- 08 3月, 2014 17 次提交
-
-
由 hayeswang 提交于
move the tx_bottom() from delayed_work to tasklet. It makes the rx and tx balanced. If the device is in runtime suspend when getting the tx packet, wakeup the device before trasmitting. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Check tx agg list before spin lock to avoid doing spin lock every times. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Use spin_lock and spin_unlock in interrupt context. The ndo_start_xmit would not be called in interrupt context, so replace the relative spin_lock_irqsave and spin_unlock_irqrestore with spin_lock_bh and spin_unlock_bh. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e and i40evf. Most notable are: Joseph completes the implementation of the ethtool ntuple rule management interface by adding the get, update and delete interface reset. Akeem provides a fix to prevent a possible overflow due to multiplication of number and size by using kzalloc, so use kcalloc. Jesse provides an implementation for skb_set_hash() and adds the L4 type return when we know it is an L4 hash. He also adds a counter to statistics for Tx timeouts to help users. Lastly he provides a change to stay away from the cache line where the done bit may be getting written back for the transmit ring since the hardware may be writing the whole cache line for a partial update. Shannon cleans up code comments. Anjali removes a firmware workaround for newer firmware since the number of MSIx vectors are being reported correctly. v2: - dropped patch 01 of the series based on feedback from the author Joe Perches and Shannon Nelson. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs由 David S. Miller 提交于
David Howells says: ==================== net-next: AF_RXRPC fixes and development Here are some AF_RXRPC fixes: (1) Fix to remove incorrect checksum calculation made during recvmsg(). It's unnecessary to try to do this there since we check the checksum before reading the RxRPC header from the packet. (2) Fix to prevent the sending of an ABORT packet in response to another ABORT packet and inducing a storm. (3) Fix UDP MTU calculation from parsing ICMP_FRAG_NEEDED packets where we don't handle the ICMP packet not specifying an MTU size. And development patches: (4) Add sysctls for configuring RxRPC parameters, specifically various delays pertaining to ACK generation, the time before we resend a packet for which we don't receive an ACK, the maximum time a call is permitted to live and the amount of time transport, connection and dead call information is cached. (5) Improve ACK packet production by adjusting the handling of ACK_REQUESTED packets, ignoring the MORE_PACKETS flag, delaying the production of otherwise immediate ACK_IDLE packets and delaying all ACK_IDLE production (barring the call termination) to half a second. (6) Add more sysctl parameters to expose the Rx window size, the maximum packet size that we're willing to receive and the number of jumbo rxrpc packets we're willing to handle in a single UDP packet. (7) Request ACKs on alternate DATA packets so that the other side doesn't wait till we fill up the Tx window. (8) Use a RCU hash table to look up the rxrpc_call for an incoming packet rather than stepping through a hierarchy involving several spinlocks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Zoltan Kiss says: ==================== xen-netback: TX grant mapping with SKBTX_DEV_ZEROCOPY instead of copy A long known problem of the upstream netback implementation that on the TX path (from guest to Dom0) it copies the whole packet from guest memory into Dom0. That simply became a bottleneck with 10Gb NICs, and generally it's a huge perfomance penalty. The classic kernel version of netback used grant mapping, and to get notified when the page can be unmapped, it used page destructors. Unfortunately that destructor is not an upstreamable solution. Ian Campbell's skb fragment destructor patch series [1] tried to solve this problem, however it seems to be very invasive on the network stack's code, and therefore haven't progressed very well. This patch series use SKBTX_DEV_ZEROCOPY flags to tell the stack it needs to know when the skb is freed up. That is the way KVM solved the same problem, and based on my initial tests it can do the same for us. Avoiding the extra copy boosted up TX throughput from 6.8 Gbps to 7.9 (I used a slower AMD Interlagos box, both Dom0 and guest on upstream kernel, on the same NUMA node, running iperf 2.0.5, and the remote end was a bare metal box on the same 10Gb switch) Based on my investigations the packet get only copied if it is delivered to Dom0 IP stack through deliver_skb, which is due to this [2] patch. This affects DomU->Dom0 IP traffic and when Dom0 does routing/NAT for the guest. That's a bit unfortunate, but luckily