This patch fixes the missing initialization of the client list node
in the hnae3_register_client() function.

Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Removes the goto and directly returns in case of errors as part of the
cleanup.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During the RX leg driver needs to fetch the ethernet header
length from the RX'ed Buffer Descriptor. Currently, proprietary
version hns3_nic_get_headlen is being used to fetch the header
length which uses l234info present in the Buffer Descriptor
which might not be valid for the first Buffer Descriptor if the
packet is spanning across multiple descriptors.
Kernel default eth_get_headlen API does the job correctly.

Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Reviewed-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the error reported by Intel's kbuild and fixes a
return value in one of the legs, caught during review of the original
patch sent by kbuild.

Fixes: fdb793670a00 ("net: hns3: Add support of .sriov_configure in HNS3 driver")
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit removed calls to rtl_set_rx_mode(). This is ok for the
standard path if the link is brought up, however it breaks system
resume from suspend. Link comes up but no network traffic.

Meanwhile common code from rtl_hw_start_8169/8101/8168() was moved
to rtl_hw_start(), therefore re-add the call to rtl_set_rx_mode()
there.

Due to adding this call we have to move definition of rtl_hw_start()
after definition of rtl_set_rx_mode().
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Fixes: 82d3ff6d ("r8169: remove calls to rtl_set_rx_mode")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before the patch, the erspan BSO bit (Bad/Short/Oversized) is not
handled.  BSO has 4 possible values:
  00 --> Good frame with no error, or unknown integrity
  11 --> Payload is a Bad Frame with CRC or Alignment Error
  01 --> Payload is a Short Frame
  10 --> Payload is an Oversized Frame

Based the short/oversized definitions in RFC1757, the patch sets
the bso bit based on the mirrored packet's size.
Reported-by: NXiaoyan Jin <xiaoyanj@vmware.com>
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2018-05-18

Here's the first bluetooth-next pull request for the 4.18 kernel:

 - Refactoring of the btbcm driver
 - New USB IDs for QCA_ROME and LiteOn controllers
 - Buffer overflow fix if the controller sends invalid advertising data length
 - Various cleanups & fixes for Qualcomm controllers

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 6710f970.

Gotta love when developers have offline discussions, thinking everyone
is reading their responses/dialog.

The change had the potential for a number of race conditions on
shutdown, which is why we are reverting the change.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we use non-NUMA aware allocation for TPD and RRD buffers,
this patch modifies to use NUMA friendly allocation.
Signed-off-by: NHemanth Puranik <hpuranik@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sergei Shtylyov says:

====================
Add Renesas R8A77980 GEther support

Here's a set of 3 patches against DaveM's 'net-next.git' repo. They (gradually)
add R8A77980 GEther support to the 'sh_eth' driver, starting with couple new
register bits/values introduced with this chip, and ending with adding a new
'struct sh_eth_cpu_data' instance connected to the new DT "compatible" prop
value...
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Finally, add support for the DT probing of the R-Car V3H (AKA R8A77980) --
it's the only R-Car gen3 SoC having the GEther controller -- others have
only EtherAVB...

Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The R-Car V3H (AKA R8A77980) GEther controller adds the DMA burst mode bit
(NBST) in EDMR and the manual tells to always set it before doing any DMA.

Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The R-Car V3H (AKA R8A77980) GEther controller  adds support for the RGMII
PHY interface mode as a new  value  for the RMII_MII register.

Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marvell PPv2 Header Parser sets some bits in the 'result_info' field in
each lookup iteration, to identify different packet attributes such as
DSA / VLAN tag, protocol infos, etc. This is used in further
classification stages in the controller.

It's the DSA tag detection entry that is in charge of detecting when there
is a single VLAN tag.

This commits adds the missing update of the result_info in this case.
Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
devlink: introduce port flavours and common phys_port_name generation

This patchset resolves 2 issues we have right now:
1) There are many netdevices / ports in the system, for port, pf, vf
   represenatation but the user has no way to see which is which
2) The ndo_get_phys_port_name is implemented in each driver separatelly,
   which may lead to inconsistent names between drivers.

