mm: Pass virtual address to [__]p{te,ud,md}_free_tlb()

Upcoming paches to support the new 64-bit "BookE" powerpc architecture
will need to have the virtual address corresponding to PTE page when
freeing it, due to the way the HW table walker works.

Basically, the TLB can be loaded with "large" pages that cover the whole
virtual space (well, sort-of, half of it actually) represented by a PTE
page, and which contain an "indirect" bit indicating that this TLB entry
RPN points to an array of PTEs from which the TLB can then create direct
entries. Thus, in order to invalidate those when PTE pages are deleted,
we need the virtual address to pass to tlbilx or tlbivax instructions.

The old trick of sticking it somewhere in the PTE page struct page sucks
too much, the address is almost readily available in all call sites and
almost everybody implemets these as macros, so we may as well add the
argument everywhere. I added it to the pmd and pud variants for consistency.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Howells <dhowells@redhat.com> [MN10300 & FRV]
Acked-by: NNick Piggin <npiggin@suse.de>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The combination of noexec=on and a clock_gettime call with clock id
CLOCK_THREAD_CPUTIME_ID is broken. The vdso code switches to the
access register mode to get access to the per-cpu data structure to
execute the magic ectg instruction. After the ectg instruction the
code always switches back to the primary mode but for noexec=on the
correct mode is the secondary mode. The effect of the bug is that the
user space program looses the access to all mappings without PROT_EXEC,
e.g. the stack. The problem is fixed by restoring the mode that has
been active before the switch to the access register mode.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

vdso per cpu area allocation in smp_prepare_cpus() happens with GFP_KERNEL
but irqs disabled. Triggers this one:

Badness at kernel/lockdep.c:2280
Modules linked in:
CPU: 0 Not tainted 2.6.30 #2
Process swapper (pid: 1, task: 000000003fe88000, ksp: 000000003fe87eb8)
Krnl PSW : 0400c00180000000 0000000000083360 (lockdep_trace_alloc+0xec/0xf8)
[...]
Call Trace:
([<00000000000832b6>] lockdep_trace_alloc+0x42/0xf8)
 [<00000000000b1880>] __alloc_pages_internal+0x3e8/0x5c4
 [<00000000000b1b4a>] __get_free_pages+0x3a/0xb0
 [<0000000000026546>] vdso_alloc_per_cpu+0x6a/0x18c
 [<00000000005eff82>] smp_prepare_cpus+0x322/0x594
 [<00000000005e8232>] kernel_init+0x76/0x398
 [<000000000001bb1e>] kernel_thread_starter+0x6/0xc
 [<000000000001bb18>] kernel_thread_starter+0x0/0xc

Fix this by moving the allocation out of the irqs disabled section.
Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

swsusp_arch_suspend() actually saves all cpu register contents on
hibernation.
Machine checks must be disabled since swsusp_arch_suspend() stores
register contents to their lowcore save areas. That's the same
place where register contents on machine checks would be saved.
To avoid register corruption disable machine checks.
We must also disable machine checks in the new psw mask for
program checks, since swsusp_arch_suspend() may generate program
checks.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Our swsusp_arch_suspend() backend implementation disables prefixing
by setting the contents of the prefix register to 0.
However afterwards common code functions are called which might
access percpu data structures.
Since the lowcore contains e.g. the percpu base pointer this isn't
a good idea. So fix this by copying the hibernating cpu's lowcore to
absolute address zero.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull the initial preempt_count value into a single
definition site.

Maintainers for: alpha, ia64 and m68k, please have a look,
your arch code is funny.

The header magic is a bit odd, but similar to the KERNEL_DS
one, CPP waits with expanding these macros until the
INIT_THREAD_INFO macro itself is expanded, which is in
arch/*/kernel/init_task.c where we've already included
sched.h so we're good.

Cc: tony.luck@intel.com
Cc: rth@twiddle.net
Cc: geert@linux-m68k.org
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

32-bit s390 has efficient support for 64/32-bit conversions, define
KTIME_SCALAR to enable the use of the plain scalar nanosecond based
representation of ktime.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Performance counters need 64 bit atomic operations.
To keep the patch small we use the simple generic atomic64_t implementation.
The native implementation follows with the next kernel.

