提交 e3804cbe 编写于 作者: A Alexander Beregalov 提交者: David S. Miller

net: remove COMPAT_NET_DEV_OPS

All drivers are already converted to new net_device_ops API
and nobody uses old API anymore.
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 c649c0e3
......@@ -25,15 +25,6 @@ menuconfig NETDEVICES
# that for each of the symbols.
if NETDEVICES
config COMPAT_NET_DEV_OPS
default y
bool "Enable older network device API compatibility"
---help---
This option enables kernel compatibility with older network devices
that do not use net_device_ops interface.
If unsure, say Y.
config IFB
tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT
......
......@@ -901,44 +901,6 @@ struct net_device
/* max exchange id for FCoE LRO by ddp */
unsigned int fcoe_ddp_xid;
#endif
#ifdef CONFIG_COMPAT_NET_DEV_OPS
struct {
int (*init)(struct net_device *dev);
void (*uninit)(struct net_device *dev);
int (*open)(struct net_device *dev);
int (*stop)(struct net_device *dev);
int (*hard_start_xmit) (struct sk_buff *skb,
struct net_device *dev);
u16 (*select_queue)(struct net_device *dev,
struct sk_buff *skb);
void (*change_rx_flags)(struct net_device *dev,
int flags);
void (*set_rx_mode)(struct net_device *dev);
void (*set_multicast_list)(struct net_device *dev);
int (*set_mac_address)(struct net_device *dev,
void *addr);
int (*validate_addr)(struct net_device *dev);
int (*do_ioctl)(struct net_device *dev,
struct ifreq *ifr, int cmd);
int (*set_config)(struct net_device *dev,
struct ifmap *map);
int (*change_mtu)(struct net_device *dev, int new_mtu);
int (*neigh_setup)(struct net_device *dev,
struct neigh_parms *);
void (*tx_timeout) (struct net_device *dev);
struct net_device_stats* (*get_stats)(struct net_device *dev);
void (*vlan_rx_register)(struct net_device *dev,
struct vlan_group *grp);
void (*vlan_rx_add_vid)(struct net_device *dev,
unsigned short vid);
void (*vlan_rx_kill_vid)(struct net_device *dev,
unsigned short vid);
#ifdef CONFIG_NET_POLL_CONTROLLER
void (*poll_controller)(struct net_device *dev);
#endif
};
#endif
};
#define to_net_dev(d) container_of(d, struct net_device, dev)
......
......@@ -185,10 +185,6 @@ static const struct header_ops fddi_header_ops = {
static void fddi_setup(struct net_device *dev)
{
dev->header_ops = &fddi_header_ops;
#ifdef CONFIG_COMPAT_NET_DEV_OPS
dev->change_mtu = fddi_change_mtu,
#endif
dev->type = ARPHRD_FDDI;
dev->hard_header_len = FDDI_K_SNAP_HLEN+3; /* Assume 802.2 SNAP hdr len + 3 pad bytes */
dev->mtu = FDDI_K_SNAP_DLEN; /* Assume max payload of 802.2 SNAP frame */
......
......@@ -193,11 +193,6 @@ static const struct header_ops hippi_header_ops = {
static void hippi_setup(struct net_device *dev)
{
#ifdef CONFIG_COMPAT_NET_DEV_OPS
dev->change_mtu = hippi_change_mtu;
dev->set_mac_address = hippi_mac_addr;
dev->neigh_setup = hippi_neigh_setup_dev;
#endif
dev->header_ops = &hippi_header_ops;
/*
......
......@@ -644,7 +644,6 @@ static int vlan_dev_init(struct net_device *dev)
dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
dev->netdev_ops = &vlan_netdev_ops;
}
netdev_resync_ops(dev);
if (is_vlan_dev(real_dev))
subclass = 1;
......
......@@ -9,21 +9,10 @@
#include <linux/if_arp.h>
#include <linux/if_ltalk.h>
#ifdef CONFIG_COMPAT_NET_DEV_OPS
static int ltalk_change_mtu(struct net_device *dev, int mtu)
{
return -EINVAL;
}
#endif
static void ltalk_setup(struct net_device *dev)
{
/* Fill in the fields of the device structure with localtalk-generic values. */
#ifdef CONFIG_COMPAT_NET_DEV_OPS
dev->change_mtu = ltalk_change_mtu;
#endif
dev->type = ARPHRD_LOCALTLK;
dev->hard_header_len = LTALK_HLEN;
dev->mtu = LTALK_MTU;
......
......@@ -4580,39 +4580,6 @@ unsigned long netdev_fix_features(unsigned long features, const char *name)
}
EXPORT_SYMBOL(netdev_fix_features);
/* Some devices need to (re-)set their netdev_ops inside
* ->init() or similar. If that happens, we have to setup
* the compat pointers again.
*/
void netdev_resync_ops(struct net_device *dev)
{
#ifdef CONFIG_COMPAT_NET_DEV_OPS
const struct net_device_ops *ops = dev->netdev_ops;
dev->init = ops->ndo_init;
dev->uninit = ops->ndo_uninit;
dev->open = ops->ndo_open;
dev->change_rx_flags = ops->ndo_change_rx_flags;
dev->set_rx_mode = ops->ndo_set_rx_mode;
dev->set_multicast_list = ops->ndo_set_multicast_list;
dev->set_mac_address = ops->ndo_set_mac_address;
dev->validate_addr = ops->ndo_validate_addr;
dev->do_ioctl = ops->ndo_do_ioctl;
dev->set_config = ops->ndo_set_config;
dev->change_mtu = ops->ndo_change_mtu;
dev->neigh_setup = ops->ndo_neigh_setup;
dev->tx_timeout = ops->ndo_tx_timeout;
dev->get_stats = ops->ndo_get_stats;
dev->vlan_rx_register = ops->ndo_vlan_rx_register;
dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = ops->ndo_poll_controller;
#endif
#endif
}
EXPORT_SYMBOL(netdev_resync_ops);
/**
* register_netdevice - register a network device
* @dev: device to register
......@@ -4652,23 +4619,6 @@ int register_netdevice(struct net_device *dev)
dev->iflink = -1;
#ifdef CONFIG_COMPAT_NET_DEV_OPS
/* Netdevice_ops API compatibility support.
* This is temporary until all network devices are converted.
*/
if (dev->netdev_ops) {
netdev_resync_ops(dev);
} else {
char drivername[64];
pr_info("%s (%s): not using net_device_ops yet\n",
dev->name, netdev_drivername(dev, drivername, 64));
/* This works only because net_device_ops and the
compatibility structure are the same. */
dev->netdev_ops = (void *) &(dev->init);
}
#endif
/* Init, if this function is available */
if (dev->netdev_ops->ndo_init) {
ret = dev->netdev_ops->ndo_init(dev);
......
......@@ -337,11 +337,6 @@ const struct header_ops eth_header_ops ____cacheline_aligned = {
void ether_setup(struct net_device *dev)
{
dev->header_ops = &eth_header_ops;
#ifdef CONFIG_COMPAT_NET_DEV_OPS
dev->change_mtu = eth_change_mtu;
dev->set_mac_address = eth_mac_addr;
dev->validate_addr = eth_validate_addr;
#endif
dev->type = ARPHRD_ETHER;
dev->hard_header_len = ETH_HLEN;
dev->mtu = ETH_DATA_LEN;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册