Struct v4l2_subdev_edid and the VIDIOC_SUBDEV_G/S_EDID ioctls were
specific for subdevices, but for hardware with a simple video pipeline
you do not need/want to create subdevice nodes to just get/set the EDID.

Move the v4l2_subdev_edid struct to v4l2-common.h and rename as
v4l2_edid. Add the same ioctls to videodev2.h as well, thus allowing
this API to be used with both video nodes and v4l-subdev nodes.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Some devices do not produce timestamps that correspond to the end of the
frame. The user space should be informed on the matter. This patch achieves
that by adding buffer flags (and a mask) for timestamp sources since more
possible timestamping points are expected than just two.

A three-bit mask is defined (V4L2_BUF_FLAG_TSTAMP_SRC_MASK) and two of the
eight possible values is are defined V4L2_BUF_FLAG_TSTAMP_SRC_EOF for end of
frame (value zero) V4L2_BUF_FLAG_TSTAMP_SRC_SOE for start of exposure (next
value).
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NKamil Debski <k.debski@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The buffer flags field is 32 bits but the defined only used 16. This is
fine, but as more than 16 bits will be used in the very near future, define
them as 32-bit numbers for consistency.
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

VIDIOC_QUERYCAP IOCTL is used to query device capabilities. Add new
capability flag to inform given device supports SDR capture.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Acked-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add new V4L2 stream format definition, V4L2_BUF_TYPE_SDR_CAPTURE,
for SDR receiver.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add V4L2_TUNER_CAP_1HZ for 1 Hz resolution.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Define tuner types V4L2_TUNER_ADC and V4L2_TUNER_RF for SDR usage.

ADC is used for setting sampling rate (sampling frequency) to SDR
device.

Another tuner type, named as V4L2_TUNER_RF, is possible RF tuner.
Is is used to down-convert RF frequency to range ADC could sample.
Having RF tuner is optional, whilst in practice it is almost always
there.

Also add checks to VIDIOC_G_FREQUENCY, VIDIOC_S_FREQUENCY and
VIDIOC_ENUM_FREQ_BANDS only allow these two tuner types when device
type is SDR (VFL_TYPE_SDR). For VIDIOC_G_FREQUENCY we do not check
tuner type, instead override type with V4L2_TUNER_ADC in every
case (requested by Hans in order to keep functionality in line with
existing tuners and existing API does not specify it).

Prohibit VIDIOC_S_HW_FREQ_SEEK explicitly when device type is SDR,
as device cannot do hardware seek without a hardware demodulator.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

As discussed on the media summit 2013, there is no reason for the width
and height to be signed.

Therefore this patch is an attempt to convert those fields from __s32 to
__u32.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi> (documentation and smiapp)
Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

It is very common to have to calculate the total width and height of the
blanking and the full frame, so add a few defines that deal with that.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

NV16M and NV61M are planar YCbCr 4:2:2 and YCrCb 4:2:2 formats with a
luma plane followed by an interleaved chroma plane. The planes are not
required to be contiguous in memory, and the formats can only be used
with the multi-planar formats API.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This has been replaced by the new and much better VIDIOC_DBG_G_CHIP_INFO.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch fixes several typos in videodev2.h file
Signed-off-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NIsmael Luceno <ismael.luceno@corp.bluecherry.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Those aren't used anywhere for a long time. Drop it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This was set to 1 << 0 which is the same as V4L2_DV_FL_REDUCED_BLANKING.
It should be 1 << 3 instead. Luckily interlaced formats are rarely used,
which is why this bug wasn't seen until now.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Increase the size of the 'reserved' array to give more room for future
extensions.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This ioctl will be extended to return more information than just the name.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

After using the new VIDIOC_DBG_G_CHIP_NAME ioctl I realized that the matching
by name possibility is useless. Just drop it and rename MATCH_SUBDEV_IDX to
just MATCH_SUBDEV.
The v4l2-dbg utility is much better placed to match by name by just enumerating
all bridge and subdev devices until chip_name.name matches.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Simplify the debugging ioctls by creating the VIDIOC_DBG_G_CHIP_NAME ioctl.
This will eventually replace VIDIOC_DBG_G_CHIP_IDENT. Chip matching is done
by the name or index of subdevices or an index to a bridge chip. Most of this
can all be done automatically, so most drivers just need to provide get/set
register ops.
In particular, it is now possible to get/set subdev registers without
requiring assistance of the bridge driver.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This API is now obsolete and can be removed.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Define video buffer flag for the COPY timestamp. In this case the timestamp
value is copied from the OUTPUT to the corresponding CAPTURE buffer.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When the control IDs were split off from videodev2.h to v4l2-controls.h
these new Digital Video controls were forgotten (the two patches may
have crossed one another).
Move these controls to their proper place in v4l2-controls.h.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds a helper function that allows to modify range,
i.e. minimum, maximum, step and default value of a v4l2 control,
after the control has been created and initialized. This is helpful
in situations when range of a control depends on user configurable
parameters, e.g. camera sensor absolute exposure time depending on
an output image resolution and frame rate.
v4l2_ctrl_modify_range() function allows to modify range of an
INTEGER, BOOL, MENU, INTEGER_MENU and BITMASK type controls.
Based on a patch from Hans Verkuil http://patchwork.linuxtv.org/patch/8654.
Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Define video buffer flags for different timestamp types. Everything up to
now have used either realtime clock or monotonic clock, without a way to
tell which clock the timestamp was taken from.
Also document that the clock source of the timestamp in the timestamp field
depends on buffer flags.

