- 24 2月, 2012 1 次提交
-
-
由 Olof Johansson 提交于
Traditionally the kernel has refused to setup EFI at all if there's been a mismatch in 32/64-bit mode between EFI and the kernel. On some platforms that boot natively through EFI (Chrome OS being one), we still need to get at least some of the static data such as memory configuration out of EFI. Runtime services aren't as critical, and it's a significant amount of work to implement switching between the operating modes to call between kernel and firmware for thise cases. So I'm ignoring it for now. v5: * Fixed some printk strings based on feedback * Renamed 32/64-bit specific types to not have _ prefix * Fixed bug in printout of efi runtime disablement v4: * Some of the earlier cleanup was accidentally reverted by this patch, fixed. * Reworded some messages to not have to line wrap printk strings v3: * Reorganized to a series of patches to make it easier to review, and do some of the cleanups I had left out before. v2: * Added graceful error handling for 32-bit kernel that gets passed EFI data above 4GB. * Removed some warnings that were missed in first version. Signed-off-by: NOlof Johansson <olof@lixom.net> Link: http://lkml.kernel.org/r/1329081869-20779-6-git-send-email-olof@lixom.netSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 13 12月, 2011 1 次提交
-
-
由 Keith Packard 提交于
This hangs my MacBook Air at boot time; I get no console messages at all. I reverted this on top of -rc5 and my machine boots again. This reverts commit e8c71062. Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NKeith Packard <keithp@keithp.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@consoleSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 12月, 2011 1 次提交
-
-
由 Matt Fleming 提交于
Introduce a symbol, EFI_LOADER_SIGNATURE instead of using the magic strings, which also helps to reduce the amount of ifdeffery. Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1318848017-12301-1-git-send-email-matt@console-pimps.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 09 12月, 2011 1 次提交
-
-
由 Matt Fleming 提交于
If we encounter an efi_memory_desc_t without EFI_MEMORY_WB set in ->attribute we currently call set_memory_uc(), which in turn calls __pa() on a potentially ioremap'd address. On CONFIG_X86_32 this is invalid, resulting in the following oops on some machines: BUG: unable to handle kernel paging request at f7f22280 IP: [<c10257b9>] reserve_ram_pages_type+0x89/0x210 [...] Call Trace: [<c104f8ca>] ? page_is_ram+0x1a/0x40 [<c1025aff>] reserve_memtype+0xdf/0x2f0 [<c1024dc9>] set_memory_uc+0x49/0xa0 [<c19334d0>] efi_enter_virtual_mode+0x1c2/0x3aa [<c19216d4>] start_kernel+0x291/0x2f2 [<c19211c7>] ? loglevel+0x1b/0x1b [<c19210bf>] i386_start_kernel+0xbf/0xc8 A better approach to this problem is to map the memory region with the correct attributes from the start, instead of modifying it after the fact. The uncached case can be handled by ioremap_nocache() and the cached by ioremap_cache(). Despite first impressions, it's not possible to use ioremap_cache() to map all cached memory regions on CONFIG_X86_64 because EFI_RUNTIME_SERVICES_DATA regions really don't like being mapped into the vmalloc space, as detailed in the following bug report, https://bugzilla.redhat.com/show_bug.cgi?id=748516 Therefore, we need to ensure that any EFI_RUNTIME_SERVICES_DATA regions are covered by the direct kernel mapping table on CONFIG_X86_64. To accomplish this we now map E820_RESERVED_EFI regions via the direct kernel mapping with the initial call to init_memory_mapping() in setup_arch(), whereas previously these regions wouldn't be mapped if they were after the last E820_RAM region until efi_ioremap() was called. Doing it this way allows us to delete efi_ioremap() completely. Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console-pimps.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 11月, 2011 1 次提交
-
-
由 Feng Tang 提交于
Some wall clock devices use MMIO based HW register, this new function will give them a chance to do some initialization work before their get/set_time service get called. Signed-off-by: NFeng Tang <feng.tang@intel.com> Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 7月, 2011 1 次提交
-
-
由 Tejun Heo 提交于
Other than sanity check and debug message, the x86 specific version of memblock reserve/free functions are simple wrappers around the generic versions - memblock_reserve/free(). This patch adds debug messages with caller identification to the generic versions and replaces x86 specific ones and kills them. arch/x86/include/asm/memblock.h and arch/x86/mm/memblock.c are empty after this change and removed. Signed-off-by: NTejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-14-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 14 7月, 2011 1 次提交
-
-
由 Tejun Heo 提交于