This patchset introduces port flavours which should address the first
problem. In this initial patchset, I focus on DSA and their port
flavours. As a follow-up, I plan to add PF and VF representor flavours.
However, that needs additional dependencies in drivers (nfp, mlx5).

The common phys_port_name generation is used by mlxsw. An example output
for mlxsw looks like this:

...
pci/0000:03:00.0/59: type eth netdev enp3s0np4 flavour physical number 4
pci/0000:03:00.0/61: type eth netdev enp3s0np1 flavour physical number 1
pci/0000:03:00.0/63: type eth netdev enp3s0np2 flavour physical number 2
pci/0000:03:00.0/49: type eth netdev enp3s0np8s0 flavour physical number 8 split_group 8 subport 0
pci/0000:03:00.0/50: type eth netdev enp3s0np8s1 flavour physical number 8 split_group 8 subport 1
pci/0000:03:00.0/51: type eth netdev enp3s0np8s2 flavour physical number 8 split_group 8 subport 2
pci/0000:03:00.0/52: type eth netdev enp3s0np8s3 flavour physical number 8 split_group 8 subport 3

As you can see, the netdev names are generated according to the flavour
and port number. In case the port is split, the split subnumber is also
included.

An example output for dsa_loop testing module looks like this:
mdio_bus/fixed-0:1f/0: type eth netdev lan1 flavour physical number 0
mdio_bus/fixed-0:1f/1: type eth netdev lan2 flavour physical number 1
mdio_bus/fixed-0:1f/2: type eth netdev lan3 flavour physical number 2
mdio_bus/fixed-0:1f/3: type eth netdev lan4 flavour physical number 3
mdio_bus/fixed-0:1f/4: type notset
mdio_bus/fixed-0:1f/5: type notset flavour cpu number 5
mdio_bus/fixed-0:1f/6: type notset
mdio_bus/fixed-0:1f/7: type notset
mdio_bus/fixed-0:1f/8: type notset
mdio_bus/fixed-0:1f/9: type notset
mdio_bus/fixed-0:1f/10: type notset
mdio_bus/fixed-0:1f/11: type notset

---
RFC->v1:
-removed nfp patches, removed DSA patch that used name generation helper
-patch 1:
 - Reduced the nfp change just to simply use newly created attr_set func
-patch 2:
 - rebased
 - removed pf/vf reps flavours
-patch 3:
 - rebased
-patch 4:
 - added missing break pointed out by Andrew
====================
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since devlink knows the info needed to generate the physical port name
in a generic way for all devlink users, use the helper to do the job.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set the attrs and allow to expose port flavour to user via devlink.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each driver implements physical port name generation by itself. However
as devlink has all needed info, it can easily do the job for all its
users. So implement this helper in devlink.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Devlink ports can have specific flavour according to the purpose of use.
This patch extend attrs_set so the driver can say which flavour port
has. Initial flavours are:
physical, cpu, dsa
User can query this to see right away what is the purpose of each port.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change existing setter for split port information into more generic
attrs setter. Alongside with that, allow to set port number and subport
number for split ports.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some HW specific setups, like sun8i, do not populate all the necessary
callbacks, which is what HWIF helpers were expecting.

Fix this by always trying to get the generic helpers and populate them
if they were not previously populated by HW specific setup.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Fixes: 5f0456b4 ("net: stmmac: Implement logic to automatically
select HW Interface")
Reported-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For T6, collect info on queue mapping to corresponding PF/VF in SGE.
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch on the Marvell PPv2 driver is only cosmetic. Two typos are
removed as well as other cosmetic fixes, such as extra new lines or tabs
vs spaces.
Suggested-by: NStefan Chulski <stefanc@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in printk message text
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: 20b654df ("tcp: support DUPACK threshold in RACK")
Signed-off-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
net/smc: cleanups 2018-05-18

