- 21 9月, 2009 1 次提交
-
-
由 Uwe Kleine-Koenig 提交于
Signed-off-by: NUwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 20 9月, 2009 2 次提交
-
-
由 Sam Ravnborg 提交于
Albin Tonnerre <albin.tonnerre@free-electrons.com> reported: Bash 4 filters out variables which contain a dot in them. This happends to be the case of CPPFLAGS_vmlinux.lds. This is rather unfortunate, as it now causes build failures when using SHELL=/bin/bash to compile, or when bash happens to be used by make (eg when it's /bin/sh) Remove the common definition of CPPFLAGS_vmlinux.lds by pushing relevant stuff to either Makefile.build or the arch specific kernel/Makefile where we build the linker script. This is also nice cleanup as we move the information out where it is used. Notes for the different architectures touched: arm - we use an already exported symbol cris - we use a config symbol aleady available [Not build tested] mips - the jiffies complexity has moved to vmlinux.lds.S where we need it. Added a few variables to CPPFLAGS - they are only used by the linker script. [Not build tested] powerpc - removed assignment that is not needed [not build tested] sparc - simplified it using $(BITS) um - introduced a few new exported variables to deal with this xtensa - added options to CPP invocation [not build tested] Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Replace the use of CROSS_COMPILE to select a customized installkernel script with the possibility to set INSTALLKERNEL to select a custom installkernel script when running make: make INSTALLKERNEL=arm-installkernel install With this patch we are now more consistent across different architectures - they did not all support use of CROSS_COMPILE. The use of CROSS_COMPILE was a hack as this really belongs to gcc/binutils and the installkernel script does not change just because we change toolchain. The use of CROSS_COMPILE caused troubles with an upcoming patch that saves CROSS_COMPILE when a kernel is built - it would no longer be installable. [Thanks to Peter Z. for this hint] This patch undos what Ian did in commit: 0f8e2d62 ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh") The patch has been lightly tested on x86 only - but all changes looks obvious. Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin] Acked-by: Russell King <linux@arm.linux.org.uk> [arm] Acked-by: Paul Mundt <lethal@linux-sh.org> [sh] Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86] Cc: Ian Campbell <icampbell@arcom.com> Cc: Tony Luck <tony.luck@intel.com> [ia64] Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64] Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r] Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc] Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390] Cc: Thomas Gleixner <tglx@linutronix.de> [x86] Cc: Ingo Molnar <mingo@redhat.com> [x86] Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 17 8月, 2009 1 次提交
-
-
由 Byungho Min 提交于
S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100" Signed-off-by: NByungho Min <bhmin@samsung.com> [ben-linux@fluff.org: tidy and edit description] Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 15 8月, 2009 1 次提交
-
-
由 Leo Chen 提交于
add bcmring option in Kconfig and add entry in Makefile in arch/arm directory Signed-off-by: NLeo Chen <leochen@broadcom.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 14 8月, 2009 2 次提交
-
-
由 Dmitriy Taychenachev 提交于
Signed-off-by: NDmitriy Taychenachev <dimichxp@gmail.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 24 7月, 2009 2 次提交
-
-
由 Catalin Marinas 提交于
This patch adds the necessary entries to the Makefile and Kconfig files for building the Thumb-2 kernel. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
This patch adds various C and assembler macros that help with using the unified assembler syntax for compiling files to either ARM or Thumb-2 modes. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 03 7月, 2009 1 次提交
-
-
由 Alessandro Rubini 提交于
This patch adds the basic infrastructure for the Nomadik 8815 CPU and the "Nomadik Hardware Kit" NHK8815. This patch only includes the serial console and core stuff, no drivers. Signed-off-by: NAlessandro Rubini <rubini@unipv.it> Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 5月, 2009 1 次提交
-
-
由 Catalin Marinas 提交于
Starting with ARMv6, the CPUs support the BE-8 variant of big-endian (byte-invariant). This patch adds the core support: - setting of the BE-8 mode via the CPSR.E register for both kernel and user threads - big-endian page table walking - REV used to rotate instructions read from memory during fault processing as they are still little-endian format - Kconfig and Makefile support for BE-8. The --be8 option must be passed to the final linking stage to convert the instructions to little-endian Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 29 5月, 2009 1 次提交
-
-
由 Santosh Shilimkar 提交于