25818f0f (memblock: Make MEMBLOCK_ERROR be 0) thankfully made MEMBLOCK_ERROR 0 and there already are codes which expect error return to be 0. There's no point in keeping MEMBLOCK_ERROR around. End its misery. Signed-off-by: NTejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310457490-3356-6-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 26 5月, 2011 1 次提交
-
-
由 Matthew Garrett 提交于
UEFI stands for "Unified Extensible Firmware Interface", where "Firmware" is an ancient African word meaning "Why do something right when you can do it so wrong that children will weep and brave adults will cower before you", and "UEI" is Celtic for "We missed DOS so we burned it into your ROMs". The UEFI specification provides for runtime services (ie, another way for the operating system to be forced to depend on the firmware) and we rely on these for certain trivial tasks such as setting up the bootloader. But some hardware fails to work if we attempt to use these runtime services from physical mode, and so we have to switch into virtual mode. So far so dreadful. The specification makes it clear that the operating system is free to do whatever it wants with boot services code after ExitBootServices() has been called. SetVirtualAddressMap() can't be called until ExitBootServices() has been. So, obviously, a whole bunch of EFI implementations call into boot services code when we do that. Since we've been charmingly naive and trusted that the specification may be somehow relevant to the real world, we've already stuffed a picture of a penguin or something in that address space. And just to make things more entertaining, we've also marked it non-executable. This patch allocates the boot services regions during EFI init and makes sure that they're executable. Then, after SetVirtualAddressMap(), it discards them and everyone lives happily ever after. Except for the ones who have to work on EFI, who live sad lives haunted by the knowledge that someone's eventually going to write yet another firmware specification. [ hpa: adding this to urgent with a stable tag since it fixes currently-broken hardware. However, I do not know what the dependencies are and so I do not know which -stable versions this may be a candidate for. ] Signed-off-by: NMatthew Garrett <mjg@redhat.com> Link: http://lkml.kernel.org/r/1306331593-28715-1-git-send-email-mjg@redhat.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: <stable@kernel.org>
-
- 25 5月, 2011 1 次提交
-
-
由 Mike Travis 提交于
On larger systems, because of the numerous ACPI, Bootmem and EFI messages, the static log buffer overflows before the larger one specified by the log_buf_len param is allocated. Minimize the overflow by allocating the new log buffer as soon as possible. On kernels without memblock, a later call to setup_log_buf from kernel/init.c is the fallback. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix CONFIG_PRINTK=n build] Signed-off-by: NMike Travis <travis@sgi.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 5月, 2011 1 次提交
-
-
由 Yinghai Lu 提交于
This workaround holds a dma32 buffer at early boot to prevent later bootmem allocations from stealing it in the case of large RAM configs. Now that x86 is using memblock, and the nobootmem wrapper does top-down allocation, it's no longer necessary, so remove it. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 19 4月, 2011 1 次提交
-
-
由 H. Peter Anvin 提交于
Clean up and unify the NOP selection infrastructure: - Make the atomic 5-byte NOP a part of the selection system. - Pick NOPs once during early boot and then be done with it. Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> Cc: Tejun Heo <tj@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Link: http://lkml.kernel.org/r/1303166160-10315-3-git-send-email-hpa@linux.intel.com
-
- 07 4月, 2011 1 次提交
-
-
由 H. Peter Anvin 提交于
Restore the initialization of mmu_cr4_features during boot, which was removed without comment in checkin e5f15b45 x86: Cleanup highmap after brk is concluded thereby breaking resume from hibernate. This restores previous functionality in approximately the same place, and corrects the reading of %cr4 on pre-CPUID hardware (%cr4 exists if and only if CPUID is supported.) However, part of the problem is that the hibernate suspend/resume sequence should manage the save/restore of %cr4 explicitly. Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <201104020154.57136.rjw@sisk.pl>
-
- 24 3月, 2011 1 次提交
-
-
由 Olaf Hering 提交于
crash_dump: export is_kdump_kernel to modules, consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn The Xen PV drivers in a crashed HVM guest can not connect to the dom0 backend drivers because both frontend and backend drivers are still in connected state. To run the connection reset function only in case of a crashdump, the is_kdump_kernel() function needs to be available for the PV driver modules. Consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn into kernel/crash_dump.c Also export elfcorehdr_addr to make is_kdump_kernel() usable for modules. Leave 'elfcorehdr' as early_param(). This changes powerpc from __setup() to early_param(). It adds an address range check from x86 also on ia64 and powerpc. [akpm@linux-foundation.org: additional #includes] [akpm@linux-foundation.org: remove elfcorehdr_addr export] [akpm@linux-foundation.org: fix for Tejun's mm/nobootmem.c changes] Signed-off-by: NOlaf Hering <olaf@aepfle.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 3月, 2011 1 次提交
