Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
12 个月 前同步成功

通知 152
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 08 8月, 2017 1 次提交
    • D
      drm: Handle properties in the core for atomic drivers · 144a7999
      由 Daniel Vetter 提交于 
      The reason behind the original indirection through the helper
functions was to allow existing drivers to overwrite how they handle
properties. For example when a vendor-specific userspace had
expectations that didn't match atomic. That seemed likely, since
atomic is standardizing a _lot_ more of the behaviour of a kms driver.

But 20 drivers later there's no such need at all. Worse, this forces
all drivers to hook up the default behaviour, breaking userspace if
they forget to do that. And it forces us to export a bunch of core
function just for those helpers.

And finally, these helpers are the last places using
drm_atomic_legacy_backoff() and the implicit acquire_ctx.

This patch here just implements the new behaviour and updates the
docs. Follow-up patches will garbage-collect all the dead code.

v2: Fixup docs even better!

v3: Make it actually work ...

v4: Drop the uses_atomic_modeset() checks from the previous patch
again, since they're now moved up in the callchain.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org> (v3)
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725120204.2107-1-daniel.vetter@ffwll.ch
      144a7999
  3. 15 7月, 2017 3 次提交
    • S
      drm/edid: parse ycbcr 420 deep color information · e6a9a2c3
      由 Shashank Sharma 提交于 
      CEA-861-F spec adds ycbcr420 deep color support information
in hf-vsdb block. This patch extends the existing hf-vsdb parsing
function by adding parsing of ycbcr420 deep color support from the
EDID and adding it into display information stored.

V2: Rebase
V3: Rebase
V4: Moved definition of y420_dc_modes into this patch, where its used
    (Ville)
V5: Optimize function, if(conditions) not reqd (Ville)
V6: Rebase
V7: Rebase

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-8-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix sparse indentation warn]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
      e6a9a2c3
    • S
      drm/edid: parse YCBCR420 videomodes from EDID · 832d4f2f
      由 Shashank Sharma 提交于 
      HDMI 2.0 spec adds support for YCBCR420 sub-sampled output.
CEA-861-F adds two new blocks in EDID's CEA extension blocks,
to provide information about sink's YCBCR420 output capabilities.

These blocks are:

- YCBCR420vdb(YCBCR 420 video data block):
This block contains VICs of video modes, which can be sopported only
in YCBCR420 output mode (Not in RGB/YCBCR444/422. Its like a normal
SVD block, valid for YCBCR420 modes only.

- YCBCR420cmdb(YCBCR 420 capability map data block):
This block gives information about video modes which can support
YCBCR420 output mode also (along with RGB,YCBCR444/422 etc) This
block contains a bitmap index of normal svd videomodes, which can
support YCBCR420 output too.
So if bit 0 from first vcb byte is set, first video mode in the svd
list can support YCBCR420 output too. Bit 1 means second video mode
from svd list can support YCBCR420 output too, and so on.

This patch adds two bitmaps in display's hdmi_info structure, one each
for VCB and VDB modes. If the source is HDMI 2.0 capable, this patch
adds:
- VDB modes (YCBCR 420 only modes) in connector's mode list, also makes
  an entry in the vdb_bitmap per vic.
- VCB modes (YCBCR 420 also modes) only entry in the vcb_bitmap.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>

V2: Addressed
    Review comments from Emil:
    - Use 1ULL<<i instead of 1<<i to make sure the output is 64bit.
    - Use the suggested method for updating dbmap.
    - Add documentation for YCBCR420_vcb_map to fix kbuild warning.

    Review comments from Ville:
    - Do not expose the YCBCR420 flags in uabi layer, keep it internal.
    - Save a map of YCBCR420 modes for future reference.
    - Check db length before trying to parse extended tag.
    - Add a warning if there are > 64 modes in capability map block.
    - Use y420cmdb in function names and macros while dealing with vcb
      to be aligned with spec.
    - Move the display information parsing block ahead of mode parsing
      blocks.

V3: Addressed design/review comments from Ville
    - Do not add flags in video modes, else we have to expose them to user
    - There should not be a UABI change, and kernel should detect the
      choice of the output based on type of mode, and the bitmaps.
    - Use standard bitops from kernel bitmap header, instead of calculating
      bit positions manually.

