提交 c238b4f4 编写于 作者: T Takashi Iwai

ALSA: hda - Split ALC268 acer model

There are actually two variants of ALC268 Acer implementation, one
with an analog built-in mic (pin 0x19) and another with a digital
mic (pin 0x12).  Created a new model, acer-dmic, for the latter case
now.

So far, all known models are assigned to be analog-mic, according to
the BIOS setup.  If this doesn't match with the actual case, one needs
to try model=acer-dmic, and fix the entry to point ALC268_ACER_DMIC
if it works.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 13c94744
......@@ -844,6 +844,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
3stack 3-stack model
toshiba Toshiba A205
acer Acer laptops
acer-dmic Acer laptops with digital-mic
acer-aspire Acer Aspire One
dell Dell OEM laptops (Vostro 1200)
zepto Zepto laptops
......
......@@ -114,6 +114,7 @@ enum {
ALC268_3ST,
ALC268_TOSHIBA,
ALC268_ACER,
ALC268_ACER_DMIC,
ALC268_ACER_ASPIRE_ONE,
ALC268_DELL,
ALC268_ZEPTO,
......@@ -10714,6 +10715,22 @@ static struct snd_kcontrol_new alc268_acer_mixer[] = {
{ }
};
static struct snd_kcontrol_new alc268_acer_dmic_mixer[] = {
/* output mixer control */
HDA_BIND_VOL("Master Playback Volume", &alc268_acer_bind_master_vol),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
.info = snd_hda_mixer_amp_switch_info,
.get = snd_hda_mixer_amp_switch_get,
.put = alc268_acer_master_sw_put,
.private_value = HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
},
HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
HDA_CODEC_VOLUME("Line In Boost", 0x1a, 0, HDA_INPUT),
{ }
};
static struct hda_verb alc268_acer_aspire_one_verbs[] = {
{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
......@@ -11039,6 +11056,15 @@ static struct hda_input_mux alc268_capture_source = {
};
static struct hda_input_mux alc268_acer_capture_source = {
.num_items = 3,
.items = {
{ "Mic", 0x0 },
{ "Internal Mic", 0x1 },
{ "Line", 0x2 },
},
};
static struct hda_input_mux alc268_acer_dmic_capture_source = {
.num_items = 3,
.items = {
{ "Mic", 0x0 },
......@@ -11322,6 +11348,7 @@ static const char *alc268_models[ALC268_MODEL_LAST] = {
[ALC268_3ST] = "3stack",
[ALC268_TOSHIBA] = "toshiba",
[ALC268_ACER] = "acer",
[ALC268_ACER_DMIC] = "acer-dmic",
[ALC268_ACER_ASPIRE_ONE] = "acer-aspire",
[ALC268_DELL] = "dell",
[ALC268_ZEPTO] = "zepto",
......@@ -11417,6 +11444,23 @@ static struct alc_config_preset alc268_presets[] = {
.unsol_event = alc268_acer_unsol_event,
.init_hook = alc268_acer_init_hook,
},
[ALC268_ACER_DMIC] = {
.mixers = { alc268_acer_dmic_mixer, alc268_capture_alt_mixer,
alc268_beep_mixer },
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_acer_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.dac_nids = alc268_dac_nids,
.num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
.adc_nids = alc268_adc_nids_alt,
.capsrc_nids = alc268_capsrc_nids,
.hp_nid = 0x02,
.num_channel_mode = ARRAY_SIZE(alc268_modes),
.channel_mode = alc268_modes,
.input_mux = &alc268_acer_dmic_capture_source,
.unsol_event = alc268_acer_unsol_event,
.init_hook = alc268_acer_init_hook,
},
[ALC268_ACER_ASPIRE_ONE] = {
.mixers = { alc268_acer_aspire_one_mixer,
alc268_capture_alt_mixer },
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册