Add a stat file to monitor the ioc_gq stat.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Currently in blk_throtl_bio(), if one bio exceeds its throtl_grp's bps
or iops limit, this bio will be queued throtl_grp's throtl_service_queue,
then obviously mm subsys will submit more pages, even underlying device
can not handle these io requests, also this will make large amount of pages
entering writeback prematurely, later if some process writes some of these
pages, it will wait for long time.

I have done some tests: one process does buffered writes on a 1GB file,
and make this process's blkcg max bps limit be 10MB/s, I observe this:
	#cat /proc/meminfo  | grep -i back
	Writeback:        900024 kB
	WritebackTmp:          0 kB

I think this Writeback value is just too big, indeed many bios have been
queued in throtl_grp's throtl_service_queue, if one process try to write
the last bio's page in this queue, it will call wait_on_page_writeback(page),
which must wait the previous bios to finish and will take long time, we
have also see 120s hung task warning in our server.

 INFO: task kworker/u128:0:30072 blocked for more than 120 seconds.
       Tainted: G            E 4.9.147-013.ali3000_015_test.alios7.x86_64 #1
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 kworker/u128:0  D    0 30072      2 0x00000000
 Workqueue: writeback wb_workfn (flush-8:16)
  ffff882ddd066b40 0000000000000000 ffff882e5cad3400 ffff882fbe959e80
  ffff882fa50b1a00 ffffc9003a5a3768 ffffffff8173325d ffffc9003a5a3780
  00ff882e5cad3400 ffff882fbe959e80 ffffffff81360b49 ffff882e5cad3400
 Call Trace:
  [<ffffffff8173325d>] ? __schedule+0x23d/0x6d0
  [<ffffffff81360b49>] ? alloc_request_struct+0x19/0x20
  [<ffffffff81733726>] schedule+0x36/0x80
  [<ffffffff81736c56>] schedule_timeout+0x206/0x4b0
  [<ffffffff81036c69>] ? sched_clock+0x9/0x10
  [<ffffffff81363073>] ? get_request+0x403/0x810
  [<ffffffff8110ca10>] ? ktime_get+0x40/0xb0
  [<ffffffff81732f8a>] io_schedule_timeout+0xda/0x170
  [<ffffffff81733f90>] ? bit_wait+0x60/0x60
  [<ffffffff81733fab>] bit_wait_io+0x1b/0x60
  [<ffffffff81733b28>] __wait_on_bit+0x58/0x90
  [<ffffffff811b0d91>] ? find_get_pages_tag+0x161/0x2e0
  [<ffffffff811aff62>] wait_on_page_bit+0x82/0xa0
  [<ffffffff810d47f0>] ? wake_atomic_t_function+0x60/0x60
  [<ffffffffa02fc181>] mpage_prepare_extent_to_map+0x2d1/0x310 [ext4]
  [<ffffffff8121ff65>] ? kmem_cache_alloc+0x185/0x1a0
  [<ffffffffa0305a2f>] ? ext4_init_io_end+0x1f/0x40 [ext4]
  [<ffffffffa0300294>] ext4_writepages+0x404/0xef0 [ext4]
  [<ffffffff81508c64>] ? scsi_init_io+0x44/0x200
  [<ffffffff81398a0f>] ? fprop_fraction_percpu+0x2f/0x80
  [<ffffffff811c139e>] do_writepages+0x1e/0x30
  [<ffffffff8127c0f5>] __writeback_single_inode+0x45/0x320
  [<ffffffff8127c942>] writeback_sb_inodes+0x272/0x600
  [<ffffffff8127cf6b>] wb_writeback+0x10b/0x300
  [<ffffffff8127d884>] wb_workfn+0xb4/0x380
  [<ffffffff810b85e9>] ? try_to_wake_up+0x59/0x3e0
  [<ffffffff810a5759>] process_one_work+0x189/0x420
  [<ffffffff810a5a3e>] worker_thread+0x4e/0x4b0
  [<ffffffff810a59f0>] ? process_one_work+0x420/0x420
  [<ffffffff810ac026>] kthread+0xe6/0x100
  [<ffffffff810abf40>] ? kthread_park+0x60/0x60
  [<ffffffff81738499>] ret_from_fork+0x39/0x50

