This commit applies some warning-omission micro-optimizations to RCU's
various extended-quiescent-state functions, which are on the kernel/user
hotpath for CONFIG_NO_HZ_FULL=y.
Reported-by: NRik van Riel <riel@redhat.com>
Reported by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Currently, Kconfig will ask the user whether TASKS_RCU should be set.
This is silly because Kconfig already has all the information that it
needs to set this parameter.  This commit therefore directly drives
the value of TASKS_RCU via "select" statements.  Which means that
as subsystems require TASKS_RCU, those subsystems will need to add
"select" statements of their own.
Reported-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: NPranith Kumar <bobby.prani@gmail.com>

Grace-period scans of the rcu_node combining tree normally
proceed quite quickly, so that it is very difficult to reproduce
races against them.  This commit therefore allows grace-period
pre-initialization and cleanup to be artificially slowed down,
increasing race-reproduction probability.  A pair of pairs of new
Kconfig parameters are provided, RCU_TORTURE_TEST_SLOW_PREINIT to
enable the slowing down of propagating CPU-hotplug changes up the
combining tree along with RCU_TORTURE_TEST_SLOW_PREINIT_DELAY to
specify the delay in jiffies, and RCU_TORTURE_TEST_SLOW_CLEANUP
to enable the slowing down of the end-of-grace-period cleanup scan
along with RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY to specify the delay
in jiffies.  Boot-time parameters named rcutree.gp_preinit_delay and
rcutree.gp_cleanup_delay allow these delays to be specified at boot time.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

In a misguided attempt to avoid an #ifdef, the use of the
gp_init_delay module parameter was conditioned on the corresponding
RCU_TORTURE_TEST_SLOW_INIT Kconfig variable, using IS_ENABLED() at
the point of use in the code.  This meant that the compiler always saw
the delay, which meant that RCU_TORTURE_TEST_SLOW_INIT_DELAY had to be
unconditionally defined.  This in turn caused "make oldconfig" to ask
pointless questions about the value of RCU_TORTURE_TEST_SLOW_INIT_DELAY
in cases where it was not even used.

This commit avoids these pointless questions by defining gp_init_delay
under #ifdef.  In one branch, gp_init_delay is initialized to
RCU_TORTURE_TEST_SLOW_INIT_DELAY and is also a module parameter (thus
allowing boot-time modification), and in the other branch gp_init_delay
is a const variable initialized by default to zero.

This approach also simplifies the code at the delay point by eliminating
the IS_DEFINED().  Because gp_init_delay is constant zero in the no-delay
case intended for production use, the "gp_init_delay > 0" check causes
the delay to become dead code, as desired in this case.  In addition,
this commit replaces magic constant "10" with the preprocessor variable
PER_RCU_NODE_PERIOD, which controls the number of grace periods that
are allowed to elapse at full speed before a delay is inserted.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Additional test patterns for memtest were introduced since commit
63823126 ("x86: memtest: add additional (regular) test patterns"),
but looks like Kconfig was not updated that time.

Update Kconfig entry with the actual number of maximum test patterns.
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memtest is a simple feature which fills the memory with a given set of
patterns and validates memory contents, if bad memory regions is detected
it reserves them via memblock API.  Since memblock API is widely used by
other architectures this feature can be enabled outside of x86 world.

This patch set promotes memtest to live under generic mm umbrella and
enables memtest feature for arm/arm64.

It was reported that this patch set was useful for tracking down an issue
with some errant DMA on an arm64 platform.

This patch (of 6):

There is nothing platform dependent in the core memtest code, so other
platforms might benefit from this feature too.

[linux@roeck-us.net: MEMTEST depends on MEMBLOCK]
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recently there's been requests for better sanity
checking in the time code, so that it's more clear
when something is going wrong, since timekeeping issues
could manifest in a large number of strange ways in
various subsystems.

Thus, this patch adds some extra infrastructure to
add a check to update_wall_time() to print two new
warnings:

 1) if we see the call delayed beyond the 'max_cycles'
    overflow point,

 2) or if we see the call delayed beyond the clocksource's
    'max_idle_ns' value, which is currently 50% of the
    overflow point.