Fixes this build bug:

In file included from kernel/sched.c:42:
include/linux/perf_counter.h:427: error: expected specifier-qualifier-list before 'atomic64_t'
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The frame pointer is useless for s390 in the sched.c code.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Provide __ucmpdi2() helper function on 31 bit so we don't run
again and again in compile errors like this one:

kernel/built-in.o: In function `T.689':
perf_counter.c:(.text+0x56c86): undefined reference to `__ucmpdi2'
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add PERF_COUNTER_INDEX_OFFSET define to fix this build bug:

kernel/perf_counter.c: In function 'perf_counter_index':
kernel/perf_counter.c:1889: error: 'PERF_COUNTER_INDEX_OFFSET' undeclared

Same fix as for FRV since s390 doesn't support hw counters.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We always returned -EINVAL when setting of a shutdown action failed. This was
misleading, if for example the hardware did not support the shutdown action.
Now we save each shutdown action's init return code and return it when the
action is being set.
Signed-off-by: NFrank Munzert <munzert@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Our udelay implementation enables interrupts to receive a special timer
interrupt regardless of the context it is called from.
This might lead to false positive lockdep reports. Since lockdep isn't
aware of the fact that only a single interrupt source is enabled it
warns about possible deadlocks that in reality won't happen, like
the one below.
To fix this disable lockdep before enabling interrupts.

[ 254.040888] =================================
[ 254.040904] [ INFO: inconsistent lock state ]
[ 254.040910] 2.6.30 #9
[ 254.040914] ---------------------------------
[ 254.040920] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[ 254.040927] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[ 254.040934] (sch->lock){?.-...}, at: [<00000000002e4778>] ccw_device_timeout+0x48/0x2f0
[ 254.040961] {IN-HARDIRQ-W} state was registered at:
[ 254.040969] [<0000000000096f74>] __lock_acquire+0x9d4/0x188c
[ 254.040985] [<0000000000097f68>] lock_acquire+0x13c/0x16c
[ 254.040998] [<00000000004527e0>] _spin_lock+0x74/0xb8
[ 254.041016] [<0000000000457eb2>] do_IRQ+0xde/0x208
[ 254.041031] [<000000000002d190>] io_return+0x0/0x8
[ 254.041049] [<0000000000029faa>] vtime_stop_cpu+0xbe/0x114
[ 254.041066] irq event stamp: 259629
[ 254.041076] hardirqs last enabled at (259628): [<000000000045238e>] _spin_unlock_irq+0x5e/0x9c
[ 254.041095] hardirqs last disabled at (259629): [<000000000045292e>] _spin_lock_irq+0x4a/0xc4
[ 254.041126] softirqs last enabled at (259614): [<000000000006500e>] __do_softirq+0x296/0x2b0
[ 254.041137] softirqs last disabled at (259619): [<0000000000024cf6>] do_softirq+0x102/0x108
[ 254.041147]
[ 254.041148] other info that might help us debug this:
[ 254.041153] 2 locks held by swapper/0:
[ 254.041157] #0: (&priv->timer){+.-...}, at: [<000000000006bf9a>] run_timer_softirq+0x19a/0x340
[ 254.041170] #1: (sch->lock){?.-...}, at: [<00000000002e4778>] ccw_device_timeout+0x48/0x2f0
[ 254.041182]
[ 254.041310] Call Trace:
[ 254.041313] ([<00000000000174fc>] show_trace+0x16c/0x170)
[ 254.041321] [<0000000000017578>] show_stack+0x78/0x104
[ 254.041327] [<000000000044d0ca>] dump_stack+0xc6/0xd4
[ 254.041342] [<00000000000949b4>] print_usage_bug+0x1c8/0x1fc
[ 254.041353] [<0000000000094e8a>] mark_lock+0x4a2/0x670
[ 254.041364] [<00000000000950e2>] mark_held_locks+0x8a/0xb4
[ 254.041375] [<0000000000095398>] trace_hardirqs_on_caller+0x74/0x1ac
[ 254.041388] [<00000000000954fa>] trace_hardirqs_on+0x2a/0x38
[ 254.041402] [<000000000025f1ec>] __udelay_disabled+0xac/0xfc
[ 254.041419] [<000000000025f432>] __udelay+0x12a/0x148
[ 254.041433] [<00000000002d64d8>] cio_commit_config+0x170/0x290
[ 254.041451] [<00000000002d6978>] cio_disable_subchannel+0x120/0x1cc
[ 254.041468] [<00000000002e32a4>] ccw_device_recog_done+0x54/0x2f4
[ 254.041485] [<00000000002e3638>] ccw_device_sense_id_done+0x50/0x90
[ 254.041508] [<00000000002e615a>] snsid_callback+0xfa/0x3a8
[ 254.041515] [<00000000002dd96c>] ccwreq_stop+0x80/0x90
[ 254.041523] [<00000000002dda8e>] ccw_request_timeout+0xc2/0xd0
[ 254.041530] [<00000000002e2f70>] ccw_device_request_event+0x58/0x90
[ 254.041537] [<00000000002e47ae>] ccw_device_timeout+0x7e/0x2f0
[ 254.041555] [<000000000006c02a>] run_timer_softirq+0x22a/0x340
[ 254.041566] [<0000000000064eb0>] __do_softirq+0x138/0x2b0
[ 254.041578] [<0000000000024cf6>] do_softirq+0x102/0x108
[ 254.041590] [<00000000000647ce>] irq_exit+0xee/0x114
[ 254.041603] [<0000000000457d88>] do_extint+0x130/0x17c
[ 254.041617] [<000000000002d41e>] ext_no_vtime+0x1e/0x22
[ 254.041631] [<0000000000029faa>] vtime_stop_cpu+0xbe/0x114
[ 254.041646] ([<0000000000029f58>] vtime_stop_cpu+0x6c/0x114)
[ 254.041662] [<000000000001d842>] cpu_idle+0x122/0x1c0
[ 254.041679] [<00000000004482c6>] start_secondary+0xce/0xe0
[ 254.041696] [<0000000000000000>] 0x0
[ 254.041715] [<0000000000000000>] 0x0
[ 254.041745] INFO: lockdep is turned off.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

