drm: Extract drm_bridge.h

We don't want to burry the bridge structures kerneldoc in drm_crtc.h.

Cc: Archit Taneja <archit.taneja@gmail.com>
Reviewed-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160831160913.12991-3-daniel.vetter@ffwll.ch

Documentation/gpu/drm-kms-helpers.rst

@@ -126,6 +126,13 @@ Default bridge callback sequence
 .. kernel-doc:: drivers/gpu/drm/drm_bridge.c
    :doc: bridge callbacks
 
+
+Bridge Helper Reference
+-------------------------
+
+.. kernel-doc:: include/drm/drm_bridge.h
+   :internal:
+
 .. kernel-doc:: drivers/gpu/drm/drm_bridge.c
    :export:
 

drivers/gpu/drm/drm_bridge.c

@@ -23,10 +23,9 @@
 
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 
-#include <drm/drm_crtc.h>
-
-#include "drm/drmP.h"
+#include <drm/drm_bridge.h>
 
 /**
  * DOC: overview

include/drm/drm_bridge.h

+/*
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef __DRM_BRIDGE_H__
+#define __DRM_BRIDGE_H__
+
+#include <linux/list.h>
+#include <linux/ctype.h>
+#include <drm/drm_mode_object.h>
+#include <drm/drm_modes.h>
+
+struct drm_bridge;
+
+/**
+ * struct drm_bridge_funcs - drm_bridge control functions
+ */
+struct drm_bridge_funcs {
+	/**
+	 * @attach:
+	 *
+	 * This callback is invoked whenever our bridge is being attached to a
+	 * &drm_encoder.
+	 *
+	 * The attach callback is optional.
+	 *
+	 * RETURNS:
+	 *
+	 * Zero on success, error code on failure.
+	 */
+	int (*attach)(struct drm_bridge *bridge);
+
+	/**
+	 * @detach:
+	 *
+	 * This callback is invoked whenever our bridge is being detached from a
+	 * &drm_encoder.
+	 *
+	 * The detach callback is optional.
+	 */
+	void (*detach)(struct drm_bridge *bridge);
+
+	/**
+	 * @mode_fixup:
+	 *
+	 * This callback is used to validate and adjust a mode. The paramater
+	 * mode is the display mode that should be fed to the next element in
+	 * the display chain, either the final &drm_connector or the next
+	 * &drm_bridge. The parameter adjusted_mode is the input mode the bridge
+	 * requires. It can be modified by this callback and does not need to
+	 * match mode.
+	 *
+	 * This is the only hook that allows a bridge to reject a modeset. If
+	 * this function passes all other callbacks must succeed for this
+	 * configuration.
+	 *
+	 * The mode_fixup callback is optional.
+	 *
+	 * NOTE:
+	 *
+	 * This function is called in the check phase of atomic modesets, which
+	 * can be aborted for any reason (including on userspace's request to
+	 * just check whether a configuration would be possible). Drivers MUST
+	 * NOT touch any persistent state (hardware or software) or data
+	 * structures except the passed in @state parameter.
+	 *
+	 * RETURNS:
+	 *
+	 * True if an acceptable configuration is possible, false if the modeset
+	 * operation should be rejected.
+	 */
+	bool (*mode_fixup)(struct drm_bridge *bridge,
+			   const struct drm_display_mode *mode,
+			   struct drm_display_mode *adjusted_mode);
+	/**
+	 * @disable:
+	 *
+	 * This callback should disable the bridge. It is called right before
+	 * the preceding element in the display pipe is disabled. If the
+	 * preceding element is a bridge this means it's called before that
+	 * bridge's ->disable() function. If the preceding element is a
+	 * &drm_encoder it's called right before the encoder's ->disable(),
+	 * ->prepare() or ->dpms() hook from struct &drm_encoder_helper_funcs.
+	 *
+	 * The bridge can assume that the display pipe (i.e. clocks and timing
+	 * signals) feeding it is still running when this callback is called.
+	 *
+	 * The disable callback is optional.
+	 */
+	void (*disable)(struct drm_bridge *bridge);
+
+	/**
+	 * @post_disable:
+	 *
+	 * This callback should disable the bridge. It is called right after
+	 * the preceding element in the display pipe is disabled. If the
+	 * preceding element is a bridge this means it's called after that
+	 * bridge's ->post_disable() function. If the preceding element is a
+	 * &drm_encoder it's called right after the encoder's ->disable(),
+	 * ->prepare() or ->dpms() hook from struct &drm_encoder_helper_funcs.
+	 *
+	 * The bridge must assume that the display pipe (i.e. clocks and timing
+	 * singals) feeding it is no longer running when this callback is
