When we write new values for the DDB allocation and WM parameters, we now
need to trigger the double buffer update for the pipe to take the new
configuration into account.

As the DDB is a global resource shared between planes, enabling or
disabling one plane will result in changes for all planes that are
currently in use, thus the need write PLANE_SURF/CUR_BASE for more than
the plane we're touching.

v2: Don't wait for pipes that are off

v3: Split the staging results structure to not exceed the 1Kb stack
    allocation in skl_update_wm()

v4: Rework and document the algorithm after Ville found that it was all
    wrong.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To correctly flush the new DDB allocation we need to know about the pipe
allocation layout inside the DDB in order to sequence the re-allocation
to not cause a newly allocated pipe to fetch from a space that was
previously allocated to another pipe.

This patch preserves the per-pipe (start,end) allocation to be used in
the flush.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We can reduce the indentation level by continuing early.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The transition WMs code was doing a shortcut and the values were copied
from the WM0 ones at compute_wm_results() time. Going forward, we want
to compute them like the other WMs and resolve their final register
values in the same way as well.

This patch does just that and isolate the transtion WM compute code in
skl_compute_transition_wm() while skl_compute_wm_results() takes care of
the register values.

We also take the opportunity to disable the transition WMs for now.
We've noticed underruns and they seem to be the culprit.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The DDB allocation code managed to split in two the compute functions.

Bring back skl_compute_transition_wm() and skl_compute_linetime_wm()
with their little friends.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To align with the ilk WM code and because it makes sense to test against
the upper bounds as soon as possible on variables that are bigger than
the number of bits in the register, let's move the maximum checks from
skl_compute_wm_results() to skl_compute_plane_wm().

v2: Leave the result values to 0 when overflowing the limits (Ville)
    Use 32 bits intermediate variables (Damien)

Instead of using the 16 and 8 bits space we have in the result
structure, use 32 bits local variables until we're sure they fit into
the constraints.
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

What we're talking about here is the DDB allocation (in blocks). That's
more descriptive than 'max_page_buff_alloc'.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Ville suggested that we should use the same semantics as C arrays to
reduce the number of those pesky +1/-1 in the allocation code.

This patch leaves the debugfs file as is, showing the internal DDB
allocation structure, not the values written in the registers.

v2: Remove the test on ->end in skl_ddb_entry_size() (Ville)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Don't check DDB on pre-SKL platforms
    Don't check DDB state on disabled pipes

v3: Squash "Expose skl_ddb_get_hw_state()"
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: minor conflict in i915_debugfs.c
v3: Rebase on top of the for_each_pipe() change adding dev_priv as first
    argument.
v4: minor conflict in the i915_debugfs_files array
v5: minor conflict in the i915_debugfs_files array
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Use the gen >= 9 in the debugfs file condition (Ville)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This logically belongs to the WM state, so do it there.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We're going to add a new step, let's not hide the copy of the new WM
state inside one inner function, but as a 1st level operation in the WM
update.

v2: Split the staging results structure to not exceed the 1Kb stack
    allocation in skl_update_wm()
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

According to updated BSpec, If level 1 or any higher level has a value of 0x00,
that level and any higher levels are unused and the associated watermark
registers must not be enabled.

This patch checks for latency 0 for level >=1 and does not enable WM
corresponding to level m | m>=n, if level n (n != 0) has a 0us latency.

v2: Satheesh's review comments
	- zero-out latency values (for all higher levels if latency of given
	level is zero ) in read_wm_latency() function itself

v3: removed redundant check as per Satheesh's observation.
v4: rebase on top before merging (Damien)
v5: Rebase on top of the default value removal (Ville)

Reviewed-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v3)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

According to the updated Bspec, The mailbox response data is not currently
accounting for memory read latency. Add 2 microseconds to the result for
each level.
This patch adds 2us to latency of level 0 for all cases and
for all other levels (1-7) only if latency[level] > 0.

v2: Slightly rework the patch and add a big comment (Damien)
v3: Rebase on top of the renames of the memory latency defines

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v1)
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2)
Reviewed-by: M, Satheeshakrishna <satheeshakrishna.m@intel.com> (v1)
Cc: Lespiau, Damien <damien.lespiau@intel.com>
Cc: M, Satheeshakrishna <satheeshakrishna.m@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch provides the implementation for reading the pipe wm HW
state.

v2: Incorporated Damien's review comments and also made modifications
    to incorporate the plane/cursor split.

