Last address for eMMa PrP is 0x80...0x83, so increase resource size
for eMMa to 256.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

This patch removes clk_register_clkdev() for the clocks that do not
have any users for non-DT boards and drivers.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

This patch adds missing clocks handling for the Memory Stick Host
Controller (MSHC) and Run-Time Integrity Checker (RTIC).
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

The esai_ahb clock is derived from ahb and used to provide ESAI the
capability of register accessing and FSYS clock source for I2S clocks
dividing.  The gate bits of this esai_ahb clock are shared with the
esai clock -- the baud clock, so we need to call imx_clk_gate2_shared()
for these two clocks.
Signed-off-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

It's quite common on i.MX that one gate bit controls the gating of
multiple clocks, i.e. this is a shared gate.  The patch adds the
function imx_clk_gate2_shared() for such case.  The clocks controlled
by the same gate bits should call this function with a pointer to a
single share count variable, so that the gate bits will only be
operated on the first enabling and the last disabling of these shared
gate clocks.

Thanks to Gerhard Sittig <gsi@denx.de> for this idea.
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

The imx specific clk_gate2 always has a valid lock with the clock.  So
the validation on gate->lock is not really needed.  Remove it.
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

The imx clk-gate2 driver implements an i.MX specific gate clock, which
has two bits controlling the gate states.  While this is a completely
separate gate driver from the common clk-gate one, it reuses the common
clk_gate structure.  Such reusing makes the extending of clk_gate2
clumsy.  Let's define struct clk_gate2 on our own to make the driver
independent of the common clk-gate one, and ease the clk_gate2 extending
at a later time.
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

CONFIG_OF is always selected for i.MX.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Compared to i.MX6 Quad/Dual the CCM_CCGR1 register in the i.MX6 Solo/DualLite
replaces the ecspi5 clock with the i2c4 clock.

Handle this difference using cpu_is_imx6dl().
Signed-off-by: NIain Paton <ipaton0@gmail.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Signed-off-by: NGilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

The device tree version for the babbage board (imx51-babbage.dtb) has a more
complete support than the board file version, so remove the board file source
code.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

CODA7 clock lookups are now defined in the device tree.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

- Remove unused <asm/mach/time.h> inclusion.
- Use predefined constant for CS8900A base address.
- Use DEFINE_RES_MEM() macro for NOR flash resource.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Instead of using init() and exit() hooks from framebuffer driver
to control power of LCD, introduce fixed voltage regulator for
this purpose.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

This patch replaces direct handling of peripheral bits with GPIOs by
using basic-mmio-gpio driver. As a result this change eliminate some
low-level code and removes custom io_map() from the board.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

To obtain exact pixel clocks, allow the DI clock selectors to influence
the PLLs that they are derived from.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Route the video PLL to the display interface clocks via the di_pre_sel
and di_sel muxes by default.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

Allows fror proper refcounting of the parent clocks
when enabling the clock output on CLK1/2 pads.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Reviewed-by: NMarek Vasut <marex@denx.de>
Acked-by: NRichard Zhu <r65037@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

The function v7_secondary_startup() works just fine in .text section, so
there is no need to have .text.head section annotation at all.  Drop it.
Suggested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Even when CONFIG_SUSPEND is enabled, it makes no sense to build
suspend-imx6.o if none of i.MX6 support is built in.  Let's build
suspend-imx6.o only when both CONFIG_SUSPEND and CONFIG_SOC_IMX6 are
enabled.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The pm-imx6q.c works for all i.MX6 SoCs, so let's rename it to pm-imx6.c
and have the build controlled by option CONFIG_SOC_IMX6.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The i.MX6 SoCs have something in common, so let's introduce
CONFIG_SOC_IMX6 for those stuff.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

When CONFIG_SUSPEND is not enabled, we should reasonably skip the call
to imx6q_suspend_init().
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Rename function imx6q_ocram_suspend_init() to imx6q_suspend_init() and
call suspend_set_ops() from there.  Now we get a centralized function
for suspend initialization.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