To fix this issue, we can simply limit throtl_service_queue's max queued
bios, currently we limit it to throtl_grp's bps_limit or iops limit, if it
still exteeds, we just sleep for a while.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NLiu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Now we have counters for wait_time and service_time, but no completed
ios, so the average latency can not be measured.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

This patch does the code cleanup because the seq_show handlers for tg
counters are the same. No functional changes.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Add 2 interfaces to stat io throttle information:
  blkio.throttle.total_io_queued
  blkio.throttle.total_bytes_queued

These interfaces are used for monitoring throttled io/bytes and
analyzing if delay has relation with io throttle.
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

io throtl stats will blkg_get at the beginning of throttle and then
blkg_put at the new introduced bi_tg_end_io. This will cause blkg to be
freed if end_io is called twice like dm-thin, which will save origin
end_io first, and call its overwrite end_io and then the saved end_io.
After that, access blkg is invalid and finally BUG:

[ 4417.235048] BUG: unable to handle kernel NULL pointer dereference at 00000000000001e0
[ 4417.236475] IP: [<ffffffff812e7c71>] throtl_update_dispatch_stats+0x21/0xb0
[ 4417.237865] PGD 98395067 PUD 362e1067 PMD 0
[ 4417.239232] Oops: 0000 [#1] SMP
......
[ 4417.274070] Call Trace:
[ 4417.275407]  [<ffffffff812ea93d>] blk_throtl_bio+0xfd/0x630
[ 4417.276760]  [<ffffffff810b3613>] ? wake_up_process+0x23/0x40
[ 4417.278079]  [<ffffffff81094c04>] ? wake_up_worker+0x24/0x30
[ 4417.279387]  [<ffffffff81095772>] ? insert_work+0x62/0xa0
[ 4417.280697]  [<ffffffff8116c2c7>] ? mempool_free_slab+0x17/0x20
[ 4417.282019]  [<ffffffff8116c6c9>] ? mempool_free+0x49/0x90
[ 4417.283326]  [<ffffffff812c9acf>] generic_make_request_checks+0x16f/0x360
[ 4417.284637]  [<ffffffffa0340d97>] ? thin_map+0x227/0x2c0 [dm_thin_pool]
[ 4417.285951]  [<ffffffff812c9ce7>] generic_make_request+0x27/0x130
[ 4417.287240]  [<ffffffffa0230b3d>] __map_bio+0xad/0x100 [dm_mod]
[ 4417.288503]  [<ffffffffa023257e>] __clone_and_map_data_bio+0x15e/0x240 [dm_mod]
[ 4417.289778]  [<ffffffffa02329ea>] __split_and_process_bio+0x38a/0x500 [dm_mod]
[ 4417.291062]  [<ffffffffa0232c91>] dm_make_request+0x131/0x1a0 [dm_mod]
[ 4417.292344]  [<ffffffff812c9da2>] generic_make_request+0xe2/0x130
[ 4417.293626]  [<ffffffff812c9e61>] submit_bio+0x71/0x150
[ 4417.294909]  [<ffffffff8121ab1d>] ? bio_alloc_bioset+0x20d/0x360
[ 4417.296195]  [<ffffffff81215acb>] _submit_bh+0x14b/0x220
[ 4417.297484]  [<ffffffff81215bb0>] submit_bh+0x10/0x20
[ 4417.298744]  [<ffffffffa016d8d8>] jbd2_journal_commit_transaction+0x6c8/0x19a0 [jbd2]
[ 4417.300014]  [<ffffffff810135b8>] ? __switch_to+0xf8/0x4c0
[ 4417.301268]  [<ffffffffa01731e9>] kjournald2+0xc9/0x270 [jbd2]
[ 4417.302524]  [<ffffffff810a0fd0>] ? wake_up_atomic_t+0x30/0x30
[ 4417.303753]  [<ffffffffa0173120>] ? commit_timeout+0x10/0x10 [jbd2]
[ 4417.304950]  [<ffffffff8109ffef>] kthread+0xcf/0xe0
[ 4417.306107]  [<ffffffff8109ff20>] ? kthread_create_on_node+0x140/0x140
[ 4417.307255]  [<ffffffff81647f18>] ret_from_fork+0x58/0x90
[ 4417.308349]  [<ffffffff8109ff20>] ? kthread_create_on_node+0x140/0x140
......

