drm: Pass 'flags' from the caller to .get_scanout_position()

Preparation for moving the early vblank IRQ logic into
radeon_get_crtc_scanoutpos().

v2: Fix radeon_drv.c compile warning (Mario)

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

drivers/gpu/drm/drm_irq.c

@@ -586,7 +586,7 @@ int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, int crtc,
 		 * Get vertical and horizontal scanout position vpos, hpos,
 		 * and bounding timestamps stime, etime, pre/post query.
 		 */
-		vbl_status = dev->driver->get_scanout_position(dev, crtc, &vpos,
+		vbl_status = dev->driver->get_scanout_position(dev, crtc, flags, &vpos,
 							       &hpos, &stime, &etime);
 
 		/*

drivers/gpu/drm/i915/i915_irq.c

@@ -675,7 +675,8 @@ static bool intel_pipe_in_vblank_locked(struct drm_device *dev, enum pipe pipe)
 }
 
 static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
-			     int *vpos, int *hpos, ktime_t *stime, ktime_t *etime)
+				    unsigned int flags, int *vpos, int *hpos,
+				    ktime_t *stime, ktime_t *etime)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];

drivers/gpu/drm/radeon/radeon_display.c

@@ -306,7 +306,7 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id)
 	 * to complete in this vblank?
 	 */
 	if (update_pending &&
-	    (DRM_SCANOUTPOS_VALID & radeon_get_crtc_scanoutpos(rdev->ddev, crtc_id,
+	    (DRM_SCANOUTPOS_VALID & radeon_get_crtc_scanoutpos(rdev->ddev, crtc_id, 0,
 							       &vpos, &hpos, NULL, NULL)) &&
 	    ((vpos >= (99 * rdev->mode_info.crtcs[crtc_id]->base.hwmode.crtc_vdisplay)/100) ||
 	     (vpos < 0 && !ASIC_IS_AVIVO(rdev)))) {
@@ -1610,6 +1610,7 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
  *
  * \param dev Device to query.
  * \param crtc Crtc to query.
+ * \param flags Flags from caller (DRM_CALLED_FROM_VBLIRQ or 0).
  * \param *vpos Location where vertical scanout position should be stored.
  * \param *hpos Location where horizontal scanout position should go.
  * \param *stime Target location for timestamp taken immediately before
@@ -1631,8 +1632,8 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
  * unknown small number of scanlines wrt. real scanout position.
  *
  */
-int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, int *vpos, int *hpos,
-			       ktime_t *stime, ktime_t *etime)
+int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, unsigned int flags,
+			       int *vpos, int *hpos, ktime_t *stime, ktime_t *etime)
 {
 	u32 stat_crtc = 0, vbl = 0, position = 0;
 	int vbl_start, vbl_end, vtotal, ret = 0;

drivers/gpu/drm/radeon/radeon_drv.c

@@ -109,6 +109,7 @@ int radeon_gem_object_open(struct drm_gem_object *obj,
 void radeon_gem_object_close(struct drm_gem_object *obj,
 				struct drm_file *file_priv);
 extern int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc,
+				      unsigned int flags,
 				      int *vpos, int *hpos, ktime_t *stime,
 				      ktime_t *etime);
 extern const struct drm_ioctl_desc radeon_ioctls_kms[];

drivers/gpu/drm/radeon/radeon_mode.h

@@ -800,6 +800,7 @@ extern int radeon_crtc_cursor_move(struct drm_crtc *crtc,
 				   int x, int y);
 
 extern int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc,
+				      unsigned int flags,
 				      int *vpos, int *hpos, ktime_t *stime,
 				      ktime_t *etime);
 

drivers/gpu/drm/radeon/radeon_pm.c

@@ -1482,7 +1482,7 @@ static bool radeon_pm_in_vbl(struct radeon_device *rdev)
 	 */
 	for (crtc = 0; (crtc < rdev->num_crtc) && in_vbl; crtc++) {
 		if (rdev->pm.active_crtcs & (1 << crtc)) {
-			vbl_status = radeon_get_crtc_scanoutpos(rdev->ddev, crtc, &vpos, &hpos, NULL, NULL);
+			vbl_status = radeon_get_crtc_scanoutpos(rdev->ddev, crtc, 0, &vpos, &hpos, NULL, NULL);
 			if ((vbl_status & DRM_SCANOUTPOS_VALID) &&
 			    !(vbl_status & DRM_SCANOUTPOS_INVBL))
 				in_vbl = false;

include/drm/drmP.h

@@ -845,6 +845,7 @@ struct drm_driver {
 	 *
 	 * \param dev  DRM device.
 	 * \param crtc Id of the crtc to query.
+	 * \param flags Flags from the caller (DRM_CALLED_FROM_VBLIRQ or 0).
 	 * \param *vpos Target location for current vertical scanout position.
 	 * \param *hpos Target location for current horizontal scanout position.
 	 * \param *stime Target location for timestamp taken immediately before
@@ -867,6 +868,7 @@ struct drm_driver {
 	 *
 	 */
 	int (*get_scanout_position) (struct drm_device *dev, int crtc,
+				     unsigned int flags,
 				     int *vpos, int *hpos, ktime_t *stime,
 				     ktime_t *etime);