->hold is write-only now, remove it.

v2:
* v1 missed bast-ide, palm_bk3710, ide-cs and delkin_cb host drivers.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

hdparm explicitely marks HDIO_[UNREGISTER,SCAN]_HWIF ioctls as DANGEROUS
and given the number of bugs we can assume that there are no real users:

* DMA has no chance of working because DMA resources are released by
  ide_unregister() and they are never allocated again.

* Since ide_init_hwif_ports() is used for ->io_ports[] setup the ioctls
  don't work for almost all hosts with "non-standard" (== non ISA-like)
  layout of IDE taskfile registers (there is a lot of such host drivers).

* ide_port_init_devices() is not called when probing IDE devices so:
  - drive->autotune is never set and IDE host/devices are not programmed
    for the correct PIO/DMA transfer modes (=> possible data corruption)
  - host specific I/O 32-bit and IRQ unmasking settings are not applied
    (=> possible data corruption)
  - host specific ->port_init_devs method is not called (=> no luck with
    ht6560b, qd65xx and opti621 host drivers)

* ->rw_disk method is not preserved (=> no HPT3xxN chipsets support).

* ->serialized flag is not preserved (=> possible data corruption when
   using icside, aec62xx (ATP850UF chipset), cmd640, cs5530, hpt366
   (HPT3xxN chipsets), rz1000, sc1200, dtc2278 and ht6560b host drivers).

* ->ack_intr method is not preserved (=> needed by ide-cris, buddha,
  gayle and macide host drivers).

* ->sata_scr[] and sata_misc[] is cleared by ide_unregister() and it
  isn't initialized again (SiI3112 support needs them).

* To issue an ioctl() there need to be at least one IDE device present
  in the system.

* ->cable_detect method is not preserved + it is not called when probing
  IDE devices so cable detection is broken (however since DMA support is
  also broken it doesn't really matter ;-).

* Some objects which may have already been freed in ide_unregister()
  are restored by ide_hwif_restore() (i.e. ->hwgroup).

* ide_register_hw() may unregister unrelated IDE ports if free ide_hwifs[]
  slot cannot be found.

* When IDE host drivers are modular unregistered port may be re-used by
  different host driver that owned it first causing subtle bugs.

Since we now have a proper warm-plug support remove these ioctls,
then remove no longer needed:
- ide_register_hw() and ide_hwif_restore() functions
- 'init_default' and 'restore' arguments of ide_unregister()
- zeroeing of hwif->{dma,extra}_* fields in ide_unregister()

As an added bonus IDE core code size shrinks by ~3kB (x86-32).

v2:
* fix ide_unregister() arguments in cleanup_module() (Andrew Morton).

v3:
* fix ide_unregister() arguments in palm_bk3710.c.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters
  and update Documentation/ide/ide.txt.

* Remove no longer needed ide_forced chipset type.

v2:
* is_chipset_set[] -> is_chipset_set in ide.c.

* Documentation/ide/ide.txt fix.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove CONFIG_BLK_DEV_HD hack from init_hwif_default()
  ("hda=noprobe hdb=noprobe" kernel parameters should be used
  instead if somebody wishes to use the old "hd" driver).

* Make CONFIG_BLK_DEV_HD_ONLY config option available also when
  IDE subsystem is used and update help entry.

* Remove no longer needed CONFIG_BLK_DEV_HD_IDE config option.

v2:
* Update documentation to suggest "hda=noprobe hdb=noprobe"
  instead of obsoleted "ide0=noprobe".

* Update Documentation/ide/ide.txt.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

request_irq() will fail if there is already another IRQ handler
registered and IRQ flags are mismatched.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ide_generic_sysfs_init() helper registering 'ide_generic' class
  (together with ide_generic_class_release() ->class_release method)
  and use it in ide_generic_init().

* Add "add" class attribute to 'ide_generic' class for adding new interfaces
  (it is intended to be a replacement for obsoleted "idex=base[,ctl[,irq]]"
  kernel parameters).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add 'struct class ide_port_class' ('ide_port' class) and a 'struct
  device *portdev' ('ide_port' class device) in ide_hwif_t.