This extra infrastructure is conditional on
a new CONFIG_DEBUG_TIMEKEEPING option, also
added in this patch - default off.

Tested this a bit by halting qemu for specified
lengths of time to trigger the warnings.
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-5-git-send-email-john.stultz@linaro.org
[ Improved the changelog and the messages a bit. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Given that CPU-hotplug events are now applied only at the starts of
grace periods, it makes sense to unconditionally enable slow grace-period
initialization for rcutorture testing.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Grace-period initialization normally proceeds quite quickly, so
that it is very difficult to reproduce races against grace-period
initialization.  This commit therefore allows grace-period
initialization to be artificially slowed down, increasing
race-reproduction probability.  A pair of new Kconfig parameters are
provided, CONFIG_RCU_TORTURE_TEST_SLOW_INIT to enable the slowdowns, and
CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY to specify the number of jiffies
of slowdown to apply.  A boot-time parameter named rcutree.gp_init_delay
allows boot-time delay to be specified.  By default, no delay will be
applied even if CONFIG_RCU_TORTURE_TEST_SLOW_INIT is set.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

In the past, it has been useful to enable PROVE_LOCKING without also
enabling PROVE_RCU.  However, experience with PROVE_RCU over the past
few years has demonstrated its usefulness, so this commit makes
PROVE_LOCKING directly imply PROVE_RCU.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

This provides the basic infrastructure to load kernel-specific python
helper scripts when debugging the kernel in gdb.

The loading mechanism is based on gdb loading for <objfile>-gdb.py when
opening <objfile>.  Therefore, this places a corresponding link to the
main helper script into the output directory that contains vmlinux.

The main scripts will pull in submodules containing Linux specific gdb
commands and functions.  To avoid polluting the source directory with
compiled python modules, we link to them from the object directory.

Due to gdb.parse_and_eval and string redirection for gdb.execute, we
depend on gdb >= 7.2.

This feature is enabled via CONFIG_GDB_SCRIPTS.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Acked-by: Michal Marek <mmarek@suse.cz>		[kbuild stuff]
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kernel Address sanitizer (KASan) is a dynamic memory error detector.  It
provides fast and comprehensive solution for finding use-after-free and
out-of-bounds bugs.

KASAN uses compile-time instrumentation for checking every memory access,
therefore GCC > v4.9.2 required.  v4.9.2 almost works, but has issues with
putting symbol aliases into the wrong section, which breaks kasan
instrumentation of globals.

This patch only adds infrastructure for kernel address sanitizer.  It's
not available for use yet.  The idea and some code was borrowed from [1].

Basic idea:

The main idea of KASAN is to use shadow memory to record whether each byte
of memory is safe to access or not, and use compiler's instrumentation to
check the shadow memory on each memory access.

Address sanitizer uses 1/8 of the memory addressable in kernel for shadow
memory and uses direct mapping with a scale and offset to translate a
memory address to its corresponding shadow address.

Here is function to translate address to corresponding shadow address:

     unsigned long kasan_mem_to_shadow(unsigned long addr)
     {
                return (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET;
     }

where KASAN_SHADOW_SCALE_SHIFT = 3.

So for every 8 bytes there is one corresponding byte of shadow memory.
The following encoding used for each shadow byte: 0 means that all 8 bytes
of the corresponding memory region are valid for access; k (1 <= k <= 7)
means that the first k bytes are valid for access, and other (8 - k) bytes
are not; Any negative value indicates that the entire 8-bytes are
inaccessible.  Different negative values used to distinguish between
different kinds of inaccessible memory (redzones, freed memory) (see
mm/kasan/kasan.h).

To be able to detect accesses to bad memory we need a special compiler.
Such compiler inserts a specific function calls (__asan_load*(addr),
__asan_store*(addr)) before each memory access of size 1, 2, 4, 8 or 16.

These functions check whether memory region is valid to access or not by
checking corresponding shadow memory.  If access is not valid an error
printed.

Historical background of the address sanitizer from Dmitry Vyukov:

	"We've developed the set of tools, AddressSanitizer (Asan),
	ThreadSanitizer and MemorySanitizer, for user space. We actively use
	them for testing inside of Google (continuous testing, fuzzing,
	running prod services). To date the tools have found more than 10'000
	scary bugs in Chromium, Google internal codebase and various
	open-source projects (Firefox, OpenSSL, gcc, clang, ffmpeg, MySQL and
	lots of others): [2] [3] [4].
	The tools are part of both gcc and clang compilers.