-
-
由 Yinghai Lu 提交于
Now cleanup_highmap actually is in two steps: one is early in head64.c and only clears above _end; a second one is in init_memory_mapping() and tries to clean from _brk_end to _end. It should check if those boundaries are PMD_SIZE aligned but currently does not. Also init_memory_mapping() is called several times for numa or memory hotplug, so we really should not handle initial kernel mappings there. This patch moves cleanup_highmap() down after _brk_end is settled so we can do everything in one step. Also we honor max_pfn_mapped in the implementation of cleanup_highmap. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> LKML-Reference: <alpine.DEB.2.00.1103171739050.3382@kaball-desktop> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 04 3月, 2011 1 次提交
-
-
由 Tejun Heo 提交于
This patch reverts NUMA affine page table allocation added by commit 1411e0ec (x86-64, numa: Put pgtable to local node memory). The commit made an undocumented change where the kernel linear mapping strictly follows intersection of e820 memory map and NUMA configuration. If the physical memory configuration has holes or NUMA nodes are not properly aligned, this leads to using unnecessarily smaller mapping size which leads to increased TLB pressure. For details, http://thread.gmane.org/gmane.linux.kernel/1104672 Patches to fix the problem have been proposed but the underlying code needs more cleanup and the approach itself seems a bit heavy handed and it has been determined to revert the feature for now and come back to it in the next developement cycle. http://thread.gmane.org/gmane.linux.kernel/1105959 As init_memory_mapping_high() callsites have been consolidated since the commit, reverting is done manually. Also, the RED-PEN comment in arch/x86/mm/init.c is not restored as the problem no longer exists with memblock based top-down early memory allocation. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de>
-
- 25 2月, 2011 1 次提交
-
-
由 Thomas Gleixner 提交于
Up to now we force enable the local apic in the devicetree setup uncoditionally and set smp_found_config unconditionally to 1 when a devicetree blob is available. This breaks, when local apic is disabled in the Kconfig. Make it consistent by initializing device tree explicitely before smp_get_config() so a non lapic configuration could be used as well. To be functional that would require to implement PIT as an interrupt host, but the only user of this code until now is ce4100 which requires apics to be available. So we leave this up to those who need it. Tested-by: NSebastian Siewior <bigeasy@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 24 2月, 2011 2 次提交
-
-
This patch adds minimal support for device tree on x86. The device tree blob is passed to the kernel via setup_data which requires at least boot protocol 2.09. Memory size, restricted memory regions, boot arguments are gathered the traditional way so things like cmd_line are just here to let the code compile. The current plan is use the device tree as an extension and to gather information which can not be enumerated and would have to be hardcoded otherwise. This includes things like - which devices are on this I2C/SPI bus? - how are the interrupts wired to IO APIC? - where could my hpet be? Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-3-git-send-email-bigeasy@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
This patch ensures that the memory passed from parse_setup_data() is large enough to cover the complete data structure. That means that the conditional mapping in parse_e820_ext() can go. While here, I also attempt not to map two pages if the address is not aligned to a page boundary. Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com> Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-2-git-send-email-bigeasy@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 18 2月, 2011 2 次提交
-
-
由 H. Peter Anvin 提交于
Use the unified trampoline allocation setup to allocate and install the ACPI wakeup code in low memory. Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> LKML-Reference: <4D5DFBE4.7090104@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthieu Castet <castet.matthieu@free.fr> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
-
由 H. Peter Anvin 提交于
