Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 19 9月, 2016 7 次提交
  3. 28 7月, 2016 2 次提交
    • T
      random: use for_each_online_node() to iterate over NUMA nodes · 59b8d4f1
      由 Theodore Ts'o 提交于 
      This fixes a crash on s390 with fake NUMA enabled.
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Fixes: 1e7f583a ("random: make /dev/urandom scalable for silly userspace programs")
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      59b8d4f1
    • L
      Add braces to avoid "ambiguous ‘else’" compiler warnings · 194dc870
      由 Linus Torvalds 提交于 
      Some of our "for_each_xyz()" macro constructs make gcc unhappy about
lack of braces around if-statements inside or outside the loop, because
the loop construct itself has a "if-then-else" statement inside of it.

The resulting warnings look something like this:

  drivers/gpu/drm/i915/i915_debugfs.c: In function ‘i915_dump_lrc’:
  drivers/gpu/drm/i915/i915_debugfs.c:2103:6: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses]
     if (ctx != dev_priv->kernel_context)
        ^

even if the code itself is fine.

Since the warning is fairly easy to avoid by adding a braces around the
if-statement near the for_each_xyz() construct, do so, rather than
disabling the otherwise potentially useful warning.

(The if-then-else statements used in the "for_each_xyz()" constructs are
designed to be inherently safe even with no braces, but in this case
it's quite understandable that gcc isn't really able to tell that).

This finally leaves the standard "allmodconfig" build with just a
handful of remaining warnings, so new and valid warnings hopefully will
stand out.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      194dc870
  5. 27 7月, 2016 21 次提交
    • T
      ipmi: remove trydefaults parameter and default init · b07b58a3
      由 Tony Camuso 提交于 
      Parameter trydefaults=1 causes the ipmi_init to initialize ipmi through
the legacy port io space that was designated for ipmi. Architectures
that do not map legacy port io can panic when trydefaults=1.

Rather than implement build-time conditional exceptions for each
architecture that does not map legacy port io, we have removed legacy
port io from the driver.

Parameter 'trydefaults' has been removed. Attempts to use it hereafter
will evoke the "Unknown symbol in module, or unknown parameter" message.

The patch was built against a number of architectures and tested for
regressions and functionality on x86_64 and ARM64.
Signed-off-by: NTony Camuso <tcamuso@redhat.com>

Removed the config entry and the address source entry for default,
since neither were used any more.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
      b07b58a3
    • D
      xgene: Fix build warning with ACPI disabled. · 36232012
      由 David S. Miller 提交于 
      drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_phy_connect':
drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:759:22: warning: unused variable 'adev' [-Wunused-variable]

Fixes: 8089a96f ("drivers: net: xgene: Add backward compatibility")
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      36232012
    • G
      be2net: perform temperature query in adapter regardless of its interface state · d3480615
      由 Guilherme G. Piccoli 提交于 
      The be2net driver performs fw temperature queries on be_worker() routine,
which is executed each second for each be_adapter. There is a frequency
threshold to avoid fw query to happens at each call to be_worker();
instead, currently a fw query occurs once in 64 runs of the procedure.

Nevertheless, this fw temperature query is invoked only for adapters which
interface is up, so we can see I/O errors on read of hwmon counters from
userspace (from tools like lm-sensors) in case we have adapters' functions
which interface is down.

This patch moves the fw query code to be invoked even if interface is down.
No functional changes were introduced.
Signed-off-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: NSathya Perla <sathya.perla@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d3480615
    • M
      mm: fix build warnings in <linux/compaction.h> · dd4123f3
      由 Minchan Kim 提交于 
      Randy reported below build error.

> In file included from ../include/linux/balloon_compaction.h:48:0,
>                  from ../mm/balloon_compaction.c:11:
> ../include/linux/compaction.h:237:51: warning: 'struct node' declared inside parameter list [enabled by default]
>  static inline int compaction_register_node(struct node *node)
> ../include/linux/compaction.h:237:51: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
> ../include/linux/compaction.h:242:54: warning: 'struct node' declared inside parameter list [enabled by default]
>  static inline void compaction_unregister_node(struct node *node)
>

It was caused by non-lru page migration which needs compaction.h but
compaction.h doesn't include any header to be standalone.

I think proper header for non-lru page migration is migrate.h rather
than compaction.h because migrate.h has already headers needed to work
non-lru page migration indirectly like isolate_mode_t, migrate_mode
MIGRATEPAGE_SUCCESS.

