kbuild: use INSTALLKERNEL to select customized installkernel script

Replace the use of CROSS_COMPILE to select a customized
installkernel script with the possibility to set INSTALLKERNEL
to select a custom installkernel script when running make:

    make INSTALLKERNEL=arm-installkernel install

With this patch we are now more consistent across
different architectures - they did not all support use
of CROSS_COMPILE.

The use of CROSS_COMPILE was a hack as this really belongs
to gcc/binutils and the installkernel script does not change
just because we change toolchain.

The use of CROSS_COMPILE caused troubles with an upcoming patch
that saves CROSS_COMPILE when a kernel is built - it would no
longer be installable.
[Thanks to Peter Z. for this hint]

This patch undos what Ian did in commit:

  0f8e2d62
  ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh")

The patch has been lightly tested on x86 only - but all changes
looks obvious.
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Russell King <linux@arm.linux.org.uk> [arm]
Acked-by: Paul Mundt <lethal@linux-sh.org> [sh]
Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86]
Cc: Ian Campbell <icampbell@arcom.com>
Cc: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64]
Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Cc: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Ingo Molnar <mingo@redhat.com> [x86]
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Documentation/kbuild/kbuild.txt

@@ -65,6 +65,22 @@ INSTALL_PATH
 INSTALL_PATH specifies where to place the updated kernel and system map
 images. Default is /boot, but you can set it to other values.
 
+INSTALLKERNEL
+--------------------------------------------------
+Install script called when using "make install".
+The default name is "installkernel".
+
+The script will be called with the following arguments:
+    $1 - kernel version
+    $2 - kernel image file
+    $3 - kernel map file
+    $4 - default install path (use root directory if blank)
+
+The implmentation of "make install" is architecture specific
+and it may differ from the above.
+
+INSTALLKERNEL is provided to enable the possibility to
+specify a custom installer when cross compiling a kernel.
 
 MODLIB
 --------------------------------------------------

Makefile

@@ -315,6 +315,7 @@ OBJCOPY		= $(CROSS_COMPILE)objcopy
 OBJDUMP		= $(CROSS_COMPILE)objdump
 AWK		= awk
 GENKSYMS	= scripts/genksyms/genksyms
+INSTALLKERNEL  := installkernel
 DEPMOD		= /sbin/depmod
 KALLSYMS	= scripts/kallsyms
 PERL		= perl
@@ -353,7 +354,8 @@ KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 
 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
-export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
+export CPP AR NM STRIP OBJCOPY OBJDUMP
+export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
 export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
 
 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS

arch/arm/Makefile

@@ -279,7 +279,7 @@ define archhelp
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
   echo  '  install       - Install uncompressed kernel'
   echo  '  zinstall      - Install compressed kernel'
-  echo  '                  Install using (your) ~/bin/installkernel or'
-  echo  '                  (distribution) /sbin/installkernel or'
+  echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
+  echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
 endef

arch/arm/boot/install.sh

@@ -21,8 +21,8 @@
 #
 
 # User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 if [ "$(basename $2)" = "zImage" ]; then
 # Compressed install

arch/blackfin/Makefile

@@ -155,7 +155,7 @@ define archhelp
   echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
   echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
   echo  '  install         - Install kernel using'
-  echo  '                     (your) ~/bin/$(CROSS_COMPILE)installkernel or'
-  echo  '                     (distribution) PATH: $(CROSS_COMPILE)installkernel or'
+  echo  '                     (your) ~/bin/$(INSTALLKERNEL) or'
+  echo  '                     (distribution) PATH: $(INSTALLKERNEL) or'
   echo  '                     install to $$(INSTALL_PATH)'
 endef

arch/blackfin/boot/install.sh

@@ -36,9 +36,9 @@ verify "$3"
 
