- 03 2月, 2009 1 次提交
-
-
由 Tony Vroon 提交于
As just pointed out to me, the new tyan model for ALC262 was implemented but not documented. This adds the board to the list, using both its marketing name (Thunder n6650W) and its model number (S2915-E). Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 1月, 2009 2 次提交
-
-
由 Matthew Ranostay 提交于
Some revisions of the 92hd8xxx codec's not supporting port power downs in which the using of it causes capture and also randomly playback streams to not function at all. Thus by disabling it by default and adding a option to enable it manually will fix all issue on current and future revisions. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Gateway T1616 laptop needs EAPD always on while the current STAC9205 code turns off per HP plug. Added a new model "eapd" to keep it on. Reference: Novell bnc#467597 https://bugzilla.novell.com/show_bug.cgi?id=467597Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 1月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 1月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Update models in patch_sigmatel.c, mainly for the last Gateway updates. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 12月, 2008 4 次提交
-
-
由 Takashi Iwai 提交于
Added probe_only module option to hd-audio driver. This option specifies whether the driver creates and initializes the codec-parser after probing. When this option is set, the driver skips the codec parsing and initialization but gives you proc and other accesses. It's useful to see the initial codec state for debugging. The default of this value is off, so the default behavior is as same as before. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The model list is now in HD-Audio-Models.txt. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Split the list of model option values to a separate file, HD-Audio-Models.txt, from ALSA-Configuration.txt. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the model without the jack-detection for some desktops that have really no jack-detection. The recent driver caused regressions regarding the sound output on such machines. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 12月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Some desktops seems to have no HP/mic jack detection on the front panel, which results in the silent output in the recent driver, because the driver mutes the output (to save power) when no plug is detected. This patch adds a new model that disables the jack-detection. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 12月, 2008 3 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
Fixed typos and added a section about codecgraph. Thanks to Vedran Miletić and Daniel T Chen for suggestions. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 12月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Minor typo-fixes and improvements on HD-Audio.txt. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 12月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Updated the information about bug-reporting for HD-audio. Mentioned alsa-info.sh and kernel bugzilla. Removed ALSA BTS address not to flood the unhandled reports any more. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 12月, 2008 2 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The file can be converted to PDF via asciidoc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 11月, 2008 1 次提交
-
-
由 Clemens Ladisch 提交于
Add support for the HT-Omega Claro halo (XT). Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 11月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Check the model type instead of PCI SSID for detection of the mic types on Dell laptops with IDT 92HD73xx codecs. In this way, a new laptop can be tested via model module option. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 11月, 2008 1 次提交
-
-
由 Vincent Petry 提交于
This patch fixes the bug 0004240: ALC888 - Intel HDA - Headphone Controlling. It is made against the 2008-11-23 snapshot. Added Realtek ALC888 model entry for the Fujitsu-Siemens Amilo Xa3530 laptop. It has 4 jacks: HP out, Mic-in, Line-in and Line-out/Side/SPDIF (this one is on the laptop side, the other ones are on the rear). Model detection works. Headphone jack sense works now. Front mic works now, was same as Acer Aspire 4930G. Added channel mode from 2 to 8 channels. In 2ch and 4ch modes, the front is also sent to the Line-out/side jack for convenience instead of just muting the Line-out/side jack like other models do. When using the Mic-in jack as CLFE, the sound is very low (bug?). To work it around, in 6ch mode the CLFE channel is duplicated to the Line-out/side jack because this one has a better amp. Cc: manu@frogged.de Signed-off-by: NVincent Petry <PVince81@yahoo.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 11月, 2008 1 次提交
-
-
由 Wu Fengguang 提交于
Describe what ELD proc interface provides and how to fix incorrect values. Signed-off-by: NWu Fengguang <wfg@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 11月, 2008 4 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mark Brown 提交于