Now we introduce a new bio flag BIO_THROTL_STATED to make sure
blkg_get/put only get called once for the same bio.
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Add blkio.throttle.io_service_time and blkio.throttle.io_wait_time to
get per-cgroup io delay statistics.
io_service_time represents the time spent after io throttle to io
completion, while io_wait_time represents the time spent on throttle
queue.
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Indeed tool iostat's await is not good enough, which is somewhat sketchy
and could not show request's latency on device driver's side.

Here we add a new counter to track io request's d2c time, also with this
patch, we can extend iostat to show this value easily.

Note:
I had checked how iostat is implemented, it just reads fields it needs,
so iostat won't be affected by this change, so does tsar.
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 79d08f89bb1b5c2c1ff90d9bb95497ab9e8aa7e0 upstream

'bio->bi_iter.bi_size' is 'unsigned int', which at most hold 4G - 1
bytes.

Before 07173c3ec276 ("block: enable multipage bvecs"), one bio can
include very limited pages, and usually at most 256, so the fs bio
size won't be bigger than 1M bytes most of times.

Since we support multi-page bvec, in theory one fs bio really can
be added > 1M pages, especially in case of hugepage, or big writeback
with too many dirty pages. Then there is chance in which .bi_size
is overflowed.

Fixes this issue by using bio_full() to check if the added segment may
overflow .bi_size.
Signed-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Cc: Liu Yiding <liuyd.fnst@cn.fujitsu.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 07173c3ec276 ("block: enable multipage bvecs")
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 8b37bc277fb459fa100808880a9d4e0641fff444 upstream.

There is a bug that checking the same active_list over and over again
in iocg_activate(). The intention of the code was checking whether all
the ancestors and self have already been activated. So fix it.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 41591a51f00d2dc7bb9dc6e9bedf56c5cf6f2392 upstream.

This code causes a static analysis warning:

    block/blk-iocost.c:2113 ioc_weight_write() error: double lock 'irq'

We disable IRQs in blkg_conf_prep() and re-enable them in
blkg_conf_finish().  IRQ disable/enable should not be nested because
that means the IRQs will be enabled at the first unlock instead of the
second one.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Function ioc_rqos_throttle() may called inside queue_lock.
We should unlock the queue_lock before entering sleep.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 9d179b865449b351ad5cb76dbea480c9170d4a27 upstream.

blkcg_activate_policy() has the following bugs.

* cf09a8ee19ad ("blkcg: pass @q and @blkcg into
  blkcg_pol_alloc_pd_fn()") added @blkcg to ->pd_alloc_fn(); however,
  blkcg_activate_policy() ends up using pd's allocated for the root
  blkcg for all preallocations, so ->pd_init_fn() for non-root blkcgs
  can be passed in pd's which are allocated for the root blkcg.

  For blk-iocost, this means that ->pd_init_fn() can write beyond the
  end of the allocated object as it determines the length of the flex
  array at the end based on the blkcg's nesting level.

* Each pd is initialized as they get allocated.  If alloc fails, the
  policy will get freed with pd's initialized on it.

* After the above partial failure, the partial pds are not freed.

This patch fixes all the above issues by

* Restructuring blkcg_activate_policy() so that alloc and init passes
  are separate.  Init takes place only after all allocs succeeded and
  on failure all allocated pds are freed.

* Unifying and fixing the cleanup of the remaining pd_prealloc.
Signed-off-by: NTejun Heo <tj@kernel.org>
Fixes: cf09a8ee19ad ("blkcg: pass @q and @blkcg into blkcg_pol_alloc_pd_fn()")
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 71c814077de60b2e7415dac6f5c4e98f59d521fd upstream.

When blkcg_activate_policy() is creating blkg_policy_data for existing
blkgs, it did in the wrong order - descendants first.  Fix it.  None
of the existing controllers seem affected by this.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

When the QoS targets are met and nothing is being throttled, there's
no way to tell how saturated the underlying device is - it could be
almost entirely idle, at the cusp of saturation or anywhere inbetween.
Given that there's no information, it's best to keep vrate as-is in
this state.  Before 7cd806a9a953 ("iocost: improve nr_lagging
handling"), this was the case - if the device isn't missing QoS
targets and nothing is being throttled, busy_level was reset to zero.

While fixing nr_lagging handling, 7cd806a9a953 ("iocost: improve
nr_lagging handling") broke this.  Now, while the device is hitting
QoS targets and nothing is being throttled, vrate keeps getting
adjusted according to the existing busy_level.