Common infrastructure for low memory trampolines. This code installs the trampolines permanently in low memory very early. It also permits multiple pieces of code to be used for this purpose. This code also introduces a standard infrastructure for computing symbol addresses in the trampoline code. The only change to the actual SMP trampolines themselves is that the 64-bit trampoline has been made reusable -- the previous version would overwrite the code with a status variable; this moves the status variable to a separate location. Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> LKML-Reference: <4D5DFBE4.7090104@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthieu Castet <castet.matthieu@free.fr> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
-
- 16 2月, 2011 4 次提交
-
-
由 Tejun Heo 提交于
There's no reason for these to live in setup_arch(). Move them inside initmem_init(). - v2: x86-32 initmem_init() weren't updated breaking 32bit builds. Fixed. Found by Ankita. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Ankita Garg <ankita@in.ibm.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
Because of the way ACPI tables are parsed, the generic acpi_numa_init() couldn't return failure when error was detected by arch hooks. Instead, the failure state was recorded and later arch dependent init hook - acpi_scan_nodes() - would fail. Wrap acpi_numa_init() with x86_acpi_numa_init() so that failure can be indicated as return value immediately. This is in preparation for further NUMA init cleanups. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
The functions used during NUMA initialization - *_numa_init() and *_scan_nodes() - have different arguments and return values. Unify them such that they all take no argument and return 0 on success and -errno on failure. This is in preparation for further NUMA init cleanups. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
由 Tejun Heo 提交于
initmem_init() extensively accesses and modifies global data structures and the parameters aren't even followed depending on which path is being used. Drop @start/last_pfn and let it deal with @max_pfn directly. This is in preparation for further NUMA init cleanups. - v2: x86-32 initmem_init() weren't updated breaking 32bit builds. Fixed. Found by Yinghai. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
-
- 15 2月, 2011 1 次提交
-
-
由 Feng Tang 提交于
Some wall clock devices use MMIO based HW register, this new function will give them a chance to do some initialization work before their get/set_time service get called, which is usually in early kernel boot phase. Signed-off-by: NFeng Tang <feng.tang@intel.com> Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 28 1月, 2011 1 次提交
-
-
由 Tejun Heo 提交于
Now that everything else is unified, NUMA initialization can be unified too. * numa_init_array() and init_cpu_to_node() are moved from numa_64 to numa. * numa_32::initmem_init() is updated to call numa_init_array() and setup_arch() to call init_cpu_to_node() on 32bit too. * x86_cpu_to_node_map is now initialized to NUMA_NO_NODE on 32bit too. This is safe now as numa_init_array() will initialize it early during boot. This makes NUMA mapping fully initialized before setup_per_cpu_areas() on 32bit too and thus makes the first percpu chunk which contains all the static variables and some of dynamic area allocated with NUMA affinity correctly considered. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-17-git-send-email-tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Reviewed-by: NPekka Enberg <penberg@kernel.org>
-
- 05 1月, 2011 1 次提交
-
-
由 Yinghai Lu 提交于
It is not related to init_memory_mapping(), and init_memory_mapping() is getting more bigger. So make it as seperated function and call it from reserve_brk() and that is point when _brk_end is concluded. Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <4D1933E0.7090305@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 30 12月, 2010 2 次提交
-
-
由 Yinghai Lu 提交于
Introduce init_memory_mapping_high(), and use it with 64bit. It will go with every memory segment above 4g to create page table to the memory range itself. before this patch all page tables was on one node. with this patch, one RED-PEN is killed debug out for 8 sockets system after patch [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff] [ 0.000000] 0000000000 - 007f600000 page 2M [ 0.000000] 007f600000 - 007f750000 page 4k [ 0.000000] kernel direct mapping tables up to 7f750000 @ [0x7f74c000-0x7f74ffff] [ 0.000000] RAMDISK: 7bc84000 - 7f745000 .... [ 0.000000] Adding active range (0, 0x10, 0x95) 0 entries of 3200 used [ 0.000000] Adding active range (0, 0x100, 0x7f750) 1 entries of 3200 used [ 0.000000] Adding active range (0, 0x100000, 0x1080000) 2 entries of 3200 used [ 0.000000] Adding active range (1, 0x1080000, 0x2080000) 3 entries of 3200 used [ 0.000000] Adding active range (2, 0x2080000, 0x3080000) 4 entries of 3200 used [ 0.000000] Adding active range (3, 0x3080000, 0x4080000) 5 entries of 3200 used [ 0.000000] Adding active range (4, 0x4080000, 0x5080000) 6 