[akpm@linux-foundation.org: revert mm-balloon-use-general-non-lru-movable-page-feature-fix.patch temp fix]
Link: http://lkml.kernel.org/r/20160610003304.GE29779@bboxSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Gioh Kim <gi-oh.kim@profitbricks.com>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      dd4123f3
    • H
      shmem: get_unmapped_area align huge page · c01d5b30
      由 Hugh Dickins 提交于 
      Provide a shmem_get_unmapped_area method in file_operations, called at
mmap time to decide the mapping address.  It could be conditional on
CONFIG_TRANSPARENT_HUGEPAGE, but save #ifdefs in other places by making
it unconditional.

shmem_get_unmapped_area() first calls the usual mm->get_unmapped_area
(which we treat as a black box, highly dependent on architecture and
config and executable layout).  Lots of conditions, and in most cases it
just goes with the address that chose; but when our huge stars are
rightly aligned, yet that did not provide a suitable address, go back to
ask for a larger arena, within which to align the mapping suitably.

There have to be some direct calls to shmem_get_unmapped_area(), not via
the file_operations: because of the way shmem_zero_setup() is called to
create a shmem object late in the mmap sequence, when MAP_SHARED is
requested with MAP_ANONYMOUS or /dev/zero.  Though this only matters
when /proc/sys/vm/shmem_huge has been set.

Link: http://lkml.kernel.org/r/1466021202-61880-29-git-send-email-kirill.shutemov@linux.intel.comSigned-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c01d5b30
    • K
      mm, rmap: account shmem thp pages · 65c45377
      由 Kirill A. Shutemov 提交于 
      Let's add ShmemHugePages and ShmemPmdMapped fields into meminfo and
smaps.  It indicates how many times we allocate and map shmem THP.

NR_ANON_TRANSPARENT_HUGEPAGES is renamed to NR_ANON_THPS.

Link: http://lkml.kernel.org/r/1466021202-61880-27-git-send-email-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      65c45377
    • K
      mm: do not pass mm_struct into handle_mm_fault · dcddffd4
      由 Kirill A. Shutemov 提交于 
      We always have vma->vm_mm around.

Link: http://lkml.kernel.org/r/1466021202-61880-8-git-send-email-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      dcddffd4
    • V
      mm, frontswap: convert frontswap_enabled to static key · 8ea1d2a1
      由 Vlastimil Babka 提交于 
      I have noticed that frontswap.h first declares "frontswap_enabled" as
extern bool variable, and then overrides it with "#define
frontswap_enabled (1)" for CONFIG_FRONTSWAP=Y or (0) when disabled.  The
bool variable isn't actually instantiated anywhere.

This all looks like an unfinished attempt to make frontswap_enabled
reflect whether a backend is instantiated.  But in the current state,
all frontswap hooks call unconditionally into frontswap.c just to check
if frontswap_ops is non-NULL.  This should at least be checked inline,
but we can further eliminate the overhead when CONFIG_FRONTSWAP is
enabled and no backend registered, using a static key that is initially
disabled, and gets enabled only upon first backend registration.

Thus, checks for "frontswap_enabled" are replaced with
"frontswap_enabled()" wrapping the static key check.  There are two
exceptions:

- xen's selfballoon_process() was testing frontswap_enabled in code guarded
  by #ifdef CONFIG_FRONTSWAP, which was effectively always true when reachable.
  The patch just removes this check. Using frontswap_enabled() does not sound
  correct here, as this can be true even without xen's own backend being
  registered.

- in SYSCALL_DEFINE2(swapon), change the check to IS_ENABLED(CONFIG_FRONTSWAP)
  as it seems the bitmap allocation cannot currently be postponed until a
  backend is registered. This means that frontswap will still have some
  memory overhead by being configured, but without a backend.

After the patch, we can expect that some functions in frontswap.c are
called only when frontswap_ops is non-NULL.  Change the checks there to
VM_BUG_ONs.  While at it, convert other BUG_ONs to VM_BUG_ONs as
frontswap has been stable for some time.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1463152235-9717-1-git-send-email-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8ea1d2a1
    • M
      zram: use __GFP_MOVABLE for memory allocation · 9bc482d3
      由 Minchan Kim 提交于 
      Zsmalloc is ready for page migration so zram can use __GFP_MOVABLE from
now on.