v3: No need to ident a line that was fitting 80 chars
    Return early instead of indenting the remaining of a function
    (Damien)

v4: Rebase on top of nightly (minor conflict in intel_drv.h)
v5: Rebase on top of nightly (minor conflict in intel_drv.h)
v6: Rebase on top of nightly (minor conflict in intel_drv.h)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NPradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Adapt to the planes/cursor split
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Fix the 3rd plane/cursor logic (Pradeep Bhat)
v3: Fix one-by-one error in the DDB allocation code
v4: Rebase on top of the skl_pipe_pixel_rate() argument change
v5: Replace the available/start/end output parameters of
    skl_ddb_get_pipe_allocation_limits() by a single ddb entry constify
    a few arguments
    Make nth_active_pipe 0 indexed
    Use sizeof(variable) instead of sizeof(type)
    (Ville)
v6: Use the for_each_crtc() macro instead of list_for_each_entry()
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch implements the watermark algorithm and its necessary
functions. Two function pointers skl_update_wm and
skl_update_sprite_wm are provided. The skl_update_wm will update
the watermarks for the crtc provided as an argument and then
checks for change in DDB allocation for other active pipes and
recomputes the watermarks for those Pipes and planes as well.
Finally it does the register programming for all dirty pipes.
The trigger of the Watermark double buffer registers will have
to be once the plane configurations are done by the caller.

v2: fixed the divide-by-0 error in the results computation func.
    Also reworked the PLANE_WM register values computation func to
    make it more compact. Incorporated all other review comments
    from Damien.

v3: Changed the skl_compute_plane_wm function to now return success
    or failure. Also the result blocks and lines are computed here
    instead of in skl_compute_wm_results function.

v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split
    (Damien)

v5: Reworked the affected functions to implement new plane/cursor
    split.

v6: Rework the logic that triggers the DDB allocation and WM computation
    of skl_update_other_pipe_wm() to not depend on non-computed DDB
    values.
    Always give a valid cursor_width (at boot it's 0) to keep the
    invariant that we consider the cursor plane always enabled.
    Otherwise we end up dividing by 0 in skl_compute_plane_wm()
    (Damien Lespiau)

v7: Spell out allocation
    skl_ddb_ functions should have the ddb as first argument
    Make the skl_ddb_alloc_changed() parameters const
    (Damien)

v8: Rebase on top of the crtc->primary changes

v9: Split the staging results structure to not exceed the 1Kb stack
    allocation in skl_update_wm()

v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config
     Add a comment about overflow considerations for skl_wm_method1()
     Various additions of const
     Various use of sizeof(variable) instead of sizeof(type)
     Various move of variable definitons to a narrower scope
     Zero initialize some stack allocated structures to make sure we
     don't have garbage in case we don't write all the values
     (Ville)

v11: Remove non-necessary default number of blocks/lines when the plane
     is disabled (Ville)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NPradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We now need to allocate space in the DDB for planes being scanned out
ourselves. The data structure to represent an allocation mirrors what
we'll need to write in the registers later on: (start, end).

We add that allocation datat to the skl_wm_values structure as part of
the values to program the hardware with.

v2: Split planes and cursor for consistency.

v3: Make the skl_ddb_entry_size() parameter const
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch defines the structures needed for computation of
watermarks of pipes and planes for SKL.

v2: Incorporated Damien's review comments and removed unused fields
    in structs for future features like rotation, drrs and scaling.
    The skl_wm_values struct is now made more generic across planes
    and cursor planes for all pipes.

v3: implemented the plane/cursor split.

v4: Change the wm union back to a structure (Ville, Daniel)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NPradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch defines SKL specific PLANE_WM Watermark registers. It also
defines macros to get the addresses of different LP levels within a pipe.

v2: Reworked the register definitions and associated macros to make it more
    generic and be able to use for_each_pipe in values computation.
    Incorporated Damien's review comments and indentation.

v3: Added default values for lines and blocks. Provided mask for blocks.

v4: Prefix intermedidate (internal-only) macros with _ (Ville)

v5: Remove the lines and block defaults value (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v4)
Signed-off-by: NPradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch reads the memory latency values for all the 8 levels for
SKL. These values are needed for the Watermark computation.

v2: Incorporated the review comments from Damien on register
    indentation.

v3: Updated the code to use the sandybridge_pcode_read for reading
    memory latencies for GEN9.

v4: Don't put gen 9 in the middle of an ordered list of ifs
    (Damien)

v5: take the rps.hw_lock around sandybridge_pcode_read() (Damien)

v6: Use gen >= 9 in the pcode_read() function for data1.
    Move the defines near the gen6 ones and prefix them with PCODE.
    Remove unused timeout define (the pcode_read() code has a larger
    timeout already).
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NPradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There's some serious confusion regarding ELD valid bit that gets set and
cleared back and forth etc. Rewrite it all based on the documented audio
codec enable/disable sequences.

v3: replace vblank wait with a comment

v4: expand the comment on what should be done with the vblank wait
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Make audio related register defines conform to existing style: Add _MASK
where relevant, indent the defines for register contents, don't indent
the defines for register addresses, prefix pipe specific register
address defines with underscores, drop self explanatory comments.

