提交 fb66c523 编写于 作者: M Magnus Damm 提交者: Paul Mundt

ARM: mach-shmobile: Add SDHI support for AG5EVM and sh73a0

Add SDHI0 and SDHI1 support to the AG5EVM board
including platform data, pinmux configuration
and clock bindings.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 2007aea1
......@@ -34,6 +34,8 @@
#include <linux/input/sh_keysc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
......@@ -327,6 +329,85 @@ static struct platform_device mipidsi0_device = {
},
};
static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
};
static struct resource sdhi0_resources[] = {
[0] = {
.name = "SDHI0",
.start = 0xee100000,
.end = 0xee1000ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(83),
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = gic_spi(84),
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = gic_spi(85),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sdhi0_device = {
.name = "sh_mobile_sdhi",
.id = 0,
.num_resources = ARRAY_SIZE(sdhi0_resources),
.resource = sdhi0_resources,
.dev = {
.platform_data = &sdhi0_info,
},
};
void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
{
gpio_set_value(GPIO_PORT114, state);
}
static struct sh_mobile_sdhi_info sh_sdhi1_platdata = {
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
.tmio_caps = MMC_CAP_NONREMOVABLE,
.tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.set_pwr = ag5evm_sdhi1_set_pwr,
};
static struct resource sdhi1_resources[] = {
[0] = {
.name = "SDHI1",
.start = 0xee120000,
.end = 0xee1200ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(87),
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = gic_spi(88),
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = gic_spi(89),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sdhi1_device = {
.name = "sh_mobile_sdhi",
.id = 1,
.dev = {
.platform_data = &sh_sdhi1_platdata,
},
.num_resources = ARRAY_SIZE(sdhi1_resources),
.resource = sdhi1_resources,
};
static struct platform_device *ag5evm_devices[] __initdata = {
&eth_device,
&keysc_device,
......@@ -335,6 +416,8 @@ static struct platform_device *ag5evm_devices[] __initdata = {
&irda_device,
&lcdc0_device,
&mipidsi0_device,
&sdhi0_device,
&sdhi1_device,
};
static struct map_desc ag5evm_io_desc[] __initdata = {
......@@ -456,6 +539,26 @@ static void __init ag5evm_init(void)
/* MIPI-DSI clock setup */
__raw_writel(0x2a809010, DSI0PHYCR);
/* enable SDHI0 on CN15 [SD I/F] */
gpio_request(GPIO_FN_SDHICD0, NULL);
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHID0_2, NULL);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
/* enable SDHI1 on CN4 [WLAN I/F] */
gpio_request(GPIO_FN_SDHICLK1, NULL);
gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
gpio_request(GPIO_FN_SDHID1_3_PU, NULL);
gpio_request(GPIO_FN_SDHID1_2_PU, NULL);
gpio_request(GPIO_FN_SDHID1_1_PU, NULL);
gpio_request(GPIO_FN_SDHID1_0_PU, NULL);
gpio_request(GPIO_PORT114, "sdhi1_power");
gpio_direction_output(GPIO_PORT114, 0);
#ifdef CONFIG_CACHE_L2X0
/* Shared attribute override enable, 64K*8way */
l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff);
......
......@@ -266,7 +266,7 @@ enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
MSTP219,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
MSTP331, MSTP329, MSTP325, MSTP323, MSTP312,
MSTP331, MSTP329, MSTP325, MSTP323, MSTP314, MSTP313, MSTP312, MSTP311,
MSTP411, MSTP410, MSTP403,
MSTP_NR };
......@@ -295,7 +295,10 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
......@@ -313,6 +316,9 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
CLKDEV_CON_ID("sdhi0_clk", &div6_clks[DIV6_SDHI0]),
CLKDEV_CON_ID("sdhi1_clk", &div6_clks[DIV6_SDHI1]),
CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
......@@ -341,7 +347,10 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
......@@ -351,6 +360,11 @@ void __init sh73a0_clock_init(void)
{
int k, ret = 0;
/* Set SDHI clocks to a known state */
__raw_writel(0x108, SD0CKCR);
__raw_writel(0x108, SD1CKCR);
__raw_writel(0x108, SD2CKCR);
/* detect main clock parent */
switch ((__raw_readl(CKSCR) >> 24) & 0x03) {
case 0:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册