entries of 3200 used [ 0.000000] Adding active range (5, 0x5080000, 0x6080000) 7 entries of 3200 used [ 0.000000] Adding active range (6, 0x6080000, 0x7080000) 8 entries of 3200 used [ 0.000000] Adding active range (7, 0x7080000, 0x8080000) 9 entries of 3200 used [ 0.000000] init_memory_mapping: [0x00000100000000-0x0000107fffffff] [ 0.000000] 0100000000 - 1080000000 page 2M [ 0.000000] kernel direct mapping tables up to 1080000000 @ [0x107ffbd000-0x107fffffff] [ 0.000000] memblock_x86_reserve_range: [0x107ffc2000-0x107fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00001080000000-0x0000207fffffff] [ 0.000000] 1080000000 - 2080000000 page 2M [ 0.000000] kernel direct mapping tables up to 2080000000 @ [0x207ff7d000-0x207fffffff] [ 0.000000] memblock_x86_reserve_range: [0x207ffc0000-0x207fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00002080000000-0x0000307fffffff] [ 0.000000] 2080000000 - 3080000000 page 2M [ 0.000000] kernel direct mapping tables up to 3080000000 @ [0x307ff3d000-0x307fffffff] [ 0.000000] memblock_x86_reserve_range: [0x307ffc0000-0x307fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00003080000000-0x0000407fffffff] [ 0.000000] 3080000000 - 4080000000 page 2M [ 0.000000] kernel direct mapping tables up to 4080000000 @ [0x407fefd000-0x407fffffff] [ 0.000000] memblock_x86_reserve_range: [0x407ffc0000-0x407fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00004080000000-0x0000507fffffff] [ 0.000000] 4080000000 - 5080000000 page 2M [ 0.000000] kernel direct mapping tables up to 5080000000 @ [0x507febd000-0x507fffffff] [ 0.000000] memblock_x86_reserve_range: [0x507ffc0000-0x507fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00005080000000-0x0000607fffffff] [ 0.000000] 5080000000 - 6080000000 page 2M [ 0.000000] kernel direct mapping tables up to 6080000000 @ [0x607fe7d000-0x607fffffff] [ 0.000000] memblock_x86_reserve_range: [0x607ffc0000-0x607fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00006080000000-0x0000707fffffff] [ 0.000000] 6080000000 - 7080000000 page 2M [ 0.000000] kernel direct mapping tables up to 7080000000 @ [0x707fe3d000-0x707fffffff] [ 0.000000] memblock_x86_reserve_range: [0x707ffc0000-0x707fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00007080000000-0x0000807fffffff] [ 0.000000] 7080000000 - 8080000000 page 2M [ 0.000000] kernel direct mapping tables up to 8080000000 @ [0x807fdfc000-0x807fffffff] [ 0.000000] memblock_x86_reserve_range: [0x807ffbf000-0x807fffffff] PGTABLE [ 0.000000] Initmem setup node 0 [0000000000000000-000000107fffffff] [ 0.000000] NODE_DATA [0x0000107ffbd000-0x0000107ffc1fff] [ 0.000000] Initmem setup node 1 [0000001080000000-000000207fffffff] [ 0.000000] NODE_DATA [0x0000207ffbb000-0x0000207ffbffff] [ 0.000000] Initmem setup node 2 [0000002080000000-000000307fffffff] [ 0.000000] NODE_DATA [0x0000307ffbb000-0x0000307ffbffff] [ 0.000000] Initmem setup node 3 [0000003080000000-000000407fffffff] [ 0.000000] NODE_DATA [0x0000407ffbb000-0x0000407ffbffff] [ 0.000000] Initmem setup node 4 [0000004080000000-000000507fffffff] [ 0.000000] NODE_DATA [0x0000507ffbb000-0x0000507ffbffff] [ 0.000000] Initmem setup node 5 [0000005080000000-000000607fffffff] [ 0.000000] NODE_DATA [0x0000607ffbb000-0x0000607ffbffff] [ 0.000000] Initmem setup node 6 [0000006080000000-000000707fffffff] [ 0.000000] NODE_DATA [0x0000707ffbb000-0x0000707ffbffff] [ 0.000000] Initmem setup node 7 [0000007080000000-000000807fffffff] [ 0.000000] NODE_DATA [0x0000807ffba000-0x0000807ffbefff] Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <4D1933D1.9020609@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
Move it into head file. to prepare use it in other files. [ hpa: added missing <linux/types.h> and changed type to phys_addr_t. ] Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <4D1933BA.8000508@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 18 12月, 2010 2 次提交
-
-
由 H. Peter Anvin 提交于
Keep the crash kernel address below 512 MiB for 32 bits and 896 MiB for 64 bits. For 32 bits, this retains compatibility with earlier kernel releases, and makes it work even if the vmalloc= setting is adjusted. For 64 bits, we should be able to increase this substantially once a hard-coded limit in kexec-tools is fixed. Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <20101217195035.GE14502@redhat.com>
-
由 Bjorn Helgaas 提交于
This reverts commit 1af3c2e4. Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 18 11月, 2010 1 次提交
-
-
由 Hans Rosenfeld 提交于
Not only the naming of the files was confusing, it was even more so for the function and variable names. Renamed the K8 NB and NUMA stuff that is also used on other AMD platforms. This also renames the CONFIG_K8_NUMA option to CONFIG_AMD_NUMA and the related file k8topology_64.c to amdtopology_64.c. No functional changes intended. Signed-off-by: NHans Rosenfeld <hans.rosenfeld@amd.com> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