This patch updates the Makefile and Kconfig entries for OMAP4. The OMAP4430 SDP board file supports only minimal set of drivers. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 07 5月, 2009 1 次提交
-
-
由 Sascha Hauer 提交于
arch-imx is superseeded by the MXC architecture support. This patch removes arch-imx from the build system. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 29 4月, 2009 1 次提交
-
-
由 Linus Walleij 提交于
This hooks the U300 support into Kbuild and makes a small hook in mmu.c for supporting an odd memory alignment with shared memory on these systems. This is rebased to RMK:s GIT HEAD. This patch tries to add the Kconfig option in alphabetic order by option text and the Makefile entry after config symbol. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 4月, 2009 2 次提交
-
-
由 dmitry pervushin 提交于
Added Kconfig/Makefile entries for STMP platform Signed-off-by: Ndmitry pervushin <dpervushin@embeddedalley.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 26 3月, 2009 1 次提交
-
-
由 Paulius Zaleckas 提交于
Adds support for Cortina Systems Gemini family CPUs: http://www.cortina-systems.com/products/category/18 v3: - fixed __io(a) to be defined as __typesafe_io(a) v2: - #include <asm/io.h> -> <linux/io.h> - remove asm/system.h include - revorked mm.c to use named initializers - removed "empty" dma.h - updated copyrights Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
-
- 25 3月, 2009 1 次提交
-
-
由 Paulius Zaleckas 提交于
Adds support for Faraday FA526 core. This core is used at least by: Cortina Systems Gemini and Centroid family Cavium Networks ECONA family Grain Media GM8120 Pixelplus ImageARM Prolific PL-1029 Faraday IP evaluation boards v2: - move TLB_BTB to separate patch - update copyrights Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
-
- 23 3月, 2009 2 次提交
-
-
由 Eric Miao 提交于
"""The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost .... """ See http://www.marvell.com/featured/pxa168.jsp for more information. 1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core, there are many enhancements like instructions for flushing the whole D-cache, and so on 2. Clock reuses Russell's common clkdev, and added the basic support for UART1/2. 3. Devices are a bit different from the 'mach-pxa' way, the platform devices are now dynamically allocated only when necessary (i.e. when pxa_register_device() is called). Description for each device are stored in an array of 'struct pxa_device_desc'. Now that: a. this array of device description is marked with __initdata and can be freed up system is fully up b. which means board code has to add all needed devices early in his initializing function c. platform specific data can now be marked as __initdata since they are allocated and copied by platform_device_add_data() 4. only the basic UART1/2/3 are added, more devices will come later. Signed-off-by: NJason Chagas <chagas@marvell.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
1. introduce folder of 'arch/arm/plat-pxa' for common code across different PXA processor families 2. initially moved DMA code into plat-pxa 3. common code in <mach/dma.h> moved into <plat/dma.h>, new processors should implement its own <mach/dma.h>, provide the following required definitions and '#include <plat/dma.h>' in the end: - DMAC_REGS_VIRT for mapped virtual address of the DMA registers' physical I/O memory Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
- 19 2月, 2009 1 次提交
-
-
由 Catalin Marinas 提交于
This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 12月, 2008 4 次提交
-
-
由 Paulius Zaleckas 提交于
Adds MX1 architecture to platform MXC. It will supersede mach-imx and let it die. Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: NDarius Augulis <augulis.darius@gmail.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Ben Dooks 提交于
Initial support for the Samsung S3C6410 SoC. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Add the initial PLAT_S3C64XX support files and directory structure. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Initial architecture support for the S3C24A0 ARCH_S3C24A0. We don't yet add an kconfig entry in the main arch/arm/Kconfig file as the series is not complete, so that is left until enough support is in to be useful. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 12 12月, 2008 1 次提交
-
-
由 Nicolas Pitre 提交于
Compilation for the Feroceon core should use -mtune=marvell-f. This is available in Code Sourcery's 2008Q3 release at the moment. Otherwise fall back to -mtune-=xscale. Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
- 04 12月, 2008 1 次提交
-
-
由 wanzongshun 提交于
Add Nuvoton W90X900 ARM9 plat support to linux arm tree, Now, this patch include only W90P910 EVB of W90P910 CPU, Its driver is nothing. Signed-off-by: NWan ZongShun <mcuos.com@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 11月, 2008 1 次提交
-
-
由 Russell King 提交于
The CLPS7500 platform has not built since 2.6.22-git7 and there seems to be no interest in fixing it. So, remove the platform support. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 10月, 2008 1 次提交
