Simply add MMCIF slave ids for RX and TX to enable
DMA Engine support for the AG5EVM board.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add SY-DMAC support via shdma.c to the sh73a0 SoC
including slave ids, platform data and clock bindings.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Update SH_DMAC_MAX_CHANNELS to support the 20 DMA
channels included in the sh73a0 SY-DMAC hardware.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Fix the shdma.c handing of SH_DMAC_MAX_CHANNELS
to avoid overwriting the chan_irq[] and chan_flag[]
arrays in the case of pdata->channel_num is larger
than SH_DMAC_MAX_CHANNELS.

With this patch applied up to SH_DMAC_MAX_CHANNELS
will be used by the shdma.c driver. If more channels
are available in the platform data the user will
be notified on the console.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch makes the shdma.c driver allow slave operation
on DMA hardware mapped with a single I/O-memory window.

The dmae_set_dmars() function is adjusted to use the
first memory window in case of a missing DMARS window.

At probe() time the code is updated to enable DMA_SLAVE
only if slave information is passed with the platform data.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch ties in the previously added sh7372 sleep
mode known as Core Standby together with the shared
SH-Mobile ARM CPUIdle implementation.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch adds a shared SH-Mobile ARM specific CPUIdle
implementation supporting WFI only at this point. It
serves as a common point for late registration of the
arch-specific CPUIdle code, and supports adding extra
sleep modes using the callback shmobile_cpuidle_setup()
together with shmobile_cpuidle_modes[].
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add sh7372 Core Standby sleep mode support and tie it
in with the shared SH-Mobile ARM suspend code.

The Core Standby mode is the lightest sh7372-specific
sleep mode, cutting power to the ARM core excluding the
L2 cache. Any interrupt source can be used for wakeups.

The low level portion of this code is based on the
TI OMAP sleep code in sleep34xx.S, thanks to them.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch adds a simple Suspend-to-RAM implementation
for SH-Mobile ARM. The struct shmobile_suspend_ops are
kept global to allow cpu-specific code to override
the callbacks if needed.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Use soc_camera_platform helper functions to dynamically manage the
camera device.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmobile-latest

* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
  sh: Ignore R_SH_NONE module relocations.
  SH: SE7751: Fix pcibios_map_platform_irq prototype.
  sh: remove warning and warning_symbol from struct stacktrace_ops
  sh: wire up sys_sendmmsg.
  clocksource: sh_tmu: Runtime PM support
  clocksource: sh_tmu: __clocksource_updatefreq_hz() update
  clocksource: sh_cmt: Runtime PM support
  clocksource: sh_cmt: __clocksource_updatefreq_hz() update
  dmaengine: shdma: synchronize RCU before freeing, simplify spinlock
  dmaengine: shdma: add runtime- and system-level power management
  dmaengine: shdma: fix locking
  sh: sh-sci: sh7377 and sh73a0 build fixes
  sh: cosmetic improvement: use an existing pointer
  serial: sh-sci: suspend/resume wakeup support V2
  serial: sh-sci: Runtime PM support
  sh: select IRQ_FORCED_THREADING.
  sh: intc: Set virtual IRQs as nothread.
  sh: fixup fpu.o compile order
  i2c: add a module alias to the sh-mobile driver
  ALSA: add a module alias to the FSI driver
  ...

Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Fix sample type size calculation in 32 bits archs
  profile: Use vzalloc() rather than vmalloc() & memset()

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (247 commits)
  [media] gspca - sunplus: Fix some warnings and simplify code
  [media] gspca: Fix some warnings tied to 'no debug'
  [media] gspca: Unset debug by default
  [media] gspca - cpia1: Remove a bad conditional compilation instruction
  [media] gspca - main: Remove USB traces
  [media] gspca - main: Version change to 2.13
  [media] gspca - stk014 / t613: Accept the index 0 in querymenu
  [media] gspca - kinect: Remove __devinitdata
  [media] gspca - cpia1: Fix some warnings
  [media] video/Kconfig: Fix mis-classified devices
  [media] support for medion dvb stick 1660:1921
  [media] tm6000: fix uninitialized field, change prink to dprintk
  [media] cx231xx: Add support for Iconbit U100
  [media] saa7134 add new TV cards
  [media] Use a more consistent value for RC repeat period
  [media] cx18: Move spinlock and vb_type initialisation into stream_init
  [media] tm6000: remove tm6010 sif audio start and stop
  [media] tm6000: remove unused exports
  [media] tm6000: add pts logging
  [media] tm6000: change from ioctl to unlocked_ioctl
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
  fat: Fix statfs->f_namelen
  fat: Replace all printk with fat_msg()
  fat: Add fat_msg() function for preformated FAT messages
  fat: Convert fat_fs_error to use %pV
  fat: Fix possible null deref in fat_cache_add()
  fat: use new setup() for ->dir_ops too

The coretemp driver provides a single set of device attributes for each
physical core of a HT CPU to avoid duplicate sensors.  This
functionality was introduced with commit d883b9f0 ("hwmon:
(coretemp) Skip duplicate CPU entries").

