- 02 10月, 2015 6 次提交
-
-
由 Greg Thelen 提交于
The problem starts with a file backed dirty page which is charged to a memcg. Then page migration is used to move oldpage to newpage. Migration: - copies the oldpage's data to newpage - clears oldpage.PG_dirty - sets newpage.PG_dirty - uncharges oldpage from memcg - charges newpage to memcg Clearing oldpage.PG_dirty decrements the charged memcg's dirty page count. However, because newpage is not yet charged, setting newpage.PG_dirty does not increment the memcg's dirty page count. After migration completes newpage.PG_dirty is eventually cleared, often in account_page_cleaned(). At this time newpage is charged to a memcg so the memcg's dirty page count is decremented which causes underflow because the count was not previously incremented by migration. This underflow causes balance_dirty_pages() to see a very large unsigned number of dirty memcg pages which leads to aggressive throttling of buffered writes by processes in non root memcg. This issue: - can harm performance of non root memcg buffered writes. - can report too small (even negative) values in memory.stat[(total_)dirty] counters of all memcg, including the root. To avoid polluting migrate.c with #ifdef CONFIG_MEMCG checks, introduce page_memcg() and set_page_memcg() helpers. Test: 0) setup and enter limited memcg mkdir /sys/fs/cgroup/test echo 1G > /sys/fs/cgroup/test/memory.limit_in_bytes echo $$ > /sys/fs/cgroup/test/cgroup.procs 1) buffered writes baseline dd if=/dev/zero of=/data/tmp/foo bs=1M count=1k sync grep ^dirty /sys/fs/cgroup/test/memory.stat 2) buffered writes with compaction antagonist to induce migration yes 1 > /proc/sys/vm/compact_memory & rm -rf /data/tmp/foo dd if=/dev/zero of=/data/tmp/foo bs=1M count=1k kill % sync grep ^dirty /sys/fs/cgroup/test/memory.stat 3) buffered writes without antagonist, should match baseline rm -rf /data/tmp/foo dd if=/dev/zero of=/data/tmp/foo bs=1M count=1k sync grep ^dirty /sys/fs/cgroup/test/memory.stat (speed, dirty residue) unpatched patched 1) 841 MB/s 0 dirty pages 886 MB/s 0 dirty pages 2) 611 MB/s -33427456 dirty pages 793 MB/s 0 dirty pages 3) 114 MB/s -33427456 dirty pages 891 MB/s 0 dirty pages Notice that unpatched baseline performance (1) fell after migration (3): 841 -> 114 MB/s. In the patched kernel, post migration performance matches baseline. Fixes: c4843a75 ("memcg: add per cgroup dirty page accounting") Signed-off-by: NGreg Thelen <gthelen@google.com> Reported-by: NDave Hansen <dave.hansen@intel.com> Acked-by: NMichal Hocko <mhocko@suse.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
Commit 46c043ed ("mm: take i_mmap_lock in unmap_mapping_range() for DAX") moved some code in __dax_pmd_fault() that was responsible for zeroing newly allocated PMD pages. The new location didn't properly set up 'kaddr', so when run this code resulted in a NULL pointer BUG. Fix this by getting the correct 'kaddr' via bdev_direct_access(). Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reported-by: NDan Williams <dan.j.williams@intel.com> Reviewed-by: NDan Williams <dan.j.williams@intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
SunDong reported the following on https://bugzilla.kernel.org/show_bug.cgi?id=103841 I think I find a linux bug, I have the test cases is constructed. I can stable recurring problems in fedora22(4.0.4) kernel version, arch for x86_64. I construct transparent huge page, when the parent and child process with MAP_SHARE, MAP_PRIVATE way to access the same huge page area, it has the opportunity to lead to huge page copy on write failure, and then it will munmap the child corresponding mmap area, but then the child mmap area with VM_MAYSHARE attributes, child process munmap this area can trigger VM_BUG_ON in set_vma_resv_flags functions (vma - > vm_flags & VM_MAYSHARE). There were a number of problems with the report (e.g. it's hugetlbfs that triggers