- 19 3月, 2013 3 次提交
-
-
由 Roger Pau Monne 提交于
We may use foreach_grant_safe in the future with empty lists, so make sure we can handle them. Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com> Cc: xen-devel@lists.xen.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Mihnea Dobrescu-Balaur 提交于
The benefits are: * code is cleaner * kmemdup adds additional debugging info useful for tracking the real place where memory was allocated (CONFIG_DEBUG_SLAB). Signed-off-by: NMihnea Dobrescu-Balaur <mihneadb@gmail.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Jan Beulich 提交于
Commit 77089926 ("xen/blkback: Seperate the bio allocation and the bio submission") consolidated the pendcnt updates to just a single write, neglecting the fact that the error path relied on it getting set to 1 up front (such that the decrement in __end_block_io_op() would actually drop the count to zero, triggering the necessary cleanup actions). Also remove a misleading and a stale (after said commit) comment. CC: stable@vger.kernel.org Signed-off-by: NJan Beulich <jbeulich@suse.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 12 3月, 2013 2 次提交
-
-
由 Zoltan Kiss 提交于
These values shouldn't be negative, but after an overflow their value can turn into negative, if they are signed. xentop can show bogus values in this case. Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Reported-by: NIchiro Ogino <ichiro.ogino@citrix.co.jp> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 David Vrabel 提交于
If the frontend is using a non-native protocol (e.g., a 64-bit frontend with a 32-bit backend) and it sent an unrecognized request, the request was not translated and the response would have the incorrect ID. This may cause the frontend driver to behave incorrectly or crash. Since the ID field in the request is always in the same place, regardless of the request type we can get the correct ID and make a valid response (which will report BLKIF_RSP_EOPNOTSUPP). This bug affected 64-bit SLES 11 guests when using a 32-bit backend. This guest does a BLKIF_OP_RESERVED_1 (BLKIF_OP_PACKET in the SLES source) and would crash in blkif_int() as the ID in the response would be invalid. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Cc: stable@vger.kernel.org Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 01 3月, 2013 1 次提交
-
-
由 Chen Gang 提交于
If call xen_vbd_translate failed, the preq.dev will be not initialized. Use blkif->vbd.pdevice instead (still better to print relative info). Note that before commit 01c681d4 (xen/blkback: Don't trust the handle from the frontend.) the value bogus, as it was the guest provided value from req->u.rw.handle rather than the actual device. Signed-off-by: NChen Gang <gang.chen@asianux.com> Acked-by: NJan Beulich <JBeulich@suse.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 20 2月, 2013 4 次提交
-
-
由 Roger Pau Monne 提交于
With current persistent grants implementation we are not freeing the persistent grants after we disconnect the device. Since grant map operations change the mfn of the allocated page, and we can no longer pass it to __free_page without setting the mfn to a sane value, use balloon grant pages instead, as the gntdev device does. Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com> Cc: stable@vger.kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
Replace llist_for_each_entry_safe with a while loop. llist_for_each_entry_safe can trigger a bug in GCC 4.1, so it's best to remove it and use a while loop and do the deletion manually. Specifically this bug can be triggered by hot-unplugging a disk, either by doing xm block-detach or by save/restore cycle. BUG: unable to handle kernel paging request at fffffffffffffff0 IP: [<ffffffffa0047223>] blkif_free+0x63/0x130 [xen_blkfront] The crash call trace is: ... bad_area_nosemaphore+0x13/0x20 do_page_fault+0x25e/0x4b0 page_fault+0x25/0x30 ? blkif_free+0x63/0x130 [xen_blkfront] blkfront_resume+0x46/0xa0 [xen_blkfront] xenbus_dev_resume+0x6c/0x140 pm_op+0x192/0x1b0 device_resume+0x82/0x1e0 dpm_resume+0xc9/0x1a0 dpm_resume_end+0x15/0x30 do_suspend+0x117/0x1e0 When drilling down to the assembler code, on newer GCC it does .L29: cmpq $-16, %r12 #, persistent_gnt check je .L30 #, out of the loop .L25: ... code in the loop testq %r13, %r13 # n je .L29 #, back to the top of the loop cmpq $-16, %r12 #, persistent_gnt check movq 16(%r12), %r13 # <variable>.node.next, n jne .L25 #, back to the top of the loop .L30: While on GCC 4.1, it is: L78: ... code in the loop testq %r13, %r13 # n je .L78 #, back to the top of the loop movq 16(%rbx), %r13 # <variable>.node.next, n jmp .L78 #, back to the top of the loop Which basically means that the exit loop condition instead of being: &(pos)->member != NULL; is: ; which makes the loop unbound. Since xen-blkfront is the only user of the llist_for_each_entry_safe macro remove it from llist.h. Orabug: 16263164 CC: stable@vger.kernel.org Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
