igb: Cleanups to fix missing break in switch statements

This patch fixes WARNING:MISSING_BREAK found with checkpatch check.
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/igb/e1000_i210.c

@@ -432,6 +432,7 @@ static s32 igb_read_invm_i210(struct e1000_hw *hw, u16 offset,
 			*data = ID_LED_RESERVED_FFFF;
 			ret_val = E1000_SUCCESS;
 		}
+		break;
 	case NVM_SUB_DEV_ID:
 		*data = hw->subsystem_device_id;
 		break;

drivers/net/ethernet/intel/igb/igb_ethtool.c

@@ -2412,9 +2412,11 @@ static int igb_get_rss_hash_opts(struct igb_adapter *adapter,
 	switch (cmd->flow_type) {
 	case TCP_V4_FLOW:
 		cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+		/* Fall through */
 	case UDP_V4_FLOW:
 		if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP)
 			cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+		/* Fall through */
 	case SCTP_V4_FLOW:
 	case AH_ESP_V4_FLOW:
 	case AH_V4_FLOW:
@@ -2424,9 +2426,11 @@ static int igb_get_rss_hash_opts(struct igb_adapter *adapter,
 		break;
 	case TCP_V6_FLOW:
 		cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+		/* Fall through */
 	case UDP_V6_FLOW:
 		if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP)
 			cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+		/* Fall through */
 	case SCTP_V6_FLOW:
 	case AH_ESP_V6_FLOW:
 	case AH_V6_FLOW:

drivers/net/ethernet/intel/igb/igb_main.c

@@ -726,12 +726,14 @@ static void igb_cache_ring_register(struct igb_adapter *adapter)
 				adapter->rx_ring[i]->reg_idx = rbase_offset +
 							       Q_IDX_82576(i);
 		}
+		/* Fall through */
 	case e1000_82575:
 	case e1000_82580:
 	case e1000_i350:
 	case e1000_i354:
 	case e1000_i210:
 	case e1000_i211:
+		/* Fall through */
 	default:
 		for (; i < adapter->num_rx_queues; i++)
 			adapter->rx_ring[i]->reg_idx = rbase_offset + i;
@@ -7958,11 +7960,13 @@ static void igb_vmm_control(struct igb_adapter *adapter)
 		reg = rd32(E1000_DTXCTL);
 		reg |= E1000_DTXCTL_VLAN_ADDED;
 		wr32(E1000_DTXCTL, reg);
+		/* Fall through */
 	case e1000_82580:
 		/* enable replication vlan tag stripping */
 		reg = rd32(E1000_RPLOLR);
 		reg |= E1000_RPLOLR_STRVLAN;
 		wr32(E1000_RPLOLR, reg);
+		/* Fall through */
 	case e1000_i350:
 		/* none of the above registers are supported by i350 */
 		break;