Add the necessary set of commands to support OpenGL
indirect draw calls on evergreen/cayman devices that
do not have VM.

v2: agd5f: fix warning on 32-bit
Reviewed-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NGlenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows importing dma_reservation_objects from a dma-buf.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>

v2: Don't forget git add, noticed by David.

Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NDavid Herrmann <dh.herrmann@gmail.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Now that we've removed the copypasted users in gem/ttm we can
relegate the legacy buffer mapping support to where it belongs.
Also give it the proper drm_legacy_ prefix.

While at it statify drm_mmap_locked, somehow I've missed that in my
previous header rework.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add a module parameter to disable the radeon GPU backlight
controller to override the automatic detection.  Some
laptops seems to indicate that they use the integrated
controller, but appear to actually use an external
controller.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=81382

v2: fix module parameter description
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It was causing display corruption with R300 generation GPUs at least.
Reported-and-Tested-by: NMikael Pettersson <mikpelinux@gmail.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Powering off a hot-pluggable device, e.g., with pci_set_power_state(D3cold),
normally generates a hot-remove event that unbinds the driver.

Some drivers expect to remain bound to a device even while they power it
off and back on again.  This can be dangerous, because if the device is
removed or replaced while it is powered off, the driver doesn't know that
anything changed.  But some drivers accept that risk.

Add pci_ignore_hotplug() for use by drivers that know their device cannot
be removed.  Using pci_ignore_hotplug() tells the PCI core that hot-plug
events for the device should be ignored.

The radeon and nouveau drivers use this to switch between a low-power,
integrated GPU and a higher-power, higher-performance discrete GPU.  They
power off the unused GPU, but they want to remain bound to it.

This is a reimplementation of f244d8b6 ("ACPIPHP / radeon / nouveau:
Fix VGA switcheroo problem related to hotplug") but extends it to work with
both acpiphp and pciehp.

This fixes a problem where systems with dual GPUs using the radeon drivers
become unusable, freezing every few seconds (see bugzillas below).  The
resume of the radeon device may also fail, e.g.,

This fixes problems on dual GPU systems where the radeon driver becomes
unusable because of problems while suspending the device, as in bug 79701:

    [drm] radeon: finishing device.
    radeon 0000:01:00.0: Userspace still has active objects !
    radeon 0000:01:00.0: ffff8800cb4ec288 ffff8800cb4ec000 16384 4294967297 force free
    ...
    WARNING: CPU: 0 PID: 67 at /home/apw/COD/linux/drivers/gpu/drm/radeon/radeon_gart.c:234 radeon_gart_unbind+0xd2/0xe0 [radeon]()
    trying to unbind memory from uninitialized GART !

or while resuming it, as in bug 77261:

    radeon 0000:01:00.0: ring 0 stalled for more than 10158msec
    radeon 0000:01:00.0: GPU lockup ...
    radeon 0000:01:00.0: GPU pci config reset
    pciehp 0000:00:01.0:pcie04: Card not present on Slot(1-1)
    radeon 0000:01:00.0: GPU reset succeeded, trying to resume
    *ERROR* radeon: dpm resume failed
    radeon 0000:01:00.0: Wait for MC idle timedout !

Link: https://bugzilla.kernel.org/show_bug.cgi?id=77261
Link: https://bugzilla.kernel.org/show_bug.cgi?id=79701Reported-by: NShawn Starr <shawn.starr@rogers.com>
Reported-by: NJose P. <lbdkmjdf@sharklasers.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NRajat Jain <rajatxjain@gmail.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NDave Airlie <airlied@redhat.com>
CC: stable@vger.kernel.org	# v3.15+

One step closer to dropping all the drm_bus_* code:
Add a driver->set_busid() callback and make all drivers use the generic
helpers. Nouveau is the only driver that uses two different bus-types with
the same drm_driver. This is totally broken if both buses are available on
the same machine (unlikely, but lets be safe). Therefore, we create two
different drivers for each platform during module_init() and set the
set_busid() callback respectively.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add a module paramter to enable bapm on APUs.  It's disabled
by default on certain APUs due to stability issues.  This
option makes it easier to test and to enable it on systems that
are stable.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=81021Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This patch adds an IOCTL for turning a pointer supplied by
userspace into a buffer object.

