- 20 3月, 2014 2 次提交
-
-
由 Dan Williams 提交于
Commit bc6e7c4b "libata, libsas: kill pm_result and related cleanup" renamed ata_sas_port_async_resume() to ata_sas_port_resume(), but missed a CONFIG_PM=n stub conversion. Randy fixed that up in commit a5a65699 "libata.h: add stub for ata_sas_port_resume", but missed the deletion of the now unused ata_sas_port_async_resume() routine. Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Randy Dunlap 提交于
Fix build error when CONFIG_PM is not enabled by adding a stub function in <linux/libata.h>. drivers/scsi/libsas/sas_ata.c: In function 'sas_resume_sata': drivers/scsi/libsas/sas_ata.c:756:3: error: implicit declaration of function 'ata_sas_port_resume' [-Werror=implicit-function-declaration] Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Reported-by: NJim Davis <jim.epost@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com>
-
- 19 3月, 2014 3 次提交
-
-
由 Todd Brandt 提交于
Improve overall system resume time by making libata link recovery actions asynchronous relative to other resume events. Link resume operations are performed using the scsi_eh thread, so commands, particularly the sd resume start/stop command, will be held off until the device exits error handling. Libata already flushes eh with ata_port_wait_eh() in the port teardown paths, so there are no concerns with async operation colliding with the end-of-life of the ata_port object. Also, libata-core is already careful to flush in-flight pm operations before another round of pm starts on the given ata_port. Reference: https://01.org/suspendresume/blogs/tebrandt/2013/hard-disk-resume-optimization-simpler-approach Cc: Len Brown <len.brown@intel.com> Cc: Phillip Susi <psusi@ubuntu.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NTodd Brandt <todd.e.brandt@linux.intel.com> [djbw: rebase on cleanup patch, changelog wordsmithing] Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Dan Williams 提交于
Tejun says: "At least for libata, worrying about suspend/resume failures don't make whole lot of sense. If suspend failed, just proceed with suspend. If the device can't be woken up afterwards, that's that. There isn't anything we could have done differently anyway. The same for resume, if spinup fails, the device is dud and the following commands will invoke EH actions and will eventually fail. Again, there really isn't any *choice* to make. Just making sure the errors are handled gracefully (ie. don't crash) and the following commands are handled correctly should be enough." The only libata user that actually cares about the result from a suspend operation is libsas. However, it only cares about whether queuing a new operation collides with an in-flight one. All libsas does with the error is retry, but we can just let libata wait for the previous operation before continuing. Other cleanups include: 1/ Unifying all ata port pm operations on an ata_port_pm_ prefix 2/ Marking all ata port pm helper routines as returning void, only ata_port_pm_ entry points need to fake a 0 return value. 3/ Killing ata_port_{suspend|resume}_common() in favor of calling ata_port_request_pm() directly 4/ Killing the wrappers that just do a to_ata_port() conversion 5/ Clearly marking the entry points that do async operations with an _async suffix. Reference: http://marc.info/?l=linux-scsi&m=138995409532286&w=2 Cc: Phillip Susi <psusi@ubuntu.com> Cc: Alan Stern <stern@rowland.harvard.edu> Suggested-by: NTejun Heo <tj@kernel.org> Signed-off-by: NTodd Brandt <todd.e.brandt@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Loc Ho 提交于
This patch fixes an compiler warning with APM X-Gene host controller driver when compiled with DEBUG enabled. Signed-off-by: NLoc Ho <lho@apm.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 18 3月, 2014 4 次提交
-
-
由 Loc Ho 提交于
This patch adds APM X-Gene SoC AHCI SATA host controller DTS entries. Signed-off-by: NLoc Ho <lho@apm.com> Signed-off-by: NTuan Phan <tphan@apm.com> Signed-off-by: NSuman Tripathi <stripathi@apm.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Loc Ho 提交于
This patch adds support for the APM X-Gene SoC AHCI SATA host controller driver. It requires the corresponding APM X-Gene SoC PHY driver. This initial version only supports Gen3 speed. Signed-off-by: NLoc Ho <lho@apm.com> Signed-off-by: NTuan Phan <tphan@apm.com> Signed-off-by: NSuman Tripathi <stripathi@apm.com> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Loc Ho 提交于
This patch adds documentation for the APM X-Gene SoC SATA host controller DTS binding. Signed-off-by: NLoc Ho <lho@apm.com> Signed-off-by: NTuan Phan <tphan@apm.com> Signed-off-by: NSuman Tripathi <stripathi@apm.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Loc Ho 提交于
