Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub).
The ML7223 IOH is for MP(Media Phone) use.
The ML7223 is companion chip for Intel Atom E6xx series.
The ML7223 is completely compatible for Intel EG20T PCH.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The Xilinx PS Uart is used on the new ARM based SoC. This
UART is not compatible with others such that a seperate
driver is required.
Signed-off-by: NJohn Linn <john.linn@xilinx.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It absolutely needs to be able to get at pdev_archdata members
which are sparc specific.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>

This driver supports UART-DM HW on MSM platforms. It uses the on
chip DMA to drive data transfers and has optional support for UART
power management independent of Linux suspend/resume and wakeup
from Rx.

The driver was originally developed by Google. It is functionally
equivalent to the version available at:
http://android.git.kernel.org/?p=kernel/experimental.git
the differences being:
1) Remove wakelocks and change unsupported DMA API.
2) Replace clock selection register codes by macros.
3) Fix checkpatch errors and add inline documentation.
4) Add runtime PM hooks for active power state transitions.
5) Handle error path and cleanup resources if required.

CC: Nick Pelly <npelly@google.com>
Signed-off-by: NSankalp Bose <sankalpb@codeaurora.org>
Signed-off-by: NMayank Rana <mrana@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch changes dependency of ARCH_EXYNOS4 from ARCH_S5PV310
according to the change of ARCH name, EXYNOS4.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

msm_smd_tty driver provides tty device interface
to 'DS' and 'GPSNMEA' streaming SMD ports.

Cc: Brian Swetland <swetland@google.com>
Signed-off-by: NNiranjana Vishwanathapura <nvishwan@codeaurora.org>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

PCH_DMA is not always enabled when a user uses PCH_UART.
Since overhead of DMA is not small, in case of low frequent
communication, without DMA is better.
Thus, "select PCH_DMA" and DMADEVICES are unnecessary
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Support ML7213 device of OKI SEMICONDUCTOR.
ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment).
ML7213 is completely compatible for Intel EG20T PCH.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

lh7a40x has only been receiving updates for updates to generic code.
The last involvement from the maintainer according to the git logs was
in 2006.  As such, it is a maintainence burden with no benefit.

This gets rid of two defconfigs.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix build errors by selecting SERIAL_CORE:

ERROR: "uart_register_driver" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_write_wakeup" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_update_timeout" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_get_divisor" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_get_baud_rate" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_add_one_port" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_unregister_driver" [drivers/tty/serial/apbuart.ko] undefined!
ERROR: "uart_remove_one_port" [drivers/tty/serial/apbuart.ko] undefined!
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Rather than maintain Kconfig entries where people have to enter raw
numbers and hardcode lists of addresses/pins in the driver itself,
push it all to platform resources.  This lets us simplify the driver,
the Kconfig, and gives board porters greater flexibility.

In the process, we need to also start supporting the early platform
interface.  Not a big deal, but it causes the patch to be bigger than
a simple resource relocation.

All the Blackfin boards already have their resources updated and in
place for this change.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Some OF drivers could likely be used on non-powerpc OF based platforms,
so fix the kconfig depends to be CONFIG_OF instead of CONFIG_PPC_OF.

Compile tested on ARM and sparc.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

The dma_request_channel/dma_release_channel interfaces are not
built when DMADEVICES is not enabled, so make the driver depend on
DMADEVICES.  Also, the help text says that the driver enables & uses
PCH_DMA, which is not enabled, so select that.

ERROR: "__dma_request_channel" [drivers/serial/pch_uart.ko] undefined!
ERROR: "dma_release_channel" [drivers/serial/pch_uart.ko] undefined!
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Reported-by: NZimny Lech <napohybelskurwysynom2010@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

UART driver of Intel EG20T(Topcliff) PCH

Intel EG20T PCH is the platform controller hub that is going to be used in
Intel's general embedded platform. All IO peripherals in
Intel EG20T PCH are actually devices sitting on AMBA bus.
Intel EG20T PCH has UART I/F. Using this I/F, it is able to access system
devices connected to UART.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Correct the KConfig as noted by Greg.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds a driver for the serial ports found in VIA and WonderMedia
Systems-on-Chip. Interrupt-driven FIFO operation is implemented.
The hardware also supports pure register-based operation (which is
slower) and DMA-based FIFO operation. As the FIFOs are only 16 bytes
long, DMA operation is probably not worth the hassle.
Signed-off-by: NAlexey Charkov <alchark@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Prototype driver for the IFX6x60 series of SPI attached modems by Jim
Stanley and Russ Gorby
Signed-off-by: NRuss Gorby <richardx.r.gorby@intel.com>

[Some reworking and a major cleanup]
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

And while we are at it allow it to fail to find one. Without this the IRQ
option will cause the 3110 driver to fail on 0.7 SFI firmware.
Acked-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds UART serial port support for S5P6450 SoC.
The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5.
And to fix membase which is in serial/samsung.c is from Ben Dooks.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>

This patch adds driver support for OMAP2/3/4 high speed UART.