	We have not yet done massive testing under the Kernel AddressSanitizer
	(it's kind of chicken and egg problem, you need it to be upstream to
	start applying it extensively). To date it has found about 50 bugs.
	Bugs that we've found in upstream kernel are listed in [5].
	We've also found ~20 bugs in out internal version of the kernel. Also
	people from Samsung and Oracle have found some.

	[...]

	As others noted, the main feature of AddressSanitizer is its
	performance due to inline compiler instrumentation and simple linear
	shadow memory. User-space Asan has ~2x slowdown on computational
	programs and ~2x memory consumption increase. Taking into account that
	kernel usually consumes only small fraction of CPU and memory when
	running real user-space programs, I would expect that kernel Asan will
	have ~10-30% slowdown and similar memory consumption increase (when we
	finish all tuning).

	I agree that Asan can well replace kmemcheck. We have plans to start
	working on Kernel MemorySanitizer that finds uses of unitialized
	memory. Asan+Msan will provide feature-parity with kmemcheck. As
	others noted, Asan will unlikely replace debug slab and pagealloc that
	can be enabled at runtime. Asan uses compiler instrumentation, so even
	if it is disabled, it still incurs visible overheads.

	Asan technology is easily portable to other architectures. Compiler
	instrumentation is fully portable. Runtime has some arch-dependent
	parts like shadow mapping and atomic operation interception. They are
	relatively easy to port."

Comparison with other debugging features:
========================================

KMEMCHECK:

  - KASan can do almost everything that kmemcheck can.  KASan uses
    compile-time instrumentation, which makes it significantly faster than
    kmemcheck.  The only advantage of kmemcheck over KASan is detection of
    uninitialized memory reads.

    Some brief performance testing showed that kasan could be
    x500-x600 times faster than kmemcheck:

$ netperf -l 30
		MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost (127.0.0.1) port 0 AF_INET
		Recv   Send    Send
		Socket Socket  Message  Elapsed
		Size   Size    Size     Time     Throughput
		bytes  bytes   bytes    secs.    10^6bits/sec

no debug:	87380  16384  16384    30.00    41624.72

kasan inline:	87380  16384  16384    30.00    12870.54

kasan outline:	87380  16384  16384    30.00    10586.39

kmemcheck: 	87380  16384  16384    30.03      20.23

  - Also kmemcheck couldn't work on several CPUs.  It always sets
    number of CPUs to 1.  KASan doesn't have such limitation.

DEBUG_PAGEALLOC:
	- KASan is slower than DEBUG_PAGEALLOC, but KASan works on sub-page
	  granularity level, so it able to find more bugs.

SLUB_DEBUG (poisoning, redzones):
	- SLUB_DEBUG has lower overhead than KASan.

	- SLUB_DEBUG in most cases are not able to detect bad reads,
	  KASan able to detect both reads and writes.

	- In some cases (e.g. redzone overwritten) SLUB_DEBUG detect
	  bugs only on allocation/freeing of object. KASan catch
	  bugs right before it will happen, so we always know exact
	  place of first bad read/write.

[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel
[2] https://code.google.com/p/address-sanitizer/wiki/FoundBugs
[3] https://code.google.com/p/thread-sanitizer/wiki/FoundBugs
[4] https://code.google.com/p/memory-sanitizer/wiki/FoundBugs
[5] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel#Trophies

Based on work by Andrey Konovalov.
Signed-off-by: NAndrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NAndrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Test different scenarios of function calls located in lib/hexdump.c.

Currently hex_dump_to_buffer() is only tested and test data is provided
for little endian CPUs.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow the selftest on the resizable hash table to be built modular, just
like all other tests that do not depend on DEBUG_KERNEL.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Grepping for "archicture" showed it actually twice! Most unusual
spelling error, very interesting. :)
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The RCU_CPU_STALL_INFO code has been in for quite some time, and has
proven reliable.  This commit therefore enables it by default.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

SRCU is not necessary to be compiled by default in all cases. For tinification
efforts not compiling SRCU unless necessary is desirable.

