Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 30 3月, 2009 2 次提交
  3. 09 3月, 2009 2 次提交
    • R
      lguest: fix for CONFIG_SPARSE_IRQ=y · 6db6a5f3
      由 Rusty Russell 提交于 
      Impact: remove lots of lguest boot WARN_ON() when CONFIG_SPARSE_IRQ=y

We now need to call irq_to_desc_alloc_cpu() before
set_irq_chip_and_handler_name(), but we can't do that from init_IRQ (no
kmalloc available).

So do it as we use interrupts instead.  Also means we only alloc for
irqs we use, which was the intent of CONFIG_SPARSE_IRQ anyway.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
      6db6a5f3
    • R
      lguest: fix crash 'unhandled trap 13 at <native_read_msr_safe>' · cbd88c8e
      由 Rusty Russell 提交于 
      Impact: fix lguest boot crash on modern Intel machines

The code in early_init_intel does:

	if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
		u64 misc_enable;

		rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);

And that rdmsr faults (not allowed from non-0 PL).  We can get around
this by mugging the family ID part of the cpuid.  5 seems like a good
number.

Of course, this is a hack (how very lguest!).  We could just indicate
that we don't support MSRs, or implement lguest_rdmst.
Reported-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Tested-by: NPatrick McHardy <kaber@trash.net>
      cbd88c8e
  5. 18 2月, 2009 1 次提交
  7. 17 2月, 2009 1 次提交
  9. 10 2月, 2009 1 次提交
    • T
      x86: make lazy %gs optional on x86_32 · ccbeed3a
      由 Tejun Heo 提交于 
      Impact: pt_regs changed, lazy gs handling made optional, add slight
        overhead to SAVE_ALL, simplifies error_code path a bit

On x86_32, %gs hasn't been used by kernel and handled lazily.  pt_regs
doesn't have place for it and gs is saved/loaded only when necessary.
In preparation for stack protector support, this patch makes lazy %gs
handling optional by doing the followings.

* Add CONFIG_X86_32_LAZY_GS and place for gs in pt_regs.

* Save and restore %gs along with other registers in entry_32.S unless
  LAZY_GS.  Note that this unfortunately adds "pushl $0" on SAVE_ALL
  even when LAZY_GS.  However, it adds no overhead to common exit path
  and simplifies entry path with error code.

* Define different user_gs accessors depending on LAZY_GS and add
  lazy_save_gs() and lazy_load_gs() which are noop if !LAZY_GS.  The
  lazy_*_gs() ops are used to save, load and clear %gs lazily.

* Define ELF_CORE_COPY_KERNEL_REGS() which always read %gs directly.

xen and lguest changes need to be verified.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ccbeed3a
  11. 31 1月, 2009 1 次提交
    • J
      x86/paravirt: add register-saving thunks to reduce caller register pressure · ecb93d1c
      由 Jeremy Fitzhardinge 提交于 
      Impact: Optimization

One of the problems with inserting a pile of C calls where previously
there were none is that the register pressure is greatly increased.
The C calling convention says that the caller must expect a certain
set of registers may be trashed by the callee, and that the callee can
use those registers without restriction.  This includes the function
argument registers, and several others.

This patch seeks to alleviate this pressure by introducing wrapper
thunks that will do the register saving/restoring, so that the
callsite doesn't need to worry about it, but the callee function can
be conventional compiler-generated code.  In many cases (particularly
performance-sensitive cases) the callee will be in assembler anyway,
and need not use the compiler's calling convention.

Standard calling convention is:
	 arguments	    return	scratch
x86-32	 eax edx ecx	    eax		?
x86-64	 rdi rsi rdx rcx    rax		r8 r9 r10 r11

The thunk preserves all argument and scratch registers.  The return
register is not preserved, and is available as a scratch register for
unwrapped callee code (and of course the return value).

Wrapped function pointers are themselves wrapped in a struct
paravirt_callee_save structure, in order to get some warning from the
compiler when functions with mismatched calling conventions are used.

The most common paravirt ops, both statically and dynamically, are
interrupt enable/disable/save/restore, so handle them first.  This is
particularly easy since their calls are handled specially anyway.

XXX Deal with VMI.  What's their calling convention?
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      ecb93d1c
  13. 30 1月, 2009 1 次提交
  15. 13 12月, 2008 1 次提交
  17. 12 11月, 2008 1 次提交
  19. 31 10月, 2008 2 次提交
  21. 16 10月, 2008 1 次提交
    • Y
      x86: make 32bit support per_cpu vector · 497c9a19
      由 Yinghai Lu 提交于 
      so we can merge io_apic_32.c and io_apic_64.c

v2: Use cpu_online_map as target cpus for bigsmp, just like 64-bit is doing.

Also remove some unused TARGET_CPUS macro.

v3: need to check if desc is null in smp_irq_move_cleanup

also migration needs to reset vector too, so copy __target_IO_APIC_irq
from 64bit.

(the duplication will go away once the two files are unified.)
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      497c9a19
  23. 29 7月, 2008 1 次提交
  25. 20 7月, 2008 1 次提交
  27. 19 7月, 2008 1 次提交
  29. 18 7月, 2008 1 次提交
    • M
      x86: APIC: remove apic_write_around(); use alternatives · 593f4a78
      由 Maciej W. Rozycki 提交于 
      Use alternatives to select the workaround for the 11AP Pentium erratum
for the affected steppings on the fly rather than build time.  Remove the
X86_GOOD_APIC configuration option and replace all the calls to
apic_write_around() with plain apic_write(), protecting accesses to the
ESR as appropriate due to the 3AP Pentium erratum.  Remove
apic_read_around() and all its invocations altogether as not needed.
Remove apic_write_atomic() and all its implementing backends.  The use of
ASM_OUTPUT2() is not strictly needed for input constraints, but I have
used it for readability's sake.