it doesn't cause a major regression for this usecase. In the future we should try to eliminate that copy somehow. There are a few spinoff tasks which will be addressed in separate patches: - grant copy the header directly instead of map and memcpy. This should help us avoiding TLB flushing - use something else than ballooned pages - fix grant map to use page->index properly I've tried to broke it down to smaller patches, with mixed results, so I welcome suggestions on that part as well: 1: Use skb->cb to store pending_idx 2: Some refactoring 3: Change RX path for mapped SKB fragments (moved here to keep bisectability, review it after #4) 4: Introduce TX grant mapping 5: Remove old TX grant copy definitons and fix indentations 6: Add stat counters for zerocopy 7: Handle guests with too many frags 8: Timeout packets in RX path 9: Aggregate TX unmap operations v2: I've fixed some smaller things, see the individual patches. I've added a few new stat counters, and handling the important use case when an older guest sends lots of slots. Instead of delayed copy now we timeout packets on the RX path, based on the assumption that otherwise packets should get stucked anywhere else. Finally some unmap batching to avoid too much TLB flush v3: Apart from fixing a few things mentioned in responses the important change is the use the hypercall directly for grant [un]mapping, therefore we can avoid m2p override. v4: Now we are using a new grant mapping API to avoid m2p_override. The RX queue timeout logic changed also. v5: Only minor fixes based on Wei's comments v6: Important bugfixes for xenvif_poll exit path and zerocopy callback, see first 2 patches. Also rework of handling packets with too many slots, and reorder the series a bit. v7: Small fixes in comments/log messages/error paths, and merging the frag overflow stats patch into its parent. [1] http://lwn.net/Articles/491522/ [2] https://lkml.org/lkml/2012/7/20/363 ==================== Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zoltan Kiss 提交于
Unmapping causes TLB flushing, therefore we should make it in the largest possible batches. However we shouldn't starve the guest for too long. So if the guest has space for at least two big packets and we don't have at least a quarter ring to unmap, delay it for at most 1 milisec. Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zoltan Kiss 提交于
A malicious or buggy guest can leave its queue filled indefinitely, in which case qdisc start to queue packets for that VIF. If those packets came from an another guest, it can block its slots and prevent shutdown. To avoid that, we make sure the queue is drained in every 10 seconds. The QDisc queue in worst case takes 3 round to flush usually. Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zoltan Kiss 提交于
Xen network protocol had implicit dependency on MAX_SKB_FRAGS. Netback has to handle guests sending up to XEN_NETBK_LEGACY_SLOTS_MAX slots. To achieve that: - create a new skb - map the leftover slots to its frags (no linear buffer here!) - chain it to the previous through skb_shinfo(skb)->frag_list - map them - copy and coalesce the frags into a brand new one and send it to the stack - unmap the 2 old skb's pages It's also introduces new stat counters, which help determine how often the guest sends a packet with more than MAX_SKB_FRAGS frags. NOTE: if bisect brought you here, you should apply the series up until "xen-netback: Timeout packets in RX path", otherwise malicious guests can block other guests by not releasing their sent packets. Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zoltan Kiss 提交于
These counters help determine how often the buffers had to be copied. Also they help find out if packets are leaked, as if "sent != success + fail", there are probably packets never freed up properly. NOTE: if bisect brought you here, you should apply the series up until "xen-netback: Timeout packets in RX path", otherwise Windows guests can't work properly and malicious guests can block other guests by not releasing their sent packets. Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zoltan Kiss 提交于
These became obsolete with grant mapping. I've left intentionally the indentations in this way, to improve readability of previous patches. NOTE: if bisect brought you here, you should apply the series up until "xen-netback: Timeout packets in RX path", otherwise Windows guests can't work properly and malicious guests can block other guests by not releasing their sent packets. Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zoltan Kiss 提交于
