- 09 1月, 2014 2 次提交
-
-
由 Andrzej Hajda 提交于
The patch adds header file defining clock IDs. This allows to use macros instead of magic numbers in DT bindings. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NMike Turquette <mturquette@linaro.org> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Andrew Bresticker 提交于
Register the APLL rate table so that we can set the APLL rate from the cpufreq driver. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
- 31 12月, 2013 16 次提交
-
-
由 Sachin Kamat 提交于
Add CLK_SET_RATE_PARENT flag to mout_apll clock. This will let us set the clock rate in the cpufreq driver. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NMike Turquette <mturquette@linaro.org> Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Tomasz Figa 提交于
This patch adds mout_aclk333_sub mux clock and updates gate clocks from MFC domain to have it as their parent as specified in SoC documentation. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-by: NTomasz Figa <t.figa@samsung.com>
-
由 Tomasz Figa 提交于
According to SoC documentation, input 5 of mout_audio muxes is connected to xxti (named fin_pll in the driver). This patch corrects defined parent arrays to match SoC documentation. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-by: NTomasz Figa <t.figa@samsung.com>
-
由 Tomasz Figa 提交于
This patch updates mux parent arrays with unpopulated mux inputs, as all inputs need to be specified in parent arrays passed to clk_register_mux(), otherwise clk_set_parent() can generate out of bound accesses to the array. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-by: NTomasz Figa <t.figa@samsung.com>
-
由 Tomasz Figa 提交于
This patch adds mux_aclk_200_disp1_sub mux clock, which according to SoC documentation is the correct parent of DISP1 gate clocks. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-by: NTomasz Figa <t.figa@samsung.com>
-
由 Tomasz Figa 提交于
This patch adds mout_aclk266_gscl_sub mux clock and adjusts definitions of GSCL domain gate clocks to use it as their parent, as specified in SoC documentation. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-by: NTomasz Figa <t.figa@samsung.com>
-
由 Tomasz Figa 提交于
This patch renames all mux clocks to start with mout_ prefix and all div clocks to start with div_ prefix for consistency with other clocks already defined this way. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-by: NTomasz Figa <t.figa@samsung.com>
-
由 Tomasz Figa 提交于
This patch reorders clock definitions, so they are sorted by register addresses and bitfield shifts. When at it, blank lines are added to separate definitions of clocks from different registers. Overall this should make the driver more readable and reduce the number of potential conflicts when adding new entries. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-by: NTomasz Figa <t.figa@samsung.com>
-
由 Tomasz Figa 提交于
-
由 Krzysztof Kozlowski 提交于
Move reg_save[] into CONFIG_PM_SLEEP dependency block as it is used only by suspend and resume functions. This fixes the warning on CONFIG_PM_SLEEP=n: drivers/clk/samsung/clk-exynos-audss.c:29:22: warning: ‘reg_save’ defined but not used [-Wunused-variable] Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NMike Turquette <mturquette@linaro.org> Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Abhilash Kesavan 提交于
The sysreg (system register) generates control signals for various blocks like disp1blk, i2c, mipi, usb etc. However, it gets disabled as an unused clock at boot-up. This can lead to failures in operation of above blocks, because they can not be configured properly if this clock is disabled. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Acked-by: NMike Turquette <mturquette@linaro.org> [t.figa: Updated patch description.] Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Abhilash Kesavan 提交于
Due to incorrect clock specified in MDMA0 node, using MDMA0 controller could cause system failures, due to wrong clock being controlled. This patch fixes this by specifying correct clock. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Acked-by: NMike Turquette <mturquette@linaro.org> [t.figa: Corrected commit message and description.] Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Abhilash Kesavan 提交于