I did test to see how it helps to make higher order pages.  Test
scenario is as follows.

KVM guest, 1G memory, ext4 formated zram block device,

  for i in `seq 1 8`;
  do
          dd if=/dev/vda1 of=mnt/test$i.txt bs=128M count=1 &
  done

  wait `pidof dd`

  for i in `seq 1 2 8`;
  do
          rm -rf mnt/test$i.txt
  done
  fstrim -v mnt

  echo "init"
  cat /proc/buddyinfo

  echo "compaction"
  echo 1 > /proc/sys/vm/compact_memory
  cat /proc/buddyinfo

old:

  init
  Node 0, zone      DMA    208    120     51     41     11      0      0      0      0      0      0
  Node 0, zone    DMA32  16380  13777   9184   3805    789     54      3      0      0      0      0
  compaction
  Node 0, zone      DMA    132     82     40     39     16      2      1      0      0      0      0
  Node 0, zone    DMA32   5219   5526   4969   3455   1831    677    139     15      0      0      0

new:

  init
  Node 0, zone      DMA    379    115     97     19      2      0      0      0      0      0      0
  Node 0, zone    DMA32  18891  16774  10862   3947    637     21      0      0      0      0      0
  compaction
  Node 0, zone      DMA    214     66     87     29     10      3      0      0      0      0      0
  Node 0, zone    DMA32   1612   3139   3154   2469   1745    990    384     94      7      0      0

As you can see, compaction made so many high-order pages. Yay!

Link: http://lkml.kernel.org/r/1464736881-24886-13-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9bc482d3
    • M
      mm: balloon: use general non-lru movable page feature · b1123ea6
      由 Minchan Kim 提交于 
      Now, VM has a feature to migrate non-lru movable pages so balloon
doesn't need custom migration hooks in migrate.c and compaction.c.

Instead, this patch implements the page->mapping->a_ops->
{isolate|migrate|putback} functions.

With that, we could remove hooks for ballooning in general migration
functions and make balloon compaction simple.

[akpm@linux-foundation.org: compaction.h requires that the includer first include node.h]
Link: http://lkml.kernel.org/r/1464736881-24886-4-git-send-email-minchan@kernel.orgSigned-off-by: NGioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b1123ea6
    • S
      zram: drop gfp_t from zcomp_strm_alloc() · 16d37725
      由 Sergey Senozhatsky 提交于 
      We now allocate streams from CPU_UP hot-plug path, there are no
context-dependent stream allocations anymore and we can schedule from
zcomp_strm_alloc().  Use GFP_KERNEL directly and drop a gfp_t parameter.

Link: http://lkml.kernel.org/r/20160531122017.2878-9-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      16d37725
    • S
      zram: add more compression algorithms · eb9f56d8
      由 Sergey Senozhatsky 提交于 
      Add "deflate", "lz4hc", "842" algorithms to the list of known
compression backends.  The real availability of those algorithms,
however, depends on the corresponding CONFIG_CRYPTO_FOO config options.

[sergey.senozhatsky@gmail.com: zram-add-more-compression-algorithms-v3]
  Link: http://lkml.kernel.org/r/20160604024902.11778-7-sergey.senozhatsky@gmail.com
Link: http://lkml.kernel.org/r/20160531122017.2878-8-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      eb9f56d8
    • S
      zram: delete custom lzo/lz4 · ce1ed9f9
      由 Sergey Senozhatsky 提交于 
      Remove lzo/lz4 backends, we use crypto API now.

[sergey.senozhatsky@gmail.com: zram-delete-custom-lzo-lz4-v3]
  Link: http://lkml.kernel.org/r/20160604024902.11778-6-sergey.senozhatsky@gmail.com
Link: http://lkml.kernel.org/r/20160531122017.2878-7-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ce1ed9f9
    • S
      zram: use crypto api to check alg availability · 415403be
      由 Sergey Senozhatsky 提交于 
      There is no way to get a string with all the crypto comp algorithms
supported by the crypto comp engine, so we need to maintain our own
backends list.  At the same time we additionally need to use
crypto_has_comp() to make sure that the user has requested a compression
algorithm that is recognized by the crypto comp engine.  Relying on
/proc/crypto is not an options here, because it does not show
not-yet-inserted compression modules.