-
-
由 Brian Swetland 提交于
The MSM architecture covers a wider family of chips than just the MSM7X00A. Move to a more generic name, in perparation for supporting the specific SoC variants as sub-architectures (ARCH_MSM7X01A, ARCH_MSM722X, etc). This gives us ARCH_MSM for the (many) common peripherals. This also removes the unused/obsolete config item MSM7X00A_IDLE. Signed-off-by: NBrian Swetland <swetland@google.com>
-
- 09 10月, 2008 1 次提交
-
-
由 Syed Mohammed, Khasim 提交于
Add minimal omap3430 support based on earlier patches from Syed Mohammed Khasim. Also merge in omap34xx SRAM support from Karthik Dasu and use consistent naming for sram init functions. Also do following changes that make 34xx support usable: - Remove unused sram.c functions for 34xx - Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally in entry-macro.S - Update mach-omap2/io.c to support 2420, 2430, and 34xx - Also merge in 34xx GPMC changes to add fields wr_access and wr_data_mux_bus from Adrian Hunter - Remove memory initialization call omap2_init_memory() until until more generic memory initialization patches are posted. It's OK to rely on bootloader initialization until then. Signed-off-by: NSyed Mohammed, Khasim <khasim@ti.com> Signed-off-by: Karthik Dasu<karthik-dp@ti.com> Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 08 10月, 2008 1 次提交
-
-
由 Ben Dooks 提交于
First move of items out of include/asm-arm/plat-s3c* to their new homes under arch/arm/plat-s3c/include/plat and arch/arm/plat-s3c24xx/include/plat directories. Note, we have to create a dummy arch/arm/plat-s3c/Makefile to allow us to add arch/arm/plat-s3c/include/plat to the path. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 30 9月, 2008 1 次提交
-
-
由 Catalin Marinas 提交于
The current -march=armv7a is not supported by mainline gcc. Cc: Paul Brook <paul@codesourcery.com> Cc: Wei Zhong <weizhong@broadcom.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 8月, 2008 2 次提交
-
-
由 Russell King 提交于
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 26 7月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch fixes a typo introduced by commit f37f46eb ([ARM] nommu: add ARM946E-S core support). Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NHyok S. Choi <hyok.choi@samsung.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 7月, 2008 1 次提交
-
-
由 Juergen Beisert 提交于
This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. This part adds the global build only. Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
-
- 03 7月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
The config option for building drivers/acorn/char/defkeymap-l7200.c is not present since at least kernel 2.6.0. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 23 6月, 2008 3 次提交
-
-
由 Stanislav Samsonov 提交于
The Marvell Discovery Duo (MV78xx0) is a family of ARM SoCs featuring (depending on the model) one or two Feroceon CPU cores with 512K of L2 cache and VFP coprocessors running at (depending on the model) between 800 MHz and 1.2 GHz, and features a DDR2 controller, two PCIe interfaces that can each run either in x4 or quad x1 mode, three USB 2.0 interfaces, two 3Gb/s SATA II interfaces, a SPI interface, two TWSI interfaces, a crypto accelerator, IDMA/XOR engines, a SPI interface, four UARTs, and depending on the model, two or four gigabit ethernet interfaces. This patch adds basic support for the platform, and allows booting on the MV78x00 development board, with functional UARTs, SATA, PCIe, GigE and USB ports. Signed-off-by: NStanislav Samsonov <samsonov@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Saeed Bishara 提交于
The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface, a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS interface, and IDMA/XOR engines, and depending on the model, also features one or two Gigabit Ethernet interfaces, two SATA II interfaces, one or two TWSI interfaces, one or two UARTs, a TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and an SDIO interface. This patch adds supports for the Marvell DB-88F6281-BP Development Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs, enabling support for the PCIe interface, the USB interface, the ethernet interfaces, the SATA interfaces, the TWSI interfaces, the UARTs, and the NAND controller. Signed-off-by: NSaeed Bishara <saeed@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
The Marvell Loki (88RC8480) is an ARM SoC based on a Feroceon CPU core running at between 400 MHz and 1.0 GHz, and features a 64 bit DDR controller, 512K of internal SRAM, two x4 PCI-Express ports, two Gigabit Ethernet ports, two 4x SAS/SATA controllers, two UARTs, two TWSI controllers, and IDMA/XOR engines. This patch adds support for the Marvell LB88RC8480 Development Board, enabling the use of the PCIe interfaces, the ethernet interfaces, the TWSI interfaces and the UARTs. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-