Adds gate clock for MDMA0 on Exynos5250 SoC. This is needed to ensure that the clock is enabled when MDMA0 is used on systems on which firmware gates the clockby default. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Acked-by: NMike Turquette <mturquette@linaro.org> [t.figa: Updated patch description.] Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Abhilash Kesavan 提交于
The CLK_GATE_IP_ACP register offset is incorrectly listed making definition of g2d clock incorrect, which may lead to system failures when trying to use G2D on systems on which firmware gates this clock by default. Fix this and the register ordering as well. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Acked-by: NMike Turquette <mturquette@linaro.org> [t.figa: Updated patch description.] Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Andrew Bresticker 提交于
The gate clocks for the MFC sysmmus appear to be flipped, i.e. GATE_IP_MFC[2] gates sysmmu_mfcl and GATE_IP_MFC[1] gates sysmmu_mfcr. Fix this so that the MFC will start up. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NMike Turquette <mturquette@linaro.org> Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
由 Seung-Woo Kim 提交于
The SRC_MFC register offset was incorrect, which could cause have caused wrong calculation of rate of sclk_mfc clock, that could in turn lead to incorrect operation of MFC. This patch corrects it. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Acked-by: NMike Turquette <mturquette@linaro.org> [t.figa: Updated patch description] Signed-off-by: NTomasz Figa <t.figa@samsung.com>
-
- 28 12月, 2013 1 次提交
-
-
由 Mike Turquette 提交于
Populate ${DEBUGS_MOUNT_POINT}/clk if CONFIG_DEBUG_FS is set. This eliminates the extra (annoying) step of enabling the config option manually. Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
- 27 12月, 2013 1 次提交
-
-
由 Sachin Kamat 提交于
'break' after 'goto' is redundant. Remove it. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
- 23 12月, 2013 4 次提交
-
-
由 Boris BREZILLON 提交于
This patch adds support for accuracy retrieval on fixed clocks. It also adds a new dt property called 'clock-accuracy' to define the clock accuracy. This can be usefull for oscillator (RC, crystal, ...) definitions which are always given an accuracy characteristic. Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Boris BREZILLON 提交于
The clock accuracy is expressed in ppb (parts per billion) and represents the possible clock drift. Say you have a clock (e.g. an oscillator) which provides a fixed clock of 20MHz with an accuracy of +- 20Hz. This accuracy expressed in ppb is 20Hz/20MHz = 1000 ppb (or 1 ppm). Clock users may need the clock accuracy information in order to choose the best clock (the one with the best accuracy) across several available clocks. This patch adds clk accuracy retrieval support for common clk framework by means of a new function called clk_get_accuracy. This function returns the given clock accuracy expressed in ppb. In order to get the clock accuracy, this implementation adds one callback called recalc_accuracy to the clk_ops structure. This callback is given the parent clock accuracy (if the clock is not a root clock) and should recalculate the given clock accuracy. This callback is optional and may be implemented if the clock is not a perfect clock (accuracy != 0 ppb). Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Sachin Kamat 提交于
'clk_si570_of_match' is always compiled in. Hence the helper macro is not needed. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Mike Turquette 提交于
Merge tag 'renesas-clock-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into clk-next-shmobile2 Renesas ARM based SoC Clock updates for v3.14 Add support for using emev2 SMU clocks with DT
-
- 21 12月, 2013 2 次提交
-
-
git://git.infradead.org/linux-mvebu由 Mike Turquette 提交于
mvebu clock changes for v3.14 - mvebu: add the core divider clock driver - sparse cleanup
-
git://git.xilinx.com/linux-xlnx由 Mike Turquette 提交于
arm: Xilinx Zynq clk patches for v3.14 - Add support for fclk-enable feature
-
- 20 12月, 2013 9 次提交
-
-
由 Soren Brinkmann 提交于