Example:

 modprobe zram
 cat /proc/crypto | grep -i lz4
 modprobe lz4
 cat /proc/crypto | grep -i lz4
name         : lz4
driver       : lz4-generic
module       : lz4

So the user can't tell exactly if the lz4 is really supported from
/proc/crypto output, unless someone or something has loaded it.

This patch also adds crypto_has_comp() to zcomp_available_show().  We
store all the compression algorithms names in zcomp's `backends' array,
regardless the CONFIG_CRYPTO_FOO configuration, but show only those that
are also supported by crypto engine.  This helps user to know the exact
list of compression algorithms that can be used.

Example:
  module lz4 is not loaded yet, but is supported by the crypto
  engine. /proc/crypto has no information on this module, while
  zram's `comp_algorithm' lists it:

 cat /proc/crypto | grep -i lz4

 cat /sys/block/zram0/comp_algorithm
[lzo] lz4 deflate lz4hc 842

We still use the `backends' array to determine if the requested
compression backend is known to crypto api.  This array, however, may not
contain some entries, therefore as the last step we call crypto_has_comp()
function which attempts to insmod the requested compression algorithm to
determine if crypto api supports it.  The advantage of this method is that
now we permit the usage of out-of-tree crypto compression modules
(implementing S/W or H/W compression).

[sergey.senozhatsky@gmail.com: zram-use-crypto-api-to-check-alg-availability-v3]
  Link: http://lkml.kernel.org/r/20160604024902.11778-4-sergey.senozhatsky@gmail.com
Link: http://lkml.kernel.org/r/20160531122017.2878-5-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      415403be
    • S
      zram: switch to crypto compress API · ebaf9ab5
      由 Sergey Senozhatsky 提交于 
      We don't have an idle zstreams list anymore and our write path now works
absolutely differently, preventing preemption during compression.  This
removes possibilities of read paths preempting writes at wrong places
(which could badly affect the performance of both paths) and at the same
time opens the door for a move from custom LZO/LZ4 compression backends
implementation to a more generic one, using crypto compress API.

Joonsoo Kim [1] attempted to do this a while ago, but faced with the
need of introducing a new crypto API interface.  The root cause was the
fact that crypto API compression algorithms require a compression stream
structure (in zram terminology) for both compression and decompression
ops, while in reality only several of compression algorithms really need
it.  This resulted in a concept of context-less crypto API compression
backends [2].  Both write and read paths, though, would have been
executed with the preemption enabled, which in the worst case could have
resulted in a decreased worst-case performance, e.g.  consider the
following case:

	CPU0

	zram_write()
	  spin_lock()
	    take the last idle stream
	  spin_unlock()

	<< preempted >>

		zram_read()
		  spin_lock()
		   no idle streams
			  spin_unlock()
			  schedule()

	resuming zram_write compression()

but it took me some time to realize that, and it took even longer to
evolve zram and to make it ready for crypto API.  The key turned out to be
-- drop the idle streams list entirely.  Without the idle streams list we
are free to use compression algorithms that require compression stream for
decompression (read), because streams are now placed in per-cpu data and
each write path has to disable preemption for compression op, almost
completely eliminating the aforementioned case (technically, we still have
a small chance, because write path has a fast and a slow paths and the
slow path is executed with the preemption enabled; but the frequency of
failed fast path is too low).

TEST
====

- 4 CPUs, x86_64 system
- 3G zram, lzo
- fio tests: read, randread, write, randwrite, rw, randrw

test script [3] command:
 ZRAM_SIZE=3G LOG_SUFFIX=XXXX FIO_LOOPS=5 ./zram-fio-test.sh

