- 21 9月, 2009 2 次提交
-
-
Update the HKEY event driver to: 1. Handle better the second-gen firmware, which has no HKEY mask support but does report FN+F3, FN+F4 and FN+F12 without the need for NVRAM polling. a) always make the mask-related attributes available in sysfs; b) use DMI quirks to detect the second-gen firmware; c) properly report that FN+F3, FN+F4 and FN+F12 are enabled, and available even on mask-less second-gen firmware; 2. Decouple the issuing of hotkey events towards userspace from their reception from the firmware. ALSA mixer and brightness event reporting support will need this feature. 3. Clean up the mess in the hotkey driver a great deal. It is still very convoluted, and wants a full refactoring into a proper event API interface, but that is not going to happen today. 4. Fully reset firmware interface on resume (restore hotkey mask and status). 5. Stop losing polled events for no good reason when changing the mask and poll frequencies. We will still lose them when the hotkey_source_mask is changed, as well as any that happened between driver suspend and driver resume. The hotkey subdriver now has the notion of user-space-visible hotkey event mask, as well as of the set of "hotkey" events the driver needs (because brightness/volume change reports are not just keypress reports in most ThinkPad models). With this rewrite, the ABI level is bumped to 0x020500 should userspace need to know it is dealing with the updated hotkey subdriver. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
HKEY event 0x5010 is useless to us: old ThinkPads don't issue it. Newer ThinkPads won't issue it anymore. And all ThinkPads issue 0x1010 and 0x1011 events. Just silently drop it instead of sending it to userspace. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 19 9月, 2009 2 次提交
-
-
echo "reset" > /proc/acpi/ibm/hotkey should do something non-useless, so instead of setting it to Fn+F2, Fn+F3, Fn+F5, set it to hotkey_recommended_mask. It is not like it will survive for much longer, anyway. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Some analysis of the ACPI DSDTs shows that the HKEY pre-enabled mask is always 0x80c (FN+F3,FN+F4 and FN+F12), which are the hotkeys that the second gen of HKEY firmware supported (the first gen didn't report any hotkeys, the second reported these tree hotkeys but had no mask support, and the third added mask support). So, this is probably some sort of backwards compatibility with older versions of the IBM ThinkVantage suite. We have no use for that, and I know of exactly ZERO users of that attribute, anyway. Start the process of getting rid of it. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 02 8月, 2009 1 次提交
-
-
The standard ACPI dock driver can handle the hotplug bays and docks of the ThinkPads just fine (including batteries) as of 2.6.27, and the code in thinkpad-acpi for the dock and bay subdrivers is currently broken anyway... Userspace needs some love to support the two-stage ejection nicely, but it is simple enough to do through udev rules (you don't even need HAL) so this wouldn't justify fixing the dock and bay subdrivers, either. That leaves warm-swap bays (_EJ3) support for thinkpad-acpi, as well as support for the weird dock of the model 570, but since such support has never left the "experimental" stage, it is also not a strong enough reason to find a way to fix this code. Users of ThinkPads with warm-swap bays are urged to request that _EJ3 support be added to the regular ACPI dock driver, if such feature is indeed useful for them. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 18 6月, 2009 3 次提交
-
-
Support reading the tachometer of the auxiliary fan of a X60/X61. It was found out by sheer luck, that bit 0 of EC register 0x31 (formely HBRV) selects which fan is active for tachometer readings through EC 0x84/0x085: 0 for fan1, 1 for fan2. Many thanks to Christoph Kl??nter, to Whoopie, and to weasel, who helped confirm that behaviour. Fan control through EC HFSP applies to both fans equally, regardless of the state of bit 0 of EC 0x31. That matches the way the DSDT uses HFSP. In order to better support the secondary fan, export a second tachometer over hwmon, and add defensive measures to make sure we are reading the correct tachometer. Support for the second fan is whitelist-based, as I have not found anything obvious to look for in the DSDT to detect the presence of the second fan. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Forcing thinkpad-acpi to do EC-based brightness control (HBRV) on a X61 has very... interesting effects, instead of doing nothing (since it doesn't have EC-based backlight control), it causes "weirdness" in the fan tachometer readings, for example. This means the EC register that used to be HBRV has been reused by Lenovo for something else, but they didn't remove it from the DSDT. Make sure the documentation reflects this data, and forbid the user from forcing the driver to access HBRV on Lenovo ThinkPads. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Add support for extra LEDs on recent ThinkPads, and avoid registering with the led class the LEDs which are not available for a given ThinkPad model. All non-restricted LEDs are always available through the procfs interface, as the firmware doesn't care if an attempt is made to access an invalid LED. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 13 6月, 2009 1 次提交
-
-
由 Matt LaPlante 提交于
Fix various typos in documentation txts. Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 18 4月, 2009 1 次提交
-
-