2.6.31-rc introduced an architecture level set checker based on facility
bits. e.g. if the kernel is compiled to run only on z9, several facility
bits are checked very early and the kernel refuses to boot if a z9 specific
facility is missing.
Until now kvm on s390 did not implement the store facility extended (STFLE)
instruction. A 2.6.31-rc kernel that was compiled for z9 or higher did not
boot in kvm. This patch implements stfle.

This patch should go in before 2.6.31.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

get_krobe_ctlblk returns a per cpu kprobe control block which holds
the state of the current cpu wrt to kprobe.
When inserting/removing a kprobe the state of the cpu which replaces
the code is changed to KPROBE_SWAP_INST. This however is done when
preemption is still enabled. So the state of the current cpu doesn't
necessarily reflect the real state.
To fix this move the code that changes the state to non-preemptible
context.
Reported-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Replace the spinlock used in the idle time accounting with a sequence
counter mechanism analog to seqlock.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Fix build error for !SMP:

arch/s390/power/built-in.o: In function `swsusp_arch_resume':
(.text+0x1b4): undefined reference to `smp_get_phys_cpu_id'
arch/s390/power/built-in.o: In function `swsusp_arch_resume':
(.text+0x288): undefined reference to `smp_switch_boot_cpu_in_resume'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Remove unneeded sanity checks from do_QDIO since this is the hot path.
Change the type of bufnr and count to unsigned int so the check for the
maximum value works.
Reported-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The kernel now has kmemleak and kmemtrace so there's no reason to keep
this ugly s390 hack around. I am not sure how it's supposed to work on
SMP anyway as it uses a global variable to temporarily store the return
value of all kmalloc() calls:

  void *b;

  #define kmalloc(x...) (PRINT_INFO(" kmalloc %p\n",b=kmalloc(x)),b)

Cc: <linux-s390@vger.kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The slab allocator is earlier available so convert the
bootmem allocations to slab/gfp allocations.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This allows the callers to now pass down the full set of FAULT_FLAG_xyz
flags to handle_mm_fault().  All callers have been (mechanically)
converted to the new calling convention, there's almost certainly room
for architectures to clean up their code and then add FAULT_FLAG_RETRY
when that support is added.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In case gcc does something funny with the stack frames, or the return
from function code, we would like to detect that.