                   BASE           PATCHED
jobs1
READ:           2527.2MB/s	 2482.7MB/s
READ:           2102.7MB/s	 2045.0MB/s
WRITE:          1284.3MB/s	 1324.3MB/s
WRITE:          1080.7MB/s	 1101.9MB/s
READ:           430125KB/s	 437498KB/s
WRITE:          430538KB/s	 437919KB/s
READ:           399593KB/s	 403987KB/s
WRITE:          399910KB/s	 404308KB/s
jobs2
READ:           8133.5MB/s	 7854.8MB/s
READ:           7086.6MB/s	 6912.8MB/s
WRITE:          3177.2MB/s	 3298.3MB/s
WRITE:          2810.2MB/s	 2871.4MB/s
READ:           1017.6MB/s	 1023.4MB/s
WRITE:          1018.2MB/s	 1023.1MB/s
READ:           977836KB/s	 984205KB/s
WRITE:          979435KB/s	 985814KB/s
jobs3
READ:           13557MB/s	 13391MB/s
READ:           11876MB/s	 11752MB/s
WRITE:          4641.5MB/s	 4682.1MB/s
WRITE:          4164.9MB/s	 4179.3MB/s
READ:           1453.8MB/s	 1455.1MB/s
WRITE:          1455.1MB/s	 1458.2MB/s
READ:           1387.7MB/s	 1395.7MB/s
WRITE:          1386.1MB/s	 1394.9MB/s
jobs4
READ:           20271MB/s	 20078MB/s
READ:           18033MB/s	 17928MB/s
WRITE:          6176.8MB/s	 6180.5MB/s
WRITE:          5686.3MB/s	 5705.3MB/s
READ:           2009.4MB/s	 2006.7MB/s
WRITE:          2007.5MB/s	 2004.9MB/s
READ:           1929.7MB/s	 1935.6MB/s
WRITE:          1926.8MB/s	 1932.6MB/s
jobs5
READ:           18823MB/s	 19024MB/s
READ:           18968MB/s	 19071MB/s
WRITE:          6191.6MB/s	 6372.1MB/s
WRITE:          5818.7MB/s	 5787.1MB/s
READ:           2011.7MB/s	 1981.3MB/s
WRITE:          2011.4MB/s	 1980.1MB/s
READ:           1949.3MB/s	 1935.7MB/s
WRITE:          1940.4MB/s	 1926.1MB/s
jobs6
READ:           21870MB/s	 21715MB/s
READ:           19957MB/s	 19879MB/s
WRITE:          6528.4MB/s	 6537.6MB/s
WRITE:          6098.9MB/s	 6073.6MB/s
READ:           2048.6MB/s	 2049.9MB/s
WRITE:          2041.7MB/s	 2042.9MB/s
READ:           2013.4MB/s	 1990.4MB/s
WRITE:          2009.4MB/s	 1986.5MB/s
jobs7
READ:           21359MB/s	 21124MB/s
READ:           19746MB/s	 19293MB/s
WRITE:          6660.4MB/s	 6518.8MB/s
WRITE:          6211.6MB/s	 6193.1MB/s
READ:           2089.7MB/s	 2080.6MB/s
WRITE:          2085.8MB/s	 2076.5MB/s
READ:           2041.2MB/s	 2052.5MB/s
WRITE:          2037.5MB/s	 2048.8MB/s
jobs8
READ:           20477MB/s	 19974MB/s
READ:           18922MB/s	 18576MB/s
WRITE:          6851.9MB/s	 6788.3MB/s
WRITE:          6407.7MB/s	 6347.5MB/s
READ:           2134.8MB/s	 2136.1MB/s
WRITE:          2132.8MB/s	 2134.4MB/s
READ:           2074.2MB/s	 2069.6MB/s
WRITE:          2087.3MB/s	 2082.4MB/s
jobs9
READ:           19797MB/s	 19994MB/s
READ:           18806MB/s	 18581MB/s
WRITE:          6878.7MB/s	 6822.7MB/s
WRITE:          6456.8MB/s	 6447.2MB/s
READ:           2141.1MB/s	 2154.7MB/s
WRITE:          2144.4MB/s	 2157.3MB/s
READ:           2084.1MB/s	 2085.1MB/s
WRITE:          2091.5MB/s	 2092.5MB/s
jobs10
READ:           19794MB/s	 19784MB/s
READ:           18794MB/s	 18745MB/s
WRITE:          6984.4MB/s	 6676.3MB/s
WRITE:          6532.3MB/s	 6342.7MB/s
READ:           2150.6MB/s	 2155.4MB/s
WRITE:          2156.8MB/s	 2161.5MB/s
READ:           2106.4MB/s	 2095.6MB/s
WRITE:          2109.7MB/s	 2098.4MB/s