[mchehab@redhat.com: fix a few wrong references to Kernel 3.8 - as this patch
 is meant for 3.9]
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

add new macro V4L2_PIX_FMT_SGRBG10ALAW8 and associated formats
to represent Bayer format frames compressed by A-LAW algorithm,
add V4L2_PIX_FMT_UV8 to represent storage of CbCr data (UV interleaved)
only.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds extension to V4L2 api. A new ioctl VIDIOC_EXPBUF is added.  The
ioctl is used to export an mmap buffer as a DMABUF file descriptor.
Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Adds DMABUF memory type to v4l framework. Also adds the related file
descriptor in v4l2_plane and v4l2_buffer.
   [original work in the PoC for buffer sharing]
Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: NSumit Semwal <sumit.semwal@ti.com>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Judging from what drivers do and from my experience temeperframe
fraction is set in seconds - look e.g. here
    static int bttv_g_parm(struct file *file, void *f,
                                    struct v4l2_streamparm *parm)
    {
            struct bttv_fh *fh = f;
            struct bttv *btv = fh->btv;
            v4l2_video_std_frame_period(bttv_tvnorms[btv->tvnorm].v4l2_id,
                                        &parm->parm.capture.timeperframe);
    ...
    void v4l2_video_std_frame_period(int id, struct v4l2_fract *frameperiod)
    {
            if (id & V4L2_STD_525_60) {
                    frameperiod->numerator = 1001;
                    frameperiod->denominator = 30000;
            } else {
                    frameperiod->numerator = 1;
                    frameperiod->denominator = 25;
            }
and also v4l2-ctl in userspace decodes this as seconds:
    if (doioctl(fd, VIDIOC_G_PARM, &parm, "VIDIOC_G_PARM") == 0) {
            const struct v4l2_fract &tf = parm.parm.capture.timeperframe;
            ...
            printf("\tFrames per second: %.3f (%d/%d)\n",
                            (1.0 * tf.denominator) / tf.numerator,
                            tf.denominator, tf.numerator);
The typo was there from day 1 - added in 2002 in e028b61b ([PATCH]
add v4l2 api)(*)
(*) found in history tree
    git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.gitSigned-off-by: NKirill Smelkov <kirr@mns.spb.ru>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

Add the following new fourcc definitions, for multiplanar YCbCr:
V4L2_PIX_FMT_NV21M, V4L2_PIX_FMT_NV12MT_16X16 and compressed formats:
V4L2_PIX_FMT_H264_MVC, V4L2_PIX_FMT_VP8.
Signed-off-by: NJeongtae Park <jtp.park@samsung.com>
Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds definition of the Samsung S5C73M3 camera specific
image format. V4L2_PIX_FMT_S5C_UYVY_JPG is a two-planar format,
the  first plane contains interleaved UYVY and JPEG data followed
by meta-data. The second plane contains additional meta-data needed
for extracting JPEG and UYVY data stream from the first plane.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The 'custom' timings are no longer just for custom timings, but also for standard
CEA/VESA timings. So rename to V4L2_IN/OUT_CAP_DV_TIMINGS.
The old define is still kept for backwards compatibility.
This decision was taken during the 2012 Media Workshop.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This buffer type isn't used at all, and since it is effectively undefined
what it should do it is deprecated. The define still exists, but any
internal support for such buffers is removed.
The decisions to deprecate this was taken during the 2012 Media Workshop.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

During the 2012 Media Workshop it was decided to split off the control
definitions into their own v4l2-controls.h header, included by videodev2.h.
Because controls make up such a large part of V4L2 they made it hard
to read videodev2.h. Splitting off the control definitions makes life
easier.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds new 'YM21' fourcc definition for multiplanar YCrCb
pixel format - V4L2_PIX_FMT_YVU420M.
Signed-off-by: NShaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These new controls and two new ioctls make it possible to properly support
VGA, DVI-A/D/I, HDMI and DisplayPort connectors. All these controls and the
ioctls are all at the sub-device level. They are meant for V4L2 bridge/platform
drivers or to be accessed on embedded systems through /dev/v4l-subdev* device
nodes.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

To allow apps to limit a hw-freq-seek to a specific band, for further
info see the documentation this patch adds for these new fields.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add a new ioctl to enumerate the supported frequency bands of a tuner.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds new V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE
capability flags that are intended to be used for memory-to-memory (M2M)
devices, instead of ORed V4L2_CAP_VIDEO_CAPTURE and V4L2_CAP_VIDEO_OUTPUT.

V4L2_CAP_VIDEO_M2M flag is added at the drivers, CAPTURE and OUTPUT
capability flags are left untouched and will be removed in future,
after a transition period required for existing applications to be
adapted to check only for V4L2_CAP_VIDEO_M2M.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Acked-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Unify flags on the selection interfaces on V4L2 and V4L2 subdev. Flags are
very similar to targets in this case: there are more similarities than
differences between the two interfaces.
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>