this, not transparent huge pages) but it was fundamentally correct in that a VM_BUG_ON in set_vma_resv_flags() can be triggered that looks like this vma ffff8804651fd0d0 start 00007fc474e00000 end 00007fc475e00000 next ffff8804651fd018 prev ffff8804651fd188 mm ffff88046b1b1800 prot 8000000000000027 anon_vma (null) vm_ops ffffffff8182a7a0 pgoff 0 file ffff88106bdb9800 private_data (null) flags: 0x84400fb(read|write|shared|mayread|maywrite|mayexec|mayshare|dontexpand|hugetlb) ------------ kernel BUG at mm/hugetlb.c:462! SMP Modules linked in: xt_pkttype xt_LOG xt_limit [..] CPU: 38 PID: 26839 Comm: map Not tainted 4.0.4-default #1 Hardware name: Dell Inc. PowerEdge R810/0TT6JF, BIOS 2.7.4 04/26/2012 set_vma_resv_flags+0x2d/0x30 The VM_BUG_ON is correct because private and shared mappings have different reservation accounting but the warning clearly shows that the VMA is shared. When a private COW fails to allocate a new page then only the process that created the VMA gets the page -- all the children unmap the page. If the children access that data in the future then they get killed. The problem is that the same file is mapped shared and private. During the COW, the allocation fails, the VMAs are traversed to unmap the other private pages but a shared VMA is found and the bug is triggered. This patch identifies such VMAs and skips them. Signed-off-by: NMel Gorman <mgorman@techsingularity.net> Reported-by: NSunDong <sund_sky@126.com> Reviewed-by: NMichal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: David Rientjes <rientjes@google.com> Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
Commit description is copied from the original post of this bug: http://comments.gmane.org/gmane.linux.kernel.mm/135349 Kernels after v3.9 use kmalloc_size(INDEX_NODE + 1) to get the next larger cache size than the size index INDEX_NODE mapping. In kernels 3.9 and earlier we used malloc_sizes[INDEX_L3 + 1].cs_size. However, sometimes we can't get the right output we expected via kmalloc_size(INDEX_NODE + 1), causing a BUG(). The mapping table in the latest kernel is like: index = {0, 1, 2 , 3, 4, 5, 6, n} size = {0, 96, 192, 8, 16, 32, 64, 2^n} The mapping table before 3.10 is like this: index = {0 , 1 , 2, 3, 4 , 5 , 6, n} size = {32, 64, 96, 128, 192, 256, 512, 2^(n+3)} The problem on my mips64 machine is as follows: (1) When configured DEBUG_SLAB && DEBUG_PAGEALLOC && DEBUG_LOCK_ALLOC && DEBUG_SPINLOCK, the sizeof(struct kmem_cache_node) will be "150", and the macro INDEX_NODE turns out to be "2": #define INDEX_NODE kmalloc_index(sizeof(struct kmem_cache_node)) (2) Then the result of kmalloc_size(INDEX_NODE + 1) is 8. (3) Then "if(size >= kmalloc_size(INDEX_NODE + 1)" will lead to "size = PAGE_SIZE". (4) Then "if ((size >= (PAGE_SIZE >> 3))" test will be satisfied and "flags |= CFLGS_OFF_SLAB" will be covered. (5) if (flags & CFLGS_OFF_SLAB)" test will be satisfied and will go to "cachep->slabp_cache = kmalloc_slab(slab_size, 0u)", and the result here may be NULL while kernel bootup. (6) Finally,"BUG_ON(ZERO_OR_NULL_PTR(cachep->slabp_cache));" causes the BUG info as the following shows (may be only mips64 has this problem): This patch fixes the problem of kmalloc_size(INDEX_NODE + 1) and removes the BUG by adding 'size >= 256' check to guarantee that all necessary small sized slabs are initialized regardless sequence of slab size in mapping table. Fixes: e3366016 ("slab: Use common kmalloc_index/kmalloc_size...") Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Reported-by: NLiuhailong <liu.hailong6@zte.com.cn> Acked-by: NChristoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andre Przywara 提交于
As include/uapi/linux/userfaultfd.h is a user visible header file, it should not include kernel-exclusive header files. So trying to build the userfaultfd test program from the selftests directory fails, since it contains a reference to linux/compiler.h. As it turns out, that header is not really needed there, so we can simply remove it to fix that issue. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Ryabinin 提交于