                                    BASE                       PATCHED
jobs1                              perfstat
stalled-cycles-frontend     102,480,595,419 (  41.53%)	  114,508,864,804 (  46.92%)
stalled-cycles-backend       51,941,417,832 (  21.05%)	   46,836,112,388 (  19.19%)
instructions                283,612,054,215 (    1.15)	  283,918,134,959 (    1.16)
branches                     56,372,560,385 ( 724.923)	   56,449,814,753 ( 733.766)
branch-misses                   374,826,000 (   0.66%)	      326,935,859 (   0.58%)
jobs2                              perfstat
stalled-cycles-frontend     155,142,745,777 (  40.99%)	  164,170,979,198 (  43.82%)
stalled-cycles-backend       70,813,866,387 (  18.71%)	   66,456,858,165 (  17.74%)
instructions                463,436,648,173 (    1.22)	  464,221,890,191 (    1.24)
branches                     91,088,733,902 ( 760.088)	   91,278,144,546 ( 769.133)
branch-misses                   504,460,363 (   0.55%)	      394,033,842 (   0.43%)
jobs3                              perfstat
stalled-cycles-frontend     201,300,397,212 (  39.84%)	  223,969,902,257 (  44.44%)
stalled-cycles-backend       87,712,593,974 (  17.36%)	   81,618,888,712 (  16.19%)
instructions                642,869,545,023 (    1.27)	  644,677,354,132 (    1.28)
branches                    125,724,560,594 ( 690.682)	  126,133,159,521 ( 694.542)
branch-misses                   527,941,798 (   0.42%)	      444,782,220 (   0.35%)
jobs4                              perfstat
stalled-cycles-frontend     246,701,197,429 (  38.12%)	  280,076,030,886 (  43.29%)
stalled-cycles-backend      119,050,341,112 (  18.40%)	  110,955,641,671 (  17.15%)
instructions                822,716,962,127 (    1.27)	  825,536,969,320 (    1.28)
branches                    160,590,028,545 ( 688.614)	  161,152,996,915 ( 691.068)
branch-misses                   650,295,287 (   0.40%)	      550,229,113 (   0.34%)
jobs5                              perfstat
stalled-cycles-frontend     298,958,462,516 (  38.30%)	  344,852,200,358 (  44.16%)
stalled-cycles-backend      137,558,742,122 (  17.62%)	  129,465,067,102 (  16.58%)
instructions              1,005,714,688,752 (    1.29)	1,007,657,999,432 (    1.29)
branches                    195,988,773,962 ( 697.730)	  196,446,873,984 ( 700.319)
branch-misses                   695,818,940 (   0.36%)	      624,823,263 (   0.32%)
jobs6                              perfstat
stalled-cycles-frontend     334,497,602,856 (  36.71%)	  387,590,419,779 (  42.38%)
stalled-cycles-backend      163,539,365,335 (  17.95%)	  152,640,193,639 (  16.69%)
instructions              1,184,738,177,851 (    1.30)	1,187,396,281,677 (    1.30)
branches                    230,592,915,640 ( 702.902)	  231,253,802,882 ( 702.356)
branch-misses                   747,934,786 (   0.32%)	      643,902,424 (   0.28%)
jobs7                              perfstat
stalled-cycles-frontend     396,724,684,187 (  37.71%)	  460,705,858,952 (  43.84%)
stalled-cycles-backend      188,096,616,496 (  17.88%)	  175,785,787,036 (  16.73%)
instructions              1,364,041,136,608 (    1.30)	1,366,689,075,112 (    1.30)
branches                    265,253,096,936 ( 700.078)	  265,890,524,883 ( 702.839)
branch-misses                   784,991,589 (   0.30%)	      729,196,689 (   0.27%)
jobs8                              perfstat
stalled-cycles-frontend     440,248,299,870 (  36.92%)	  509,554,793,816 (  42.46%)
stalled-cycles-backend      222,575,930,616 (  18.67%)	  213,401,248,432 (  17.78%)
instructions              1,542,262,045,114 (    1.29)	1,545,233,932,257 (    1.29)
branches                    299,775,178,439 ( 697.666)	  300,528,458,505 ( 694.769)
branch-misses                   847,496,084 (   0.28%)	      748,794,308 (   0.25%)
jobs9                              perfstat
stalled-cycles-frontend     506,269,882,480 (  37.86%)	  592,798,032,820 (  44.43%)
stalled-cycles-backend      253,192,498,861 (  18.93%)	  233,727,666,185 (  17.52%)
instructions              1,721,985,080,913 (    1.29)	1,724,666,236,005 (    1.29)
branches                    334,517,360,255 ( 694.134)	  335,199,758,164 ( 697.131)
branch-misses                   873,496,730 (   0.26%)	      815,379,236 (   0.24%)
jobs10                             perfstat
stalled-cycles-frontend     549,063,363,749 (  37.18%)	  651,302,376,662 (  43.61%)
stalled-cycles-backend      281,680,986,810 (  19.07%)	  277,005,235,582 (  18.55%)
instructions              1,901,859,271,180 (    1.29)	1,906,311,064,230 (    1.28)
branches                    369,398,536,153 ( 694.004)	  370,527,696,358 ( 688.409)
branch-misses                   967,929,335 (   0.26%)	      890,125,056 (   0.24%)