Plenty of high-profile changes, so it deserves a new version number. Features added since 0.22: * Restrict unsafe LEDs * New race-less brightness control strategy for IBM ThinkPads * Disclose TGID of driver access from userspace (debug) * Warn when deprecated functions are used Other changes: * Better debug messages in some subdrivers * Removed "hotkey disable" support, since it breaks the driver * Dropped "ibm-acpi" alias Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 04 4月, 2009 8 次提交
-
-
Refactor and redesign the brightness control backend... In order to fix bugzilla #11750... Add a new brightness control mode: support direct NVRAM checkpointing of the backlight level (i.e. store directly to NVRAM without the need for UCMS calls), and use that together with the EC-based control. Disallow UCMS+EC, thus avoiding races with the SMM firmware. Switch the models that define HBRV (EC Brightness Value) in the DSDT to the new mode. These are: T40-T43, R50-R52, R50e, R51e, X31-X41. Change the default for all other IBM ThinkPads to UCMS-only. The Lenovo models already default to UCMS-only. Reported-by: NAlexey Fisher <bug-track@fisher-privat.net> Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Enhance debugging messages for the fan subdriver. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Enhance debugging messages for the hotkey subdriver. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Enhance debugging messages for all rfkill subdrivers in thinkpad-acpi. Also, log a warning if the deprecated sysfs attributes are in use. These attributes are going to be removed sometime in 2010. There is an user-visible side-effect: we now coalesce attempts to enable/disable bluetooth or WWAN in the procfs interface, instead of hammering the firmware with multiple requests. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Some of the ThinkPad LEDs indicate critical conditions that can cause data loss or cause hardware damage when ignored (e.g. force-ejecting a powered up bay; ignoring a failing battery, or empty battery; force- undocking with the dock buses still active, etc). On almost all ThinkPads, LED access is write-only, and the firmware usually does fire-and-forget signaling on them, so you effectively lose whatever message the firmware was trying to convey to the user when you override the LED state, without any chance to restore it. Restrict access to all LEDs that can convey important alarms, or that could mislead the user into incorrectly operating the hardware. This will make the Lenovo engineers less unhappy about the whole issue. Allow users that really want it to still control all LEDs, it is the unaware user that we have to worry about. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
The HKEY disable functionality basically cripples the entire event model of the ThinkPad firmware and of the thinkpad-acpi driver. Remove this functionality from the driver. HKEY must be enabled at all times while thinkpad-acpi is loaded, and disabled otherwise. For sysfs, according to the sysfs ABI and the thinkpad-acpi sysfs rules of engagement, we will just remove the attributes. This will be done in two stages: disable their function now, after two kernel releases, remove the attributes. For procfs, we call WARN(). If nothing triggers it, I will simply remove the enable/disable commands entirely in the future along with the sysfs attributes. I don't expect much, if any fallout from this. There really isn't any reason to mess with hotkey_enable or with the enable/disable commands to /proc/acpi/ibm/hotkey, and this has been true for years... Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Add a debug helper that discloses the TGID of the userspace task attempting to access the driver. This is highly useful when dealing with bug reports, since often the user has no idea that some userspace application is accessing thinkpad-acpi... Also add a helper to log warnings about sysfs attributes that are deprecated. Use the new helpers to issue deprecation warnings for bluetooth_enable and wwan_enabled, that have been deprecated for a while, now. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Some cleanups to the documentation of the driver. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 16 1月, 2009 3 次提交
-
-
It is about time to bump up the version. Features added since 0.21: fan suspend/resume support, preserve radio state across power off (for some radio types), built-in UWB radio rfkill support and thermal alarm events support. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Add rfkill support for USB UWB radio devices on very recent ThinkPad laptop models. The new subdriver is moslty a trimmed down copy of the wwan subdriver. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Update documentation to reflect the new location of the thinkpad-acpi driver. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 06 1月, 2009 1 次提交
-
-
由 Frederik Schwarzer 提交于
It is always "an" if there is a vowel _spoken_ (not written). So it is: "an hour" (spoken vowel) but "a uniform" (spoken 'j') Signed-off-by: NFrederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 29 8月, 2008 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
The WWAN radio control has been working well for over three years, and is no longer experimental. Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
- 21 7月, 2008 2 次提交
-
-
rfkill support deserves a new version checkpoint... Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
-