The current patch tries to make compiling SRCU optional by introducing a new
Kconfig option CONFIG_SRCU which is selected when any of the components making
use of SRCU are selected.

If we do not select CONFIG_SRCU, srcu.o will not be compiled at all.

   text    data     bss     dec     hex filename
   2007       0       0    2007     7d7 kernel/rcu/srcu.o

Size of arch/powerpc/boot/zImage changes from

   text    data     bss     dec     hex filename
 831552   64180   23944  919676   e087c arch/powerpc/boot/zImage : before
 829504   64180   23952  917636   e0084 arch/powerpc/boot/zImage : after

so the savings are about ~2000 bytes.
Signed-off-by: NPranith Kumar <bobby.prani@gmail.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]

This is the page owner tracking code which is introduced so far ago.  It
is resident on Andrew's tree, though, nobody tried to upstream so it
remain as is.  Our company uses this feature actively to debug memory leak
or to find a memory hogger so I decide to upstream this feature.

This functionality help us to know who allocates the page.  When
allocating a page, we store some information about allocation in extra
memory.  Later, if we need to know status of all pages, we can get and
analyze it from this stored information.

In previous version of this feature, extra memory is statically defined in
struct page, but, in this version, extra memory is allocated outside of
struct page.  It enables us to turn on/off this feature at boottime
without considerable memory waste.

Although we already have tracepoint for tracing page allocation/free,
using it to analyze page owner is rather complex.  We need to enlarge the
trace buffer for preventing overlapping until userspace program launched.
And, launched program continually dump out the trace buffer for later
analysis and it would change system behaviour with more possibility rather
than just keeping it in memory, so bad for debug.

Moreover, we can use page_owner feature further for various purposes.  For
example, we can use it for fragmentation statistics implemented in this
patch.  And, I also plan to implement some CMA failure debugging feature
using this interface.

I'd like to give the credit for all developers contributed this feature,
but, it's not easy because I don't know exact history.  Sorry about that.
Below is people who has "Signed-off-by" in the patches in Andrew's tree.

Contributor:
Alexander Nyberg <alexn@dsv.su.se>
Mel Gorman <mgorman@suse.de>
Dave Hansen <dave@linux.vnet.ibm.com>
Minchan Kim <minchan@kernel.org>
Michal Nazarewicz <mina86@mina86.com>
Andrew Morton <akpm@linux-foundation.org>
Jungsoo Son <jungsoo.son@lge.com>
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PREEMPT_RCU and TREE_PREEMPT_RCU serve the same function after
TINY_PREEMPT_RCU has been removed. This patch removes TREE_PREEMPT_RCU
and uses PREEMPT_RCU config option in its place.
Signed-off-by: NPranith Kumar <bobby.prani@gmail.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The CONFIG_RCU_CPU_STALL_VERBOSE Kconfig parameter causes preemptible
RCU's CPU stall warnings to dump out any preempted tasks that are blocking
the current RCU grace period.  This information is useful, and the default
has been CONFIG_RCU_CPU_STALL_VERBOSE=y for some years.  It is therefore
time for this commit to remove this Kconfig parameter, so that future
kernel builds will always act as if CONFIG_RCU_CPU_STALL_VERBOSE=y.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The "_MODULE" suffix is reserved for tristates compiled as loadable kernel
modules (LKM).  The "TEST_MODULE" feature thereby violates this
convention.  The feature is used to compile the lib/test_module.c kernel
module.

Sadly this convention is not made explicit, but the Kconfig code documents
it.  The following code (./scripts/kconfig/confdata.c) is used to generate
the autoconf.h header file during the build process.  When a feature is
selected as a kernel module ('m'), it is suffixed with "_MODULE" to
indicate it.

	switch (*value) {
	case 'n':
		break;
	case 'm':
		suffix = "_MODULE";
		/* fall through */

This causes problems for static code analysis, which assumes a consistent
use of the "_MODULE" suffix.

