提交 c1ce2f77 编写于 作者: L Lendacky, Thomas 提交者: David S. Miller

amd-xgbe: Fix flow control setting logic

The flow control negotiation logic is flawed and does not properly
advertise and process auto-negotiation of the flow control settings.
Update the flow control support to properly set the flow control
auto-negotiation settings and process the results approrpriately.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 34bfff40
......@@ -782,8 +782,6 @@ static int xgbe_phy_init(struct xgbe_prv_data *pdata)
{
pdata->phy_link = -1;
pdata->phy_speed = SPEED_UNKNOWN;
pdata->phy_tx_pause = pdata->tx_pause;
pdata->phy_rx_pause = pdata->rx_pause;
return pdata->phy_if.phy_reset(pdata);
}
......
......@@ -247,9 +247,9 @@ static void xgbe_get_pauseparam(struct net_device *netdev,
DBGPR("-->xgbe_get_pauseparam\n");
pause->autoneg = pdata->pause_autoneg;
pause->tx_pause = pdata->tx_pause;
pause->rx_pause = pdata->rx_pause;
pause->autoneg = pdata->phy.pause_autoneg;
pause->tx_pause = pdata->phy.tx_pause;
pause->rx_pause = pdata->phy.rx_pause;
DBGPR("<--xgbe_get_pauseparam\n");
}
......@@ -265,19 +265,24 @@ static int xgbe_set_pauseparam(struct net_device *netdev,
DBGPR(" autoneg = %d, tx_pause = %d, rx_pause = %d\n",
pause->autoneg, pause->tx_pause, pause->rx_pause);
pdata->pause_autoneg = pause->autoneg;
if (pause->autoneg) {
pdata->phy.advertising |= ADVERTISED_Pause;
pdata->phy.advertising |= ADVERTISED_Asym_Pause;
if (pause->autoneg && (pdata->phy.autoneg != AUTONEG_ENABLE))
return -EINVAL;
pdata->phy.pause_autoneg = pause->autoneg;
pdata->phy.tx_pause = pause->tx_pause;
pdata->phy.rx_pause = pause->rx_pause;
} else {
pdata->phy.advertising &= ~ADVERTISED_Pause;
pdata->phy.advertising &= ~ADVERTISED_Asym_Pause;
pdata->phy.advertising &= ~ADVERTISED_Pause;
pdata->phy.advertising &= ~ADVERTISED_Asym_Pause;
pdata->tx_pause = pause->tx_pause;
pdata->rx_pause = pause->rx_pause;
if (pause->rx_pause) {
pdata->phy.advertising |= ADVERTISED_Pause;
pdata->phy.advertising |= ADVERTISED_Asym_Pause;
}
if (pause->tx_pause)
pdata->phy.advertising ^= ADVERTISED_Asym_Pause;
if (netif_running(netdev))
ret = pdata->phy_if.phy_config_aneg(pdata);
......
......@@ -737,6 +737,18 @@ static void xgbe_an_init(struct xgbe_prv_data *pdata)
XMDIO_WRITE(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE, reg);
}
static const char *xgbe_phy_fc_string(struct xgbe_prv_data *pdata)
{
if (pdata->tx_pause && pdata->rx_pause)
return "rx/tx";
else if (pdata->rx_pause)
return "rx";
else if (pdata->tx_pause)
return "tx";
else
return "off";
}
static const char *xgbe_phy_speed_string(int speed)
{
switch (speed) {
......@@ -760,7 +772,7 @@ static void xgbe_phy_print_status(struct xgbe_prv_data *pdata)
"Link is Up - %s/%s - flow control %s\n",
xgbe_phy_speed_string(pdata->phy.speed),
pdata->phy.duplex == DUPLEX_FULL ? "Full" : "Half",
pdata->phy.pause ? "rx/tx" : "off");
xgbe_phy_fc_string(pdata));
else
netdev_info(pdata->netdev, "Link is Down\n");
}
......@@ -771,24 +783,18 @@ static void xgbe_phy_adjust_link(struct xgbe_prv_data *pdata)
