OSA and HiperSocket devices do not support promiscuous mode proper,
but they support "BRIDGE PORT" mode that is functionally similar.
This update introduces sysfs attribute that, when set, makes the driver
try to "reflect" setting and resetting of the IFF_PROMISC flag on the
interface into setting and resetting PRIMARY or SECONDARY bridge port
role on the underlying OSA or HiperSocket device.
Reviewed-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: NEugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Locking is probably unnecessary in this case, and the rest of the
qeth sysfs code does not use locks in the *_show() functions.
Remove locks from the layer2 *_show() functions in which they where
accidentally introduced.
Signed-off-by: NEugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function that executes IPA commands returns the result code from the
IPA response block. If non-negative, it needs to be transformed into
errno-compatible code before returning to the caller.
Signed-off-by: NEugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ethtool is used to change some device driver features
such as RX/TX hardware checksum offloading.
The qeth device driver callback function to
turn on/off RX hardware check sum handling never changes
the hardware configuration.
The NETIF_F_RXCSUM bit is cleared when the feature bitset
type netdev_features_t(64bit) is assigned to 32 a bit
variable.

This patch fixes the NETIF_F_RXCSUM handling.
Also there is no need to manipulate the device's features
bit set as this is done by the caller when no error occurs.
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we use a global rover to select a port ID that is unique.
This used to work consistently when it was protected with a global
lock.  However as we're now lockless, the global rover can exhibit
pathological behaviour should multiple threads all stomp on it at
the same time.

Granted this will eventually resolve itself but the process is
suboptimal.

This patch replaces the global rover with a pseudorandom starting
point to avoid this issue.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The spinlock is used to protect netns_ids which is per net,
so there is no need to use a global spinlock.

Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MoCA interfaces require the use of an user-space daemon (mocad) which
will typically use cmd->autoneg to force the link. This is causing other
network manager applications not to get proper carrier down
notifications because of the following sequence of events:

- link down interrupt is received, link is set to 0 by the interrupt
  handler
- fixed_link update callback runs and updates the BMSR register
  accordingly
- PHY library polls the PHY for link status, sees the link is down,
  proceeds with reporting that
- mocad gets notified of the link state and call phy_ethtool_sset()
  with cmd->autoneg set to the link status (0)
- phy_start_aneg() is called at the end of phy_ethtool_sset() and sets
  the PHY state to PHY_FORCING

Just make sure we notify the interface carrier appropriately when we
detect that the link is down in our fixed_link update callback. This is
made local to the bcm_sf2 driver as the PHY library does the right thing
in any case. This is similar to the GENET change introduced in
54d7c01d ("net: bcmgenet: enable MoCA
link state change detection").

Fixes: 246d7f77 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: 06635a35 ("flow_dissect: use programable dissector in skb_flow_dissect and friends")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the struct netvsc_stats has a member s_sync
of type u64_stats_sync.
This definition will break kernel build as the macro
netdev_alloc_pcpu_stats requires this member name to be syncp.
(see netdev_alloc_pcpu_stats definition in ./include/linux/netdevice.h)

This patch changes netvsc_stats's member name from s_sync to syncp to fix
the build break.
Signed-off-by: NSimon Xiao <sixiao@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- introduce port fdb obj and generic switchdev_port_fdb_add/del/dump()
- use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops.
- add support for fdb obj in switchdev_port_obj_add/del/dump()
- switch rocker to implement fdb ops via switchdev_ops

v3: updated to sync with named union changes.
Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: better handling of memory pressure

When testing commit 790ba456 ("tcp: set SOCK_NOSPACE under memory
pressure") using edge triggered epoll applications, I found various
issues under memory pressure and thousands of active sockets.

This patch series is a first round to solve these issues, in send
and receive paths. There are probably other fixes needed, but
with this series, my tests now all succeed.

v2: fix typo in "allow one skb to be received per socket under memory pressure",
as spotted by Jason Baron.
====================
Acked-by: NJason Baron <jbaron@akamai.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allowing tcp to use ~19% of physical memory is way too much,
and allowed bugs to be hidden. Add to this that some drivers use a full
page per incoming frame, so real cost can be twice the advertized one.

Reduce tcp_mem by 50 % as a first step to sanity.

tcp_mem[0,1,2] defaults are now 4.68%, 6.25%, 9.37% of physical memory.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While testing tight tcp_mem settings, I found tcp sessions could be
stuck because we do not allow even one skb to be received on them.