V4: Addressed review comments from Ville:
    - s/ycbcr_420_vdb/y420vdb
    - s/ycbcr_420_vcb/y420cmdb
    - Be less verbose on description of do_y420vdb_modes
    - Move newmode variable in the loop scope.
    - Use svd_to_vic() to get a VIC, instead of 0x7f
    - Remove bitmap description for CMDB modes & VDB modes
    - Dont add connector->ycbcr_420_allowed check for cmdb modes
    - Remove 'len' variable, in is_y420cmdb function, which is used
      only once
    - Add length check in is_y420vdb function
    - Remove unnecessary if (!db) check in function parse_y420cmdb_bitmap
    - Do not add print about YCBCR 420 modes
    - Fix indentation in few places
    - Move ycbcr420_dc_modes in next patch, where its used
    - Add a separate patch for movement of drm_add_display_info()

V5: Addressed review comments from Ville:
    - Add the patch which cleans up the current EXTENDED_TAG usage
    - Make y420_cmdb_map u64
    - Do not block ycbcr420 modes while parsing the EDID, rather
      add a separate helper function to prune ycbcr420-only modes from
      connector's probed modes.

V6: Rebase
V7: Move this patch after the 420_only validation patch (Ville)
V8: Addressed review comments from Ville
    - use cea_vic_valid check before adding cmdb/vdb modes
    - add check for i < 64 while adding cmdb modes
    - use 1ULL while checking bitmap
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1500028426-14883-1-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix checkpatch complaints and indentation]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
      832d4f2f
    • S
      drm: add helper to validate YCBCR420 modes · d8523153
      由 Shashank Sharma 提交于 
      YCBCR420 modes are supported only on HDMI 2.0 capable sources.
This patch adds:
- A drm helper to validate YCBCR420-only mode on a particular
  connector. This function will help pruning the YCBCR420-only
  modes from the connector's modelist.
- A bool variable (ycbcr_420_allowed) in the drm connector structure.
  While handling the EDID from HDMI 2.0 sinks, its important to know
  if the source is capable of handling YCBCR420 output, so that no
  YCBCR 420 modes will be listed for sources which can't handle it.
  A driver should set this variable if it wants to see YCBCR420 modes
  in the modedb.

V5: Introduced the patch in series.
V6: Squashed two patches (validate YCBCR420 and add YCBCR420
	   identifier)
V7: Addressed review comments from Vile:
    - Move this patch before we add 420 modes from EDID.
    - No need for drm_valid_cea_vic() check, function back to non-static.
    - Update MODE_STATUS with NO_420 condition.
    - Introduce y420_vdb_modes variable in this patch

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-6-git-send-email-shashank.sharma@intel.com
[vsyrjala: Drop the now bogus EXPORT_SYMBOL(drm_valid_cea_vic)]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
      d8523153
  5. 15 6月, 2017 1 次提交
  7. 26 5月, 2017 1 次提交
  9. 18 5月, 2017 1 次提交
  11. 08 5月, 2017 2 次提交
  13. 07 4月, 2017 1 次提交
  15. 04 4月, 2017 1 次提交
  17. 29 3月, 2017 1 次提交
  19. 28 3月, 2017 1 次提交
  21. 21 3月, 2017 2 次提交
    • S
      drm/edid: detect SCDC support in HF-VSDB · 62c58af3
      由 Shashank Sharma 提交于 
      This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
  This structure will be used to save and indicate if sink
  supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
  reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
  in scdc structure
- If SCDC is present, checks if sink is capable of generating
  SCDC read request, and marks it in scdc structure.

V2: Addressed review comments
  Thierry:
  - Fix typos in commit message and make abbreviation consistent
    across the commit message.
  - Change structure object name from hdmi_info -> hdmi
  - Fix typos and abbreviations in description of structure drm_hdmi_info
    end the description with a full stop.
  - Create a structure drm_scdc, and keep all information related to SCDC
    register set (supported, read request supported) etc in it.

  Ville:
  - Change rr -> read_request
  - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
    of HF-VSDB parsing can be kept in same function, in incremental
    patches.

V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Addressed review comments from Ville
  - Add clock rate calculations for 1/10 and 1/40 ratios
  - Remove leftovers from old patchset
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
      62c58af3
    • S
      drm/edid: detect SCDC support in HF-VSDB · afa1c763
      由 Shashank Sharma 提交于 
      This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
  This structure will be used to save and indicate if sink
  supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
  reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
  in scdc structure
- If SCDC is present, checks if sink is capable of generating
  SCDC read request, and marks it in scdc structure.

