Enable the QSPI node and add the flash chip.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Add the QSPI device node for Arria10 SOC.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Enable the qspi controller on the devkit and add the flash chip.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Add a more specific board compatible entry for all of the SOCFPGA
Cyclone 5 based boards.
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
---
v3: Be a bit more specific with the c5 dk and sockit, use
    "altr,socfpga-cyclone5-socdk" and "terasic,socfpga-cyclone5-sockit"
v2: remove extra space and add a comma between compatible entries

Enable the qspi controller on the socrates and add the flash chip.
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Add the qspi node to the socfpga dtsi file.
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Add the LED framework to the Arria10 System Resource chip GPIO hooks.
Signed-off-by: NThor Thayer <tthayer@opensource.altera.com>
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Enable the Altera Arria10 GPIO parent for MFD operation.
Signed-off-by: NThor Thayer <tthayer@opensource.altera.com>
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Add the Altera Arria10 System Resource node. This is a Multi-Function
device with GPIO expander support.
Signed-off-by: NThor Thayer <tthayer@opensource.altera.com>
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Add the Altera Arria10 SPI Master Node in preparation for
the A10SR MFD node.
Signed-off-by: NThor Thayer <tthayer@opensource.altera.com>
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Enable the bit(22) shared-override bit for the SoCFPGA family. While at it,
enable the prefetch-data and prefetch-instr settings for the Arria10.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Add support for board based on the Altera Cyclone V SoC.
This board has the following functions:
    - 1 GiB of DRAM
    - 1 Gigabit ethernet
    - 1 SD card slot
    - 1 USB gadget port
    - QSPI NOR Flash
    - I2C EEPROMs and I2C RTC
    - DVI output
    - Audio port

This commit supports without QSPI, DVI and Audio.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

The board is now manufactured by Aries Embedded GmbH, update compat string.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

The change adds a new device node with description of generic SRAM
on-chip memory found on NXP LPC32xx SoC series and connected to AHB
matrix slave port 3.

Note that NXP LPC3220 SoC has 128KiB of SRAM memory, the other
LPC3230, LPC3240 and LPC3250 SoCs all have 256KiB SRAM space,
in the shared DTSI file this change specifies 128KiB SRAM size.

Also it's worth to mention that the SRAM area contains of 64KiB banks,
2 banks on LPC3220 and 4 banks on the other SoCs from the series, and
all SRAM banks but the first one have independent power controls,
the description of this feature will be added with the introduction of
power domains for the SoC series.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch fixes the following DTC warning with W=1:

"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

This patch fixes the following DTC warning with W=1:

"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

This patch fixes the following DTC warning with W=1:

"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

This patch fixes the following DTC warning with W=1:

"Node /soc has a reg or ranges property, but no unit name"
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

This patch fixes the following DTC warning with W=1:

"Node /soc has a reg or ranges property, but no unit name"
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

This patch fixes the following DTC warning with W=1:

"Node /soc has a reg or ranges property, but no unit name"
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

As noted in [1], "there are a number of problems with skeleton.dtsi,
and it would be prefereable to remove it entirely." This patch is to
remove skeleton.dtsi inclusion from berlin2.

[1] http://www.spinics.net/lists/arm-kernel/msg528080.htmlSigned-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

As noted in [1], "there are a number of problems with skeleton.dtsi,
and it would be prefereable to remove it entirely." This patch is to
remove skeleton.dtsi inclusion from berlin2cd.

[1] http://www.spinics.net/lists/arm-kernel/msg528080.htmlSigned-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

As noted in [1], "there are a number of problems with skeleton.dtsi,
and it would be prefereable to remove it entirely." This patch is to
remove skeleton.dtsi inclusion from berlin2q.