Commit e40cc4bd ("x86/hwmon: register alternate sibling upon CPU
removal") extends this functionality to register the HT sibling of a CPU
which is taken offline, to ensure that sensor attributes are provided if
at least one HT sibling of a core is online.

Add comments into the code describing the functionality in some more
detail.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We try to enforce it by using -Wstrict-prototypes, but apparently they
sometimes get through.  Introduced by 4eec42f3 ("watchdog: Change
the default timeout and configure nmi watchdog period based").
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add SDHI0 and SDHI1 support to the AG5EVM board
including platform data, pinmux configuration
and clock bindings.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch reverts "ARM: mach-shmobile: sh7372 SDHI vector merge" and
supplies 3 IRQ resources for each SDHI block.

Some blocks have a 4th IRQ, but this is used for DRM feathres
that I do not have access tot he documentation for and are almost
certainly tainted by licensing issues. So the 4th IRQ is not
hooked-up even if it exists.

Cc: Chris Ball <cjb@laptop.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Update the struct resources for DSI0 to include the
hardware block name. Purely cosmetic, makes /proc/iomem
look slightly better.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Fix the case of too late twd_base initialization for SMP
on sh73a0 which bas been broken because sh73a0 specific
smp_prepare_cpu() and percpu_timer_setup() changed order
in the commits:

05c74a6c
c413521e

Without this fix the sh73a0 SMP kernel panics on boot.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Git commit f4117ac9
introduced PLAT_PHYS_OFFSET, but headsmp.S was left
unchanged which results in a compile error:

  AS      arch/arm/mach-shmobile/headsmp.o
arch/arm/mach-shmobile/headsmp.S: Assembler messages:
arch/arm/mach-shmobile/headsmp.S:27: Error: undefined symbol `secondary_startup' in operation
arch/arm/mach-shmobile/headsmp.S:27: Error: undefined symbol `PHYS_OFFSET' in operation
make[1]: *** [arch/arm/mach-shmobile/headsmp.o] Error 1
make[1]: *** Waiting for unfinished jobs....
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Update the sh7372 clock code to set the RT side
set of MSTP bits to a fixed disabled state.

The sh7372 SoC contains two sets of MSTP bits,
one for the ARM (SYS) side, and one for the
SH4AL-DSP (RT) side. The actual clock associated
with the MSTP bit will only be stopped when both
sides have set the MSTP bit to disabled mode.

Some MSTP bits are enabled by default after
hardware reset, so this patch adjusts the code
to disable all MSTP bits associated with the RT
side to allow the SYS side to have full control.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The PLLC2 clock on AP4 systems does not need to run constantly to be
able to use HDMI. The HDMI hotplug interrupt works without the PLL
too, after which all the necessary clocks will be turned on by the
runtime PM.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add DMA mode support for the MMCIF controller on mackerel.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Remember to also check for the CONFIG_MMC_SH_MMCIF_MODULE option
for the case of a modular MMCIF driver.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Export the following sh7377 multimedia hardware blocks
using UIO: VPU, VEU[0-3], JPU and SPU2[0-1]
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Export the following sh7372 multimedia hardware blocks
using UIO: VPU, VEU[0-3], JPU and SPU2[0-1]
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Export the following sh7367 multimedia hardware blocks
using UIO: VPU, VEU[0-3], VEU2H, JPU and SPU1
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Update the sh7377 serial port types to make use of
PORT_SCIFA and PORT_SCIFB. This makes the software
match the sh7377 data sheet.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

* Set receive enable and transmit enable bits of SCASCR0 (E6C400089).
  Values previously written to this register was bogus.

  Curiously earlyprintk works with the previous code.

