提交 64b139f9 编写于 作者: D David Daney 提交者: Ralf Baechle

MIPS: OCTEON: irq: add CIB and other fixes

- Use of_irq_init() to initialize interrupt controllers
- Get rid of some unlikely()
- Add CIB to support SATA and other interrupts
- Add support for CIU SUM2 interrupt sources
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NLeonid Rosenboim <lrosenboim@caviumnetworks.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Signed-off-by: NPeter Swain <peter.swain@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8947/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 2e3ecab1
* Cavium Interrupt Bus widget
Properties:
- compatible: "cavium,octeon-7130-cib"
Compatibility with cn70XX SoCs.
- interrupt-controller: This is an interrupt controller.
- reg: Two elements consisting of the addresses of the RAW and EN
registers of the CIB block
- cavium,max-bits: The index (zero based) of the highest numbered bit
in the CIB block.
- interrupt-parent: Always the CIU on the SoC.
- interrupts: The CIU line to which the CIB block is connected.
- #interrupt-cells: Must be <2>. The first cell is the bit within the
CIB. The second cell specifies the triggering semantics of the
line.
Example:
interrupt-controller@107000000e000 {
compatible = "cavium,octeon-7130-cib";
reg = <0x10700 0x0000e000 0x0 0x8>, /* RAW */
<0x10700 0x0000e100 0x0 0x8>; /* EN */
cavium,max-bits = <23>;
interrupt-controller;
interrupt-parent = <&ciu>;
interrupts = <1 24>;
/* Interrupts are specified by two parts:
* 1) Bit number in the CIB* registers
* 2) Triggering (1 - edge rising
* 2 - edge falling
* 4 - level active high
* 8 - level active low)
*/
#interrupt-cells = <2>;
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册