- 27 10月, 2010 2 次提交
-
-
由 Bjorn Helgaas 提交于
Request that allocate_resource() use available space from high addresses first, rather than the default of using low addresses first. The most common place this makes a difference is when we move or assign new PCI device resources. Low addresses are generally scarce, so it's better to use high addresses when possible. This follows Windows practice for PCI allocation. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c42Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
The iomem_resource map reflects the available physical address space. We statically initialize the end to -1, i.e., 0xffffffff_ffffffff, but of course we can only use as much as the CPU can address. This patch updates the end based on the CPU capabilities, so we don't mistakenly allocate space that isn't usable, as we're likely to do when allocating from the top-down. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 23 10月, 2010 1 次提交
-
-
由 Thomas Gleixner 提交于
probe_br_irqs_gsi() is called right after ioapic_init_mappings() and there are no other users. Move it into ioapic_init_mappings() so the declaration can disappear and the function can become static. Rename ioapic_init_mappings() to ioapic_and_gsi_init() to reflect that change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> LKML-Reference: <1287510389-8388-2-git-send-email-dirk.brandewie@gmail.com> Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com>
-
- 21 10月, 2010 1 次提交
-
-
由 Borislav Petkov 提交于
This patch adds an initial page table with low mappings used exclusively for booting APs/resuming after ACPI suspend/machine restart. After this, there's no need to add low mappings to swapper_pg_dir and zap them later or create own swsusp PGD page solely for ACPI sleep needs - we have initial_page_table for that. Signed-off-by: NBorislav Petkov <bp@alien8.de> LKML-Reference: <20101020070526.GA9588@liondog.tnic> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 14 10月, 2010 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
head_64.S maps up to 512 MiB, but that is not necessarity true for other entry paths, such as Xen. Thus, co-locate the setting of max_pfn_mapped with the code to actually set up the page tables in head_64.S. The 32-bit code is already so co-located. (The Xen code already sets max_pfn_mapped correctly for its own use case.) -v2: Yinghai fixed the following bug in this patch: | | max_pfn_mapped is in .bss section, so we need to set that | after bss get cleared. Without that we crash on bootup. | | That is safe because Xen does not call x86_64_start_kernel(). | Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Fixed-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> LKML-Reference: <4CB6AB24.9020504@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 06 10月, 2010 1 次提交
-
-
由 Yinghai Lu 提交于
Cai Qian found crashkernel is broken with the x86 memblock changes. 1. crashkernel=128M@32M always reported that range is used, even if the first kernel is small and does not usethat range 2. we always got following report when using "kexec -p" Could not find a free area of memory of a000 bytes... locate_hole failed The root cause is that generic memblock_find_in_range() will try to allocate from the top of the range, whereas the kexec code was written assuming that allocation was always near the bottom and that it could blindly extend memory upward. Unfortunately the kexec code doesn't have a system for requesting the range that it really needs, so this is subject to probabilistic failures. This patch hacks around the problem by limiting the target range heuristically to below the traditional bzImage max range. This number is arbitrary and not always correct, and a much better result would be obtained by having kexec communicate this number based on the kernel header information and any appropriate command line options. Reported-and-Bisected-by: NCAI Qian <caiqian@redhat.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <4CABAF2A.5090501@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 21 9月, 2010 2 次提交
-
-
由 Jason Baron 提交于
Move Steve's code for finding the best 5-byte no-op from ftrace.c to alternative.c. The idea is that other consumers (in this case jump label) want to make use of that code. Signed-off-by: NJason Baron <jbaron@redhat.com> LKML-Reference: <96259ae74172dcac99c0020c249743c523a92e18.1284733808.git.jbaron@redhat.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Andreas Herrmann 提交于
The file names are somehow misleading as the code is not specific to AMD K8 CPUs anymore. The files accomodate code for other AMD CPU northbridges as well. Same is true for the config option which is valid for AMD CPU northbridges in general and not specific to K8. Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20100917160343.GD4958@loge.amd.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-