This patch introduces grant mapping on netback TX path. It replaces grant copy operations, ditching grant copy coalescing along the way. Another solution for copy coalescing is introduced in "xen-netback: Handle guests with too many frags", older guests and Windows can broke before that patch applies. There is a callback (xenvif_zerocopy_callback) from core stack to release the slots back to the guests when kfree_skb or skb_orphan_frags called. It feeds a separate dealloc thread, as scheduling NAPI instance from there is inefficient, therefore we can't do dealloc from the instance. Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zoltan Kiss 提交于
RX path need to know if the SKB fragments are stored on pages from another domain. Logically this patch should be after introducing the grant mapping itself, as it makes sense only after that. But to keep bisectability, I moved it here. It shouldn't change any functionality here. xenvif_zerocopy_callback and ubuf_to_vif are just stubs here, they will be introduced properly later on. Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zoltan Kiss 提交于
This patch contains a few bits of refactoring before introducing the grant mapping changes: - introducing xenvif_tx_pending_slots_available(), as this is used several times, and will be used more often - rename the thread to vifX.Y-guest-rx, to signify it does RX work from the guest point of view Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zoltan Kiss 提交于
Storing the pending_idx at the first byte of the linear buffer never looked good, skb->cb is a more proper place for this. It also prevents the header to be directly grant copied there, and we don't have the pending_idx after we copied the header here, so it's time to change it. It also introduces helpers for the RX side Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
There is no reason to orphan skb in l2tp. This breaks things like per socket memory limits, TCP Small queues... Fix this before more people copy/paste it. This is very similar to commit 8f646c92 ("vxlan: keep original skb ownership") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Usage of skb->tstamp should remain private to TCP stack (only set on packets on write queue, not on cloned ones) Otherwise, packets given to loopback interface with a non null tstamp can confuse netif_rx() / net_timestamp_check() Other possibility would be to clear tstamp in loopback_xmit(), as done in skb_scrub_packet() Fixes: 740b0f18 ("tcp: switch rtt estimations to usec resolution") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2014 23 次提交
-
-
由 Catherine Sullivan 提交于
Bump i40e to 0.3.34 and i40evf to 0.9.14. Change-ID: I6b3fb8ccf55b128d2baa4bdc20d3911ec81d4a5b Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
We need to make sure that we stay away from the cache line where the DD bit (done) may be getting written back for the transmit ring since the hardware may be writing the whole cache line for a partial update. Change-ID: Id0b6dfc01f654def6a2a021af185803be1915d7e Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The driver needs to use the format that the current NVM uses when printing the version of the NVM. It should remain this way from now on forward. The driver was reporting when firmware was less than an expected version number, but this is not a requirement for the product and we print the firmware number at init and in ethtool -i output. Just remove the print. Change-ID: Ide0b856cd454ebf867610ef9a0d639bb358a4a60 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Neerav Parikh 提交于
This patch fixes the following static checker warning: drivers/net/ethernet/intel/i40e/i40e_dcb.c:342 i40e_lldp_to_dcb_config() warn: 'tlv' can't be NULL. Exit criteria from the while loop is encountering LLDP END LV or if the TLV length goes beyond the buffer length. Change-ID: I7548b16db90230ec2ba0fa791b0343ca8b7dd5bb Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NNeerav Parikh <Neerav.Parikh@intel.com> Acked-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NKevin Scott <kevin.c.scott@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Tested-By: Jack Morgan<jack.morgan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Remove a redundant filter addition to stop FW complaints about a redundant filter removal. Change-ID: I22bef6b682bd8d43432557e6e2b3e73ffb27b985 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The ethtool -S statistics should have a counter for tx timeouts in order to better help inform the masses. Change-ID: Ice4b20ed4a151509f366719ab105be49c9e7b2b4 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