This led to vrate keeping climing till it hits max when there's an IO
issuer with limited request concurrency if the vrate started low.
vrate starts getting adjusted upwards until the issuer can issue IOs
w/o being throttled.  From then on, QoS targets keeps getting met and
nothing on the system needs throttling and vrate keeps getting
increased due to the existing busy_level.

This patch makes the following changes to the busy_level logic.

* Reset busy_level if nr_shortages is zero to avoid the above
  scenario.

* Make non-zero nr_lagging block lowering nr_level but still clear
  positive busy_level if there's clear non-saturation signal - QoS
  targets are met and nr_shortages is non-zero.  nr_lagging's role is
  preventing adjusting vrate upwards while there are long-running
  commands and it shouldn't keep busy_level positive while there's
  clear non-saturation signal.

* Restructure code for clarity and add comments.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NAndy Newell <newella@fb.com>
Fixes: 7cd806a9a953 ("iocost: improve nr_lagging handling")
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7afcccafa59fb63b58f863a6c5e603a34625955b upstream.

The default hard disk param sets latency targets at 50ms.  As the
default target percentiles are zero, these don't directly regulate
vrate; however, they're still used to calculate the period length -
100ms in this case.

This is excessively low.  A SATA drive with QD32 saturated with random
IOs can easily reach avg completion latency of several hundred msecs.
A period duration which is substantially lower than avg completion
latency can lead to wildly fluctuating vrate.

Let's bump up the default latency targets to 250ms so that the period
duration is sufficiently long.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7cd806a9a953f234b9865c30028f47fd738ce375 upstream.

Some IOs may span multiple periods.  As latencies are collected on
completion, the inbetween periods won't register them and may
incorrectly decide to increase vrate.  nr_lagging tracks these IOs to
avoid those situations.  Currently, whenever there are IOs which are
spanning from the previous period, busy_level is reset to 0 if
negative thus suppressing vrate increase.

This has the following two problems.

* When latency target percentiles aren't set, vrate adjustment should
  only be governed by queue depth depletion; however, the current code
  keeps nr_lagging active which pulls in latency results and can keep
  down vrate unexpectedly.

* When lagging condition is detected, it resets the entire negative
  busy_level.  This turned out to be way too aggressive on some
  devices which sometimes experience extended latencies on a small
  subset of commands.  In addition, a lagging IO will be accounted as
  latency target miss on completion anyway and resetting busy_level
  amplifies its impact unnecessarily.

This patch fixes the above two problems by disabling nr_lagging
counting when latency target percentiles aren't set and blocking vrate
increases when there are lagging IOs while leaving busy_level as-is.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 25d41e4aadb0788b4fae8a8fca90f437b9ebd727 upstream.

vrate_adj tracepoint traces vrate changes; however, it does so only
when busy_level is non-zero.  busy_level turning to zero can sometimes
be as interesting an event.  This patch also enables vrate_adj
tracepoint on other vrate related events - busy_level changes and
non-zero nr_lagging.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Bios are not associated with blkg before entering iocost controller.
do it in ioc_rqos_throttle() as well as ioc_rqos_merge().

Considering that there are so many chances to create blkg before
ioc_rqos_merge(), we just lookup the blkg here and if blkg are not
exist, just return rather than create it.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

To support cgroup v1.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7c1ee704a1d6450f92372d57f5b76a458b51c1d4 upstream.

Report debt and rename del_ms row to delay for consistency.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit e1518f63f246831af222758ead022cd40e79fab8 upstream.

Merges have the same problem that forced-bios had which is fixed by
the previous patch.  The cost of a merge is calculated at the time of
issue and force-advances vtime into the future.  Until global vtime
catches up, how the cgroup's hweight changes in the meantime doesn't
matter and it often leads to situations where the cost is calculated
at one hweight and paid at a very different one.  See the previous
patch for more details.

Fix it by never advancing vtime into the future for merges.  If budget
is available, vtime is advanced.  Otherwise, the cost is charged as
debt.

This brings merge cost handling in line with issue cost handling in
ioc_rqos_throttle().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 36a524814ff3e5d5385f42d30152fe8c5e1fd2c1 upstream.

Currently, when a bio needs to be force-charged and there isn't enough
budget, vtime is simply pushed into the future.  This means that the
cost of the whole bio is scaled using the current hweight and then
charged immediately.  Until the global vtime advances beyond this
future vtime, the cgroup won't be allowed to issue normal IOs.