+	 * called.
+	 *
+	 * The post_disable callback is optional.
+	 */
+	void (*post_disable)(struct drm_bridge *bridge);
+
+	/**
+	 * @mode_set:
+	 *
+	 * This callback should set the given mode on the bridge. It is called
+	 * after the ->mode_set() callback for the preceding element in the
+	 * display pipeline has been called already. The display pipe (i.e.
+	 * clocks and timing signals) is off when this function is called.
+	 */
+	void (*mode_set)(struct drm_bridge *bridge,
+			 struct drm_display_mode *mode,
+			 struct drm_display_mode *adjusted_mode);
+	/**
+	 * @pre_enable:
+	 *
+	 * This callback should enable the bridge. It is called right before
+	 * the preceding element in the display pipe is enabled. If the
+	 * preceding element is a bridge this means it's called before that
+	 * bridge's ->pre_enable() function. If the preceding element is a
+	 * &drm_encoder it's called right before the encoder's ->enable(),
+	 * ->commit() or ->dpms() hook from struct &drm_encoder_helper_funcs.
+	 *
+	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
+	 * will not yet be running when this callback is called. The bridge must
+	 * not enable the display link feeding the next bridge in the chain (if
+	 * there is one) when this callback is called.
+	 *
+	 * The pre_enable callback is optional.
+	 */
+	void (*pre_enable)(struct drm_bridge *bridge);
+
+	/**
+	 * @enable:
+	 *
+	 * This callback should enable the bridge. It is called right after
+	 * the preceding element in the display pipe is enabled. If the
+	 * preceding element is a bridge this means it's called after that
+	 * bridge's ->enable() function. If the preceding element is a
+	 * &drm_encoder it's called right after the encoder's ->enable(),
+	 * ->commit() or ->dpms() hook from struct &drm_encoder_helper_funcs.
+	 *
+	 * The bridge can assume that the display pipe (i.e. clocks and timing
+	 * signals) feeding it is running when this callback is called. This
+	 * callback must enable the display link feeding the next bridge in the
+	 * chain if there is one.
+	 *
+	 * The enable callback is optional.
+	 */
+	void (*enable)(struct drm_bridge *bridge);
+};
+
+/**
+ * struct drm_bridge - central DRM bridge control structure
+ * @dev: DRM device this bridge belongs to
+ * @encoder: encoder to which this bridge is connected
+ * @next: the next bridge in the encoder chain
+ * @of_node: device node pointer to the bridge
+ * @list: to keep track of all added bridges
+ * @funcs: control functions
+ * @driver_private: pointer to the bridge driver's internal context
+ */
+struct drm_bridge {
+	struct drm_device *dev;
+	struct drm_encoder *encoder;
+	struct drm_bridge *next;
+#ifdef CONFIG_OF
+	struct device_node *of_node;
+#endif
+	struct list_head list;
+
+	const struct drm_bridge_funcs *funcs;
+	void *driver_private;
+};
+
+int drm_bridge_add(struct drm_bridge *bridge);
+void drm_bridge_remove(struct drm_bridge *bridge);
+struct drm_bridge *of_drm_find_bridge(struct device_node *np);
+int drm_bridge_attach(struct drm_device *dev, struct drm_bridge *bridge);
+void drm_bridge_detach(struct drm_bridge *bridge);
+
+bool drm_bridge_mode_fixup(struct drm_bridge *bridge,
+			const struct drm_display_mode *mode,
+			struct drm_display_mode *adjusted_mode);
+void drm_bridge_disable(struct drm_bridge *bridge);
+void drm_bridge_post_disable(struct drm_bridge *bridge);
+void drm_bridge_mode_set(struct drm_bridge *bridge,
+			struct drm_display_mode *mode,
+			struct drm_display_mode *adjusted_mode);
+void drm_bridge_pre_enable(struct drm_bridge *bridge);
+void drm_bridge_enable(struct drm_bridge *bridge);
+
+#endif

include/drm/drm_connector.h

@@ -27,6 +27,10 @@
 #include <linux/ctype.h>
 #include <drm/drm_mode_object.h>
 
+#include <uapi/drm/drm_mode.h>
+
+struct drm_device;
+
 struct drm_connector_helper_funcs;
 struct drm_device;
 struct drm_crtc;

include/drm/drm_crtc.h

@@ -42,6 +42,7 @@
 #include <drm/drm_connector.h>
 #include <drm/drm_encoder.h>
 #include <drm/drm_property.h>
+#include <drm/drm_bridge.h>
 
 struct drm_device;
 struct drm_mode_set;
@@ -1018,174 +1019,6 @@ struct drm_plane {
 	struct drm_property *zpos_property;
 };
 