In some use cases Zynq's FPGA clocks are used as static clock generators for IP in the FPGA part of the SOC for which no Linux driver exists and would control those clocks. To avoid automatic gating of these clocks in such cases a new property - fclk-enable - is added to the clock controller's DT description to accomodate such use cases. It's value is a bitmask, where a set bit results in enabling the corresponding FCLK through the clkc. FPGA clocks are handled following the rules below: If an FCLK is not enabled by bootloaders, that FCLK will be disabled in Linux. Drivers can enable and control it through the CCF as usual. If an FCLK is enabled by bootloaders AND the corresponding bit in the 'fclk-enable' DT property is set, that FCLK will be enabled by the clkc, resulting in an off by one reference count for that clock. Ensuring it will always be running. Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Sachin Kamat 提交于
Extra semicolon is redundant. Remove it. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Sachin Kamat 提交于
'vtwm_pll_ops' is local to this file. Make it static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Sachin Kamat 提交于
'of_cpu_clk_setup' is used only in this file. Make it static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Sachin Kamat 提交于
clk_sp810_timerclken_of_get is used only in this file. Make it static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Sachin Kamat 提交于
'div_reg' is a pointer. Assign NULL instead of 0. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NDinh Nguyen <dinguyen@altera.com> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Sachin Kamat 提交于
tegra_clk_periph_nodiv_ops is used only in this file. Make it static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Sachin Kamat 提交于
Local variables used only in this file are made static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Sachin Kamat 提交于
clk_frac_ops is local to this file. Make it static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
- 15 12月, 2013 2 次提交
-
-
由 Soren Brinkmann 提交于
Add a driver for SILabs 570, 571, 598, 599 programmable oscillators. The devices generate low-jitter clock signals and are reprogrammable via an I2C interface. Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Stephen Boyd 提交于
Adding clocks from a kernel module can cause a NULL pointer dereference if the parent of a clock is added after the clock is added. This happens because __clk_init() iterates over the list of orphans and reparents the orphans to the clock being registered before creating the debugfs entry for the clock. Create the debugfs entry first before reparenting the orphans. Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = ef3e4000 [00000028] *pgd=bf810831 Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: mmcc_8960(+) CPU: 0 PID: 52 Comm: modprobe Not tainted 3.12.0-rc2-00023-g1021a28-dirty #659 task: ef319200 ti: ef3a6000 task.ti: ef3a6000 PC is at lock_rename+0x24/0xc4 LR is at debugfs_rename+0x34/0x208 pc : [<c0317238>] lr : [<c047dfe4>] psr: 00000013 sp : ef3a7b88 ip : ef3a7ba8 fp : ef3a7ba4 r10: ef3d51cc r9 : ef3bc680 r8 : ef3d5210 r7 : ef3bc640 r6 : eee287e0 r5 : eee287e0 r4 : 00000000 r3 : ef3bc640 r2 : 00000000 r1 : eee287e0 r0 : 00000000 Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5787d Table: af3e406a DAC: 00000015 Process modprobe (pid: 52, stack limit = 0xef3a6240) Stack: (0xef3a7b88 to 0xef3a8000) 7b80: ef3bc640 ee4047e0 00000000 eee287e0 ef3a7bec ef3a7ba8 7ba0: c047dfe4 c0317220 ef3bc680 ef3d51cc ef3a7bdc ef3a7bc0 c06e29d0 c0268784 7bc0: c08946e8 ef3d5210 00000000 ef3bc700 ef3d5290 ef3d5210 ef3bc680 ef3d51cc 7be0: ef3a7c0c ef3a7bf0 c05b9e9c c047dfbc 00000000 00000000 ef3d5210 ef3d5290 7c00: ef3a7c24 ef3a7c10 c05baebc c05b9e30 00000001 00000001 ef3a7c64 ef3a7c28 7c20: c05bb124 c05bae9c bf000cd8 ef3bc7c0 000000d0 c0ff129c bf001774 00000002 7c40: ef3bc740 ef3d5290 ef0f9a10 bf001774 bf00042c 00000061 ef3a7c8c ef3a7c68 7c60: c05bb480 c05baed8 bf001774 ef3d5290 ef0f9a10 bf001774 ef38bc10 ef0f9a00 7c80: ef3a7cac ef3a7c90 c05bb5a8 c05bb3a0 bf001774 00000062 ef0f9a10 ef38bc18 7ca0: ef3a7cec ef3a7cb0 bf00010c c05bb56c 00000000 ef38ba00 00000000 ef3d60d0 7cc0: ef3a7cdc c0fefc24 ef0f9a10 c0a091c0 bf000d24 00000000 bf0029f0 bf006000 7ce0: ef3a7cfc ef3a7cf0 c05156c0 bf000040 ef3a7d2c ef3a7d00 c0513f5c c05156a8 7d00: ef3a7d2c ef0f9a10 ef0f9a10 bf000d24 ef0f9a44 c09ca588 00000000 bf006000 7d20: ef3a7d4c ef3a7d30 c05142b8 c0513ecc ef0fd25c 00000000 bf000d24 c0514214 7d40: ef3a7d74 ef3a7d50 c0512030 c0514220 ef0050a8 