With v7_cpu_resume() being moved out of headsmp.S, all the remaining
code in the file is only needed by CONFIG_SMP build.  So we can control
the build of headsmp.o with only obj-$(CONFIG_SMP) now.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The suspend-imx6.S is introduced recently for suspend low-level assembly
code.  Since function v7_cpu_resume() is only used by suspend support,
it makes sense to move the function into suspend-imx6.S, and control the
build of the file with CONFIG_SUSPEND option.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

This is needed so that the IPU framebuffer scanout cannot be
starved by VPU or GPU activity.
Some boards like the SabreLite and SabreSD seem to set this in
the DCD already, but the documented register reset values do not
contain the necessary settings.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

SOC_IMX53 is a device-tree only platform, so we don't need
IMX_HAVE_PLATFORM_IMX2_WDT at all because this symbol only provides some code
to help register imx2-wdt platform devices.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Booting a mx6q system built with multi_v7_defconfig leads to the following
error messages on boot:

[    0.037758] imx6q_ocram_suspend_init: ocram pool unavailable!
[    0.037768] imx6_pm_common_init: failed to initialize ocram suspend -19!

This happens because CONFIG_SRAM is not selected by default in
multi_v7_defconfig.

Fix this by selecting CONFIG_SRAM at ARCH_MXC level, so that other SoCs could
use the SRAM driver as well.

As SRAM automatically selects GENERIC_ALLOCATOR, just drop it from the Kconfig
entry.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The fuse map of speed_grading[1:0] defines the max speed
of ARM, see below the definition:

2b'11: 1200000000Hz;
2b'10: 996000000Hz;
2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
2b'00: 792000000Hz;

Need to remove all illegal setpoints according to fuse
map.
Signed-off-by: NAnson Huang <b20788@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

As clk_pllv3_wait_lock will call usleep_range, and the clk APIs
mutex lock may be held when CPU entering idle, so calling clk
APIs must be avoided in cpu idle thread, this is to avoid reschedule
warning in cpu idle, just access register directly to achieve that.

bad: scheduling from the idle thread!
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc1+ #657
Backtrace:
[<80012188>] (dump_backtrace) from [<8001246c>] (show_stack+0x18/0x1c)
 r6:808c0038 r5:00000000 r4:808e5a1c r3:00000000
[<80012454>] (show_stack) from [<8064b2ec>] (dump_stack+0x84/0x9c)
[<8064b268>] (dump_stack) from [<80055ee0>] (dequeue_task_idle+0x20/0x30)
 r5:808bef40 r4:bf7dff40
[<80055ec0>] (dequeue_task_idle) from [<8004f028>] (dequeue_task+0x30/0x50)
 r4:bf7dff40 r3:80055ec0
[<8004eff8>] (dequeue_task) from [<800503c0>] (deactivate_task+0x30/0x34)
 r4:bf7dff40
[<80050390>] (deactivate_task) from [<8064d8e4>] (__schedule+0x2c8/0x5c0)
[<8064d61c>] (__schedule) from [<8064dc14>] (schedule+0x38/0x88)
 r10:80912964 r9:808c1e50 r8:808c0038 r7:808cbf30 r6:80e128ec r5:60000093
 r4:80912968
[<8064dbdc>] (schedule) from [<8064dfec>] (schedule_preempt_disabled+0x10/0x14)
[<8064dfdc>] (schedule_preempt_disabled) from [<8064ebc0>] (mutex_lock_nested+0x1c0/0x3c0)
[<8064ea00>] (mutex_lock_nested) from [<804ae71c>] (clk_prepare_lock+0x44/0xe4)
 r10:806554cc r9:bf7df1bc r8:808cf4f8 r7:808cf544 r6:bf7df1b8 r5:808c0010
 r4:80e69750
[<804ae6d8>] (clk_prepare_lock) from [<804af214>] (clk_get_rate+0x14/0x64)
 r6:bf7df1b8 r5:00000002 r4:bf017000 r3:80922ad0
[<804af200>] (clk_get_rate) from [<80025d30>] (imx6sl_set_wait_clk+0x18/0x20)
 r5:00000002 r4:00000001
[<80025d18>] (imx6sl_set_wait_clk) from [<80023454>] (imx6sl_enter_wait+0x20/0x48)
[<80023434>] (imx6sl_enter_wait) from [<80477c24>] (cpuidle_enter_state+0x44/0xfc)
 r4:3c386e48 r3:80023434
[<80477be0>] (cpuidle_enter_state) from [<80477dd8>] (cpuidle_idle_call+0xfc/0x160)
 r8:808cf4f8 r7:00000001 r6:80e69534 r5:00000000 r4:bf7df1b8
[<80477cdc>] (cpuidle_idle_call) from [<8000f61c>] (arch_cpu_idle+0x10/0x50)
 r9:808c0000 r8:00000000 r7:80921a89 r6:808c8938 r5:808c899c r4:808c0000
[<8000f60c>] (arch_cpu_idle) from [<8006fa94>] (cpu_startup_entry+0x108/0x160)
[<8006f98c>] (cpu_startup_entry) from [<806452ac>] (rest_init+0xb4/0xdc)
 r7:808afae0
[<806451f8>] (rest_init) from [<8086fb58>] (start_kernel+0x328/0x38c)
 r6:ffffffff r5:808c8880 r4:808c8a30
[<8086f830>] (start_kernel) from [<80008074>] (0x80008074)
Signed-off-by: NAnson Huang <b20788@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

