:13: warning: no previous prototype for ‘memory_region_available’ [-Wmissing-prototypes] bool __init memory_region_available(phys_addr_t start, phys_addr_t size) ^~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: NMathieu Malaterre <malat@debian.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18175/ [jhogan@kernel.org: tweak whitespace] Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Mathieu Malaterre 提交于
The unit name was 8c00000 but since the reg property is declared as: reg = <0x0 0x4c00000 0x1 0xfb400000>; the unit name should have been instead 4c00000. Tested on MIPS Creator CI20 (v1): $ cat /sys/firmware/devicetree/.../partitions/partition@4c00000/label;echo system Reported-by: NJames Hogan <jhogan@kernel.org> Signed-off-by: NMathieu Malaterre <malat@debian.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18529/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Mathieu Malaterre 提交于
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: NDavid Daney <ddaney@caviumnetworks.com> Suggested-by: NRob Herring <robh@kernel.org> Signed-off-by: NMathieu Malaterre <malat@debian.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18528/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Arvind Yadav 提交于
gpio_leds are not supposed to change at runtime. struct gpio_led_platform_data contains a const struct gpio_led pointer since v2.6.39, so mark the gpio_led structures const too. Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18008/ [jhogan@kernel.org: improve commit message] Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Arvind Yadav 提交于
gpio_leds are not supposed to change at runtime. struct gpio_led_platform_data contains a const struct gpio_led pointer since v2.6.39, so mark the gpio_led structures const too. Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18007/ [jhogan@kernel.org: improve commit message] Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Arvind Yadav 提交于
gpio_leds are not supposed to change at runtime. struct gpio_led_platform_data contains a const struct gpio_led pointer since v2.6.39, so mark the gpio_led structures const too. Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18006/ [jhogan@kernel.org: improve commit message] Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Pravin Shedge 提交于
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: NPravin Shedge <pravin.shedge4linux@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17920/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Jaedon Shin 提交于
Enable CONFIG_SOC_BRCMSTB in bmips_stb_defconfig. CONFIG_BRCMSTB_PM is also enabled by default option in Kconfig. Signed-off-by: NJaedon Shin <jaedon.shin@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Reviewed-by: NJames Hogan <jhogan@kernel.org> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/18590/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Joe Perches 提交于
Using a period after a newline causes bad output. Fixes: 64b139f9 ("MIPS: OCTEON: irq: add CIB and other fixes") Signed-off-by: NJoe Perches <joe@perches.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17886/Signed-off-by: NJames Hogan <jhogan@kernel.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 Kconfig fixes from Thomas Gleixner: "Three patchlets to correct HIGHMEM64G and CMPXCHG64 dependencies in Kconfig when CPU selections are explicitely set to M586 or M686" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group x86/Kconfig: Add missing i586-class CPUs to the X86_CMPXCHG64 Kconfig group
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates from Thomas Gleixner: "Perf tool updates and kprobe fixes: - perf_mmap overwrite mode fixes/overhaul, prep work to get 'perf top' using it, making it bearable to use it in large core count systems such as Knights Landing/Mill Intel systems (Kan Liang) - s/390 now uses syscall.tbl, just like x86-64 to generate the syscall table id -> string tables used by 'perf trace' (Hendrik Brueckner) - Use strtoull() instead of home grown function (Andy Shevchenko) - Synchronize kernel ABI headers, v4.16-rc1 (Ingo Molnar) - Document missing 'perf data --force' option (Sangwon Hong) - Add perf vendor JSON metrics for ARM Cortex-A53 Processor (William Cohen) - Improve error handling and error propagation of ftrace based kprobes so failures when installing kprobes are not silently ignored and create disfunctional tracepoints" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) kprobes: Propagate error from disarm_kprobe_ftrace() kprobes: Propagate error from arm_kprobe_ftrace() Revert "tools include s390: Grab a copy of arch/s390/include/uapi/asm/unistd.h" perf s390: Rework system call table creation by using syscall.tbl perf s390: Grab a copy of arch/s390/kernel/syscall/syscall.tbl tools/headers: Synchronize kernel ABI headers, v4.16-rc1 perf test: Fix test trace+probe_libc_inet_pton.sh for s390x perf data: Document missing --force option perf tools: Substitute yet another strtoull() perf top: Check the latency of perf_top__mmap_read() perf top: Switch default mode to overwrite mode perf top: Remove lost events checking perf hists browser: Add parameter to disable lost event warning perf top: Add overwrite fall back perf evsel: Expose the perf_missing_features struct perf top: Check per-event overwrite term perf mmap: Discard legacy interface for mmap read perf test: Update mmap read functions for backward-ring-buffer test perf mmap: Introduce perf_mmap__read_event() perf mmap: Introduce perf_mmap__read_done() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq updates from Thomas Gleixner: "A small set of updates mostly for irq chip drivers: - MIPS GIC fix for spurious, masked interrupts - fix for a subtle IPI bug in GICv3 - do not probe GICv3 ITSs that are marked as disabled - multi-MSI support for GICv2m - various small cleanups" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macro irqchip/bcm: Remove hashed address printing irqchip/gic-v2m: Add PCI Multi-MSI support irqchip/gic-v3: Ignore disabled ITS nodes irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq() irqchip/gic-v3: Change pr_debug message to pr_devel irqchip/mips-gic: Avoid spuriously handling masked interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull core fix from Thomas Gleixner: "A small fix which adds the missing for_each_cpu_wrap() stub for the UP case to avoid build failures" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpumask: Make for_each_cpu_wrap() available on UP as well
-
- 18 2月, 2018 1 次提交
-
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: - NVMe pull request from Keith, with fixes all over the map for nvme. From various folks. - Classic polling fix, that avoids a latency issue where we still end up waiting for an interrupt in some cases. From Nitesh Shetty. - Comment typo fix from Minwoo Im. * tag 'for-linus-20180217' of git://git.kernel.dk/linux-block: block: fix a typo in comment of BLK_MQ_POLL_STATS_BKTS nvme-rdma: fix sysfs invoked reset_ctrl error flow nvmet: Change return code of discard command if not supported nvme-pci: Fix timeouts in connecting state nvme-pci: Remap CMB SQ entries on every controller reset nvme: fix the deadlock in nvme_update_formats blk: optimization for classic polling nvme: Don't use a stack buffer for keep-alive command nvme_fc: cleanup io completion nvme_fc: correct abort race condition on resets nvme: Fix discard buffer overrun nvme: delete NVME_CTRL_LIVE --> NVME_CTRL_CONNECTING transition nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING
-