Add a read/write rfkill interface to the bluetooth radio switch on the bluetooth submodule, and one for the wireless wan radio switch to the wan submodule. Since rfkill does care for when a switch changes state, use WLSW notifications to also check if the WWAN or Bluetooth switches did not change state (due to them being slaves of WLSW in firmware/hardware, but that reality not being always properly exported by the thinkpad firmware). Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: John W. Linville <linville@tuxdriver.com>
-
- 12 6月, 2008 1 次提交
-
-
Rename SW_RADIO to SW_RFKILL_ALL in thinkpad-acpi code and docs, following 5adad013 "Input: rename SW_RADIO to SW_RFKILL_ALL". Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 29 4月, 2008 6 次提交
-
-
Full LED sysfs support, and the rest of the assorted minor fixes and enhancements are a good reason to checkpoint a new version... Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Change all occourences of the "led" word to full uppercase in user documentation. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Add a sysfs led class interface to the led subdriver. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Add a sysfs led class interface to the thinklight (light subdriver). Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Unfortunately, a lot of stuff in the kernel has size limitations, so "thinkpad-acpi" ends up eating up too much real estate. We were using "tpacpi" in symbols already, but this shorthand was not visible to userland. Document that the driver will use tpacpi as a short hand where necessary, and use it to name the kernel thread for NVRAM polling (now named "ktpacpi_nvramd"). Also, register a module alias with the shorthand. One can refer to the module using the shorthand name. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Lenovo ThinkPads with generic ACPI backlight level control can be easily set to react to keyboard brightness key presses in a more predictable way than what they do when in "DOS / bootloader" mode after Linux brings up the ACPI interface. The switch to the ACPI backlight mode in the firmware is designed to be safe to use only as an one way trapdoor. One is not to force the firmware to switch back to "DOS/bootloader" mode except by rebooting. The mode switch itself is performed by calling any of the ACPI _BCL methods at least once. When in ACPI mode, the backlight firmware just issues (standard) events for the brightness up/down hot key presses along with the non-standard HKEY events which thinkpad-acpi traps, and doesn't touch the hardware. thinkpad-acpi will: 1. Place the ThinkPad firmware in ACPI backlight control mode if one is available 2. Suppress HKEY backlight change notifications by default to avoid double-reporting when ACPI video is loaded when the ThinkPad is in ACPI backlight control mode 3. Urge the user to load the ACPI video driver The user is free to use either the ACPI video driver to get the brightness key events, or to override the thinkpad-acpi default hotkey mask to get them from thinkpad-acpi as well (this will result in duplicate events if ACPI video is loaded, so let's hope distros won't screw this up). Provided userspace is sane, all should work (and *keep* working), which is more that can be said about the non-ACPI mode of the new Lenovo ThinkPad BIOSes when coupled to current userspace and X.org drivers. Full guidelines for backlight hot key reporting and use of the thinkpad-acpi backlight interface have been added to the documentation. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 16 2月, 2008 5 次提交
-
-
A quick study of the 0x5009/0x500A HKEY event on the X61t DSDT revealed the existence of the EC HTAB register (EC 0x0f, bit 7), and a compare with the X41t DSDT shows that HKEY.MHKG can be used to verify if the ThinkPad is tablet-capable (MHKG present), and in tablet mode (bit 3 of MHKG return is set). Add an attribute to report this information, "hotkey_tablet_mode". This attribute has poll()/select() support, and can be used along with EV_SW SW_TABLET_MODE to hook userspace to tablet events. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Fixes some minor points in the radio switch code and docs. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Fix a few spelling errors, and also document the EV_SW events thinkpad-acpi can issue. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Issue EV_SW SW_TABLET_MODE events for HKEY events 0x5009 and 0x500A on the X41t/X60t/X61t. As usual, we suppress the HKEY events on the netlink interface to avoid sending duplicate events to userspace. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Fix a stray ibm-acpi that should have been replaced with thinkpad-acpi. Thanks to Damjan <gdamjan@mail.net.mk> for noticing this one. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 09 2月, 2008 1 次提交
-
-
由 Carlos Corbacho 提交于
Also update references to thinkpad-acpi.txt in Kconfig. Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> CC: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 02 2月, 2008 2 次提交
-
-
The major code reorganization and cleanups, and new HKEY events, plus poll()/select() support are good reasons to checkpoint a new version... Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Implement poll()/select() support through sysfs_notify() for some key attributes which userspace might want to poll() or select() on. In order to let userspace know poll()/select() support is available for an attribute, the thinkpad-acpi sysfs interface version is also bumped up. Further changes that add poll()/select() capabilities to any pre-existing attributes will also increment the sysfs interface version. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-