V2: Addressed review comments
 Thierry:
 - Fix typos in commit message and make abbreviation consistent
   across the commit message.
 - Change structure object name from hdmi_info -> hdmi
 - Fix typos and abbreviations in description of structure drm_hdmi_info
   end the description with a full stop.
 - Create a structure drm_scdc, and keep all information related to SCDC
   register set (supported, read request supported) etc in it.

Ville:
 - Change rr -> read_request
 - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
   of HF-VSDB parsing can be kept in same function, in incremental
   patches.

V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Rebase.
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-4-git-send-email-shashank.sharma@intel.com
      afa1c763
  23. 01 3月, 2017 1 次提交
  25. 28 2月, 2017 2 次提交
  27. 27 2月, 2017 1 次提交
    • M
      drm: Add a new connector atomic property for link status · 40ee6fbe
      由 Manasi Navare 提交于 
      At the time userspace does setcrtc, we've already promised the mode
would work. The promise is based on the theoretical capabilities of
the link, but it's possible we can't reach this in practice. The DP
spec describes how the link should be reduced, but we can't reduce
the link below the requirements of the mode. Black screen follows.

One idea would be to have setcrtc return a failure. However, it
already should not fail as the atomic checks have passed. It would
also conflict with the idea of making setcrtc asynchronous in the
future, returning before the actual mode setting and link training.

Another idea is to train the link "upfront" at hotplug time, before
pruning the mode list, so that we can do the pruning based on
practical not theoretical capabilities. However, the changes for link
training are pretty drastic, all for the sake of error handling and
DP compliance, when the most common happy day scenario is the current
approach of link training at mode setting time, using the optimal
parameters for the mode. It is also not certain all hardware could do
this without the pipe on; not even all our hardware can do this. Some
of this can be solved, but not trivially.

Both of the above ideas also fail to address link degradation *during*
operation.

The solution is to add a new "link-status" connector property in order
to address link training failure in a way that:
a) changes the current happy day scenario as little as possible, to
avoid regressions, b) can be implemented the same way by all drm
drivers, c) is still opt-in for the drivers and userspace, and opting
out doesn't regress the user experience, d) doesn't prevent drivers
from implementing better or alternate approaches, possibly without
userspace involvement. And, of course, handles all the issues presented.
In the usual happy day scenario, this is always "good". If something
fails during or after a mode set, the kernel driver can set the link
status to "bad" and issue a hotplug uevent for userspace to have it
re-check the valid modes through GET_CONNECTOR IOCTL, and try modeset
again. If the theoretical capabilities of the link can't be reached,
the mode list is trimmed based on that.

v7 by Jani:
* Rebase, simplify set property while at it, checkpatch fix
v6:
* Fix a typo in kernel doc (Sean Paul)
v5:
* Clarify doc for silent rejection of atomic properties by driver (Daniel Vetter)
v4:
* Add comments in kernel-doc format (Daniel Vetter)
* Update the kernel-doc for link-status (Sean Paul)
v3:
* Fixed a build error (Jani Saarinen)
v2:
* Removed connector->link_status (Daniel Vetter)
* Set connector->state->link_status in drm_mode_connector_set_link_status_property
(Daniel Vetter)
* Set the connector_changed flag to true if connector->state->link_status changed.
* Reset link_status to GOOD in update_output_state (Daniel Vetter)
* Never allow userspace to set link status from Good To Bad (Daniel Vetter)
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NTony Cheng <tony.cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net> (for the -modesetting patch)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/0182487051aa9f1594820e35a4853de2f8747b4e.1481883920.git.jani.nikula@intel.com
      40ee6fbe
  29. 30 1月, 2017 1 次提交
  31. 25 1月, 2017 1 次提交
  33. 30 12月, 2016 2 次提交
  35. 18 12月, 2016 4 次提交
    • P
      drm: Fix spelling of clock in drm_connector.h · 188f7882
      由 Peter Meerwald-Stadler 提交于 
      Signed-off-by: NPeter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: trivial@kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481894663-4570-1-git-send-email-pmeerw@pmeerw.net
      188f7882
    • D
      drm: Tighten locking in drm_mode_getconnector · 91eefc05
      由 Daniel Vetter 提交于 
      - Modeset state needs mode_config->connection mutex, that covers
  figuring out the encoder, and reading properties (since in the
  atomic case those need to look at connector->state).