By allowing one skb to be received, we introduce fairness and
eventuallu force memory hogs to release their allocation.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Under memory pressure, tcp_sendmsg() can fail to queue a packet
while no packet is present in write queue. If we return -EAGAIN
with no packet in write queue, no ACK packet will ever come
to raise EPOLLOUT.

We need to allow one skb per TCP socket, and make sure that
tcp sockets can release their forward allocations under pressure.

This is a followup to commit 790ba456 ("tcp: set SOCK_NOSPACE
under memory pressure")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce an optimized version of sk_under_memory_pressure()
for TCP. Our intent is to use it in fast paths.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We plan to use sk_forced_wmem_schedule() in input path as well,
so make it non static and rename it.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sk_mem_reclaim_partial() goal is to ensure each socket has
one SK_MEM_QUANTUM forward allocation. This is needed both for
performance and better handling of memory pressure situations in
follow up patches.

SK_MEM_QUANTUM is currently a page, but might be reduced to 4096 bytes
as some arches have 64KB pages.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rollover can be enabled as flag or mode. Allocate state in both cases.
This solves a NULL pointer exception in fanout_demux_rollover on
referencing po->rollover if using mode rollover.

Also make sure that in rollover mode each silo is tried (contrary
to rollover flag, where the main socket is excluded after an initial
try_self).

Tested:
  Passes tools/testing/net/psock_fanout.c, which tests both modes and
  flag. My previous tests were limited to bench_rollover, which only
  stresses the flag. The test now completes safely. it still gives an
  error for mode rollover, because it does not expect the new headroom
  (ROOM_NORMAL) requirement. I will send a separate patch to the test.

Fixes: 0648ab70 ("packet: rollover prepare: per-socket state")
Signed-off-by: NWillem de Bruijn <willemb@google.com>

----

I should have run this test and caught this before submission, of
course. Apologies for the oversight.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

First one in __skb_checksum_validate_complete() fixes the following
(and other callers)

make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/tcp_ipv4.o
  CHECK   net/ipv4/tcp_ipv4.c
include/linux/skbuff.h:3052:24: warning: incorrect type in return expression (different base types)
include/linux/skbuff.h:3052:24:    expected restricted __sum16
include/linux/skbuff.h:3052:24:    got int

Second is fixing gso_make_checksum() :

  CHECK   net/ipv4/gre_offload.c
include/linux/skbuff.h:3360:14: warning: incorrect type in assignment (different base types)
include/linux/skbuff.h:3360:14:    expected unsigned short [unsigned] [usertype] csum
include/linux/skbuff.h:3360:14:    got restricted __sum16
include/linux/skbuff.h:3365:16: warning: incorrect type in return expression (different base types)
include/linux/skbuff.h:3365:16:    expected restricted __sum16
include/linux/skbuff.h:3365:16:    got unsigned short [unsigned] [usertype] csum

Fixes: 5a212329 ("net: Support for csum_bad in skbuff")
Fixes: 7e2b10c1 ("net: Support for multiple checksums with gso")
Signed-off-by: NEric Dumazet <edumazet@google.com>
CC: Tom Herbert <tom@herbertland.com>
Acked-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix verbose sparse errors :

make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/netfilter/ipt_SYNPROXY.o
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/ipip.o
  CHECK   net/ipv4/ipip.c
net/ipv4/ipip.c:254:27: warning: incorrect type in assignment (different base types)
net/ipv4/ipip.c:254:27:    expected restricted __be32 [addressable] [usertype] o_key
net/ipv4/ipip.c:254:27:    got restricted __be16 [addressable] [usertype] i_flags

Fixes: 3b7b514f ("ipip: fix a regression in ioctl")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/netfilter/nf_nat_l3proto_ipv4.o
  CHECK   net/ipv4/netfilter/nf_nat_l3proto_ipv4.c
include/net/checksum.h:125:64: warning: incorrect type in argument 2 (different base types)
include/net/checksum.h:125:64:    expected restricted __wsum [usertype] addend
include/net/checksum.h:125:64:    got restricted __be32 [usertype] from
include/net/checksum.h:125:71: warning: incorrect type in argument 2 (different base types)
include/net/checksum.h:125:71:    expected restricted __wsum [usertype] addend
include/net/checksum.h:125:71:    got restricted __be32 [usertype] to
include/net/checksum.h:125:64: warning: incorrect type in argument 2 (different base types)
include/net/checksum.h:125:64:    expected restricted __wsum [usertype] addend
include/net/checksum.h:125:64:    got restricted __be32 [usertype] from
include/net/checksum.h:125:71: warning: incorrect type in argument 2 (different base types)
include/net/checksum.h:125:71:    expected restricted __wsum [usertype] addend
include/net/checksum.h:125:71:    got restricted __be32 [usertype] to