The 'handle' is the device that the request is from. For the life-time of the ring we copy it from a request to a response so that the frontend is not surprised by it. But we do not need it - when we start processing I/Os we have our own 'struct phys_req' which has only most essential information about the request. In fact the 'vbd_translate' ends up over-writing the preq.dev with a value from the backend. This assignment of preq.dev with the 'handle' value is superfluous so lets not do it. Cc: stable@vger.kernel.org Acked-by: NJan Beulich <jbeulich@suse.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Jan Beulich 提交于
"be->mode" is obtained from xenbus_read(), which does a kmalloc() for the message body. The short string is never released, so do it along with freeing "be" itself, and make sure the string isn't kept when backend_changed() doesn't complete successfully (which made it desirable to slightly re-structure that function, so that the error cleanup can be done in one place). Reported-by: NOlaf Hering <olaf@aepfle.de> CC: stable@vger.kernel.org Signed-off-by: NJan Beulich <jbeulich@suse.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 09 2月, 2013 7 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "I was going to hold these off until v3.8 was out, and send them with a stable tag, but as everyone else is pushing much bigger fixes which Linus is accepting, let's save people from the hastle of having to patch v3.8 back into working or use a stable kernel. Looking at the diffstat, this really is high value for its size; this is miniscule compared to how the -rc6 to tip diffstat currently looks. So, four patches in this set: - Punit Agrawal reports that the kernel no longer boots on MPCore due to a new assumption made in the GIC code which isn't true of earlier GIC designs. This is the biggest change in this set. - Punit's boot log also revealed a bunch of WARN_ON() dumps caused by the DT-ification of the GIC support without fixing up non-DT Realview - which now sees a greater number of interrupts than it did before. - A fix for the DMA coherent code from Marek which uses the wrong check for atomic allocations; this can result in spinlock lockups or other nasty effects. - A fix from Will, which will affect all Android based platforms if not applied (which use the 2G:2G VM split) - this causes particularly 'make' to misbehave unless this bug is fixed." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned ARM: DMA mapping: fix bad atomic test ARM: realview: ensure that we have sufficient IRQs available ARM: GIC: fix GIC cpumask initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Revert iwlwifi reclaimed packet tracking, it causes problems for a bunch of folks. From Emmanuel Grumbach. 2) Work limiting code in brcmsmac wifi driver can clear tx status without processing the event. From Arend van Spriel. 3) rtlwifi USB driver processes wrong SKB, fix from Larry Finger. 4) l2tp tunnel delete can race with close, fix from Tom Parkin. 5) pktgen_add_device() failures are not checked at all, fix from Cong Wang. 6) Fix unintentional removal of carrier off from tun_detach(), otherwise we confuse userspace, from Michael S. Tsirkin. 7) Don't leak socket reference counts and ubufs in vhost-net driver, from Jason Wang. 8) vmxnet3 driver gets it's initial carrier state wrong, fix from Neil Horman. 9) Protect against USB networking devices which spam the host with 0 length frames, from Bjørn Mork. 10) Prevent neighbour overflows in ipv6 for locally destined routes, from Marcelo Ricardo. This is the best short-term fix for this, a longer term fix has been implemented in net-next. 11) L2TP uses ipv4 datagram routines in it's ipv6 code, whoops. This mistake is largely because the ipv6 functions don't even have some kind of prefix in their names to suggest they are ipv6 specific. From Tom Parkin. 12) Check SYN packet drops properly in tcp_rcv_fastopen_synack(), from Yuchung Cheng. 13) Fix races and TX skb freeing bugs in via-rhine's NAPI support, from Francois Romieu and your's truly. 14) Fix infinite loops and divides by zero in TCP congestion window handling, from Eric Dumazet, Neal Cardwell, and Ilpo Järvinen. 