No functional changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Userspace cares about whether or not swizzling depends on the page
address for its direct access into bound objects. Extend the get_tiling
ioctl to report the physical swizzling value in addition to the logical
swizzling value so that userspace can accurately determine when it is
possible for manual detiling.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Testcase: igt/gem_tiled_wc
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Always require PIN_GLOBAL when we want a mappable offset (PIN_MAPPABLE).
This causes the pin to fixup the global binding in cases were the vma
was already bound (and due to the proceeding bug, we considered it to be
already mappable).

References: https://bugs.freedesktop.org/show_bug.cgi?id=85671Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Add WARN_ON to check that PIN_MAP implies PIN_GLOBAL as
discussed on irc.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We use the obj->map_and_fenceable hint for when we already have a
valid mapping of this object in the aperture. This hint can only apply
to the GGTT and not to the aliasing-ppGTT. One user of the hint is
execbuffer relocation, which began to fail when it tried to follow the
hint and perform the relocate through the non-existent GGTT mapping.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85671Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we program just DPSCNTR and DSPSTRIDE directly from the ring
interrupt handler, which is fine since the hardware guarantees that
those are update atomically. When we have atomic page flips we'll want
to be able to update also the offset registers, and then we need to use
the vblank evade mechanism to guarantee atomicity. Since that mechanism
introduces a wait, we need to do the actual register write from a work
when it is triggered by the ring interrupt.

v2: Explain the need for mmio_flip.work in the commit message (Paulo)
    Initialize the mmio_flip work in intel_crtc_init() (Paulo)
    Prevent new flips the previous flip work finishes (Paulo)
    Don't acquire modeset locks for mmio flip work

Note: Paulo had reservations about the work item leaking over a plane
disable. But insofar as we do lack these checks that issue is already
present with the existing code.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A follow up patch will call this funcion from a work context for the
mmio flip, in which case we cannot acquire the modeset locks. That's
not a problem though, since the check is there to protect vblank and
the mode, but the code that changes that waits for pending flips
first.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Note that a later patch will use these functions in some other file
and drop the static. Hence the kerneldoc looks appropriate.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Add comment that the functions will become non-static
shortly.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

An earlier commit (c8725f3d: Do not call
retire_requests from wait_for_rendering) removed the use of the ring parameter
within wait_rendering__tail() but did not remove the parameter itself. As the
plan is to remove obj->ring which is where this parameter comes from, it is
simpler to just remove the parameter completely than to update it with a new
source.

For: VIZ-4377
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: Brad Volkin <bradley.d.volkin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With this patch, the RPS sequence for runtime suspend/resume is
exactly like the sequence for S3 suspend/resume:
 - flush_delayed_work(&dev_priv->rps.delayed_resume_work)
 - intel_runtime_pm_disable_interrupts()
 - intel_suspend_gt_powersave()
   (suspended)
 - intel_runtime_pm_enable_interrupts()
 - intel_enable_gt_powersave()

With this, we get rid of WARNs that are currently intermittently
triggered by the system-suspend-execbuf subtest of runtime PM. Notice
that these WARNs could also be triggered in other ways that involved
doing lots of RPM suspend/resume cycles just after a system S3 resume.

Testcase: igt/pm_rpm/system-suspend-execbuf
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=82939Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fix the message, not the fault :)

This is what I see:
[  282.108597] [drm:i915_check_and_clear_faults] Unexpected fault
[  282.108597] 	Addr: 0x00000000\n	Address space: PPGTT
[  282.108597] 	Source ID: 24
[  282.108597] 	Type: 0
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There are two leftover GTIIR writes in valleyview_irq_preinstall().
Looks like the were originally left behind by:

 commit d18ea1b5
 Author: Daniel Vetter <daniel.vetter@ffwll.ch>
 Date:   Fri Jul 12 22:43:25 2013 +0200

    drm/i915: unify PM interrupt preinstall sequence

and then the GTIIR reset was added back here:

 commit f86f3fb0
 Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
 Date:   Tue Apr 1 15:37:14 2014 -0300

    drm/i915: properly clear IIR at irq_uninstall on Gen5+

so we can kill the leftovers from the vlv code.

Cc: Paulo Zanoni <przanoni@gmail.com>
Suggested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The extra VLV_IIR writes at the end of vlv_display_irq_postinstall()
serve no purpose. Remove them.

The VLV_IMR/IER/IIR setup at the start of the function also seems a bit
pointless since it doesn't unmask/enable anything. But leave it be for
now.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Split the vlv display irq postinstall code to a separate function so
that we can share it with chv.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Pull the vlv display irq reset code to a new functions. The aim is to
share the code with chv.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>