- 21 5月, 2014 4 次提交
-
-
由 Mitch Williams 提交于
On some architectures, this header must be explicitly included. Change-ID: I4bc2eb0531956a7b676489f79d347d55cfe12421 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Adding the appropriate GNU General Public License header and update copyright year to 2014. Change-ID: I769dd2d37d70350afd0c8727ae2859c0fd340361 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
Remove the defines for PCI bus info that are never used. Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Minor changes to the AdminQ interface to bring it up-to-date. Change-ID: Ie31a4cc4911b2d9d3b7f9af2e56fb0ae674f6345 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NKevin Scott <kevin.c.scott@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 14 5月, 2014 1 次提交
-
-
由 Wilfried Klaebe 提交于
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: NDave Miller <davem@davemloft.net> Signed-off-by: NWilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 5月, 2014 4 次提交
-
-
由 David Ertman 提交于
It has been determined that the workaround of putting the PHY into MDIO slow mode to access the PHY id is not necessary with Lynx Point and newer parts. The issue that necessitated the workaround has been fixed on the newer hardware. We will maintains, as a last ditch attempt, the conversion to MDIO Slow Mode in the failure branch when attempting to access the PHY id so as to cover all contingencies. Signed-off-by: NDave Ertman <davidx.m.ertman@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 David Ertman 提交于
Several customers have reported a link flap issue on 82579. The symptoms are random and intermittent link losses when 82579 is connected to specific link partners. Issue has been root caused as interoperability problem between 82579 and at least some Broadcom PHYs in the Energy Efficient Ethernet wake mechanism. To fix the issue, we are disabling the Phase Locked Loop shutdown in 100M Low Power Idle. This solution will cause an increase of power in 100M EEE link. It will cost additional 28mW in this specific mode. Cc: Lukasz Adamczuk <lukasz.adamczuk@intel.com> Signed-off-by: NDave Ertman <davidx.m.ertman@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 David Ertman 提交于
In commit 772d05c5 "e1000e: slow performance between two 82579 connected via 10Mbit hub", a workaround was put into place to address the overaggressive transmit behavior of 82579 parts when connecting at 10Mbs half-duplex. This same behavior is seen on i217 and i218 parts as well. This patch expands the original workaround to encompass these parts. Signed-off-by: NDave Ertman <davidx.m.ertman@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 David Ertman 提交于
This is a workaround for a HW erratum on 82579 devices. Erratum is #23 in Intel 6 Series Chipset and Intel C200 Series Chipset specification Update June 2013. Problem: 82579 parts experience packet loss in Gig and 100 speeds when interconnect between PHY and MAC is exiting K1 power saving state. This was previously believed to only affect 1Gig speed, but has been observed at 100Mbs also. Workaround: Disable K1 for 82579 devices at Gig and 100 speeds. Signed-off-by: NDave Ertman <davidx.m.ertman@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 28 4月, 2014 15 次提交
-
-
由 Catherine Sullivan 提交于
Bump i40e to 0.3.46 and i40evf to 0.9.23. Change-ID: Ia604ae6d513d9aaa8bfdac79665d9a3a72507df7 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Neerav Parikh 提交于
Some information returned via "Get Link Status" command was not being cached in the struct i40e_link_status. Add this so the driver can utilize this information as needed. Change-ID: If084a0ae2a63b16b97572196b993742af2c67772 Signed-off-by: NNeerav Parikh <neerav.parikh@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kevin Scott 提交于
Change the formal parameters to remove argument which is no longer used. Change-ID: I493b56eba74a1f396fa1b7d24c0a4acbe536b5bf Signed-off-by: NKevin Scott <kevin.c.scott@intel.com> Acked-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Ethtool -k/-K can handle this so we do not need it in debugfs. Change-ID: I9df692f10a60b71805f8f48d3b87c7da3820b2aa Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Although NTUPLE feature control is disabled by default, do not allow user to be able to change it. Change-ID: I4c3f95fb6dbc56b1b6cc47116ea1f72de02bc99c Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kevin Scott 提交于
Change the variable type to avoid compiler warning about int to u16 possible data truncation. Change-ID: I5eb3b578c86513c9625ca32d2f0b57cc01d7dc98 Signed-off-by: NKevin Scott <kevin.c.scott@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Acked-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
If the PF driver fails or is removed from the host, the VF driver will fill up its log with this message. Change-ID: I67045f987f7c0d444d21ded403adc509343cdb8f Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Fix a panic that would occur in the VF if the PF driver failed or was removed from the host kernel. In this case, the VF driver calls i40evf_close(), but this function does nothing because the driver is in the resetting state. Because of this, the driver doesn't free its irqs and causes a kernel panic when it tries to disable MSI-X. Change-ID: If95644a89e554b4d7be0dca1b6add26f63047129 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Neerav Parikh 提交于
In case of any AQ command to query port's DCB configuration fails during driver's probe time; the probe fails and returns an error. This patch prevents this issue by continuing the driver probe even when an error is returned. Also, added an error message to dump the AQ error status to show what error caused the failure to get the DCB configuration from firmware. Change-ID: Ifd5663512588bca684069bb7d4fb586dd72221af Signed-off-by: NNeerav Parikh <Neerav.Parikh@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Neerav Parikh 提交于