* Remove duplicate initialisation of GPIO port 152, SCIFA0_TXD (0xE6053098).
  This should have no effect other than to very slightly reduce the amount of
  code.
Reported-by: NMagnus Damm <magnus.damm@gmail.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmobile-latest

The shift used here to count the number of bits set in
the mask doesn't work above the low part for archs that
are not 64 bits.

Fix the constant used for the shift.

This fixes a 32-bit perf top failure reported by Eric Dumazet:

	Can't parse sample, err = -14
	Can't parse sample, err = -14
	...
Reported-and-tested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com
Link: http://lkml.kernel.org/r/1306200686-17317-1-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits)
  PCI: Don't use dmi_name_in_vendors in quirk
  PCI: remove unused AER functions
  PCI/sysfs: move bus cpuaffinity to class dev_attrs
  PCI: add rescan to /sys/.../pci_bus/.../
  PCI: update bridge resources to get more big ranges when allocating space (again)
  KVM: Use pci_store/load_saved_state() around VM device usage
  PCI: Add interfaces to store and load the device saved state
  PCI: Track the size of each saved capability data area
  PCI/e1000e: Add and use pci_disable_link_state_locked()
  x86/PCI: derive pcibios_last_bus from ACPI MCFG
  PCI: add latency tolerance reporting enable/disable support
  PCI: add OBFF enable/disable support
  PCI: add ID-based ordering enable/disable support
  PCI hotplug: acpiphp: assume device is in state D0 after powering on a slot.
  PCI: Set PCIE maxpayload for card during hotplug insertion
  PCI/ACPI: Report _OSC control mask returned on failure to get control
  x86/PCI: irq and pci_ids patch for Intel Panther Point DeviceIDs
  PCI: handle positive error codes
  PCI: check pci_vpd_pci22_wait() return
  PCI: Use ICH6_GPIO_EN in ich6_lpc_acpi_gpio
  ...

Fix up trivial conflicts in include/linux/pci_ids.h: commit a6e5e2be
moved the intel SMBUS ID definitons to the i2c-i801.c driver.

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: obey minleft values during extent allocation correctly
  xfs: reset buffer pointers before freeing them
  xfs: avoid getting stuck during async inode flushes
  xfs: fix xfs_itruncate_start tracing
  xfs: fix duplicate workqueue initialisation
  xfs: kill off xfs_printk()
  xfs: fix race condition in AIL push trigger
  xfs: make AIL target updates and compares 32bit safe.
  xfs: always push the AIL to the target
  xfs: exit AIL push work correctly when AIL is empty
  xfs: ensure reclaim cursor is reset correctly at end of AG
  xfs: add an x86 compat handler for XFS_IOC_ZERO_RANGE
  xfs: fix compiler warning in xfs_trace.h
  xfs: cleanup duplicate initializations
  xfs: reduce the number of pagb_lock roundtrips in xfs_alloc_clear_busy
  xfs: exact busy extent tracking
  xfs: do not immediately reuse busy extent ranges
  xfs: optimize AGFL refills

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits)
  ARM: bcmring: convert to use sp804 clockevents
  ARM: bcmring: convert to sp804 clocksource
  ARM: 6912/1: bcmring: Add clkdev table in init_early
  clockevents: ARM sp804: obtain sp804 timer rate via clks
  clockevents: ARM sp804: allow clockevent name to be specified
  clocksource: ARM sp804: obtain sp804 timer rate via clks
  clocksource: ARM sp804: allow clocksource name to be specified
  clocksource: convert OMAP1 to 32-bit down counting clocksource
  clocksource: convert MXS timrotv2 to 32-bit down counting clocksource
  clocksource: convert SPEAr platforms 16-bit up counting clocksource
  clocksource: convert Integrator/AP 16-bit down counting clocksource
  clocksource: convert W90x900 24-bit down counting clocksource
  clocksource: convert ARM 32-bit down counting clocksources
  clocksource: convert ARM 32-bit up counting clocksources
  clocksource: add common mmio clocksource
  ARM: update sa1100 to reflect PXA updates
  ARM: omap1: convert to using readl/writel instead of volatile struct
  ARM: omap1: delete useless interrupt handler
  ARM: s5p: consolidate selection of timer register
  ARM: 6939/1: fix missing 'cpu_relax()' declaration
  ...

Fixed the broken links in the SubmittingPatches file.

[ The old links turn out to not be broken after all, but the new links
  are certainly more readable - Linus ]
Signed-off-by: NVikram Narayanan <vikram186@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixed typos.

v2: Incorporated changes by Randy Dunlap.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>