It imposes several restrictions upon the memory being mapped:

1. It must be page aligned (both start/end addresses, i.e ptr and size).

2. It must be normal system memory, not a pointer into another map of IO
space (e.g. it must not be a GTT mmapping of another object).

3. The BO is mapped into GTT, so the maximum amount of memory mapped at
all times is still the GTT limit.

4. The BO is only mapped readonly for now, so no write support.

5. List of backing pages is only acquired once, so they represent a
snapshot of the first use.

Exporting and sharing as well as mapping of buffer objects created by
this function is forbidden and results in an -EPERM.

v2: squash all previous changes into first public version
v3: fix tabs, map readonly, don't use MM callback any more
v4: set TTM_PAGE_FLAG_SG so that TTM never messes with the pages,
    pin/unpin pages on bind/unbind instead of populate/unpopulate
v5: rebased on 3.17-wip, IOCTL renamed to userptr, reject any unknown
    flags, better handle READONLY flag, improve permission check
v6: fix ptr cast warning, use set_page_dirty/mark_page_accessed on unpin
v7: add warning about it's availability in the API definition
v8: drop access_ok check, fix VM mapping bits
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v4)
Reviewed-by: Jérôme Glisse <jglisse@redhat.com> (v4)
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Skip the "manual" pageflip completion checks via polling and
guessing in the vblank handler radeon_crtc_handle_vblank() on
asics which are known to reliably support hw pageflip completion
irqs. Those pflip irqs are a more reliable and race-free method
of handling pageflip completion detection, whereas the "classic"
polling method has some small races in combination with dpm on,
and with the reworked pageflip implementation since Linux 3.16.

On old asics without pflip irqs, the classic method is used.

On asics with known good pflip irqs, only pflip irqs are used
by default, but a new module parameter "use_pflipirqs" allows to
override this in case we encounter asics in the wild with
unreliable or faulty pflip irqs. A module parameter of 0 allows
to use the classic method only in such a case. A parameter of 1
allows to use both classic method and pflip irqs as additional
band-aid to avoid some small races which could happen with the
classic method alone. The setting 1 gives Linux 3.16 behaviour.

Hw pflip irqs are available since R600.

Tested on DCE-4, AMD Cedar - FirePro 2270.

v2:  agd5f: only enable pflip interrupts on DCE4+ as they are not
reliable on older asics.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: rebase on vm_size scale change. Adjust vm_size default to 8,
    Better handle the default and smaller values.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This ensures the GPU sees all previous CPU writes to VRAM, which makes it
safe:

* For userspace to stream data from CPU to GPU via VRAM instead of GTT
* For IBs to be stored in VRAM instead of GTT
* For ring buffers to be stored in VRAM instead of GTT, if the HPD flush
  is performed via MMIO
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VM sizes smaller than 1GB doesn't make much sense anyway.

v2: fix typo and grammer
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds the interface between the radeon driver and the amdkfd driver.
The interface implementation is contained in radeon_kfd.c and radeon_kfd.h.

The interface itself is represented by a pointer to struct
kfd_dev. The pointer is located inside radeon_device structure.

All the register accesses that amdkfd need are done using this interface. This
allows us to avoid direct register accesses in amdkfd proper,  while also
avoiding locking between amdkfd and radeon.

The single exception is the doorbells that are used in both of the drivers.
However, because they are located in separate pci bar pages, the danger of
sharing registers between the drivers is minimal.

Having said that, we are planning to move the doorbells as well to radeon.

v3:

Add interface for sa manager init and fini. The init function will allocate a
buffer on system memory and pin it to the GART address space via the radeon sa
manager.

All mappings of buffers to GART address space are done via the radeon sa
manager. The interface of allocate memory will use the radeon sa manager to sub
allocate from the single buffer that was allocated during the init function.