[1] http://www.spinics.net/lists/arm-kernel/msg528080.htmlSigned-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

After commit f29a72c2 ("watchdog: dw_wdt: Convert to use watchdog
infrastructure"), the dw_wdt driver can support multiple variants, so
unconditionally enable all dw_wdt nodes now.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

After commit f29a72c2 ("watchdog: dw_wdt: Convert to use watchdog
infrastructure"), the dw_wdt driver can support multiple variants, so
unconditionally enable all dw_wdt nodes now.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

Enable throttle function for SOC_THERM.
Set "hot" trips for cpu and gpu thermal zones, which
can trigger the SOC_THERM hardware throttle.
Signed-off-by: NWei Ni <wni@nvidia.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

Set general "critical" trip temperatures for cpu, gpu, mem and pllx
thermal zones for all Tegra124 platform, these trips can trigger
shut down or reset.
Tegra124 Jetson TK1 was already set "critical" trips before, so it
can overwrite the general values.
Signed-off-by: NWei Ni <wni@nvidia.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

Use the new sun7i-a20-mmc compatible for the mmc controllers on sun7i
and newer.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Originally-from: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: arnd@arndb.de
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: bruherrera@gmail.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: lee.jones@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474387259-18926-5-git-send-email-alexandre.torgue@st.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Add a dt node describing the mma7660 accelerometer on the
polaroid-mid2407pxe03 tablet.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

UART1 is connected to the bluetooth part of RTL8723BS WiFi/BT combo card
on iNet D978 Rev2 board.

Enable the UART1 to make it possible to use the modified hciattach by
Realtek to drive the BT part of RTL8723BS.

On the board no r_uart pins are found now (the onboard RX/TX pins are
wired to PF2/PF4, which is muxed with mmc0), so also disabled it.
Signed-off-by: NIcenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The UART1 at PG (PG6, PG7, PG8, PG9) is, in the Allwinner's reference
tablet design of A23/33, used to connect to UART Bluetooth cards.

Add the pinmux for it.
Signed-off-by: NIcenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

These peripherals can only be muxed to these pins, so they are
associated in the DTSI instead of the board files. This makes it very
easy to enable them using overlays or u-boot commands:

 => fdt set /soc/i2c@01c2ac00 status okay
Signed-off-by: NJorik Jonker <jorik@kippendief.biz>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

These are the only possible pins for these peripherals according to the
datasheet.
Signed-off-by: NJorik Jonker <jorik@kippendief.biz>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

These H3 boards all expose UART1-3 on their expansion header. Since
other functions can be muxed to these pins, they are explicitly
disabled. To enable them, one could use DT overlays or U-boot commands:

 => fdt set /soc/serial@01c28c00 status okay
Signed-off-by: NJorik Jonker <jorik@kippendief.biz>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

This was done to make UART1-3 on H3 consistent, and less complicated to
enable UART1-3 on the breakout header on the several H3 board (notably
Orange Pi's). This patch adds a bit of complexity for the existing Banana
Pi, which already had the RTS/CTS associated on UART1.

The RTS/CTS for UART2-3 could be defined in the same way, but since
there is no actual use case for them at the moment, they are left out.
Signed-off-by: NJorik Jonker <jorik@kippendief.biz>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

These are the pinmux definitions for UART2-3 on H3. These UARTs can only
be muxed to these pins, so _a and @0 do not really make sense. I have
left out RTS/CTS, since these are rarely used. These can easily be
enabled using an additional pinmux set.
Signed-off-by: NJorik Jonker <jorik@kippendief.biz>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

EHCI1 provides an HSIC interface. This interface is exposed on the
board through two pins among the GPIO header.

With the PHY now powered up and responding, enabling the interface when
nothing is connected results in a lot of error messages:

	usb 2-1: device descriptor read/64, error -71
	usb 2-1: device descriptor read/64, error -71
	usb 2-1: new high-speed USB device number 3 using ehci-platform
	usb 2-1: device descriptor read/64, error -71
	usb 2-1: device descriptor read/64, error -71
	usb 2-1: new high-speed USB device number 4 using ehci-platform
	usb 2-1: device not accepting address 4, error -71
	usb 2-1: new high-speed USB device number 5 using ehci-platform
	usb 2-1: device not accepting address 5, error -71
	usb usb2-port1: unable to enumerate USB device

Disable it by default, but leave the entries in the board DTS.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The AXP806 PMIC is the secondary PMIC. It provides various supply
voltages for the SoC and other peripherals. The PMIC's interrupt
line is connected to NMI pin of the SoC.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The AXP806 PMIC is the secondary PMIC. It provides various supply
voltages for the SoC and other peripherals. The PMIC's interrupt
line is connected to NMI pin of the SoC.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>