The Number of MSIX vectors being reported is correct and hence we need a check to do the right thing for FWs before and after. Change-ID: I50902d1c848adcb960ea49ac73f7865ca871a1c3 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Lots of trivial changes to remove double spaces in function headers, unnecessary periods in short comments, and adjust the English usage here and there. No actual code was harmed in the making of this patch. Change-ID: I6e756c500756945e81a61ffb10221753eb7923ea Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NKevin Scott <kevin.c.scott@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Original comment from Tom Herbert <therbert@google.com> Drivers should call skb_set_hash to set the hash and its type in an skbuff. This patch builds upon Tom's original implementation and adds the L4 type return when we know it is an L4 hash. This requires use of the ptype decoder ring, so enable it. Change-ID: I2f9fa86d1a6add58cff13386f7f4238b1abcc468 CC: Tom Herbert <therbert@google.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Akeem G Abodunrin 提交于
To prevent the possibility of overflow due multiplication of number and size use kcalloc instead of kzalloc. Change-ID: Ibe4d81ed7d9738d3bbe66ee4844ff9be817e8080 Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Joseph Gasparakis 提交于
This patch completes implementation of the ethtool ntuple rule management interface. It adds the get, update and delete interface reset. Change-ID: Ida7f481d9ee4e405ed91340b858eabb18a52fdb5 Signed-off-by: NJoseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Set netdev->hw_features to enable the ndo_set_features netdev op. Change-Id: I5a086fbfa5a089de5adba2800c4d0b3a73747b11 Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 stephen hemminger 提交于
This is a fixup patch to resolve issues with const from my earlier patch. Make all the setter functions use const on input parameter. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
htb_dump() and htb_dump_class() do not strictly need to acquire qdisc lock to fetch qdisc and/or class parameters. We hold RTNL and no changes can occur. This reduces by 50% qdisc lock pressure while doing tc qdisc|class dump operations. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Alexander Aring says: ==================== 6lowpan: header cleanup this patch series fix a missing include of 6LoWPAN header and move it into the include/net directory. Since we did some code sharing with bluetooth 6LoWPAN the header turns into a generic header for 6LoWPAN. Instead to use a relative path in bluetooth 6LoWPAN we can now use include <net/6lowpan.h>. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
This header is used by bluetooth and ieee802154 branch. This patch move this header to the include/net directory to avoid a use of a relative path in include. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
The 6lowpan.h file contains some static inline function which use internal ipv6 api structs. Add a include of ipv6.h to be sure that it's known before. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
v2: remove unnecessary braces from all 'loopback' if-blocks (thx Sergei) Cc: sathya.perla@emulex.com Cc: subbu.seetharaman@emulex.com Cc: ajit.khaparde@emulex.com Cc: sergei.shtylyov@cogentembedded.com Signed-off-by: NIvan Vecera <ivecera@redhat.com> Acked-by: NAjit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fengguang Wu 提交于
Fix static error introduced by commit: b97b33a3 [645/653] net/mlx4_en: Verify mlx4_en module parameters sparse warnings: drivers/net/ethernet/mellanox/mlx4/en_main.c:335:6: sparse: symbol 'mlx4_en_verify_params' was not declared. Should it be static? CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Make local functions static (ie. only used in bond_options.c) Make bond options parsing tables constant. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
These functions are defined but no longer used. Compile tested only. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Reviewed-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Can be invoked from non-BH context. Based upon a patch by Eric Dumazet. Fixes: f19c29e3 ("tcp: snmp stats for Fast Open, SYN rtx, and data pkts") Reported-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Currently we're using GFP_KERNEL, however there are some path(s) where we can hold some spinlocks, specifically bond->curr_slave_lock: [ 4.722916] BUG: sleeping function called from invalid context at mm/slub.c:965 [ 4.724438] in_atomic(): 1, irqs_disabled(): 0, pid: 940, name: ifup-eth [ 4.726034] 5 locks held by ifup-eth/940: ...snip... [ 4.734646] #4: (&bond->curr_slave_lock){+...+.}, at: [<ffffffffa00badc6>] bond_enslave+0xda6/0xdd0 [bonding] ...snip... [ 4.759081] [<ffffffffa00b6f11>] bond_change_active_slave+0x191/0x3b0 [bonding] [ 4.760917] [<ffffffffa00b7227>] bond_select_active_slave+0xf7/0x1d0 [bonding] [ 4.762751] [<ffffffffa00badce>] bond_enslave+0xdae/0xdd0 [bonding] ...snip... As it's out of hot path and is a really rare event - change the gfp_t flags to GFP_ATOMIC to avoid sleeping under spinlock. v2: convert new notify calls to GFP_ATOMIC. CC: Thomas Glanzmann <thomas@glanzmann.de> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-