Change lower_32/upper_32 calls to use linux macros

Add documentation for the interface

v4:

Change ptr field type in kgd_mem from uint32_t* to void* to match to type that
is returned by radeon_sa_bo_cpu_addr

v5:

Change format of mqd structure to work with latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime.
Move generic kfd-->kgd interface and other generic kgd definitions to a generic
header file that will be used by AMD's radeon and amdgpu drivers
Signed-off-by: NOded Gabbay <oded.gabbay@amd.com>

This allows reservation objects to be used in dma-buf. it's required
for implementing polling support on the fences that belong to a dma-buf.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> #drivers/media/v4l2-core/
Acked-by: Thomas Hellstrom <thellstrom@vmware.com> #drivers/gpu/drm/ttm
Acked-by: NSumit Semwal <sumit.semwal@linaro.org>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> #drivers/gpu/drm/armada/
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Some monitors seem to have problems with deep color enabled, even
though they claim to support it.  I'm not sure if the monitor
need a quirk or if the driver is doing something the monitor doesn't
like.  At this point lets just disable deep color by default like
we did for hdmi audio and work through the bugs so we can eventually
enable it by default.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=80531Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Query to find out how many compute units on a GPU.
Useful for OpenCL usermode drivers.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: agd5f: simplify patch
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Especially not on modesetting drivers - this is used to size
the driver private structure for legacy drm buffers.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Don't try and runtime suspend the APU in PX systems.  We
only want to power down the dGPU.

v2: fix harder
v3: fix stupid typo
v4: consolidate runpm enablement to a single flag

bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=75127
https://bugzilla.kernel.org/show_bug.cgi?id=72701Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NLauri Kasanen <cand@gmx.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Same fix as for nouveau, when we fail with EINVAL, subsequent
gets fail hard, causing the device not to open.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Same fix as for nouveau, when we fail with EINVAL, subsequent
gets fail hard, causing the device not to open.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

This fixes fast color clear with 1D-tiled single-sample surfaces
and Hyper-Z corruption with 1D-tiled depth surfaces.

Even though it seems it is not needed for 1D tiling, CMASK and HTILE are
always 2D-tiled, thus the hw needs to know the actual pipe configuration
for CMASK and HTILE addressing no matter what the tiling mode of the surface
is.
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

When passing buffers between processes, the receiving process needs to know
the original buffer domain, so that it doesn't accidentally move the buffer.

v2: reserve the buffer
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

the evergreen CS parser has allowed this for a while, just port
the code to the r600 one.

This is required before geom shaders can be made work.

v2: agd5f: minor cleanup and add additional 7xx reg.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Prevent runtime suspend of non-PX GPUs.  Runtime suspend is
not what we want in those cases.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Preparation for moving the early vblank IRQ logic into
radeon_get_crtc_scanoutpos().

v2: Fix radeon_drv.c compile warning (Mario)

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Enabling this parameter enables pci config reset,
aka hard reset, which is a bus level chip reset.
In some cases this works more reliably than a soft
reset.  Disabled by default.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Note when CIK DCE tiling was fixed.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

I've killed them a long time ago in drm/i915, let's get rid of this
remnant of shared drm core days for good.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This causes a race condition between drm_dev_unregister()
and pci_driver.shutdown at shutdown or driver unload time.

We need to revisit how to properly support kexec within
the drm.

This reverts commit 846ae41a.

This is required to properly calculate the tiling parameters
in userspace.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move the ktime_get() clock readouts and potential preempt_disable()
calls from drm core into kms driver to make it compatible with the
api changes in the drm core.

This should not introduce any change in functionality or behaviour
in radeon-kms, just a reshuffling of code.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Currently radeon devices are not properly shutdown during kexec. This
causes a varity of issues, e.g. dpm initialization failures.
Fix this by implementing a radeon_pci_shutdown function, that unloads
the driver cleanly.
Signed-off-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This hooks radeon up to the runtime PM system to enable
dynamic power management for secondary GPUs in switchable
and powerxpress laptops.

v2: agd5f: clean up, add module parameter
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is a pre-requisite for runtime pm on powerxpress systems.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In 3.12 I changed audio to be enabled by default,
but you still had to turn it on via xrandr.  This
was confusing to users so change it to minic the
previous behavior:

- audio option is set to -1 (auto) by default which is
  the current 3.12 behavior (audio is enabled but requires
  xrandr to turn it on).
- if audio = 1, the audio is enabled without needing
  to mess with xrandr (previous behavior)
- audio = 0 disables audio

It retains the new feature of allowing the user to enable
audio on the fly with xrandr, but turns audio on
automatically if radeon.audio=1 is set which is what
most users expect.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>