* Register 'ide_port' class in ide_init() and unregister it in
  cleanup_module().

* Create ->portdev in ide_register_port () and unregister it in
  ide_unregister().

* Add "delete_devices" class device attribute for unregistering IDE devices
  on a port and "scan" one for probing+registering IDE devices on a port.

* Add ide_sysfs_register_port() helper for registering "delete_devices"
  and "scan" attributes with ->portdev.  Call it in ide_device_add_all().

* Document IDE warm-plug support in Documentation/ide/warm-plug-howto.txt.

v2:
* Convert patch from using 'struct class_device' to use 'struct device'.
  (thanks to Kay Sievers for doing it)
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

->busproc method is used by HDIO_SET_BUSSTATE ioctl but it has no chance
of working as intended (in 2.4.x days) because to issue an ioctl there
is a device node needed and:

- for BUSSTATE_TRISTATE+OFF it is too late (devices are already gone)

- for BUSSTATE_TRISTATE+ON it is too early (devices are not registered yet)

Just remove ->busproc method for now (it was only implemented by hpt366,
siimage and tc86c001 host drivers).

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Rework PowerMac media-bay support in such way that instead of
un/registering the IDE interface we un/register IDE devices:

* Add ide_port_scan() helper for probing+registerering devices on a port.

* Rename ide_port_unregister_devices() to __ide_port_unregister_devices().

* Add ide_port_unregister_devices() helper for unregistering devices on a port.

* Add 'ide_hwif_t *cd_port' to 'struct media_bay_info', pass 'hwif' instead
  of hwif->index to media_bay_set_ide_infos() and use it to setup 'cd_port'.

* Use ide_port_unregister_devices() instead of ide_unregister()
  and ide_port_scan() instead of ide_register_hw() in media_bay_step().

* Unexport ide_register_hw() and make it static.

v2:
* Fix build by adding <linux/ide.h> include to <asm-powerpc/mediabay.h>.
  (Reported by Michael/Kamalesh/Andrew).

Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ide_cfg_mtx lock/unlock to ide_port_setup_devices() and then move
ide_port_setup_devices() call from init_irq() to ide_device_add_all().
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Factor out devices init from ide_init_port_data() to
  ide_port_init_devices_data().

While at it:

* Add explicit clearing of IDE device structure.

There should be no functionality changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Factor out code unregistering devices from ide_unregister() to
ide_port_unregister_devices().
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

IDE devices need to be removed from /proc/ide/ _before_ being unregistered:

* Drop 'ide_hwif_t *hwif' argument from destroy_proc_ide_device()
  and use drive->hwif instead.

* Rename destroy_proc_ide_device() to ide_proc_unregister_device().

* Call ide_proc_unregister_device() in drive_release_dev().

* Remove no longer needed destroy_proc_ide_drives().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Factor out cable detection from ide_init_port() to ide_port_cable_detect().

* Move ide_port_cable_detect() call to ide_device_add_all().
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functionality changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use ide_find_port() instead of ide_deprecated_find_port() in bast-ide/
  palm_bk3710/ide-cs/delkin_cb host drivers and in ide_register_hw().

* Remove no longer needed ide_deprecated_find_port().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Instead of checking for '->io_ports[IDE_DATA_OFFSET] == 0' check for
  '->chipset == ide_unknown' when looking for an empty ide_hwifs[] slot.

* Do ide-pnp initialization after ide-generic when IDE is built-in
  (ide-pnp is the only user of ide_find_port() which needs such fixup).
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This hwif->chipset fixup is already present in ide_device_add_all()
but for warm-plug support we also need to reserve not currently present
interfaces.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This option is obsolete and can be removed safely.