With KMEMCHECK=y, KASAN=n: arch/x86/platform/efi/efi.c:673:3: error: implicit declaration of function `memcpy' [-Werror=implicit-function-declaration] arch/x86/platform/efi/efi_64.c:139:2: error: implicit declaration of function `memcpy' [-Werror=implicit-function-declaration] arch/x86/include/asm/desc.h:121:2: error: implicit declaration of function `memcpy' [-Werror=implicit-function-declaration] Don't #undef memcpy if KASAN=n. Fixes: 769a8089 ("x86, efi, kasan: #undef memset/memcpy/memmove per arch") Signed-off-by: NAndrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: NIngo Molnar <mingo@kernel.org> Reported-by: NSedat Dilek <sedat.dilek@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 10月, 2015 6 次提交
-
-
git://git.infradead.org/linux-ubifs由 Linus Torvalds 提交于
Pull UBI/UBIFS fixes from Richard Weinberger: "This contains three bug fixes for both UBI and UBIFS" * tag 'upstream-4.3-rc4' of git://git.infradead.org/linux-ubifs: UBI: return ENOSPC if no enough space available UBI: Validate data_size UBIFS: Kill unneeded locking in ubifs_init_security
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull key signing fixes from James Morris: "Keyrings and modsign fixes from David Howells" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: MODSIGN: Change from CMS to PKCS#7 signing if the openssl is too old X.509: Don't strip leading 00's from key ID when constructing key description KEYS: Remove unnecessary header #inclusions from extract-cert.c KEYS: Fix race between key destruction and finding a keyring by name
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog fixes from Wim Van Sebroeck: "This fixes: - module autoload for 3 OF platform drivers - poweroff behaviour on bcm2835 watchdog device - I2C dependencies for iTCO_wdt.c" * git://www.linux-watchdog.org/linux-watchdog: watchdog: iTCO: Fix dependencies on I2C watchdog: bcm2835: Fix poweroff behaviour watchdog: Fix module autoload for OF platform driver
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmin fixes from Guenter Roeck: "Fix module autoload for various drivers" * tag 'hwmon-for-linus-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pwm-fan) Fix module autoload for OF platform driver hwmon: (gpio-fan) Fix module autoload for OF platform driver hwmon: (abx500) Fix module autoload for OF platform driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RCU fixes from Ingo Molnar: "Two RCU fixes: - work around bug with recent GCC versions. - fix false positive lockdep splat" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Suppress lockdep false positive for rcp->exp_funnel_mutex rcu: Change _wait_rcu_gp() to work around GCC bug 67055
-
由 Linus Torvalds 提交于
As reported by Dmitry Vyukov, we really shouldn't do ipc_addid() before having initialized the IPC object state. Yes, we initialize the IPC object in a locked state, but with all the lockless RCU lookup work, that IPC object lock no longer means that the state cannot be seen. We already did this for the IPC semaphore code (see commit e8577d1f: "ipc/sem.c: fully initialize sem_array before making it visible") but we clearly forgot about msg and shm. Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 9月, 2015 5 次提交
-
-
由 shengyong 提交于
UBI: attaching mtd1 to ubi0 UBI: scanning is finished UBI error: init_volumes: not enough PEBs, required 706, available 686 UBI error: ubi_wl_init: no enough physical eraseblocks (-20, need 1) UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -12 <= NOT ENOMEM UBI error: ubi_init: cannot attach mtd1 If available PEBs are not enough when initializing volumes, return -ENOSPC directly. If available PEBs are not enough when initializing WL, return -ENOSPC instead of -ENOMEM. Cc: stable@vger.kernel.org Signed-off-by: NSheng Yong <shengyong1@huawei.com> Signed-off-by: NRichard Weinberger <richard@nod.at> Reviewed-by: NDavid Gstir <david@sigma-star.at>