The driver is made separate from 8250 driver as we cannot
over load 8250 driver with omap platform specific configuration for
features like DMA, it makes easier to implement features like DMA and
hardware flow control and software flow control configuration with
this driver as required for the omap-platform.
This patch involves only the core driver and its dependent.

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: NGovindraj.R <govindraj.raja@ti.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>

This is a PCI & UART driver, which suppors both PIO and DMA mode
UART operation. It has 3 identical UART ports and one internal
DMA controller.

Current FW will export 4 pci devices for hsu: 3 uart ports and 1
dma controller, each has one IRQ line. And we need to discuss the
device model, one PCI device covering whole HSU should be a better
model, but there is a problem of how to export the 4 IRQs info

Current driver set the highest baud rate to 2746800bps, which is
easy to scale down to 115200/230400.... To suport higher baud rate,
we need add special process, change DLAB/DLH/PS/DIV/MUL registers
all together.

921600 is the highest baud rate that has been tested with Bluetooth
modem connected to HSU port 0. Will test more when there is right
BT firmware.

Current version contains several work around for A0's Silicon bugs
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

At the moment there is only one platform type supported and there is is
hard wired, but with these changes the infrastructure is now there for
anyone else to provide methods for their hardware.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This device is used by some of the Intel MID platforms. It's not similar
enough to the MAX3100 to use the same driver.

At this point the driver is specific to the platform and not generalised.
We will fix that later.
Signed-off-by: Njianwei.yang <jianwei.yang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This driver enable the max3110 device, it can be used as
a system console. the IRQ needs be enabled if user want a
better performance. MRST max3110 works in 3.684MHz clock,
which supports 230400 as its maximum rate.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove the SERIAL_8250_AU1X00 config symbol.  Instead, use the MIPS_ALCHEMY
one which is always defined when building an Au1x00-based platform.
Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Linux-serial <linux-serial@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/1461/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This one depends on a previous patch (which removes SOC_AU1X00 and changes
MACH_ALCHEMY) to apply cleanly (and then actually work), so I'd love for
this to go in via the mips tree.

Remove the CONFIG_SOC_AU1X00 Kconfig symbol since its job can also be done
by MACH_ALCHEMY, now renamed to MIPS_ALCHEMY.
Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/1461/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds UART serial port support for S5PV310.
In the case of that serial device has just one clock source, driver can not
control clock source. So add check function in get_clksrc and set_clksrc.
Signed-off-by: NJongpill Lee <boyko.lee@samsung.com>
Acked-by: NChanghwan Youn <chaos.youn@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add an UART driver for the UART component available as a SOPC (System on
Programmable Chip) component for Altera FPGAs.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add an UART driver for the JTAG UART component available as a SOPC
(System on Programmable Chip) component for Altera FPGAs.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The BF54xM procs imply the related BF54x define, so no need to check both.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Should be stable now ...
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some people need flow control on their ports, so now boards can support
that via any GPIOs.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove unnecessary Kconfig entry. S5PC100 has exactly the same driver as
S3C6400/S3C6410/S5P6440.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

UARTs in the S3C2416 are almost same as in S3C2443 and can be handled by
s3c2440 serial driver.
Signed-off-by: NYauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

MFD_TIMBERDALE doesn't appear to be defined anywhere. However the code in
question can build happily without platform specifics so remove the check
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fit blackfin uart over sport driver into common uart inftrastructure.  It
is based on the early platform interfaces to get the platform data early
when the console is initilized.

1. Enable sport uart driver to change uart baud, data bit, stop bit at
   runtime.  Bind the index of uart device nodes to physical index of
   sports.

2. Move all platform data into arch specific board files.  Register
   and probe platform device data in both early and normal stages.

3. Console is registered in sport uart driver as well.

4. Remove 500 us block waiting in sport tx stop code by putting a
   dummy data into tx fifo to make sure the sport tx stops when all bytes
   are shifted out except for the dummy data.

5. clean up a bit and fix up coding style.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Support using DMA for sending and receiving data over SCI(F) interfaces of
various SH SoCs.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add platform driver support to the pmac-zilog driver, for m68k macs.
Place the powermac-specific code inside #ifdef CONFIG_PPC_PMAC.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

The recent changes in the UART code mean that we need to ensure that
the 4 UART case is only selected if S5PV210 is being compiled.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>