This patch renames the feature and its reference in a Makefile to
"TEST_LKM", which still expresses the test of a LKM.
Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

1.
the library includes a trivial set of BPF syscall wrappers:
int bpf_create_map(int key_size, int value_size, int max_entries);
int bpf_update_elem(int fd, void *key, void *value);
int bpf_lookup_elem(int fd, void *key, void *value);
int bpf_delete_elem(int fd, void *key);
int bpf_get_next_key(int fd, void *key, void *next_key);
int bpf_prog_load(enum bpf_prog_type prog_type,
		  const struct sock_filter_int *insns, int insn_len,
		  const char *license);
bpf_prog_load() stores verifier log into global bpf_log_buf[] array

and BPF_*() macros to build instructions

2.
test stubs configure eBPF infra with 'unspec' map and program types.
These are fake types used by user space testsuite only.

3.
verifier tests valid and invalid programs and expects predefined
error log messages from kernel.
40 tests so far.

$ sudo ./test_verifier
 #0 add+sub+mul OK
 #1 unreachable OK
 #2 unreachable2 OK
 #3 out of range jump OK
 #4 out of range jump2 OK
 #5 test1 ld_imm64 OK
 ...
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently in the event of a stack overrun a call to schedule()
does not check for this type of corruption. This corruption is
often silent and can go unnoticed. However once the corrupted
region is examined at a later stage, the outcome is undefined
and often results in a sporadic page fault which cannot be
handled.

This patch checks for a stack overrun and takes appropriate
action since the damage is already done, there is no point
in continuing.
Signed-off-by: NAaron Tomlin <atomlin@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: aneesh.kumar@linux.vnet.ibm.com
Cc: dzickus@redhat.com
Cc: bmr@redhat.com
Cc: jcastillo@redhat.com
Cc: oleg@redhat.com
Cc: riel@redhat.com
Cc: prarit@redhat.com
Cc: jgh@redhat.com
Cc: minchan@kernel.org
Cc: mpe@ellerman.id.au
Cc: tglx@linutronix.de
Cc: rostedt@goodmis.org
Cc: hannes@cmpxchg.org
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1410527779-8133-4-git-send-email-atomlin@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

I was puzzled why /proc/$$/stack had disappeared, until I figured out I
had disabled the last debug option that did a 'select STACKTRACE'.  This
patch makes the option show up at config time, so it can be enabled
without enabling any of the more heavyweight debug options.
Signed-off-by: NDave Jones <davej@redhat.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We really don't want distro's enabling this in their kernels.  Try and
make that more clear.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Specifically:
  Documentation/locking/lockdep-design.txt
  Documentation/locking/lockstat.txt
  Documentation/locking/mutex-design.txt
  Documentation/locking/rt-mutex-design.txt
  Documentation/locking/rt-mutex.txt
  Documentation/locking/spinlocks.txt
  Documentation/locking/ww-mutex-design.txt
Signed-off-by: NDavidlohr Bueso <davidlohr@hp.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: jason.low2@hp.com
Cc: aswin@hp.com
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Mason <clm@fb.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: fengguang.wu@intel.com
Link: http://lkml.kernel.org/r/1406752916-3341-6-git-send-email-davidlohr@hp.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit a8fe19eb ("kernel/printk: use symbolic defines for console
loglevels") makes consistent use of symbolic values for printk() log
levels.

The naming scheme used is different from the one used for
DEFAULT_MESSAGE_LOGLEVEL though.  Change that symbol name to be
MESSAGE_LOGLEVEL_DEFAULT for consistency.  And because the value of that
symbol comes from a similarly-named config option, rename
CONFIG_DEFAULT_MESSAGE_LOGLEVEL as well.
Signed-off-by: NAlex Elder <elder@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Generic implementation of a resizable, scalable, concurrent hash table
based on [0]. The implementation supports both, fixed size keys specified
via an offset and length, or arbitrary keys via own hash and compare
functions.

Lookups are lockless and protected as RCU read side critical sections.
Automatic growing/shrinking based on user configurable watermarks is
available while allowing concurrent lookups to take place.

Objects to be hashed must include a struct rhash_head. The reason for not
using the existing struct hlist_head is that the expansion and shrinking
will have two buckets point to a single entry which would lead in obscure
reverse chaining behaviour.

Code includes a boot selftest if CONFIG_TEST_RHASHTABLE is defined.