- Don't hold any locks for stuff that's invariant (i.e. possible
  connectors).

- Same for connector lookup and unref, those don't need any locks.

- And finally the probe stuff is only protected by mode_config->mutex.

While at it updated the kerneldoc for these fields in drm_connector
and add docs explaining what's protected by which locks.
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-10-daniel.vetter@ffwll.ch
      91eefc05
    • D
      drm: prevent double-(un)registration for connectors · e73ab00e
      由 Daniel Vetter 提交于 
      If we're unlucky then the registration from a hotplugged connector
might race with the final registration step on driver load. And since
MST topology discover is asynchronous that's even somewhat likely.

v2: Also update the kerneldoc for @registered!

v3: Review from Chris:
- Improve kerneldoc for late_register/early_unregister callbacks.
- Use mutex_destroy.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218133545.2106-1-daniel.vetter@ffwll.ch
      e73ab00e
    • D
      drm: locking&new iterators for connector_list · 613051da
      由 Daniel Vetter 提交于 
      The requirements for connector_list locking are a bit tricky:
- We need to be able to jump over zombie conectors (i.e. with refcount
  == 0, but not yet removed from the list). If instead we require that
  there's no zombies on the list then the final kref_put must happen
  under the list protection lock, which means that locking context
  leaks all over the place. Not pretty - better to deal with zombies
  and wrap the locking just around the list_del in the destructor.

- When we walk the list we must _not_ hold the connector list lock. We
  walk the connector list at an absolutely massive amounts of places,
  if all those places can't ever call drm_connector_unreference the
  code would get unecessarily complicated.

- connector_list needs it own lock, again too many places that walk it
  that we could reuse e.g. mode_config.mutex without resulting in
  inversions.

- Lots of code uses these loops to look-up a connector, i.e. they want
  to be able to call drm_connector_reference. But on the other hand we
  want connectors to stay on that list until they're dead (i.e.
  connector_list can't hold a full reference), which means despite the
  "can't hold lock for the loop body" rule we need to make sure a
  connector doesn't suddenly become a zombie.

At first Dave&I discussed various horror-show approaches using srcu,
but turns out it's fairly easy:

- For the loop body we always hold an additional reference to the
  current connector. That means it can't zombify, and it also means
  it'll stay on the list, which means we can use it as our iterator to
  find the next connector.

- When we try to find the next connector we only have to jump over
  zombies. To make sure we don't chase bad pointers that entire loop
  is protected with the new connect_list_lock spinlock. And because we
  know that we're starting out with a non-zombie (need to drop our
  reference for the old connector only after we have our new one),
  we're guranteed to still be on the connector_list and either find
  the next non-zombie or complete the iteration.

- Only downside is that we need to make sure that the temporary
  reference for the loop body doesn't leak. iter_get/put() functions +
  lockdep make sure that's the case.

- To avoid a flag day the new iterator macro has an _iter postfix. We
  can rename it back once all the users of the unsafe version are gone
  (there's about 100 list walkers for the connector_list).

For now this patch only converts all the list walking in the core,
leaving helpers and drivers for later patches. The nice thing is that
we can now finally remove 2 FIXME comments from the
register/unregister functions.

v2:
- use irqsafe spinlocks, so that we can use this in drm_state_dump
  too.
- nuke drm_modeset_lock_all from drm_connector_init, now entirely
  cargo-culted nonsense.

v3:
- do {} while (!kref_get_unless_zero), makes for a tidier loop (Dave).
- pretty kerneldoc
- add EXPORT_SYMBOL, helpers&drivers are supposed to use this.

v4: Change lockdep annotations to only check whether we release the
iter fake lock again (i.e. make sure that iter_put is called), but
not check any locking dependecies itself. That seams to require a
recursive read lock in trylock mode.

Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-6-daniel.vetter@ffwll.ch
      613051da
  37. 10 12月, 2016 1 次提交
  39. 01 12月, 2016 1 次提交
  41. 15 11月, 2016 1 次提交
  43. 09 11月, 2016 1 次提交
  45. 10 10月, 2016 1 次提交
  47. 04 10月, 2016 2 次提交
  49. 19 9月, 2016 2 次提交
  51. 29 8月, 2016 1 次提交
  53. 17 8月, 2016 3 次提交