An arch may implement passing of a variable that is unique to the
function and can be saved on entering a function and can be tested
when exiting the function. Usually the frame pointer can be used for
this purpose.

This patch also implements this for x86. Where it passes in the stack
frame of the parent function, and will test that frame on exit.

There was a case in x86_32 with optimize for size (-Os) where, for a
few functions, gcc would align the stack frame and place a copy of the
return address into it. The function graph tracer modified the copy and
not the actual return address. On return from the funtion, it did not go
to the tracer hook, but returned to the parent. This broke the function
graph tracer, because the return of the parent (where gcc did not do
this funky manipulation) returned to the location that the child function
was suppose to. This caused strange kernel crashes.

This test detected the problem and pointed out where the issue was.

This modifies the parameters of one of the functions that the arch
specific code calls, so it includes changes to arch code to accommodate
the new prototype.

Note, I notice that the parsic arch implements its own push_return_trace.
This is now a generic function and the ftrace_push_return_trace should be
used instead. This patch does not touch that code.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

avr32, mn10300, parisc, s390, sh, xtensa:

They never set PT_DTRACE, but clear it after do_execve().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: NKyle McMartin <kyle@mcmartin.ca>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NChris Zankel <chris@zankel.net>
Acked-by: NRoland McGrath <roland@redhat.com>
Acked-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert most arches to use asm-generic/kmap_types.h.

Move the KM_FENCE_ macro additions into asm-generic/kmap_types.h,
controlled by __WITH_KM_FENCE from each arch's kmap_types.h file.

Would be nice to be able to add custom KM_types per arch, but I don't yet
see a nice, clean way to do that.

Built on x86_64, i386, mips, sparc, alpha(tonyb), powerpc(tonyb), and
68k(tonyb).

Note: avr32 should be able to remove KM_PTE2 (since it's not used) and
then just use the generic kmap_types.h file.  Get avr32 maintainer
approval.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: <linux-arch@vger.kernel.org>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "Luck Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* create mm/init-mm.c, move init_mm there
* remove INIT_MM, initialize init_mm with C99 initializer
* unexport init_mm on all arches:

  init_mm is already unexported on x86.

  One strange place is some OMAP driver (drivers/video/omap/) which
  won't build modular, but it's already wants get_vm_area() export.
  Somebody should look there.

[akpm@linux-foundation.org: add missing #includes]
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch introduces the hibernation backend support to the
s390 architecture. Now it is possible to suspend a mainframe Linux
guest using the following command:

echo disk > /sys/power/state
Signed-off-by: NHans-Joachim Picht <hans@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

If something goes wrong in a suspend / resume cycle a ccw based console
if very likely in the suspended state and cannot print anything.
Introduce ccw_device_force_console to force the wake up of the console
device to be able to print the oops message. The console device drivers
should use this function only if the system paniced.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Fix the following build failure caused by make allyesconfig using
CONFIG_HIBERNATION and CONFIG_DEBUG_PAGEALLOC

kernel/built-in.o: In function `saveable_page':
kernel/power/snapshot.c:897: undefined reference to `kernel_page_present'
kernel/built-in.o: In function `safe_copy_page':
kernel/power/snapshot.c:948: undefined reference to `kernel_page_present'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: NHans-Joachim Picht <hans@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This patch removes unused asm/suspend.h files for
the following architectures:

 alpha, arm, ia64, m68k, mips, s390, um
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

trivial: fix typos s/paramter/parameter/ and s/excute/execute/ in documentation and source comments.
Signed-off-by: NMartin Olsson <martin@minimum.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Everyone cut and paste this comment from my original one.  We now do
it generically, so cut the comments.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Amerigo Wang <amwang@redhat.com>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

System call tracer support for s390.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>