- 27 5月, 2009 15 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Use MII_BUS_ID_SIZE instead. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
BUS_ID_SIZE is really no more, and device names are dynamically allocated and thus can be any necessary size. So remove the BUG check here making sure BUS_ID_SIZE is at least as large as IFNAMSIZ. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jean Delvare 提交于
The r8169 driver supports 3 different families of network chips (RTL8169, RTL8168 and RTL8101). When an unknown version is found, the driver currently always defaults to the RTL8169 variant. This has very little chance to ever work for chips of the other families. So better define a per-family default. Signed-off-by: NJean Delvare <jdelvare@suse.de> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kevin Hao 提交于
Inspired by the patch for 8139too (bda6a15a). Currently we can't set mac address on a running ucc_geth device. But this is needed when you use this device as a bonding slave in bonding device in balance-alb mode. So add this feature for ucc_geth device. Signed-off-by: NKevin Hao <kexin.hao@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tanli Chang 提交于
This patch is for supporting C10NEM. C10NEM is a switch module, which has back-to-back XAUI link connected to blades. Signed-off-by: NTanli Chang <tanli.chang@sun.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Don Skidmore 提交于
If we loaded the driver with out a SFP module plugged in it would leave it in a state that make it later unable to link when a module was plugged in. This patch corrects that by: ixgbe_probe() - moving the check for IXGBE_ERR_SFP_NOT_PRESENT from after get_invariants() to after reset_hw() as now reset_hw() is where this condition will be indentified. ixgbe_reset_hw_82598() - Enable this function to now return IXGBE_ERR_SFP_NOT_PRESENT. ixgbe_identify_sfp_module_generic() - This where the lack of SFP module is detected. Modifications are added to allow a different return value for modules that just haven't been plugged in yet. Other functions were updated to allow correct logging. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
Device ID 0x10d8 is the default silicon device ID for 82599. However, the device will not be functional without an EEPROM, so we want to prevent the driver from loading on the device. Otherwise, the driver will load, but no PHY setup or PCIe setup will occur, causing the device to be unusable. To prevent users from encountering this, just remove the device ID. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The phy port status register has the MDI-X status bit on bit 11, not bit 3 as is currently setup in the define. This patch corrects that so the correct bit is checked on igp PHY types. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
Based on previous patch from Jesper Dangaard Brouer. The RNBC (Receive No Buffers Count) register for the 82576, indicate that frames were received when there were no available buffers in host memory to store those frames (receive descriptor head and tail pointers were equal). The packet is still received by the NIC if there is space in the FIFO on the NIC. As the RNBC value is not a packet drop, the driver stores this value in net_stats.rx_fifo_errors to indicate that there were no system buffers available for the incoming packet. Actual dropped packets are counted in the MPC value. Saving the stats in dev->net_stats makes it visible via /proc/net/dev as "fifo", and thus viewable to ifconfig as "overruns" and 'netstat -i' as "RX-OVR". The Receive No Buffers Count (RNBC) can already be queried by ethtool -S as "rx_no_buffer_count". Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
Based on the previous patches from Jesper Dangaard Brouer <hawk@comx.dk> Implement reading the per queue drop stats register RQDPC (Receive Queue Drop Packet Count). It counts the number of packets dropped by a queue due to lack of descriptors available. Notice RQDPC (Receive Queue Drop Packet Count) stats only gets incremented, if the DROP_EN bit it set (in the SRRCTL register for that queue). If DROP_EN bit is NOT set, then the some what equivalent count is stored in RNBC (not per queue basis). The RQDPC register is only 12 bit, thus the precision might suffer due to overrun in-netween the watchdog polling interval. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Kirsher 提交于
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Beregalov 提交于
Also convert DPRINTK to pr_debug and dev_printk to dev_<foo>. Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Beregalov 提交于
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Beregalov 提交于
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 5月, 2009 10 次提交
-
-
由 Eric Dumazet 提交于
Get rid of private struct net_device_stats in "struct atl1e_adapter", and use one provided in struct net_device instead. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We would like to get rid of netdev->trans_start = jiffies; that about all net drivers have to use in their start_xmit() function, and use txq->trans_start instead. This can be done generically in core network, as suggested by David. Some devices, (particularly loopback) dont need trans_start update, because they dont have transmit watchdog. We could add a new device flag, or rely on fact that txq->tran_start can be updated is txq->xmit_lock_owner is different than -1. Use a helper function to hide our choice. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yoshihiro Shimoda 提交于
Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yoshihiro Shimoda 提交于
This improves readability by collecting CPU dependency code. Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yoshihiro Shimoda 提交于
Fix the problem that this driver not update rxdesc in sh_eth_rx. Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yoshihiro Shimoda 提交于
Fix the probrem that TX/RX descirptor not set physical memory. Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yoshihiro Shimoda 提交于
Fix the problem that may not work receive process by cache coherency issue. Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Right-shifts of signed integers are implementation-defined so unportable. With feedback from: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gabriel Paubert 提交于
Signed-off-by: NGabriel Paubert <paubert@iram.es> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhu Yi 提交于
The patch makes iwmc3200wifi select CFG80211 instead of LIB80211. This fixed module link error reported by Randy Dunlap <randy.dunlap@oracle.com> when compiling iwmc3200wifi without cfg80211 selected. WIRELESS_EXT is also selected by iwmc3200wifi. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2009 15 次提交
-
-
由 Alexander Beregalov 提交于
All drivers are already converted to new net_device_ops API and nobody uses old API anymore. Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Conflicts: drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
-
由 Andreas Eversberg 提交于
The new ID is validated by Cologne Chip. LEDs control is also supported. Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Eversberg 提交于
DTMF detection was enabled when it was not supposed to. Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Reducing the number of direct users of sock_{recv,send}msg. Modified version to match the latest context. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Keil 提交于
This patch make debug printk's KERN_DEBUG and also fix some codestyle issues. Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Eversberg 提交于
new id for HFC-8S Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roel Kluin 提交于
dev->id is unsigned so a get_free_devid() error is ignored. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Keil 提交于
New version without emulating arch specific stuff for the other architectures, the special IO and init functions for the 8xx microcontroller are in a separate include file. Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Keil 提交于
If the channel receive function returns an error the skb must be freed. Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Eversberg 提交于
Using sapi values other than 0 work now. The "OpenBSC" project does not require special kernel patch anymore. Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frank Seidel 提交于
Before: 1656 bytes on i386, now 164. Modified by Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: NFrank Seidel <frank@f-seidel.de> Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Eversberg 提交于
Added SAPI value to use SAPIs different than 0. Now fixed TEIs work in NT mode. This allows PTP endpoint to be connected to PTMP ports together with other PTMP endpoints. New enhanced version, thanks to Sam Ravnborg <sam@ravnborg.org> for the hints. Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Eversberg 提交于
Audio recording requires software audio processing. Both hardware and software processing is simultaniously possible now. Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Eversberg 提交于
DTMF digits were sent up to socket in locked state. Receive audio stream was not enabled in certain condition. Signed-off-by: NAndreas Eversberg <andreas@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-