This is incorrect and can lead to, for example, exploding vrate or
extended stalls if vrate range is constrained.  Consider the following
scenario.

1. A cgroup with a very low hweight runs out of budget.

2. A storm of swap-out happens on it.  All of them are scaled
   according to the current low hweight and charged to vtime pushing
   it to a far future.

3. All other cgroups go idle and now the above cgroup has access to
   the whole device.  However, because vtime is already wound using
   the past low hweight, what its current hweight is doesn't matter
   until global vtime catches up to the local vtime.

4. As a result, either vrate gets ramped up extremely or the IOs stall
   while the underlying device is idle.

This is because the hweight the overage is calculated at is different
from the hweight that it's being paid at.

Fix it by remembering the overage in absoulte vtime and continuously
paying with the actual budget according to the current hweight at each
period.

Note that non-forced bios which wait already remembers the cost in
absolute vtime.  This brings forced-bio accounting in line.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit e036c4cabaa8d24375262ced3a191819a8077b74 upstream.

ioc_pd_free() first cancels the hrtimers and then deactivates the
iocg.  However, the iocg timer can run inbetween and reschedule the
hrtimers which will end up running after the iocg is freed leading to
crashes like the following.

  general protection fault: 0000 [#1] SMP
  ...
  RIP: 0010:iocg_kick_delay+0xbe/0x1b0
  RSP: 0018:ffffc90003598ea0 EFLAGS: 00010046
  RAX: 1cee00fd69512b54 RBX: ffff8881bba48400 RCX: 00000000000003e8
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881bba48400
  RBP: 0000000000004e20 R08: 0000000000000002 R09: 00000000000003e8
  R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90003598ef0
  R13: 00979f3810ad461f R14: ffff8881bba4b400 R15: 25439f950d26e1d1
  FS:  0000000000000000(0000) GS:ffff88885f800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f64328c7e40 CR3: 0000000002409005 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   <IRQ>
   iocg_delay_timer_fn+0x3d/0x60
   __hrtimer_run_queues+0xfe/0x270
   hrtimer_interrupt+0xf4/0x210
   smp_apic_timer_interrupt+0x5e/0x120
   apic_timer_interrupt+0xf/0x20
   </IRQ>

Fix it by canceling hrtimers after deactivating the iocg.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Reported-by: NDave Jones <davej@codemonkey.org.uk>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit e916ad29d96485e5aa3d3237bfeab1522c713d5e upstream.

ioc_cpd_alloc() forgot to check NULL return from kzalloc().  Add it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 3532e7227243beb0b782266dc05c40b6184ad051 upstream.

blk_iocost_init() forgot to free its percpu stat on the error path.
Fix it.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Reported-by: NHillf Danton <hdanton@sina.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 8504dea783b044cab620acbaef87b86ee84646fe upstream.

Add a script which can be used to generate device-specific iocost
linear model coefficients.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 6954ff185ee0811cdd2e0f388ff4dd7df17f11af upstream.

Instead of mucking with debugfs and ->pd_stat(), add drgn based
monitoring script.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7caa47151ab2e644dd221f741ec7578d9532c9a3 upstream.

This patchset implements IO cost model based work-conserving
proportional controller.

While io.latency provides the capability to comprehensively prioritize
and protect IOs depending on the cgroups, its protection is binary -
the lowest latency target cgroup which is suffering is protected at
the cost of all others.  In many use cases including stacking multiple
workload containers in a single system, it's necessary to distribute
IO capacity with better granularity.

One challenge of controlling IO resources is the lack of trivially
observable cost metric.  The most common metrics - bandwidth and iops
- can be off by orders of magnitude depending on the device type and
IO pattern.  However, the cost isn't a complete mystery.  Given
several key attributes, we can make fairly reliable predictions on how
expensive a given stream of IOs would be, at least compared to other
IO patterns.

The function which determines the cost of a given IO is the IO cost
model for the device.  This controller distributes IO capacity based
on the costs estimated by such model.  The more accurate the cost
model the better but the controller adapts based on IO completion
latency and as long as the relative costs across differents IO
patterns are consistent and sensible, it'll adapt to the actual
performance of the device.