15) AF_PACKET tx ring handling can leak kernel memory to userspace, fix from Phil Sutter. 16) Fix error handling in ipv6 GRE tunnel transmit, from Tommi Rantala. 17) Protect XEN netback driver against hostile frontend putting garbage into the rings, don't leak pages in TX GOP checking, and add proper resource releasing in error path of xen_netbk_get_requests(). From Ian Campbell. 18) SCTP authentication keys should be cleared out and released with kzfree(), from Daniel Borkmann. 19) L2TP is a bit too clever trying to maintain skb->truesize, and ends up corrupting socket memory accounting to the point where packet sending is halted indefinitely. Just remove the adjustments entirely, they aren't really needed. From Eric Dumazet. 20) ATM Iphase driver uses a data type with the same name as the S390 headers, rename to fix the build. From Heiko Carstens. 21) Fix a typo in copying the inner network header offset from one SKB to another, from Pravin B Shelar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) net: sctp: sctp_endpoint_free: zero out secret key data net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree atm/iphase: rename fregt_t -> ffreg_t net: usb: fix regression from FLAG_NOARP code l2tp: dont play with skb->truesize net: sctp: sctp_auth_key_put: use kzfree instead of kfree netback: correct netbk_tx_err to handle wrap around. xen/netback: free already allocated memory on failure in xen_netbk_get_requests xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop. xen/netback: shutdown the ring if it contains garbage. net: qmi_wwan: add more Huawei devices, including E320 net: cdc_ncm: add another Huawei vendor specific device ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit() tcp: fix for zero packets_in_flight was too broad brcmsmac: rework of mac80211 .flush() callback operation ssb: unregister gpios before unloading ssb bcma: unregister gpios before unloading bcma rtlwifi: Fix scheduling while atomic bug net: usbnet: fix tx_dropped statistics tcp: ipv6: Update MIB counters for drops ...
-
由 David S. Miller 提交于
Daniel Borkmann says: ==================== Cryptographically used keys should be zeroed out when our session ends resp. memory is freed, thus do not leave them somewhere in the memory. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
On sctp_endpoint_destroy, previously used sensitive keying material should be zeroed out before the memory is returned, as we already do with e.g. auth keys when released. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NVlad Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
In sctp_setsockopt_auth_key, we create a temporary copy of the user passed shared auth key for the endpoint or association and after internal setup, we free it right away. Since it's sensitive data, we should zero out the key before returning the memory back to the allocator. Thus, use kzfree instead of kfree, just as we do in sctp_auth_key_put(). Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiko Carstens 提交于
We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the iphase atm device driver, which causes the compile error below. Unfortunately the s390 typedef can't be renamed, since it's a user visible api, nor can I change the include order in s390 code to avoid the conflict. So simply rename the iphase typedef to a new name. Fixes this compile error: In file included from drivers/atm/iphase.c:66:0: drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t' In file included from next/arch/s390/include/asm/ptrace.h:9:0, from next/arch/s390/include/asm/lowcore.h:12, from next/arch/s390/include/asm/thread_info.h:30, from include/linux/thread_info.h:54, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/atm/iphase.c:43: next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Nchas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 2月, 2013 21 次提交
-
-
由 Will Deacon 提交于