                            BASE           PATCHED
seconds elapsed        79.421641008	78.735285546
seconds elapsed        61.471246133	60.869085949
seconds elapsed        62.317058173	62.224188495
seconds elapsed        60.030739363	60.081102518
seconds elapsed        74.070398362	74.317582865
seconds elapsed        84.985953007	85.414364176
seconds elapsed        97.724553255	98.173311344
seconds elapsed        109.488066758	110.268399318
seconds elapsed        122.768189405	122.967164498
seconds elapsed        135.130035105	136.934770801

On my other system (8 x86_64 CPUs, short version of test results):

                            BASE           PATCHED
seconds elapsed        19.518065994	19.806320662
seconds elapsed        15.172772749	15.594718291
seconds elapsed        13.820925970	13.821708564
seconds elapsed        13.293097816	14.585206405
seconds elapsed        16.207284118	16.064431606
seconds elapsed        17.958376158	17.771825767
seconds elapsed        19.478009164	19.602961508
seconds elapsed        21.347152811	21.352318709
seconds elapsed        24.478121126	24.171088735
seconds elapsed        26.865057442	26.767327618

So performance-wise the numbers are quite similar.

Also update zcomp interface to be more aligned with the crypto API.

[1] http://marc.info/?l=linux-kernel&m=144480832108927&w=2
[2] http://marc.info/?l=linux-kernel&m=145379613507518&w=2
[3] https://github.com/sergey-senozhatsky/zram-perf-test

Link: http://lkml.kernel.org/r/20160531122017.2878-3-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Suggested-by: NMinchan Kim <minchan@kernel.org>
Suggested-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ebaf9ab5
    • S
      zram: rename zstrm find-release functions · 2aea8493
      由 Sergey Senozhatsky 提交于 
      This has started as a 'add zlib support' work, but after some thinking I
saw no blockers for a bigger change -- a switch to crypto API.

We don't have an idle zstreams list anymore and our write path now works
absolutely differently, preventing preemption during compression.  This
removes possibilities of read paths preempting writes at wrong places
and opens the door for a move from custom LZO/LZ4 compression backends
implementation to a more generic one, using crypto compress API.

This patch set also eliminates the need of a new context-less crypto API
interface, which was quite hard to sell, so we can move along faster.

benchmarks:

(x86_64, 4GB, zram-perf script)

perf reported run-time fio (max jobs=3).  I performed fio test with the
increasing number of parallel jobs (max to 3) on a 3G zram device, using
`static' data and the following crypto comp algorithms:

	842, deflate, lz4, lz4hc, lzo

the output was:

 - test running time (which can tell us what algorithms performs faster)

and

 - zram mm_stat (which tells the compressed memory size, max used memory, etc).

It's just for information.  for example, LZ4HC has twice the running
time of LZO, but the compressed memory size is: 23592960 vs 34603008
bytes.

  test-fio-zram-842
     197.907655282 seconds time elapsed
     201.623142884 seconds time elapsed
     226.854291345 seconds time elapsed
  test-fio-zram-DEFLATE
     253.259516155 seconds time elapsed
     258.148563401 seconds time elapsed
     290.251909365 seconds time elapsed
  test-fio-zram-LZ4
      27.022598717 seconds time elapsed
      29.580522717 seconds time elapsed
      33.293463430 seconds time elapsed
  test-fio-zram-LZ4HC
      56.393954615 seconds time elapsed
      74.904659747 seconds time elapsed
     101.940998564 seconds time elapsed
  test-fio-zram-LZO
      28.155948075 seconds time elapsed
      30.390036330 seconds time elapsed
      34.455773159 seconds time elapsed

zram mm_stat-s (max fio jobs=3)