[0] https://www.usenix.org/legacy/event/atc11/tech/final_files/Triplett.pdfSigned-off-by: NThomas Graf <tgraf@suug.ch>
Reviewed-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I found that a lot of unresolvable variables when using gdb on the
kernel become resolvable when dwarf4 is enabled. So add a Kconfig flag
to enable it.

It definitely increases the debug information size, but on the other
hand this isn't so bad when debug fusion is used.

v2: Use cc-option
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This is an alternative approach to lower the overhead of debug info
(as we discussed a few days ago)

gcc 4.7+ and newer binutils have a new "split debug info" debug info
model where the debug info is only written once into central ".dwo" files.

This avoids having to copy it around multiple times, from the object
files to the final executable. It lowers the disk space
requirements. In addition it defaults to compressed debug data.

More details here: http://gcc.gnu.org/wiki/DebugFission

This patch adds a new option to enable it. It has to be an option,
because it'll undoubtedly break everyone's debuginfo packaging scheme.
gdb/objdump/etc. all still work, if you have new enough versions.

I don't see big compile wins (maybe a second or two faster or so), but the
object dirs with debuginfo get significantly smaller. My standard kernel
config (slightly bigger than defconfig) shrinks from 2.9G disk space
to 1.1G objdir (with non reduced debuginfo). I presume if you are IO limited
the compile time difference will be larger.

Only problem I've seen so far is that it doesn't play well with older
versions of ccache (apparently fixed, see
https://bugzilla.samba.org/show_bug.cgi?id=10005)

v2: various fixes from Dirk Gouders. Improve commit message slightly.
v3: Fix clean rules and improve Kconfig slightly
v4: Fix merge error in last version (Sam Ravnborg)
    Clarify description that it mainly helps disk size.
Cc: Dirk Gouders <dirk@gouders.net>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Create a module that allows udelay() to be executed to ensure that
it is delaying at least as long as requested (with a little bit of
error allowed).

There are some configurations which don't have reliably udelay
due to using a loop delay with cpufreq changes which should use
a counter time based delay instead.  This test aims to identify
those configurations where timing is unreliable.
Signed-off-by: NDavid Riley <davidriley@chromium.org>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

This provides a simple interface to trigger the firmware_class loader
to test built-in, filesystem, and user helper modes. Additionally adds
tests via the new interface to the selftests tree.
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The CONFIG_PROVE_RCU_DELAY Kconfig parameter doesn't appear to be very
effective at finding race conditions, so this commit removes it.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
[ paulmck: Remove definition and uses as noted by Paul Bolle. ]

The related warning:

  scripts/kconfig/conf --allmodconfig Kconfig
  warning: (FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && KMEMCHECK && LOCKDEP) selects FRAME_POINTER which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH || BLACKFIN || MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS)
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It has been broken for quite some time. Just the recent updates made
it compile time broken. Make it depend on BROKEN instead of removing
it right away as we want a proper replacement.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Change CONFIG_DEBUG_PI_LIST to be user-selectable, and add a title and
description.  Remove the dependency on DEBUG_RT_MUTEXES since they were
changed to use rbtrees, and there are other users of plists now.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce a CONFIG_DEBUG_VM_VMACACHE option to enable counting the cache
hit rate -- exported in /proc/vmstat.

Any updates to the caching scheme needs this kind of data, thus it can
save some work re-implementing the counting all the time.
Signed-off-by: NDavidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix build when CONFIG_NET is not enabled.
Fixes these build errors:

WARNING: "sk_unattached_filter_destroy" [lib/test_bpf.ko] undefined!
WARNING: "kfree_skb" [lib/test_bpf.ko] undefined!
WARNING: "sk_unattached_filter_create" [lib/test_bpf.ko] undefined!
WARNING: "sk_run_filter_int_skb" [lib/test_bpf.ko] undefined!
WARNING: "__alloc_skb" [lib/test_bpf.ko] undefined!
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The testsuite covers classic and internal BPF instructions.
It is particularly useful for JIT compiler developers.
Adds to "net" selftest target.

The testsuite can be used as a set of micro-benchmarks.
It measures execution time of each BPF program in nsec.

This patch adds core framework.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>