We have received multiple reports of mmap failures when running with a 2:2 vm split. These manifest as either -EINVAL with a non page-aligned address (ending 0xaaa) or a SEGV, depending on the application. The issue is commonly observed in children of make, which appears to use bottom-up mmap (assumedly because it changes the stack rlimit). Further investigation reveals that this regression was triggered by 394ef640 ("mm: use vm_unmapped_area() on arm architecture"), whereby TASK_UNMAPPED_BASE is no longer page-aligned for bottom-up mmap, causing get_unmapped_area to choke on misaligned addressed. This patch fixes the problem by defining TASK_UNMAPPED_BASE in terms of TASK_SIZE and explicitly aligns the result to 16M, matching the other end of the heap. Acked-by: NNicolas Pitre <nico@linaro.org> Reported-by: NSteve Capper <steve.capper@arm.com> Reported-by: NJean-Francois Moine <moinejf@free.fr> Reported-by: NChristoffer Dall <cdall@cs.columbia.edu> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Realview fails to boot with this warning: BUG: spinlock lockup suspected on CPU#0, init/1 lock: 0xcf8bde10, .magic: dead4ead, .owner: init/1, .owner_cpu: 0 Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:cf8bde10 r5:cf83d1c0 r4:cf8bde10 r3:cf83d1c0 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c018926c>] (spin_dump+0x84/0x98) [<c01891e8>] (spin_dump+0x0/0x98) from [<c0189460>] (do_raw_spin_lock+0x100/0x198) [<c0189360>] (do_raw_spin_lock+0x0/0x198) from [<c032cbac>] (_raw_spin_lock+0x3c/0x44) [<c032cb70>] (_raw_spin_lock+0x0/0x44) from [<c01c9224>] (pl011_console_write+0xe8/0x11c) [<c01c913c>] (pl011_console_write+0x0/0x11c) from [<c002aea8>] (call_console_drivers.clone.7+0xdc/0x104) [<c002adcc>] (call_console_drivers.clone.7+0x0/0x104) from [<c002b320>] (console_unlock+0x2e8/0x454) [<c002b038>] (console_unlock+0x0/0x454) from [<c002b8b4>] (vprintk_emit+0x2d8/0x594) [<c002b5dc>] (vprintk_emit+0x0/0x594) from [<c0329718>] (printk+0x3c/0x44) [<c03296dc>] (printk+0x0/0x44) from [<c002929c>] (warn_slowpath_common+0x28/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c) [<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0070ab0>] (lockdep_trace_alloc+0xd8/0xf0) [<c00709d8>] (lockdep_trace_alloc+0x0/0xf0) from [<c00c0850>] (kmem_cache_alloc+0x24/0x11c) [<c00c082c>] (kmem_cache_alloc+0x0/0x11c) from [<c00bb044>] (__get_vm_area_node.clone.24+0x7c/0x16c) [<c00bafc8>] (__get_vm_area_node.clone.24+0x0/0x16c) from [<c00bb7b8>] (get_vm_area_caller+0x48/0x54) [<c00bb770>] (get_vm_area_caller+0x0/0x54) from [<c0020064>] (__alloc_remap_buffer.clone.15+0x38/0xb8) [<c002002c>] (__alloc_remap_buffer.clone.15+0x0/0xb8) from [<c0020244>] (__dma_alloc+0x160/0x2c8) [<c00200e4>] (__dma_alloc+0x0/0x2c8) from [<c00204d8>] (arm_dma_alloc+0x88/0xa0)[<c0020450>] (arm_dma_alloc+0x0/0xa0) from [<c00beb00>] (dma_pool_alloc+0xcc/0x1a8) [<c00bea34>] (dma_pool_alloc+0x0/0x1a8) from [<c01a9d14>] (pl08x_fill_llis_for_desc+0x28/0x568) [<c01a9cec>] (pl08x_fill_llis_for_desc+0x0/0x568) from [<c01aab8c>] (pl08x_prep_slave_sg+0x258/0x3b0) [<c01aa934>] (pl08x_prep_slave_sg+0x0/0x3b0) from [<c01c9f74>] (pl011_dma_tx_refill+0x140/0x288) [<c01c9e34>] (pl011_dma_tx_refill+0x0/0x288) from [<c01ca748>] (pl011_start_tx+0xe4/0x120) [<c01ca664>] (pl011_start_tx+0x0/0x120) from [<c01c54a4>] (__uart_start+0x48/0x4c) [<c01c545c>] (__uart_start+0x0/0x4c) from [<c01c632c>] (uart_start+0x2c/0x3c) [<c01c6300>] (uart_start+0x0/0x3c) from [<c01c795c>] (uart_write+0xcc/0xf4) [<c01c7890>] (uart_write+0x0/0xf4) from [<c01b0384>] (n_tty_write+0x1c0/0x3e4) [<c01b01c4>] (n_tty_write+0x0/0x3e4) from [<c01acfe8>] (tty_write+0x144/0x240) [<c01acea4>] (tty_write+0x0/0x240) from [<c01ad17c>] (redirected_tty_write+0x98/0xac) [<c01ad0e4>] (redirected_tty_write+0x0/0xac) from [<c00c371c>] (vfs_write+0xbc/0x150) [<c00c3660>] (vfs_write+0x0/0x150) from [<c00c39c0>] (sys_write+0x4c/0x78) [<c00c3974>] (sys_write+0x0/0x78) from [<c0014460>] (ret_fast_syscall+0x0/0x3c) This happens because the DMA allocation code is not respecting atomic allocations correctly. GFP flags should not be tested for GFP_ATOMIC to determine if an atomic allocation is being requested. GFP_ATOMIC is not a flag but a value. The GFP bitmask flags are all prefixed with __GFP_. The rest of the kernel tests for __GFP_WAIT not being set to indicate an atomic allocation. We need to do the same. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Realview EB with a rev B MPcore tile results in lots of warnings at boot because it can't allocate enough IRQs. Fix this by increasing the number of available IRQs. WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:757 gic_init_bases+0x12c/0x2ec() Cannot allocate irq_descs @ IRQ96, assuming pre-allocated Modules linked in: Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002f5 r5:c042c62c r4:c044ff40 r3:c045f240 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029384>] (warn_slowpath_fmt+0x38/0x40) [<c002934c>] (warn_slowpath_fmt+0x0/0x40) from [<c042c62c>] (gic_init_bases+0x12c/0x2ec) [<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8) [<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24) [<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300) [<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070) ---[ end trace 1b75b31a2719ed1c ]--- ------------[ cut here ]------------ WARNING: at /home/rmk/git/linux-rmk/kernel/irq/irqdomain.c:234 irq_domain_add_legacy+0x80/0x140() Modules linked in: Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000000ea r5:c0081a38 r4:00000000 r3:c045f240 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c) [<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0081a38>] (irq_domain_add_legacy+0x80/0x140) [<c00819b8>] (irq_domain_add_legacy+0x0/0x140) from [<c042c64c>] (gic_init_bases+0x14c/0x2ec) [<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8) [<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24) [<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300) [<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070) ---[ end trace 1b75b31a2719ed1d ]--- ------------[ cut here ]------------ WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:762 gic_init_bases+0x170/0x2ec() Modules linked in: Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002fa r5:c042c670 r4:00000000 r3:c045f240 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c) [<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c042c670>] (gic_init_bases+0x170/0x2ec) [<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8) [<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24) [<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300) [<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070) ---[ end trace 1b75b31a2719ed1e ]--- Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Punit Agrawal reports: > I was trying to boot 3.8-rc5 on Realview EB 11MPCore using > realview-smp_defconfig as a starting point but the kernel failed to > progress past the log below (config attached). > > Pawel suggested I try reverting 384a2902 - "ARM: gic: use a private > mapping for CPU target interfaces" that you've authored. With this > commit reverted the kernel boots. > > I am not quite sure why the commit breaks 11MPCore but Pawel (cc'd) > might be able to shed light on that. Some early GIC implementations return zero for the first distributor CPU routing register. This means we can't rely on that telling us which CPU interface we're connected to. We know that these platforms implement PPIs for IRQs 29-31 - but we shouldn't assume that these will always be populated. So, instead, scan for a non-zero CPU routing register in the first 32 IRQs and use that as our CPU mask. Reported-by: NPunit Agrawal <punit.agrawal@arm.com> Reviewed-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm regression fix from Dave Airlie: "This one fixes a sleep while locked regression that was introduced earlier in 3.8." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
-
由 Lucas Stach 提交于
In commit 6509141f ("usbnet: add new flag FLAG_NOARP for usb net devices"), the newly added flag NOARP was using an already defined value, which broke drivers using flag MULTI_PACKET. Signed-off-by: NLucas Stach <dev@lynxeye.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Andrew Savchenko reported a DNS failure and we diagnosed that some UDP sockets were unable to send more packets because their sk_wmem_alloc was corrupted after a while (tx_queue column in following trace) $ cat /proc/net/udp sl local_address rem_address st tx_queue rx_queue tr tm->when retrnsmt uid timeout inode ref pointer drops ... 459: 00000000:0270 00000000:0000 07 00000000:00000000 00:00000000 00000000 0 0 4507 2 ffff88003d612380 0 466: 00000000:0277 00000000:0000 07 00000000:00000000 00:00000000 00000000 0 0 4802 2 ffff88003d613180 0 470: 076A070A:007B 00000000:0000 07 FFFF4600:00000000 00:00000000 00000000 123 0 5552 2 ffff880039974380 0 470: 010213AC:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000 0 0 4986 2 ffff88003dbd3180 0 470: 010013AC:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000 0 0 4985 2 ffff88003dbd2e00 0 470: 00FCA8C0:007B 00000000:0000 07 FFFFFB00:00000000 00:00000000 00000000 0 0 4984 2 ffff88003dbd2a80 0 ... Playing with skb->truesize is tricky, especially when skb is attached to a socket, as we can fool memory charging. Just remove this code, its not worth trying to be ultra precise in xmit path. Reported-by: NAndrew Savchenko <bircoph@gmail.com> Tested-by: NAndrew Savchenko <bircoph@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