I had the feeling no one else was brave enough to do it, so I went ahead
and here it is.  Verified by checking the generated assembly and tested
with both a 32-bit and a 64-bit configuration, also with the 11AP
"feature" forced on and verified with gdb on /proc/kcore to work as
expected (as an 11AP machines are quite hard to get hands on these days).
Some script complained about the use of "volatile", but apic_write() needs
it for the same reason and is effectively a replacement for writel(), so I
have disregarded it.

I am not sure what the policy wrt defconfig files is, they are generated
and there is risk of a conflict resulting from an unrelated change, so I
have left changes to them out.  The option will get removed from them at
the next run.

Some testing with machines other than mine will be needed to avoid some
stupid mistake, but despite its volume, the change is not really that
intrusive, so I am fairly confident that because it works for me, it will
everywhere.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      593f4a78
  31. 12 7月, 2008 1 次提交
  33. 09 7月, 2008 1 次提交
  35. 08 7月, 2008 1 次提交
  37. 31 5月, 2008 1 次提交
  39. 30 5月, 2008 1 次提交
  41. 17 4月, 2008 1 次提交
  43. 28 3月, 2008 1 次提交
  45. 11 3月, 2008 2 次提交
    • R
      lguest: Revert 1ce70c4f, fix real problem. · 4357bd94
      由 Rusty Russell 提交于 
      Ahmed managed to crash the Host in release_pgd(), which cannot be a Guest
bug, and indeed it wasn't.

The bug was that handing a 0 as the address of the toplevel page table
being manipulated can cause the lookup code in find_pgdir() to return
an uninitialized cache entry (we shadow up to 4 top level page tables
for each Guest).

Commit 37cc8d7f introduced this
behaviour in the Guest, uncovering the bug.

The patch which he submitted (which removed the /4 from the index
calculation) simply ensured that these high-indexed entries hit the
early exit path of guest_set_pmd().  But you get lots of segfaults in
guest userspace as the PMDs aren't being updated.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      4357bd94
    • R
      lguest: Sanitize the lguest clock. · 3fabc55f
      由 Rusty Russell 提交于 
      Now the TSC code handles a zero return from calculate_cpu_khz(),
lguest can simply pass through the value it gets from the Host: if
non-zero, all the normal TSC code applies.

Otherwise (or if the Host really doesn't support TSC), the clocksource
code will fall back to the slower but reasonable lguest clock.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      3fabc55f
  47. 26 2月, 2008 2 次提交
    • A
      x86/lguest: fix pgdir pmd index calculation · 1ce70c4f
      由 Ahmed S. Darwish 提交于 
      Hi all,

Beginning from commits close to v2.6.25-rc2, running lguest always oopses
the host kernel. Oops is at [1].

Bisection led to the following commit:

commit 37cc8d7f

    x86/early_ioremap: don't assume we're using swapper_pg_dir

    At the early stages of boot, before the kernel pagetable has been
    fully initialized, a Xen kernel will still be running off the
    Xen-provided pagetables rather than swapper_pg_dir[].  Therefore,
    readback cr3 to determine the base of the pagetable rather than
    assuming swapper_pg_dir[].

 static inline pmd_t * __init early_ioremap_pmd(unsigned long addr)
 {
-	pgd_t *pgd = &swapper_pg_dir[pgd_index(addr)];
+	/* Don't assume we're using swapper_pg_dir at this point */
+	pgd_t *base = __va(read_cr3());
+	pgd_t *pgd = &base[pgd_index(addr)];
 	pud_t *pud = pud_offset(pgd, addr);
 	pmd_t *pmd = pmd_offset(pud, addr);

Trying to analyze the problem, it seems on the guest side of lguest,
%cr3 has a different value from &swapper_pg-dir (which
is AFAIK fine on a pravirt guest):

Putting some debugging messages in early_ioremap_pmd:

/* Appears 3 times */
[    0.000000] ***************************
[    0.000000] __va(%cr3) = c0000000, &swapper_pg_dir = c02cc000
[    0.000000] ***************************

After 8 hours of debugging and staring on lguest code, I noticed something
strange in paravirt_ops->set_pmd hypercall invocation:

static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
{
	*pmdp = pmdval;
	lazy_hcall(LHCALL_SET_PMD, __pa(pmdp)&PAGE_MASK,
		   (__pa(pmdp)&(PAGE_SIZE-1))/4, 0);
}

The first hcall parameter is global pgdir which looks fine. The second
parameter is the pmd index in the pgdir which is suspectful.

AFAIK, calculating the index of pmd does not need a divisoin over four.
Removing the division made lguest work fine again . Patch is at [2].

I am not sure why the division over four existed in the first place. It
seems bogus, maybe the Xen patch just made the problem appear ?

[2]: The patch:

[PATCH] lguest: fix pgdir pmd index cacluation

Remove an error in index calculation which leads to removing
a not existing shadow page table (leading to a Null dereference).
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1ce70c4f
    • H
      lguest: include function prototypes · cbc34973
      由 Harvey Harrison 提交于 
      Added a declaration to asm-x86/lguest.h and moved the extern arrays there
as well.  As an alternative to including asm/lguest.h directly, an
include could be put in linux/lguest.h
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Cc: "rusty@rustcorp.com.au" <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      cbc34973
  49. 30 1月, 2008 7 次提交
  51. 05 11月, 2007 2 次提交
  53. 25 10月, 2007 2 次提交