-/**
- * struct drm_bridge_funcs - drm_bridge control functions
- */
-struct drm_bridge_funcs {
-	/**
-	 * @attach:
-	 *
-	 * This callback is invoked whenever our bridge is being attached to a
-	 * &drm_encoder.
-	 *
-	 * The attach callback is optional.
-	 *
-	 * RETURNS:
-	 *
-	 * Zero on success, error code on failure.
-	 */
-	int (*attach)(struct drm_bridge *bridge);
-
-	/**
-	 * @detach:
-	 *
-	 * This callback is invoked whenever our bridge is being detached from a
-	 * &drm_encoder.
-	 *
-	 * The detach callback is optional.
-	 */
-	void (*detach)(struct drm_bridge *bridge);
-
-	/**
-	 * @mode_fixup:
-	 *
-	 * This callback is used to validate and adjust a mode. The paramater
-	 * mode is the display mode that should be fed to the next element in
-	 * the display chain, either the final &drm_connector or the next
-	 * &drm_bridge. The parameter adjusted_mode is the input mode the bridge
-	 * requires. It can be modified by this callback and does not need to
-	 * match mode.
-	 *
-	 * This is the only hook that allows a bridge to reject a modeset. If
-	 * this function passes all other callbacks must succeed for this
-	 * configuration.
-	 *
-	 * The mode_fixup callback is optional.
-	 *
-	 * NOTE:
-	 *
-	 * This function is called in the check phase of atomic modesets, which
-	 * can be aborted for any reason (including on userspace's request to
-	 * just check whether a configuration would be possible). Drivers MUST
-	 * NOT touch any persistent state (hardware or software) or data
-	 * structures except the passed in @state parameter.
-	 *
-	 * RETURNS:
-	 *
-	 * True if an acceptable configuration is possible, false if the modeset
-	 * operation should be rejected.
-	 */
-	bool (*mode_fixup)(struct drm_bridge *bridge,
-			   const struct drm_display_mode *mode,
-			   struct drm_display_mode *adjusted_mode);
-	/**
-	 * @disable:
-	 *
-	 * This callback should disable the bridge. It is called right before
-	 * the preceding element in the display pipe is disabled. If the
-	 * preceding element is a bridge this means it's called before that
-	 * bridge's ->disable() function. If the preceding element is a
-	 * &drm_encoder it's called right before the encoder's ->disable(),
-	 * ->prepare() or ->dpms() hook from struct &drm_encoder_helper_funcs.
-	 *
-	 * The bridge can assume that the display pipe (i.e. clocks and timing
-	 * signals) feeding it is still running when this callback is called.
-	 *
-	 * The disable callback is optional.
-	 */
-	void (*disable)(struct drm_bridge *bridge);
-
-	/**
-	 * @post_disable:
-	 *
-	 * This callback should disable the bridge. It is called right after
-	 * the preceding element in the display pipe is disabled. If the
-	 * preceding element is a bridge this means it's called after that
-	 * bridge's ->post_disable() function. If the preceding element is a
-	 * &drm_encoder it's called right after the encoder's ->disable(),
-	 * ->prepare() or ->dpms() hook from struct &drm_encoder_helper_funcs.
-	 *
-	 * The bridge must assume that the display pipe (i.e. clocks and timing
-	 * singals) feeding it is no longer running when this callback is
-	 * called.
-	 *
-	 * The post_disable callback is optional.
-	 */
-	void (*post_disable)(struct drm_bridge *bridge);
-
-	/**
-	 * @mode_set:
-	 *
-	 * This callback should set the given mode on the bridge. It is called
-	 * after the ->mode_set() callback for the preceding element in the
-	 * display pipeline has been called already. The display pipe (i.e.
-	 * clocks and timing signals) is off when this function is called.
-	 */
-	void (*mode_set)(struct drm_bridge *bridge,
-			 struct drm_display_mode *mode,
-			 struct drm_display_mode *adjusted_mode);
-	/**
-	 * @pre_enable:
-	 *
-	 * This callback should enable the bridge. It is called right before
-	 * the preceding element in the display pipe is enabled. If the
-	 * preceding element is a bridge this means it's called before that
-	 * bridge's ->pre_enable() function. If the preceding element is a
-	 * &drm_encoder it's called right before the encoder's ->enable(),
-	 * ->commit() or ->dpms() hook from struct &drm_encoder_helper_funcs.
-	 *
-	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
-	 * will not yet be running when this callback is called. The bridge must
-	 * not enable the display link feeding the next bridge in the chain (if
-	 * there is one) when this callback is called.
-	 *
-	 * The pre_enable callback is optional.
-	 */
-	void (*pre_enable)(struct drm_bridge *bridge);
-
-	/**
-	 * @enable:
-	 *
-	 * This callback should enable the bridge. It is called right after
-	 * the preceding element in the display pipe is enabled. If the
-	 * preceding element is a bridge this means it's called after that
-	 * bridge's ->enable() function. If the preceding element is a
-	 * &drm_encoder it's called right after the encoder's ->enable(),
-	 * ->commit() or ->dpms() hook from struct &drm_encoder_helper_funcs.
-	 *
-	 * The bridge can assume that the display pipe (i.e. clocks and timing
-	 * signals) feeding it is running when this callback is called. This
-	 * callback must enable the display link feeding the next bridge in the
-	 * chain if there is one.
-	 *
-	 * The enable callback is optional.
-	 */
-	void (*enable)(struct drm_bridge *bridge);
-};
-
-/**
- * struct drm_bridge - central DRM bridge control structure
- * @dev: DRM device this bridge belongs to
- * @encoder: encoder to which this bridge is connected
- * @next: the next bridge in the encoder chain
- * @of_node: device node pointer to the bridge
- * @list: to keep track of all added bridges
- * @funcs: control functions
- * @driver_private: pointer to the bridge driver's internal context
- */
-struct drm_bridge {
-	struct drm_device *dev;
-	struct drm_encoder *encoder;
-	struct drm_bridge *next;
-#ifdef CONFIG_OF
-	struct device_node *of_node;
-#endif
-	struct list_head list;
-
-	const struct drm_bridge_funcs *funcs;
-	void *driver_private;
-};
-
 /**
  * struct drm_crtc_commit - track modeset commits on a CRTC
  *
@@ -2200,22 +2033,4 @@ struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
 					   int hsize, int vsize, int fresh,
 					   bool rb);
 