One of the issues with the ASoC v1 API which has been addressed in the ASoC v2 work that Liam Girdwood has done is that the ALSA card provided by ASoC is distributed around the ASoC structures. For example, machine wide data such as the struct snd_card are maintained as part of the CODEC data structure, preventing the use of multiple codecs. This has been addressed by refactoring the data structures so that all the data for the ALSA card is contained in a single structure snd_soc_card which replaces the existing snd_soc_machine and snd_soc_device. Begin the process of backporting this by renaming struct snd_soc_machine to struct snd_soc_card, better reflecting its function and bringing it closer to standard ALSA terminology. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Matthew Ranostay 提交于
Added STAC_DELL_M4_3 quirk for Dell systems, also reorganized the board config switch to assign number of digital muxes, microphones, and SPDIF muxes via the PCI quirk defined. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The changes specific for Samsung laptops seem unapplicable to other hardware models like ASUS. The mic inputs are lost on such hardware by the change 5d5d5f43. This patch adds back the old laptop-eapd model, and create a new model "samsung" for the new one specific to Samsung laptops with automatic mic selection feature. Reference: kernel bugzilla #12070 http://bugzilla.kernel.org/show_bug.cgi?id=12070Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 11月, 2008 1 次提交
-
-
由 Vincent Petry 提交于
Added Realtek ALC888 model entry for the Acer Aspire 4930G laptop that fixes the following features: - internal microphone - heaphone jack sense - channel mode Signed-off-by: NVincent Petry <PVince81@yahoo.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 11月, 2008 2 次提交
-
-
由 Takashi Iwai 提交于
There are actually two variants of ALC268 Acer implementation, one with an analog built-in mic (pin 0x19) and another with a digital mic (pin 0x12). Created a new model, acer-dmic, for the latter case now. So far, all known models are assigned to be analog-mic, according to the BIOS setup. If this doesn't match with the actual case, one needs to try model=acer-dmic, and fix the entry to point ALC268_ACER_DMIC if it works. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Asus V1s series laptops have an ALC660VD with PCI id: 0x1043, 0x1633. 1.) remove the previous behaviour of mapping that to the ALC861VD_LENOVO device. 2.) add a new ALC660VD_V1S device based on ALC861VD_LENOVO, with an added digital out. Signed-off-by: NTristan Aston <astrotris@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 11月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Added a preset model for FSC Amilo with ALC269 codec chip. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 9月, 2008 1 次提交
-
-
由 Eric Miao 提交于
Due to recent patches removing the now deprecated references to {set,reset}_scoop_gpio() and converting them to the generic GPIO API, the references in the documentation also need to be fixed. Signed-off-by: NEric Miao <eric.miao@marvell.com> Cc: Liam Girdwood <lrg@kernel.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 9月, 2008 1 次提交
-
-
由 Clemens Ladisch 提交于
Add support for the Asus Xonar HDAV1.3 and the Xonar HDAV1.3 Deluxe. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
- 04 9月, 2008 1 次提交
-
-
由 Michael Kerrisk 提交于
As noted by Gu Rui in http://bugzilla.kernel.org/show_bug.cgi?id=11444, there is a typo in Documentation/sound/alsa/ALSA-Configuration.txt. After checking the source (sound/pci/hda/hda_intel.c), the report looks correct to me. Signed-off-by: NMichael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 29 8月, 2008 3 次提交
-
-
由 David S. Miller 提交于
No longer used. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hiroshi Miura 提交于
Added the support of Toshiba RX1 laptop with ALC262 codec chip. Related ALSA bug#3386: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3386Signed-off-by: NHiroshi Miura <miurahr@acm.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Added the descriptions of missing model values. Also, fixed the model strings of a few new models to a standard style. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 25 8月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Added the basic support of AD1882A codec chip. It's almost compatible with AD1882, but with a digital mic and some differences in connections. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 15 8月, 2008 2 次提交
-
-
由 Takashi Iwai 提交于
Added the ignore_ctl_error parameter to enable/disable the control-error handling for mixer interfaces. It was a hard-coded ifdef, and now you can change it more easily. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Added the missing description of module parameters of usb-audio driver to ALSA-Configuration.txt. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 14 8月, 2008 1 次提交
-
-
由 Clemens Ladisch 提交于
Add support for the Asus Xonar D1. It is the same as the DX, but without the external power detection. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 8月, 2008 1 次提交
-
-
由 Alexander Beregalov 提交于
ALSA-Configuration.txt: supported cards update Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-