Currently, the only implemented cost model is a simple linear one with
a few sets of default parameters for different classes of device.
This covers most common devices reasonably well.  All the
infrastructure to tune and add different cost models is already in
place and a later patch will also allow using bpf progs for cost
models.

Please see the top comment in blk-iocost.c and documentation for
more details.

v2: Rebased on top of RQ_ALLOC_TIME changes and folded in Rik's fix
    for a divide-by-zero bug in current_hweight() triggered by zero
    inuse_sum.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
[Joseph: fix confilcts with ioc_rqos_throttle()]
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 6f816b4b746c2241540e537682d30d8e9997d674 upstream.

There are currently two start time timestamps - start_time_ns and
io_start_time_ns.  The former marks the request allocation and and the
second issue-to-device time.  The planned io.weight controller needs
to measure the total time bios take to execute after it leaves rq_qos
including the time spent waiting for request to become available,
which can easily dominate on saturated devices.

This patch adds request->alloc_time_ns which records when the request
allocation attempt started.  As it isn't used for the usual stats,
make it optional behind CONFIG_BLK_RQ_ALLOC_TIME and
QUEUE_FLAG_RQ_ALLOC_TIME so that it can be compiled out when there are
no users and it's active only on queues which need it even when
compiled in.

v2: s/pre_start_time/alloc_time/ and add CONFIG_BLK_RQ_ALLOC_TIME
    gating as suggested by Jens.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit beab17fc2a507e85dd18b3cef83820c5770c5f34 upstream.

io.weight is gonna be another rq_qos cgroup mechanism.  Let's rename
RQ_QOS_CGROUP which is being used by io.latency to RQ_QOS_LATENCY in
preparation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
[Jiufei: remove unused function rq_qos_id_to_name()]
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 9677a3e01f838622d2efc9a3ccb97090a2c3156a upstream.

wbt already gets queue depth changed notification through
wbt_set_queue_depth().  Generalize it into
rq_qos_ops->queue_depth_changed() so that other rq_qos policies can
easily hook into the events too.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit d3e65ffff61c329fb2d0bf15736c440c2d0cfc97 upstream.

Add a merge hook for rq_qos.  This will be used by io.weight.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 015d254cb02b6d8eec4b3366274bf4672f9e0b64 upstream.

Separate out blkcg_conf_get_disk() so that it can be used by blkcg
policy interface file input parsers before the policy is actually
enabled.  This doesn't introduce any functional changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 86a5bba5c252e90d264c7460e29a0b9e633777e7 upstream.

For policies which can do enough initialization from ->cpd_alloc_fn(),
make ->cpd_init_fn() optional.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit cf09a8ee19ad1f78b4e18cdde9f2a61133efacf5 upstream.

Instead of @node, pass in @q and @blkcg so that the alloc function has
more context.  This doesn't cause any behavior change and will be used
by io.weight implementation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
[Joseph: resolve conflicts for cfq]
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit fd112c74652371a023f85d87b70bee7169e8f4d0 upstream.

With the psi stuff in place we can use the memstall flag to indicate
pressure that happens from throttling.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 8508cf3ffad4defa202b303e5b6379efc4cd9054 upstream.

There are several definitions of those functions/macros in places that
mess with fixed-point load averages.  Provide an official version.

[akpm@linux-foundation.org: fix missed conversion in block/blk-iolatency.c]
Link: http://lkml.kernel.org/r/20180828172258.3185-5-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: NSuren Baghdasaryan <surenb@google.com>
Tested-by: NDaniel Drake <drake@endlessm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
[Joseph: use stat.mean instead of stat->rqs.mean to solve conflict]
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Conflicts:
    block/blk-iolatency.c

ECI may have an use case that configuring each device mapper disk
throttling policy just under root blkio cgroup, but actually using them
in different containers.
Since hierarchical throttling is now only supported on cgroup v2 and ECI
uses cgroup v1, so we have to enable hierarchical throttling on cgroup
v1.
This is ported from redhat 7u, and a year ago Jiufei already ported it
to alikernel 4.9 as well. So I think this change should be acceptable.
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

commit d2c9be89f8ebe7ebcc97676ac40f8dec1cf9b43a upstream.

8962842ca5ab ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
avoids sysfs buffer overflow, and reserves one character for line break.
However, the last snprintf() doesn't get correct 'size' parameter passed
in, so fixed it.

Fixes: 8962842ca5ab ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>