提交 8c151963 编写于 作者: I Iyappan Subramanian 提交者: David S. Miller

drivers: net: xgene: Use exported functions

This patch reuses the mdio read/write and phy_register functions
and removed the local definitions.
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Tested-by: NFushen Chen <fchen@apm.com>
Tested-by: NToan Le <toanle@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 47c62b6d
......@@ -381,59 +381,6 @@ static void xgene_enet_rd_mcx_mac(struct xgene_enet_pdata *pdata,
rd_addr);
}
static int xgene_mii_phy_write(struct xgene_enet_pdata *pdata, int phy_id,
u32 reg, u16 data)
{
u32 addr = 0, wr_data = 0;
u32 done;
u8 wait = 10;
PHY_ADDR_SET(&addr, phy_id);
REG_ADDR_SET(&addr, reg);
xgene_enet_wr_mcx_mac(pdata, MII_MGMT_ADDRESS_ADDR, addr);
PHY_CONTROL_SET(&wr_data, data);
xgene_enet_wr_mcx_mac(pdata, MII_MGMT_CONTROL_ADDR, wr_data);
do {
usleep_range(5, 10);
xgene_enet_rd_mcx_mac(pdata, MII_MGMT_INDICATORS_ADDR, &done);
} while ((done & BUSY_MASK) && wait--);
if (done & BUSY_MASK) {
netdev_err(pdata->ndev, "MII_MGMT write failed\n");
return -EBUSY;
}
return 0;
}
static int xgene_mii_phy_read(struct xgene_enet_pdata *pdata,
u8 phy_id, u32 reg)
{
u32 addr = 0;
u32 data, done;
u8 wait = 10;
PHY_ADDR_SET(&addr, phy_id);
REG_ADDR_SET(&addr, reg);
xgene_enet_wr_mcx_mac(pdata, MII_MGMT_ADDRESS_ADDR, addr);
xgene_enet_wr_mcx_mac(pdata, MII_MGMT_COMMAND_ADDR, READ_CYCLE_MASK);
do {
usleep_range(5, 10);
xgene_enet_rd_mcx_mac(pdata, MII_MGMT_INDICATORS_ADDR, &done);
} while ((done & BUSY_MASK) && wait--);
if (done & BUSY_MASK) {
netdev_err(pdata->ndev, "MII_MGMT read failed\n");
return -EBUSY;
}
xgene_enet_rd_mcx_mac(pdata, MII_MGMT_STATUS_ADDR, &data);
xgene_enet_wr_mcx_mac(pdata, MII_MGMT_COMMAND_ADDR, 0);
return data;
}
static void xgene_gmac_set_mac_addr(struct xgene_enet_pdata *pdata)
{
u32 addr0, addr1;
......@@ -762,28 +709,6 @@ static void xgene_gport_shutdown(struct xgene_enet_pdata *pdata)
}
}
static int xgene_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
{
struct xgene_enet_pdata *pdata = bus->priv;
u32 val;
val = xgene_mii_phy_read(pdata, mii_id, regnum);
netdev_dbg(pdata->ndev, "mdio_rd: bus=%d reg=%d val=%x\n",
mii_id, regnum, val);
return val;
}
static int xgene_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
u16 val)
{
struct xgene_enet_pdata *pdata = bus->priv;
netdev_dbg(pdata->ndev, "mdio_wr: bus=%d reg=%d val=%x\n",
mii_id, regnum, val);
return xgene_mii_phy_write(pdata, mii_id, regnum, val);
}
static void xgene_enet_adjust_link(struct net_device *ndev)
{
struct xgene_enet_pdata *pdata = netdev_priv(ndev);
......@@ -888,8 +813,8 @@ static int xgene_mdiobus_register(struct xgene_enet_pdata *pdata,
struct phy_device *phy;
struct device_node *child_np;
struct device_node *mdio_np = NULL;
u32 phy_addr;
int ret;
u32 phy_id;
if (dev->of_node) {
for_each_child_of_node(dev->of_node, child_np) {
......@@ -916,21 +841,17 @@ static int xgene_mdiobus_register(struct xgene_enet_pdata *pdata,
if (ret)
return ret;
ret = device_property_read_u32(dev, "phy-channel", &phy_id);
ret = device_property_read_u32(dev, "phy-channel", &phy_addr);
if (ret)
ret = device_property_read_u32(dev, "phy-addr", &phy_id);
ret = device_property_read_u32(dev, "phy-addr", &phy_addr);
if (ret)
return -EINVAL;
phy = get_phy_device(mdio, phy_id, false);
if (IS_ERR(phy))
phy = xgene_enet_phy_register(mdio, phy_addr);
if (!phy)
return -EIO;
ret = phy_device_register(phy);
if (ret)
phy_device_free(phy);
else
pdata->phy_dev = phy;
pdata->phy_dev = phy;
return ret;
}
......@@ -946,12 +867,12 @@ int xgene_enet_mdio_config(struct xgene_enet_pdata *pdata)
return -ENOMEM;
mdio_bus->name = "APM X-Gene MDIO bus";
mdio_bus->read = xgene_enet_mdio_read;
mdio_bus->write = xgene_enet_mdio_write;
mdio_bus->read = xgene_mdio_rgmii_read;
mdio_bus->write = xgene_mdio_rgmii_write;
snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s-%s", "xgene-mii",
ndev->name);
mdio_bus->priv = pdata;
mdio_bus->priv = (void __force *)pdata->mcx_mac_addr;
mdio_bus->parent = &pdata->pdev->dev;
ret = xgene_mdiobus_register(pdata, mdio_bus);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册