The queue vectors are originally distributed among the total number of queues that are configured for a given VSI. The number of queues that are configured for a VSI depends on the number of TCs that are enabled for the VSI at VSI setup/creation time. But, the total number of queues that are configured for a VSI may change based on change in the total number of TCs enabled as a result of change in DCB configuration based on DCBX. Hence, it is required for the queue vectors to be redistributed when the total queues that are configured for a given VSI changes. Without redistributing the vectors the queues that are configured for the newly enabled TCs may not be able to do any Tx/Rx. Change-ID: I4e780903db019e6199c7ce43627cef22c916acfe Signed-off-by: NNeerav Parikh <Neerav.Parikh@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The driver version string was added to this struct to be passed down through the firmware to low-level NC-SI functions. We tell the firmware about the length of the ASCII string not counting any terminating null. Change-ID: I09ac98ff9b869e8661c55fc6a5c98808fc280c91 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NAnjali Singhai <anjali.singhai@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
The function to set the VF MAC address was not taking the port VLAN filter into account when setting/clearing/resetting the VF's host administered MAC address. Be sure to use the port VLAN for VF MAC filtering configurations. Change-ID: I12595331981c79529738f041dcdbdb667ef8f5e6 Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch A Williams 提交于
Add support for getting and setting RSS hashing options, RSS LUT entries, and getting the number of device channels from ethtool. Because the LUT is so small for the VFs, we just read and write the device registers directly instead of maintaining a shadow copy. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
We were already taking care to retain the MAC filter list when deleting a port VLAN. Take some additional care to retain the MAC filter list when changing a port VLAN. Change-ID: Iacf9599ea24ecb4dca8e419aacaf4b58ca361a9c Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
This patch removes the unnecessary ptp_tx_work item. It conflicts with the interrupt-based handler, and will cause spurious warning messages to be displayed in the kernel log. Since the hardware can properly trigger an interrupt, we do not need to poll for an available timestamp in a work queue any more. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 27 4月, 2014 1 次提交
-
-
由 Jacob Keller 提交于
This patch fixes the PTP Tx timestamp interrupt handler. The original code misinterpreted the interrupt handler design. We were clearing the ena_mask bit for the Timesync interrupts. This is done to indicate that the interrupt will be handled in a scheduled work item (instead of immediately) and that work item is responsible for re-enabling the interrupts. However, the Tx timestamp was being handled immediately and nothing was ever re-enabling it. This resulted in a single interrupt working for the life of the driver. This patch fixes the issue by instead clearing the bit from icr0 which is used to indicate that the interrupt was immediately handled and can be re-enabled right away. This patch also clears up a related issue due to writing the PRTTSYN_STAT_0 register, which was unintentionally clearing the cause bits for Timesync interrupts. Change-ID: I057bd70d53c302f60fab78246989cbdfa469d83b Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Acked-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Acked-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 4月, 2014 13 次提交
-
-
由 Carolyn Wyborny 提交于
This patch fixes issue found by updated coccicheck. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes issues found by updated coccicheck. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes WARNING:AVOID_EXTERNS found by checkpatch file check. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch changes implementation to remove use of DEFINE_PCI_DEVICE_TABLE. This patch fixes WARNING:DEFINE_PCI_DEVICE_TABLE Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes ERROR:INITIALISED_STATIC from checkpatch file check. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes WARNING:MSLEEP found by checkpatch check. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes WARNING:LONG_LINE found with checkpatch check. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes ERROR:RETURN_PARENTHESES from checkpatch file check. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes WARNING:MISSING_BREAK found with checkpatch check. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes ERROR:ASSIGN_IN_IF found with checkpatch file check. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes WARNING:NETWORKING_BLOCK_COMMENT_STYLE from checkpatch file check. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes WARNING:TRAILING_STATEMENT from checkpatch file check. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes ERROR:POINTER_LOCATION from checkpatch file check. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 23 4月, 2014 2 次提交
-
-
由 Mitch Williams 提交于
Although the driver would correctly allow the VF link state to be controlled by 'ip set link', it would not report it correctly back. Fix this by filling out the appropriate field in the vf info struct. Change-ID: I58d8e356438190e1ee9660b424301af6f416cdbe Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch fixes WARNING:LEADING_SPACE, WARNING:SPACING, ERROR:SPACING, WARNING:SPACE_BEFORE_TAB and ERROR_CODE_INDENT from checkpatch file check. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-