There are some texts there on the wrong place. Re-generate it
from the svg file.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Both tables on this rst file were not shown right, as they miss
the proper tag (tabularcolumns) to specify the column widths
required for PDF and LaTeX output.

Also, the second table is too big to fit into one page. So,
it should use the longtable class to allow it to be split into
two pages.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are two tables with a C code-block inside it. Unfortunately,
that causes LaTeX output to break. Yet, there's nothing special
there, so let's remove the code-block from them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Change multi-line note tags to be more symetric, e. g. not starting
the text together witht the tag.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The items at the sound carrier had a bullet. Those are not needed.

So, get rid of them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Somehow, the conversion broke a reference here. Re-add it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

pdflatex doesn't like gif images:
	None:None: WARNING: no matching candidate for image URI u'media/uapi/v4l/pixfmt-nv12mt_files/nv12mt.*'
	None:None: WARNING: no matching candidate for image URI u'media/uapi/v4l/pixfmt-nv12mt_files/nv12mt_example.*'

But it works fine with png. So, convert them. As a plus, PNG images
are smaller.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

add card Hauppauge WinTV-QuadHD-DVB to the list.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

References at the rst files for C functions generated via
kernel-doc should use :c:func:.

Fix it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This struct is mentioned at the kAPI docbook. So, let's document
it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Reorganize the order of the document, putting the chapters
on a more logical order and renaming some sections.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Now that the only remaining chapters at v4l2-framework are
the introduction ones, let' s rename the file.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Move the v4l2 clocks stuff from v4l2-framework to a separate
file and adds an attention that came from the v4l2-clk.h.

Note: as this is meant to be a temporary kAPI, and it is
used only by two drivers (soc_camera and em28xx), where
the first one is in deprecation process, it probably not
a worth effort to document its header.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add cross-references with the kernel-doc functions/structs
and improve the markups.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Move the v4l2_fh specific content from v4l2-framework.rst
to v4l2-fh.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This header file was undocumented. Add documentation for it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Improve events documentation by adding cross references,
sub-titles and other markup elements.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Move the v4l2 event-specific text from v4l2-framework.rst
to v4l2-event.rst. That helps to keep the text together with
the functions it describes, and makes easier to identify
documentation gaps.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

As we merged the videobuf chapter at the kABI section, and it
is a way more complete, just remove the small videobuf chapter
that came from framework.txt.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add cross-references for the functions/structs and add
the markup tags to improve its display.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Move the documentation for video device node creation to
a separate file.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add documentation for v4l2-dev.h, and put it at v4l2-framework.rst,
where struct video_device is currently documented.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The v4l2_subdev reference was using the wrong tag. Fix it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are some subdev-specific functions at v4l2-common.h
that are mentioned at v4l2-subdev.rst.

Document them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The two new sections were missing cross-references, and had
some other minor issues with the markups. Add such things.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are two additional subdev-specific sections at the
v4l2-framework file. Move them to the subdev chapter, in order
to better organize the book.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The Async API is actually part of the v4l2 subdev.
Move its declarations to it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Enrich the subdevice description by linking it to the
functions and structs from v4l2-subdev.h.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are lots of documentation about V4L2 subdevices at
v4l2-framework.rst. Move them to its specific chapter at
v4l2-subdev.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This document describes the main kAPI interfaces for the
v4l2-device.h header. Add cross references to the documentation
produced via kernel-doc.

While here, also use monotonic font for constants.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Part of the contents of v4l2-framework is related to the
kAPI defined by v4l2-device. Move such contents to the
v4l2-device.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Sphinx produce a 1:1 mapping between a rst file and an html file.

So, we need to split the kernel-doc tags on multiple documents.

A side effect is that we're now having a better name for each
section of the kAPI documentation.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The functions at v4l2-device.h are not using the proper
markups. Add it, and include at the v4l2-core.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The kAPI, v4l-drivers and dvb-drivers never used the
GNU FDL license. The addition of such license header were
just due to copy-and-paste. So, let's fix it.

As the media_kapi were part of device-drivers.tmp, it is
under GPL v2+.

The other two books is an agregation of files without any
license explicitly specified. So, they're all bound to the
Kernel's COPYING license. So, they're GPL v2 only.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The uAPI book has 5 parts, but they lost numeration after
conversion to rst. Manually number those parts, and make
the main index with 1 depth, to only show the parts and
the annexes.

At each part, use :maxwidth: 5, in order to show a more
complete index.

While here, fix the cross-references between different
books.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix all remaining media warnings with ReST that are fixable
without changing at the Sphinx code.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Update and expand the CEC documentation. Especially w.r.t. non-blocking
mode.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Sphinx is really evil when an older version finds an extra
attribute for the :toctree: tag: it simply ignores everything
and produce documents without any chapter inside!

As we're now using tags available only on Sphinx 1.4.x, we
need to use some creative ways to add a title before the
table of contents. Do that by using a css class.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The titles at the media books were misleading, and some books
were not numbered.

Rename the kAPI book to better reflect its contents, be more
consistent on the initial rst file for each book and better
name them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

I ended by adding twice each media header, because I saw some
missing stuff at the documents. It seems it was my mistake,
as everything seems to be there.

So, remove those extra stuff, to avoid duplicating the
documentation of the functions.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>