  test-fio-zram-842
  mm_stat (jobs1): 3221225472 673185792 690266112        0 690266112        0        0
  mm_stat (jobs2): 3221225472 673185792 690266112        0 690266112        0        0
  mm_stat (jobs3): 3221225472 673185792 690266112        0 690266112        0        0
  test-fio-zram-DEFLATE
  mm_stat (jobs1): 3221225472  24379392  37761024        0  37761024        0        0
  mm_stat (jobs2): 3221225472  24379392  37761024        0  37761024        0        0
  mm_stat (jobs3): 3221225472  24379392  37761024        0  37761024        0        0
  test-fio-zram-LZ4
  mm_stat (jobs1): 3221225472  23592960  37761024        0  37761024        0        0
  mm_stat (jobs2): 3221225472  23592960  37761024        0  37761024        0        0
  mm_stat (jobs3): 3221225472  23592960  37761024        0  37761024        0        0
  test-fio-zram-LZ4HC
  mm_stat (jobs1): 3221225472  23592960  37761024        0  37761024        0        0
  mm_stat (jobs2): 3221225472  23592960  37761024        0  37761024        0        0
  mm_stat (jobs3): 3221225472  23592960  37761024        0  37761024        0        0
  test-fio-zram-LZO
  mm_stat (jobs1): 3221225472  34603008  50335744        0  50335744        0        0
  mm_stat (jobs2): 3221225472  34603008  50335744        0  50335744        0        0
  mm_stat (jobs3): 3221225472  34603008  50335744        0  50339840        0        0

This patch (of 8):

We don't perform any zstream idle list lookup anymore, so
zcomp_strm_find()/zcomp_strm_release() names are not representative.

Rename to zcomp_stream_get()/zcomp_stream_put().

Link: http://lkml.kernel.org/r/20160531122017.2878-2-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2aea8493
    • V
      mm: oom: add memcg to oom_control · 2a966b77
      由 Vladimir Davydov 提交于 
      It's a part of oom context just like allocation order and nodemask, so
let's move it to oom_control instead of passing it in the argument list.

Link: http://lkml.kernel.org/r/40e03fd7aaf1f55c75d787128d6d17c5a71226c2.1464358556.git.vdavydov@virtuozzo.comSigned-off-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2a966b77
    • R
      memory-hotplug: use zone_can_shift() for sysfs valid_zones attribute · a371d9f1
      由 Reza Arbab 提交于 
      Since zone_can_shift() is being used to validate the target zone during
onlining, it should also be used to determine the content of
valid_zones.

Link: http://lkml.kernel.org/r/1462816419-4479-4-git-send-email-arbab@linux.vnet.ibm.comSigned-off-by: NReza Arbab <arbab@linux.vnet.ibm.com>
Reviewd-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Chen Yucong <slaoub@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Zhang Zhen <zhenzhang.zhang@huawei.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a371d9f1
    • A
      fbmon: remove unused function argument · 3bd96463
      由 Arnd Bergmann 提交于 
      When building with "make W=1", we get a warning about an empty stub
function that does nothing but reassign its one of its arguments:

  drivers/video/fbdev/core/fbmon.c: In function 'fb_edid_to_monspecs':
  drivers/video/fbdev/core/fbmon.c:1497:67: error: parameter 'specs' set but not used [-Werror=unused-but-set-parameter]

We can simply make that function completely empty to avoid the warning.

This prevents a warning which everyone will see after "CFLAGS: add
-Wunused-but-set-parameter" is merged.

Link: http://lkml.kernel.org/r/20160715203229.1771162-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3bd96463
    • B
      net/mlx5_core/health: Remove deprecated create_singlethread_workqueue · 0a91605c
      由 Bhaktipriya Shridhar 提交于 
      The workqueue health->wq was used as per device private health thread.
This was done to perform delayed work.

The workqueue has a single workitem(&health->work) and
hence doesn't require ordering. It is involved in handling the health of
the device and is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.

Work item has been flushed in mlx5_health_cleanup() to ensure that
there are no pending tasks while disconnecting the driver.
Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0a91605c
    • B
      macsec: ensure rx_sa is set when validation is disabled · e3a3b626
      由 Beniamino Galvani 提交于 
      macsec_decrypt() is not called when validation is disabled and so
macsec_skb_cb(skb)->rx_sa is not set; but it is used later in
macsec_post_decrypt(), ensure that it's always initialized.

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: NBeniamino Galvani <bgalvani@redhat.com>
Acked-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e3a3b626
  7. 26 7月, 2016 10 次提交