For sensitive data like keying material, it is common practice to zero out keys before returning the memory back to the allocator. Thus, use kzfree instead of kfree. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch into openvswitch Jesse Gross says: ==================== One bug fix for net/3.8 for a long standing problem that was reported a few times recently. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Ian Campbell says: ==================== The Xen netback implementation contains a couple of flaws which can allow a guest to cause a DoS in the backend domain, potentially affecting other domains in the system. CVE-2013-0216 is a failure to sanity check the ring producer/consumer pointers which can allow a guest to cause netback to loop for an extended period preventing other work from occurring. CVE-2013-0217 is a memory leak on an error path which is guest triggerable. The following series contains the fixes for these issues, as previously included in Xen Security Advisory 39: http://lists.xen.org/archives/html/xen-announce/2013-02/msg00001.html Changes in v2: - Typo and block comment format fixes - Added stable Cc ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Acked-by: NJan Beulich <JBeulich@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthew Daley 提交于
Signed-off-by: NMatthew Daley <mattjd@gmail.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Acked-by: NJan Beulich <JBeulich@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Campbell 提交于
A buggy or malicious frontend should not be able to confuse netback. If we spot anything which is not as it should be then shutdown the device and don't try to continue with the ring in a potentially hostile state. Well behaved and non-hostile frontends will not be penalised. As well as making the existing checks for such errors fatal also add a new check that ensures that there isn't an insane number of requests on the ring (i.e. more than would fit in the ring). If the ring contains garbage then previously is was possible to loop over this insane number, getting an error each time and therefore not generating any more pending requests and therefore not exiting the loop in xen_netbk_tx_build_gops for an externded period. Also turn various netdev_dbg calls which no precipitate a fatal error into netdev_err, they are rate limited because the device is shutdown afterwards. This fixes at least one known DoS/softlockup of the backend domain. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: NJan Beulich <JBeulich@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull virtio fix from Rusty Russell: "Obviously I forgot to push this before linux.conf.au..." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_console: Don't access uninitialized data.
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull IB regression fixes from Roland Dreier: - Fix mlx4 VFs not working on old guests because of 64B CQE changes - Fix ill-considered sparse fix for qib - Fix IPoIB crash due to skb double destruct introduced in 3.8-rc1 * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Fix for broken sparse warning fix mlx4_core: Fix advertisement of wrong PF context behaviour IPoIB: Fix crash due to skb double destruct
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "We've got corner cases for updating i_size that ceph was hitting, error handling for quotas when we run out of space, a very subtle snapshot deletion race, a crash while removing devices, and one deadlock between subvolume creation and the sb_internal code (thanks lockdep)." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: move d_instantiate outside the transaction during mksubvol Btrfs: fix EDQUOT handling in btrfs_delalloc_reserve_metadata Btrfs: fix possible stale data exposure Btrfs: fix missing i_size update Btrfs: fix race between snapshot deletion and getting inode Btrfs: fix missing release of the space/qgroup reservation in start_transaction() Btrfs: fix wrong sync_writers decrement in btrfs_file_aio_write() Btrfs: do not merge logged extents if we've removed them from the tree btrfs: don't try to notify udev about missing devices
-
由 Linus Torvalds 提交于
Merge tag 'pinctrl-for-v3.8-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull late pinctrl fixes from Linus Walleij: "Two patches appeared as of late, one was completely news to me, the other one was rotated in -next for the next merge window but turned out to be a showstopper. - Exynos Kconfig fixup - SIRF DT translation bug" * tag 'pinctrl-for-v3.8-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sirf: replace of_gpio_simple_xlate by sirf specific of_xlate pinctrl: exynos: change PINCTRL_EXYNOS option
-
由 Linus Torvalds 提交于