It allows us to remove the pci_get_device_reverse() function from the
PCI core.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Describe noraid parameter with its name (and not its value).
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The header files for the Pb1200/DBAu1200 boards have wrong definition for the
IDE interface's decoded range length -- it should be 512 bytes according to
what the IDE driver does.  In addition, the IDE platform device claims 1 byte
too many for its memory resource -- fix the platform code and the IDE driver
in accordance.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The driver fails to compile with CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA enabled:

drivers/ide/mips/au1xxx-ide.c: In function `auide_build_dmatable':
drivers/ide/mips/au1xxx-ide.c:256: error: implicit declaration of function
`sg_virt'
drivers/ide/mips/au1xxx-ide.c:275: error: implicit declaration of function
`sg_next'
drivers/ide/mips/au1xxx-ide.c:275: warning: assignment makes pointer from
integer without a cast

Fix this by including <linux/scatterlist.h>. While at it, remove the #include's
without which the driver happily builds.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c:

include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared 
`static' but never defined
include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared
 `static' but never defined

by wiping out the whole "function prototyping" section from the header file
<asm-mips/mach-au1x00/au1xxx_ide.h> as it mostly declared functions that are
already dead in the IDE driver; move the only useful prototype into the driver.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The num_interrupt_in, num_bulk_in, and other checks in the usb-serial
code are just wrong, there are too many different devices out there with
different numbers of endpoints.  We need to just be sticking with the
device ids instead of trying to catch this kind of thing.  It broke too
many different devices.

This fixes a large number of usb-serial devices to get them working
properly again.


Cc: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch add new vendor ID and device ID  for AMOI HSDPA modem. 

From: tang kai <tangk73@hotmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

 - declare the unusal device for Huawei data card devices in
   unusual_devs.h
 - disable the product ID matching for Huawei data card devices in
   usb_match_device function of driver.c
 - declare the product IDs in option.c.
Signed-off-by: Nfangxiaozhi <huananhu@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add devices by AMOI and NovatelWireless.
Signed-Off-By: NMatthias Urlichs <matthias@urlichs.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The modem was detected, the ttyUSB{0,1,2} appeared, a call could be
made, and the expected data rate was achieved.  Tested for an hour or
two, total of 100Mb.  I shall do more testing.
Signed-off-by: NJames Cameron <quozl@laptop.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The THERMAL_MAX_TRIPS value is set to 10.  It is too few for the Compaq AP550
machine which has 12 trip points.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

List could have become empty after the unlocked check that was made earlier,
so check again inside the lock.

Should fix https://bugzilla.redhat.com/show_bug.cgi?id=427765Signed-off-by: NChuck Ebbert <cebbert@redhat.com>
Cc: <stable@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The SPI core now expects num_chipselect to be set correctly as due to added
checks on the chip being selected before an transfer is allowed.  This patch
adds a num_cs field to the platform data which needs to be set correctly
before adding the SPI platform device.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pass the bus number we expect the S3C24XX SPI driver to attach to via the
platform data.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The s3c24xx_spi_txrx() function should initialise the completion each time
before using it, otherwise we end up with the possibility of returning success
before the interrupt handler has processed all the data.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since 43cc71ee, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable serial
platform drivers, to re-enable auto loading.

NOTE that Kconfig for some of these drivers doesn't allow modular builds, and
thus doesn't match the driver source's unload support.  Presumably their
unload code is buggy and/or weakly tested...

[dbrownell@users.sourceforge.net: more drivers, registration fixes]
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since 43cc71ee, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable PCMCIA
platform drivers, to re-enable auto loading.

[dbrownell@users.sourceforge.net: registration fixes]
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since 43cc71ee, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable 'misc'
platform drivers, to re-enable auto loading.

[dbrownell@users.sourceforge.net:  bugfix, registration fixes]
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/proc/fb is not removed during rmmod.

Steps to reproduce:

	modprobe fb
	rmmod fb
	ls /proc

BUG: unable to handle kernel paging request at ffffffffa0094370
IP: [<ffffffff802b92a1>] proc_get_inode+0x101/0x130
PGD 203067 PUD 207063 PMD 17e758067 PTE 0
Oops: 0000 [1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:02.0/resource
CPU 1
Modules linked in: nf_conntrack_irc xt_state iptable_filter ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack ip_tables x_tables vfat fat usbhid ehci_hcd uhci_hcd usbcore sr_mod cdrom [last unloaded: fb]
Pid: 21205, comm: ls Not tainted 2.6.25-rc8-mm2 #14
RIP: 0010:[<ffffffff802b92a1>]  [<ffffffff802b92a1>] proc_get_inode+0x101/0x130
RSP: 0018:ffff81017c4bfc78  EFLAGS: 00010246
RAX: 0000000000008000 RBX: ffff8101787f5470 RCX: 0000000048011ccc
RDX: ffffffffa0094320 RSI: ffff810006ad43b0 RDI: ffff81017fc2cc00
RBP: ffff81017e450300 R08: 0000000000000002 R09: ffff81017c5d1000
R10: 0000000000000000 R11: 0000000000000246 R12: ffff81016b903a28
R13: ffff81017f822020 R14: ffff81017c4bfd58 R15: ffff81017f822020
FS:  00007f08e71696f0(0000) GS:ffff81017fc06480(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffffffa0094370 CR3: 000000017e54a000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process ls (pid: 21205, threadinfo ffff81017c4be000, task ffff81017de48770)
Stack:  ffff81017c5d1000 00000000ffffffea ffff81017e450300 ffffffff802bdd1e
 ffff81017f802258 ffff81017c4bfe48 ffff81016b903a28 ffff81017f822020
 ffff81017c4bfd48 ffffffff802b9ba0 ffff81016b903a28 ffff81017f802258
Call Trace:
 [<ffffffff802bdd1e>] ? proc_lookup_de+0x8e/0x100
 [<ffffffff802b9ba0>] ? proc_root_lookup+0x20/0x60
 [<ffffffff802882a7>] ? do_lookup+0x1b7/0x210
 [<ffffffff8028883d>] ? __link_path_walk+0x53d/0x7f0
 [<ffffffff80295eb8>] ? mntput_no_expire+0x28/0x130
 [<ffffffff80288b4a>] ? path_walk+0x5a/0xc0
 [<ffffffff80288dd3>] ? do_path_lookup+0x83/0x1c0
 [<ffffffff80287785>] ? getname+0xe5/0x210
 [<ffffffff80289adb>] ? __user_walk_fd+0x4b/0x80
 [<ffffffff8028236c>] ? vfs_lstat_fd+0x2c/0x70
 [<ffffffff8028bf1e>] ? filldir+0xae/0xf0
 [<ffffffff802b92e9>] ? de_put+0x9/0x50
 [<ffffffff8029633d>] ? mnt_want_write+0x2d/0x80
 [<ffffffff8029339f>] ? touch_atime+0x1f/0x170
 [<ffffffff802b9b1d>] ? proc_root_readdir+0x7d/0xa0
 [<ffffffff802825e7>] ? sys_newlstat+0x27/0x50
 [<ffffffff8028bffb>] ? vfs_readdir+0x9b/0xd0
 [<ffffffff8028c0fe>] ? sys_getdents+0xce/0xe0
 [<ffffffff8020b39b>] ? system_call_after_swapgs+0x7b/0x80

Code: b7 83 b2 00 00 00 25 00 f0 00 00 3d 00 80 00 00 74 19 48 89 93 f0 00 00 00 48 89 df e8 39 9a fd ff 48 89 d8 48 83 c4 08 5b 5d c3 <48> 83 7a 50 00 48 c7 c0 60 16 45 80 48 c7 c2 40 17 45 80 48 0f
RIP  [<ffffffff802b92a1>] proc_get_inode+0x101/0x130
 RSP <ffff81017c4bfc78>
CR2: ffffffffa0094370
---[ end trace c71hiarjan8ab739 ]---
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
"Antonino A. Daplas" <adaplas@pol.net>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since 43cc71ee, the platform
modalias is prefixed with "platform:". Add MODULE_ALIAS() to the
hotpluggable platform LED drivers, to re-enable auto loading.

[dbrownell@users.sourceforge.net: more drivers, registration fixes]
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a bug in the function of cmos_set_alarm.  RTC alarm time for October
can't be set correctly.

For October: 0x0A will be written into the RTC region (MONTH_ALARM) in current
kernel.  But in fact 0x10 should be written.  Wildcards are also not handled
correctly.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since 43cc71ee, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable MMC host
platform drivers, to re-enable auto loading.

Also, add missing owner declarations in driver init.

[dbrownell@users.sourceforge.net: registration fixes]
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>