This patch adds the DTS entries for the APM X-Gene SoC 15Gbps Multi-purpose PHY driver. The PHY for SATA controller 2 and 3 are enabled by default. Signed-off-by: NLoc Ho <lho@apm.com> Signed-off-by: NTuan Phan <tphan@apm.com> Signed-off-by: NSuman Tripathi <stripathi@apm.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 17 3月, 2014 2 次提交
-
-
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NHans de Goede <hdegoede@redhat.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NHans de Goede <hdegoede@redhat.com>
-
- 15 3月, 2014 4 次提交
-
-
devm_ioremap_resource() returns a pointer to the remapped memory or an ERR_PTR() encoded error code on failure. Fix the check inside ahci_platform_get_resources() accordingly. Also while at it remove a needless line break. Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
devm_ioremap_resource() returns a pointer to the remapped memory or an ERR_PTR() encoded error code on failure. Fix the check inside pata_imx_probe() accordingly. Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
struct ahci_platform_data is deprecated (please see comments in <linux/ahci_platform.h> for details). Convert ahci_st driver to use custom ->host_stop method instead. Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
* The config option for ahci_st driver was renamed from CONFIG_SATA_AHCI_ST to CONFIG_AHCI_ST but Makefile was not updated. Fix it (also while at it move the ahci_st driver entry below ahci_imx and ahci_sunxi ones). * Fix a few build issues in the ahci_st driver itself. Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 14 3月, 2014 10 次提交
-
-
由 Aaron Lu 提交于
Now that we can directly get the ACPI device conterpart of the physical ATA transport device, the odd_can_poweroff can be eliminated. Signed-off-by: NAaron Lu <aaron.lu@intel.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Aaron Lu 提交于
If ACPI handle for an ATA device is NULL, we shouldn't call ata_dev_get_GTF as that function will use handle to do some ACPI evaluation. Signed-off-by: NAaron Lu <aaron.lu@intel.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Aaron Lu 提交于
ZPODD is built on top of runtime PM functionality, it doesn't make sense to have it in a kernel that doesn't have CONFIG_PM_RUNTIME set. Signed-off-by: NAaron Lu <aaron.lu@intel.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Jean Delvare 提交于
The SC1200 is a SoC based on the Geode GX1 32-bit x86 processor, so its drivers are only needed on this architecture, except for build testing purpose. Signed-off-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Lee Jones 提交于
This is where we disable IRQs on suspend and update the internal power state during suspend/resume. Suggested-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Lee Jones 提交于
This device is designed specifically to run on ST-Microelectronics' hardware. To ensure no attempts are made to run on anything incompatible we add a dependency on ST architecture Suggested-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Lee Jones 提交于
ata_platform_remove_one() allows us to specify our own exit function via platform data then goes off and removes ATA Host and Port in preparation for device removal. Suggested-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Lee Jones 提交于
Suggested-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Lee Jones 提交于
Other devices have adopted similar naming conventions which have been accepted as the standard. This patch brings any mention of the the ST AHCI driver into line with them. Suggested-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Lee Jones 提交于
Acked-by: NAlexandre Torgue <alexandre.torgue@st.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 11 3月, 2014 2 次提交
-
-
由 Silvan Jegen 提交于
The current flow of control prevents this function from being called. Let's remove the call. Signed-off-by: NSilvan Jegen <s.jegen@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Jean Delvare 提交于
As far as I know, the CS5520 and CS5530 chipsets were only used with 32-bit x86 Geode processors, so I think their drivers are only needed on this architecture, except for build testing purpose. While we're here, simplify the dependencies for the CS5535 driver. The CS5536 was used with the Geode processors, but also on MIPS Loongson/Lemote 2 systems, so let its driver be built for these two architectures only, except for build testing purpose. Signed-off-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org>
-
- 08 3月, 2014 1 次提交
-
-
由 Dan Williams 提交于