Merge tag 'stable/for-linus-3.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: "This has two fixes. One is a security fix wherein we would spam the kernel printk buffer if one of the guests was misbehaving. The other is much tamer and it was us only checking for one type of error from the IRQ subsystem (when allocating new IRQs) instead of for all of them. - Fix an IRQ allocation where we only check for a specific error (-1). - CVE-2013-0231 / XSA-43. Make xen-pciback rate limit error messages from xen_pcibk_enable_msi{,x}()" * tag 'stable/for-linus-3.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: fix error handling path if xen_allocate_irq_dynamic fails xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator fixes from Mark Brown: "Mostly driver specific fixes here, though one of them uncovered the issue Stephen Warren fixed with multiple OF matches getting upset due to a lack of cleanup." * tag 'regulator-v3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: s2mps11: fix incorrect register for buck10 regulator: clear state each invocation of of_regulator_match regulator: max8997: Fix using wrong dev argument at various places regulator: max77686: Fix using wrong dev argument at various places regulator: max8907: Fix using wrong dev argument for calling of_regulator_match regulator: max8998: fix incorrect min_uV value for ldo10 regulator: tps65910: Fix using wrong dev argument for calling of_regulator_match regulator: tps65217: Fix using wrong dev argument for calling of_regulator_match
-
由 Daniel Vetter 提交于
This fixes up commit e8e89622 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 18 22:25:11 2012 +0100 drm/ttm: fix fence locking in ttm_buffer_object_transfer which leaves behind a might_sleep in atomic context, since the fence_lock spinlock is held over a kmalloc(GFP_KERNEL) call. The fix is to revert the above commit and only take the lock where we need it, around the call to ->sync_obj_ref. v2: Fixup things noticed by Maarten Lankhorst: - Brown paper bag locking bug. - No need for kzalloc if we clear the entire thing on the next line. - check for bo->sync_obj (totally unlikely race, but still someone else could have snuck in) and clear fbo->sync_obj if it's cleared already. Reported-by: NDave Airlie <airlied@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 07 2月, 2013 2 次提交
-
-
由 Sjur Brændeland 提交于
Don't access uninitialized work-queue when removing device. The work queue is initialized only if the device multi-queue. So don't call cancel_work unless this is a multi-queue device. This fixes the following panic: Kernel panic - not syncing: BUG! Call Trace: 62031b28: [<6026085d>] panic+0x16b/0x2d3 62031b30: [<6004ef5e>] flush_work+0x0/0x1d7 62031b60: [<602606f2>] panic+0x0/0x2d3 62031b68: [<600333b0>] memcpy+0x0/0x140 62031b80: [<6002d58a>] unblock_signals+0x0/0x84 62031ba0: [<602609c5>] printk+0x0/0xa0 62031bd8: [<60264e51>] __mutex_unlock_slowpath+0x13d/0x148 62031c10: [<6004ef5e>] flush_work+0x0/0x1d7 62031c18: [<60050234>] try_to_grab_pending+0x0/0x17e 62031c38: [<6004e984>] get_work_gcwq+0x71/0x8f 62031c48: [<60050539>] __cancel_work_timer+0x5b/0x115 62031c78: [<628acc85>] unplug_port+0x0/0x191 [virtio_console] 62031c98: [<6005061c>] cancel_work_sync+0x12/0x14 62031ca8: [<628ace96>] virtcons_remove+0x80/0x15c [virtio_console] 62031ce8: [<628191de>] virtio_dev_remove+0x1e/0x7e [virtio] 62031d08: [<601cf242>] __device_release_driver+0x75/0xe4 62031d28: [<601cf2dd>] device_release_driver+0x2c/0x40 62031d48: [<601ce0dd>] driver_unbind+0x7d/0xc6 62031d88: [<601cd5d9>] drv_attr_store+0x27/0x29 62031d98: [<60115f61>] sysfs_write_file+0x100/0x14d 62031df8: [<600b737d>] vfs_write+0xcb/0x184 62031e08: [<600b58b8>] filp_close+0x88/0x94 62031e38: [<600b7686>] sys_write+0x59/0x88 62031e88: [<6001ced1>] handle_syscall+0x5d/0x80 62031ea8: [<60030a74>] userspace+0x405/0x531 62031f08: [<600d32cc>] sys_dup+0x0/0x5e 62031f28: [<601b11d6>] strcpy+0x0/0x18 62031f38: [<600be46c>] do_execve+0x10/0x12 62031f48: [<600184c7>] run_init_process+0x43/0x45 62031fd8: [<60019a91>] new_thread_handler+0xba/0xbc Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Cc: stable@kernel.org Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Just a couple of build regression fixes for ASoC fsl stuff. It doesn't look too trivial, but neither intrusive, so hopefully I can avoid your curse..." Hey, Takashi has a good track record, I think he gets a pass.. * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: fsl: fix snd-soc-imx-pcm module build Revert "ASoC: fsl: fix multiple definition of init_module"
-