ef0fd250 ef0050f8 bf000d24 7d60: ef37c100 c09ed150 ef3a7d84 ef3a7d78 c05139c8 c0511fd8 ef3a7 7d80: c051344c c05139a8 bf000864 c09ca588 ef3a7db4 bf000d24 bf002 7da0: c09ca588 00000000 ef3a7dcc ef3a7db8 c05149dc c0513360 ef3a7 7dc0: ef3a7ddc ef3a7dd0 c0515914 c0514960 ef3a7dec ef3a7de0 bf006 7de0: ef3a7e74 ef3a7df0 c0208800 bf00600c ef3a7e1c ef3a7e00 c04c5 7e00: ffffffff c09d46c4 00000000 bf0029a8 ef3a7e34 ef3a7e20 c024c 7e20: ffffffff c09d46c4 ef3a7e5c ef3a7e38 c024e2fc c024ce40 00000 7e40: ef3a7f48 bf0029b4 bf0029a8 271aeb1c ef3a7f48 bf0029a8 00000001 ef383c00 7e60: bf0029f0 00000001 ef3a7f3c ef3a7e78 c028fac4 c0208718 bf0029b4 00007fff 7e80: c028cd58 000000d2 f0065000 00000000 ef3a7ebc 00000000 00000000 bf0029b4 7ea0: 00000000 bf0029ac bf0029b4 ef3a6000 ef3a7efc c08bf128 00000000 00000000 7ec0: 00000000 00000000 00000000 00000000 6e72656b 00006c65 00000000 00000000 7ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7f00: 00000000 00000000 00000000 271aeb1c ef3a7f2c 00016376 b6f38008 001d3774 7f20: 00000080 c020f968 ef3a6000 00000000 ef3a7fa4 ef3a7f40 c02904dc c028e178 7f40: c020f898 010ccfa8 f0065000 00016376 f0073f60 f0073d7d f007a1e8 00002b24 7f60: 000039e4 00000000 00000000 00000000 0000002f 00000030 00000019 00000016 7f80: 00000012 00000000 00000000 010de1b2 b6f38008 010ccfa8 00000000 ef3a7fa8 7fa0: c020f6c0 c0290434 010de1b2 b6f38008 b6f38008 00016376 001d3774 00000000 7fc0: 010de1b2 b6f38008 010ccfa8 00000080 010de1b2 bedb6f90 010de1c9 0001d8dc 7fe0: 0000000c bedb674c 0001ce30 000094c4 60000010 b6f38008 00000008 0000001d [<c0317238>] (lock_rename+0x24/0xc4) from [<c047dfe4>] (debugfs_rename+0x34/0x208) [<c047dfe4>] (debugfs_rename+0x34/0x208) from [<c05b9e9c>] (clk_debug_reparent+0x78/0xc0) [<c05baebc>] (__clk_reparent+0x2c/0x3c) from [<c05bb124>] (__clk_init+0x258/0x4c8) [<c05bb124>] (__clk_init+0x258/0x4c8) from [<c05bb480>] (_clk_register+0xec/0x1cc) [<c05bb480>] (_clk_register+0xec/0x1cc) from [<c05bb5a8>] (devm_clk_register+0x48/0x7c) [<c05bb5a8>] (devm_clk_register+0x48/0x7c) from [<bf00010c>] (msm_mmcc_8960_probe+0xd8/0x190 [mmcc_8960]) [<bf00010c>] (msm_mmcc_8960_probe+0xd8/0x190 [mmcc_8960]) from [<c05156c0>] (platform_drv_probe+0x24/0x28) [<c05156c0>] (platform_drv_probe+0x24/0x28) from [<c0513f5c>] (driver_probe_device+0x9c/0x354) [<c0513f5c>] (driver_probe_device+0x9c/0x354) from [<c05142b8>] (__driver_attach+0xa4/0xa8) [<c05142b8>] (__driver_attach+0xa4/0xa8) from [<c0512030>] (bus_for_each_dev+0x64/0x98) [<c0512030>] (bus_for_each_dev+0x64/0x98) from [<c05139c8>] (driver_attach+0x2c/0x30) [<c05139c8>] (driver_attach+0x2c/0x30) from [<c051344c>] (bus_add_driver+0xf8/0x2a8) [<c051344c>] (bus_add_driver+0xf8/0x2a8) from [<c05149dc>] (driver_register+0x88/0x104) [<c05149dc>] (driver_register+0x88/0x104) from [<c0515914>] (__platform_driver_register+0x58/0x6c) [<c0515914>] (__platform_driver_register+0x58/0x6c) from [<bf006018>] (msm_mmcc_8960_driver_init+0x18/0x24 [mmcc_8960]) [<bf006018>] (msm_mmcc_8960_driver_init+0x18/0x24 [mmcc_8960]) from [<c0208800>] (do_one_initcall+0xf4/0x1b8) [<c0208800>] (do_one_initcall+0xf4/0x1b8) from [<c028fac4>] (load_module+0x1958/0x22bc) [<c028fac4>] (load_module+0x1958/0x22bc) from [<c02904dc>] (SyS_init_module+0xb4/0x120) [<c02904dc>] (SyS_init_module+0xb4/0x120) from [<c020f6c0>] (ret_fast_syscall+0x0/0x48) Code: e1500001 e1a04000 e1a05001 0a000021 (e5903028) Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
- 14 12月, 2013 1 次提交
-
-
由 Takashi Yoshii 提交于
Device tree clock binding document for EMMA Mobile EV2 SMU, And Common clock framework based implementation of it. Following nodes are defined to describe clock tree. - renesas,emev2-smu - renesas,emev2-smu-clkdiv - renesas,emev2-smu-gclk These bindings are designed manually based on 19UH0037EJ1000_SMU : System Management Unit User's Manual So far, reparent is not implemented, and is fixed to index #0. Clock tree description is not included, and should be provided by device-tree. Signed-off-by: NTakashi Yoshii <takasi-y@ops.dti.ne.jp> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 13 12月, 2013 2 次提交
-
-
由 Ulf Hansson 提交于
Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Mike Turquette 提交于
Merge tag 'clk-hisilicon' of git://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux into clk-next-hisilicon
-