Prompted by the social effort in the US to discourage usage of the adjective "retarded". In this case we needlessly anthropomorphize hard drives. The implication is that due to design deficiencies in the device reset recovery time is negatively impacted. We can simply clearly state that fact. "Exceptional devices cause outliers in reset recovery time." This steers clear of any unintended comparison of such devices to humans with cognitive disabilities. Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 07 3月, 2014 1 次提交
-
-
由 Hans de Goede 提交于
This fixes the following warnings when CONFIG_PM_SLEEP is not set: drivers/ata/ahci_imx.c:284:12: warning: ‘imx_ahci_suspend’ defined but not used [-Wunused-function] drivers/ata/ahci_imx.c:299:12: warning: ‘imx_ahci_resume’ defined but not used [-Wunused-function] Reported-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 24 2月, 2014 1 次提交
-
-
由 Hans de Goede 提交于
ahci_sunxi_phy_init is called from the probe and resume code paths, and sleeping is safe in both, so use msleep instead of mdelay. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 23 2月, 2014 10 次提交
-
-
由 Hans de Goede 提交于
These members are not used anywhere, and in the future we want ahci_platform_data to go away entirely so there is no reason to keep these around. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Hans de Goede 提交于
Since the 3.13 release the ahci_imx driver has proper devicetree enabled support for ahci on imx53 and that is used instead of the old board file created imx53-ahci platform device. Note this patch also complete drops the id-table, an id-table is not needed for a single id platform driver, the name field in the driver struct suffices. And the code already has an explicit "MODULE_ALIAS("platform:ahci");" so the id-table is not needed for that either. Cc: Marek Vasut <marex@denx.de> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Hans de Goede 提交于
I've done a grep over the entire kernel tree and nothing is using this (anymore?). Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Roger Quadros 提交于
On OMAP platforms the device needs to be runtime resumed before it can be accessed. The OMAP HWMOD framework takes care of enabling the module and its resources based on the device's runtime PM state. In this patch we runtime resume during .probe() and runtime suspend after .remove(). We also update the runtime PM state during .resume(). CC: Balaji T K <balajitk@ti.com> Signed-off-by: NRoger Quadros <rogerq@ti.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Roger Quadros 提交于
Some platforms have a PHY hooked up to the SATA controller. The PHY needs to be initialized and powered up for SATA to work. We do that using the PHY framework. tj: Minor comment formatting updates. CC: Balaji T K <balajitk@ti.com> Signed-off-by: NRoger Quadros <rogerq@ti.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo<tj@kernel.org>
-
由 Roger Quadros 提交于
The ahci_platform driver supports "snps,dwc-ahci". Add this to the DT binding information. Signed-off-by: NRoger Quadros <rogerq@ti.com> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Roger Quadros 提交于
Add compatible string "snps,dwc-ahci", which should be used for Synopsis Designware SATA cores. e.g. on TI OMAP5 and DRA7 platforms. Signed-off-by: NRoger Quadros <rogerq@ti.com> Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Hans de Goede 提交于
This avoids the ugliness of creating a nested platform device from probe. While moving it around anyways, move the mk6q phy init code from probe to imx_sata_enable, as the phy needs to be re-initialized on resume too, otherwise the drive won't be recognized after resume. Tested on a wandboard i.mx6 quad. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Olliver Schinagl 提交于
This patch adds support for the ahci sata controler found on Allwinner A10 and A20 SoCs to the ahci_platform driver. Orignally written by Olliver Schinagl using the approach of having a platform device which probe method creates a new child platform device which gets driven by ahci_platform.c, as done by ahci_imx.c . Refactored by Hans de Goede to add most of the non sunxi specific functionality to ahci_platform.c and use a platform_data pointer from of_device_id for the sunxi specific bits. Signed-off-by: NOlliver Schinagl <oliver@schinagl.nl> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Hans de Goede 提交于
Split suspend / resume code into host suspend / resume functionality and resource enable / disabling phases, and export the new suspend_ / resume_host functions. tj: Minor comment formatting updates. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-