On imx6qdl, the ENET RMII and PTP clock can come from either internal
ANATOP/CCM or external clock source through pad GPIO_16.  But in case
of the external clock source, bit IOMUXC_GPR1[21] needs to be cleared.

The patch adds the support for systems that use an external clock source
and distinguishes above two cases by checking if the PTP clock specified
in device tree is the one coming from the internal ANATOP/CCM.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Since commit (a94f8ecb ARM: imx6q: remove board specific CLKO setup),
a number of clk lookups in imx6q clock driver is no longer needed.
Let's remove them.

The cpu0 lookup is also removed since we are now running imx6 cpufreq
driver and looking up clocks from device tree.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The imx can support timer-based delays, so implement this.
Skips past jiffy calibration.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

IPG, ARM and MMDC's clock should be enabled during kernel boot up,
so we need to maintain their usecount, otherwise, they may be
disabled unexpectedly if their children's clock are turned off, and
caused their parent PLLs also get disabled, which is incorrect.
Signed-off-by: NAnson Huang <b20788@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

i.MX6SL's suspend in ocram function is derived from i.MX6Q,
it can lower the DDR IO power from ~10mA@1.2V to ~1mA@1.2V,
measured on i.MX6SL EVK board, SH5.
Signed-off-by: NAnson Huang <b20788@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

i.MX6DL's suspend in ocram function is derived from i.MX6Q,
it can lower the DDR IO power from ~26mA@1.5V to ~15mA@1.5V,
measured on i.MX6DL SabreSD board, R25.
Signed-off-by: NAnson Huang <b20788@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

When system enter suspend, we can set the DDR IO to
high-Z state to save DDR IOs' power consumption, this
operation can save many power(from ~26mA@1.5V to ~15mA@1.5V,
measured on i.MX6Q SabreSD board, R25) of DDR IOs. To
achieve that, we need to copy the suspend code to ocram
and run the low level hardware related code(set DDR IOs
to high-Z state) in ocram.

If there is no ocram space available, then system will
still do suspend in external DDR, hence no DDR IOs will
be set to high-Z.

The OCRAM usage layout is as below,

ocram suspend region(4K currently):
======================== high address ======================
                              .
                              .
                              .
                              ^
                              ^
                              ^
                      imx6_suspend code
             PM_INFO structure(imx6_cpu_pm_info)
======================== low address =======================
Reviewed-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NAnson Huang <b20788@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

As the i.MX pwm driver is devicetree only, remove the platform
support for this device.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

There should be no duplicate const specifiers for those static
constant character string arrays defined for clock mux options.
Also, the arrays are only taken as the 5th argument for the
imx_clk_mux() function, which is in the type of 'const char
**parents'.  So, let's remove the 2nd const specifier right
after 'char'.

This patch fixes these sparse warnings:
arch/arm/mach-imx/clk-vf610.c:66:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:67:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:68:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:69:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:70:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:71:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:72:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:73:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:74:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:75:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:76:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:77:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:78:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:79:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:80:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:81:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:83:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:84:25: warning: duplicate const
Signed-off-by: NLiu Ying <Ying.Liu@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>