 # User may have a custom install script
 
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if which ${CROSS_COMPILE}installkernel >/dev/null 2>&1; then
-	exec ${CROSS_COMPILE}installkernel "$@"
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if which ${INSTALLKERNEL} >/dev/null 2>&1; then
+	exec ${INSTALLKERNEL} "$@"
 fi
 
 # Default install - same as make zlilo

arch/ia64/install.sh

@@ -21,8 +21,8 @@
 
 # User may have a custom install script
 
-if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
-if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install - same as make zlilo
 

arch/m32r/boot/compressed/install.sh

@@ -24,8 +24,8 @@
 
 # User may have a custom install script
 
-if [ -x /sbin/installkernel ]; then
-  exec /sbin/installkernel "$@"
+if [ -x /sbin/${INSTALLKERNEL} ]; then
+  exec /sbin/${INSTALLKERNEL} "$@"
 fi
 
 if [ "$2" = "zImage" ]; then

arch/m68k/install.sh

@@ -33,8 +33,8 @@ verify "$3"
 
 # User may have a custom install script
 
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install - same as make zlilo
 

arch/parisc/Makefile

@@ -118,8 +118,8 @@ define archhelp
 	@echo  '* vmlinux	- Uncompressed kernel image (./vmlinux)'
 	@echo  '  palo		- Bootable image (./lifimage)'
 	@echo  '  install	- Install kernel using'
-	@echo  '		  (your) ~/bin/installkernel or'
-	@echo  '		  (distribution) /sbin/installkernel or'
+	@echo  '		  (your) ~/bin/$(INSTALLKERNEL) or'
+	@echo  '		  (distribution) /sbin/$(INSTALLKERNEL) or'
 	@echo  '		  copy to $$(INSTALL_PATH)'
 endef
 

arch/parisc/install.sh

@@ -21,8 +21,8 @@
 
 # User may have a custom install script
 
-if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
-if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install
 

arch/powerpc/Makefile

@@ -182,8 +182,8 @@ define archhelp
   @echo '  simpleImage.<dt> - Firmware independent image.'
   @echo '  treeImage.<dt>  - Support for older IBM 4xx firmware (not U-Boot)'
   @echo '  install         - Install kernel using'
-  @echo '                    (your) ~/bin/installkernel or'
-  @echo '                    (distribution) /sbin/installkernel or'
+  @echo '                    (your) ~/bin/$(INSTALLKERNEL) or'
+  @echo '                    (distribution) /sbin/$(INSTALLKERNEL) or'
   @echo '                    install to $$(INSTALL_PATH) and run lilo'
   @echo '  *_defconfig     - Select default config from arch/$(ARCH)/configs'
   @echo ''

arch/powerpc/boot/install.sh

@@ -23,8 +23,8 @@ set -e
 
 # User may have a custom install script
 
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install
 

arch/s390/boot/install.sh

@@ -21,8 +21,8 @@
 
 # User may have a custom install script
 
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install - same as make zlilo
 

arch/sh/boot/compressed/install.sh

@@ -23,8 +23,8 @@
 
 # User may have a custom install script
 
-if [ -x /sbin/installkernel ]; then
-  exec /sbin/installkernel "$@"
+if [ -x /sbin/${INSTALLKERNEL} ]; then
+  exec /sbin/${INSTALLKERNEL} "$@"
 fi
 
 if [ "$2" = "zImage" ]; then

arch/x86/Makefile

@@ -179,8 +179,8 @@ archclean:
 define archhelp
   echo  '* bzImage      - Compressed kernel image (arch/x86/boot/bzImage)'
   echo  '  install      - Install kernel using'
-  echo  '                  (your) ~/bin/installkernel or'
-  echo  '                  (distribution) /sbin/installkernel or'
+  echo  '                  (your) ~/bin/$(INSTALLKERNEL) or'
+  echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
   echo  '  fdimage      - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
   echo  '  fdimage144   - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'

arch/x86/boot/install.sh

@@ -33,8 +33,8 @@ verify "$3"
 
 # User may have a custom install script
 
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install - same as make zlilo