here are SMC patches for net-next providing restructuring and cleanup
in different areas.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch splits up the functions smc_connect_rdma and smc_listen_work
into smaller functions.
Signed-off-by: NHans Wippel <hwippel@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the function smc_buf_free to use the SMC link group
instead of the link as function parameter. Also, it changes the order of
the other two parameters.
Signed-off-by: NHans Wippel <hwippel@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch consists of Christmas tree fixes and removal of an unneeded
function parameter.
Signed-off-by: NHans Wippel <hwippel@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves a CDC sanity check from smc_cdc_msg_recv_action() to
the other sanity checks in smc_cdc_rx_handler(). While doing this, it
simplifies smc_cdc_msg_recv() and removes unneeded function parameters.
Signed-off-by: NHans Wippel <hwippel@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SMC connection and buffer handling belong to smc_core. So, this patch
moves this code from smc.h to smc_core.
Signed-off-by: NHans Wippel <hwippel@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the write offset within the RMB is calculated on each write
operation although it is fixed for each connection. With this patch, the
offset is calculated once and stored in a connection specific variable.
Signed-off-by: NHans Wippel <hwippel@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The connection index is actually a RMBE index. So, this patch changes
the name accordingly.
Signed-off-by: NHans Wippel <hwippel@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the global link group list to smc_core where the link
group functions are. To make this work, it moves code in af_smc and
smc_ib that operates on the link group list to smc_core as well.

While at it, the link group counter is integrated into the list
structure and initialized to zero.
Signed-off-by: NHans Wippel <hwippel@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In addition to the buffer references, SMC currently stores the sizes of
the receive and send buffers in each connection as separate variables.
This patch introduces a buffer length variable in the common buffer
descriptor and uses this length instead.
Signed-off-by: NHans Wippel <hwippel@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5e-updates-2018-05-17

From: Or Gerlitz <ogerlitz@mellanox.com>

This series addresses a regression introduced by the
shared block TC changes [1]. Currently, for VF->VF and uplink->VF rules, the
TC core (cls_api) attempts to offload the same flow multiple times into
the driver, as a side effect of the mlx5 registration to the egdev callback.

We use the flow cookie to ignore attempts to add such flows, we can't
reject them (return error), b/c this will fail the offload attempt, so we
ignore that.

The last patch of the series deals with exposing HW stats counters through
ethtool for the vport reps.

Dave - the regression that we are addressing was introduced in 4.15 [1] and applies
to nfp and mlx5. Jiri suggested to push driver side fixes to net-next, this is
already done for nfp [2][3]. Once this is upstream, we will submit a small/point
single patch fix for the TC core code which can serve for net and stable, but not
carried into net-next, b/c it might limit some future use-cases.

[1] 208c0f4b "net: sched: use tc_setup_cb_call to call per-block callbacks"
[2] c50647d3 "nfp: flower: ignore duplicate cb requests for same rule"
[3] 54a4a034 "nfp: flower: support offloading multiple rules with same cookie"
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2018-05-17

mlx5 core dirver updates for both net-next and rdma-next branches.

From Christophe JAILLET, first three patche to use kvfree where needed.

From: Or Gerlitz <ogerlitz@mellanox.com>

Next six patches from Roi and Co adds support for merged
sriov e-switch which comes to serve cases where both PFs, VFs set
on them and both uplinks are to be used in single v-switch SW model.
When merged e-switch is supported, the per-port e-switch is logically
merged into one e-switch that spans both physical ports and all the VFs.

This model allows to offload TC eswitch rules between VFs belonging
to different PFs (and hence have different eswitch affinity), it also
sets the some of the foundations needed for uplink LAG support.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: implement SACK compression

When TCP receives an out-of-order packet, it immediately sends
a SACK packet, generating network load but also forcing the
receiver to send 1-MSS pathological packets, increasing its
RTX queue length/depth, and thus processing time.

Wifi networks suffer from this aggressive behavior, but generally
speaking, all these SACK packets add fuel to the fire when networks
are under congestion.

This patch series adds SACK compression, but the infrastructure
could be leveraged to also compress ACK in the future.

v2: Addressed Neal feedback.
    Added two sysctls to allow fine tuning, or even disabling the feature.

v3: take rtt = min(srtt, rcv_rtt) as Yuchung suggested, because rcv_rtt
    can be over estimated for RPC (or sender limited)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This per netns sysctl allows for TCP SACK compression fine-tuning.

This limits number of SACK that can be compressed.
Using 0 disables SACK compression.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This per netns sysctl allows for TCP SACK compression fine-tuning.

Its default value is 1,000,000, or 1 ms to meet TSO autosizing period.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>