-/* drm_bridge.c */
-extern int drm_bridge_add(struct drm_bridge *bridge);
-extern void drm_bridge_remove(struct drm_bridge *bridge);
-extern struct drm_bridge *of_drm_find_bridge(struct device_node *np);
-extern int drm_bridge_attach(struct drm_device *dev, struct drm_bridge *bridge);
-extern void drm_bridge_detach(struct drm_bridge *bridge);
-
-bool drm_bridge_mode_fixup(struct drm_bridge *bridge,
-			const struct drm_display_mode *mode,
-			struct drm_display_mode *adjusted_mode);
-void drm_bridge_disable(struct drm_bridge *bridge);
-void drm_bridge_post_disable(struct drm_bridge *bridge);
-void drm_bridge_mode_set(struct drm_bridge *bridge,
-			struct drm_display_mode *mode,
-			struct drm_display_mode *adjusted_mode);
-void drm_bridge_pre_enable(struct drm_bridge *bridge);
-void drm_bridge_enable(struct drm_bridge *bridge);
-
 #endif /* __DRM_CRTC_H__ */

include/drm/drm_mode_object.h

@@ -26,6 +26,7 @@
 #include <linux/kref.h>
 struct drm_object_properties;
 struct drm_property;
+struct drm_device;
 
 /**
  * struct drm_mode_object - base structure for modeset objects

include/drm/drm_modes.h

@@ -27,9 +27,13 @@
 #ifndef __DRM_MODES_H__
 #define __DRM_MODES_H__
 
+#include <linux/hdmi.h>
+
 #include <drm/drm_mode_object.h>
 #include <drm/drm_connector.h>
 
+struct videomode;
+
 /*
  * Note on terminology:  here, for brevity and convenience, we refer to connector
  * control chips as 'CRTCs'.  They can control any type of connector, VGA, LVDS,