if (pdata->phy.link) {
/* Flow control support */
if (pdata->pause_autoneg) {
if (pdata->phy.pause || pdata->phy.asym_pause) {
pdata->tx_pause = 1;
pdata->rx_pause = 1;
} else {
pdata->tx_pause = 0;
pdata->rx_pause = 0;
}
}
pdata->pause_autoneg = pdata->phy.pause_autoneg;
if (pdata->tx_pause != pdata->phy_tx_pause) {
if (pdata->tx_pause != pdata->phy.tx_pause) {
new_state = 1;
pdata->hw_if.config_tx_flow_control(pdata);
pdata->phy_tx_pause = pdata->tx_pause;
pdata->tx_pause = pdata->phy.tx_pause;
}
if (pdata->rx_pause != pdata->phy_rx_pause) {
if (pdata->rx_pause != pdata->phy.rx_pause) {
new_state = 1;
pdata->hw_if.config_rx_flow_control(pdata);
pdata->phy_rx_pause = pdata->rx_pause;
pdata->rx_pause = pdata->phy.rx_pause;
}
/* Speed support */
......@@ -835,9 +841,6 @@ static int xgbe_phy_config_fixed(struct xgbe_prv_data *pdata)
if (pdata->phy.duplex != DUPLEX_FULL)
return -EINVAL;
pdata->phy.pause = 0;
pdata->phy.asym_pause = 0;
return 0;
}
......@@ -933,8 +936,6 @@ static void xgbe_phy_status_force(struct xgbe_prv_data *pdata)
}
}
pdata->phy.duplex = DUPLEX_FULL;
pdata->phy.pause = 0;
pdata->phy.asym_pause = 0;
}
static void xgbe_phy_status_aneg(struct xgbe_prv_data *pdata)
......@@ -957,9 +958,21 @@ static void xgbe_phy_status_aneg(struct xgbe_prv_data *pdata)
if (lp_reg & 0x800)
pdata->phy.lp_advertising |= ADVERTISED_Asym_Pause;
ad_reg &= lp_reg;
pdata->phy.pause = (ad_reg & 0x400) ? 1 : 0;
pdata->phy.asym_pause = (ad_reg & 0x800) ? 1 : 0;
if (pdata->phy.pause_autoneg) {
/* Set flow control based on auto-negotiation result */
pdata->phy.tx_pause = 0;
pdata->phy.rx_pause = 0;
if (ad_reg & lp_reg & 0x400) {
pdata->phy.tx_pause = 1;
pdata->phy.rx_pause = 1;
} else if (ad_reg & lp_reg & 0x800) {
if (ad_reg & 0x400)
pdata->phy.rx_pause = 1;
else if (lp_reg & 0x400)
pdata->phy.tx_pause = 1;
}
}
/* Compare Advertisement and Link Partner register 2 */
ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
......@@ -1223,6 +1236,22 @@ static void xgbe_phy_init(struct xgbe_prv_data *pdata)
pdata->phy.link = 0;
pdata->phy.pause_autoneg = pdata->pause_autoneg;
pdata->phy.tx_pause = pdata->tx_pause;
pdata->phy.rx_pause = pdata->rx_pause;
/* Fix up Flow Control advertising */
pdata->phy.advertising &= ~ADVERTISED_Pause;
pdata->phy.advertising &= ~ADVERTISED_Asym_Pause;
if (pdata->rx_pause) {
pdata->phy.advertising |= ADVERTISED_Pause;
pdata->phy.advertising |= ADVERTISED_Asym_Pause;
}
if (pdata->tx_pause)
pdata->phy.advertising ^= ADVERTISED_Asym_Pause;
if (netif_msg_drv(pdata))
xgbe_dump_phy_registers(pdata);
}
......
......@@ -539,10 +539,12 @@ struct xgbe_phy {
int autoneg;
int speed;
int duplex;
int pause;
int asym_pause;
int link;
int pause_autoneg;
int tx_pause;
int rx_pause;
};
struct xgbe_mmc_stats {
......@@ -910,8 +912,6 @@ struct xgbe_prv_data {
phy_interface_t phy_mode;
int phy_link;
int phy_speed;
unsigned int phy_tx_pause;
unsigned int phy_rx_pause;
/* MDIO/PHY related settings */
struct xgbe_phy phy;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册