Fixes: 4565af0d ("net: optimise csum_replace4()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It can be useful to debug the PHY state machine, add dynamic debug
prints of the old and new PHY devices state under a friendly format.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Once we get a neighbour through looking up arp cache or creating a
new one in rocker_port_ipv4_resolve(), the neighbour's refcount is
already taken. But as we don't put the refcount again after it's
used, this makes the neighbour entry leaked.
Suggested-by: NEric Dumazet <edumazet@google.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver updates 2015-05-12

The following series of patches includes functional updates and changes
to the driver.

- Add additional statistics to be collected and reported
- Use the netif_* functions for issuing some debug and informational
  driver messages
- Rx path SKB allocation cleanup/simplification
- Remove stand-alone phylib driver and incorporate function into the nic
  driver
- Simplify device tree support while maintaining backwards compatibility
- Fix the flow control negotiation logic to properly configure flow
  control
- Remove the checking and setting of the device dma_mask field

This patch series is based on net-next.

Changes in v2:
- Change from using the netif_msg_*/netdev_* combination for issuing
  messages to the more concise netif_*
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The underlying device support will set the device dma_mask pointer
if DMA is set up properly for the device.  Remove the check for and
assignment of dma_mask when it is null. Instead, just error out if
the dma_set_mask_and_coherent function fails because dma_mask is null.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The flow control negotiation logic is flawed and does not properly
advertise and process auto-negotiation of the flow control settings.
Update the flow control support to properly set the flow control
auto-negotiation settings and process the results approrpriately.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simplify the device tree support of the amd-xgbe driver by defining
the PHY-related resources within the ethernet device node. The support
provides backwards compatibility with the original way.

Update the driver version to 1.0.2.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The AMD XGBE device is intended to work with a specific integrated PHY
and that PHY is not meant to be a standalone PHY for use by other
devices. As such this patch removes the phylib driver and implements
the PHY support in the amd-xgbe driver (the majority of the logic from
the phylib driver is moved into the amd-xgbe driver).

Update the driver version to 1.0.1.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rework the SKB allocation so that all of the buffers of the first
descriptor are handled in the SKB allocation routine. After copying the
data in the header buffer (which can be just the header if split header
processing succeeded for header plus data if split header processing did
not succeed) into the SKB, check for remaining data in the receive
buffer. If there is data remaining in the receive buffer, add that as a
frag to the SKB. Once an SKB has been allocated, all other descriptors
are added as frags to the SKB.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the network interface message level settings for
determining whether to issue some of the driver messages. Make
use of the netif_* interface where appropriate.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add additional/extended statistics beyond what is provided by the
hardware to be reported via ethtool. The new stats focus on the
calls into ndo_start_xmit and the napi_poll routine.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Joachim Eastwood says:

====================
convert stmmac glue layers into platform drivers

This patch set aims to convert the current dwmac glue layers into
proper platform drivers as request by Arnd[1]. These changes start
from patch 3 and onwards.

Overview:
Platform driver functions like probe and remove are exported from
the stmmac platform and then used in subsequent glue later
conversions. The conversion involes adding the platform driver
boiler plate code and adding it to the build system. The last patch
removes the driver from the stmmac platform code thus making it into
a library for common platform driver functions.

The two first patches adds glue layer for my platform. I chose to
first add old style glue layer and then convert it. The churn this
creates is just 3 lines.

I would be very nice if people could test this patch set on their
respective platform. My testing has been limited to compiling and
testing on my (LPC18xx) platform. Thanks!

Next I will look into cleaning up the stmmac platform code.

[1] http://marc.info/?l=linux-arm-kernel&m=143059524606459&w=2
====================
Tested-by: NChen-Yu Tsai <wens@csie.org>
Tested-by: NDinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dwmac-generic replaces the driver inside the stmmac
platform code. This turns stmmac platform into a library
used by drivers for common platform driver functions.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert platform glue layer into a proper platform
driver and add it to the build system.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert platform glue layer into a proper platform
driver and add it to the build system.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert platform glue layer into a proper platform
driver and add it to the build system.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert platform glue layer into a proper platform
driver and add it to the build system.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert platform glue layer into a proper platform
driver and add it to the build system.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert platform glue layer into a proper platform
driver and add it to the build system.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>