-
由 Richard Weinberger 提交于
Make sure that data_size is less than LEB size. Otherwise a handcrafted UBI image is able to trigger an out of bounds memory access in ubi_compare_lebs(). Cc: stable@vger.kernel.org Signed-off-by: NRichard Weinberger <richard@nod.at> Reviewed-by: NDavid Gstir <david@sigma-star.at>
-
由 Richard Weinberger 提交于
Fixes the following lockdep splat: [ 1.244527] ============================================= [ 1.245193] [ INFO: possible recursive locking detected ] [ 1.245193] 4.2.0-rc1+ #37 Not tainted [ 1.245193] --------------------------------------------- [ 1.245193] cp/742 is trying to acquire lock: [ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0 [ 1.245193] [ 1.245193] but task is already holding lock: [ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280 [ 1.245193] [ 1.245193] other info that might help us debug this: [ 1.245193] Possible unsafe locking scenario: [ 1.245193] [ 1.245193] CPU0 [ 1.245193] ---- [ 1.245193] lock(&sb->s_type->i_mutex_key#9); [ 1.245193] lock(&sb->s_type->i_mutex_key#9); [ 1.245193] [ 1.245193] *** DEADLOCK *** [ 1.245193] [ 1.245193] May be due to missing lock nesting notation [ 1.245193] [ 1.245193] 2 locks held by cp/742: [ 1.245193] #0: (sb_writers#5){.+.+.+}, at: [<ffffffff811ad37f>] mnt_want_write+0x1f/0x50 [ 1.245193] #1: (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280 [ 1.245193] [ 1.245193] stack backtrace: [ 1.245193] CPU: 2 PID: 742 Comm: cp Not tainted 4.2.0-rc1+ #37 [ 1.245193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140816_022509-build35 04/01/2014 [ 1.245193] ffffffff8252d530 ffff88007b023a38 ffffffff814f6f49 ffffffff810b56c5 [ 1.245193] ffff88007c30cc80 ffff88007b023af8 ffffffff810a150d ffff88007b023a68 [ 1.245193] 000000008101302a ffff880000000000 00000008f447e23f ffffffff8252d500 [ 1.245193] Call Trace: [ 1.245193] [<ffffffff814f6f49>] dump_stack+0x4c/0x65 [ 1.245193] [<ffffffff810b56c5>] ? console_unlock+0x1c5/0x510 [ 1.245193] [<ffffffff810a150d>] __lock_acquire+0x1a6d/0x1ea0 [ 1.245193] [<ffffffff8109fa78>] ? __lock_is_held+0x58/0x80 [ 1.245193] [<ffffffff810a1a93>] lock_acquire+0xd3/0x270 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff814fc83b>] mutex_lock_nested+0x6b/0x3a0 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff8128e286>] ubifs_create+0xa6/0x1f0 [ 1.245193] [<ffffffff81198e7f>] ? path_openat+0x3af/0x1280 [ 1.245193] [<ffffffff81195d15>] vfs_create+0x95/0xc0 [ 1.245193] [<ffffffff8119929c>] path_openat+0x7cc/0x1280 [ 1.245193] [<ffffffff8109ffe3>] ? __lock_acquire+0x543/0x1ea0 [ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0 [ 1.245193] [<ffffffff81088c00>] ? calc_global_load_tick+0x60/0x90 [ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0 [ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180 [ 1.245193] [<ffffffff8119ac55>] do_filp_open+0x75/0xd0 [ 1.245193] [<ffffffff814ffd86>] ? _raw_spin_unlock+0x26/0x40 [ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180 [ 1.245193] [<ffffffff81189bd9>] do_sys_open+0x129/0x200 [ 1.245193] [<ffffffff81189cc9>] SyS_open+0x19/0x20 [ 1.245193] [<ffffffff81500717>] entry_SYSCALL_64_fastpath+0x12/0x6f While the lockdep splat is a false positive, becuase path_openat holds i_mutex of the parent directory and ubifs_init_security() tries to acquire i_mutex of a new inode, it reveals that taking i_mutex in ubifs_init_security() is in vain because it is only being called in the inode allocation path and therefore nobody else can see the inode yet. Cc: stable@vger.kernel.org # 3.20- Reported-and-tested-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reviewed-and-tested-by: NDongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: dedekind1@gmail.com
-
由 James Morris 提交于
Merge tag 'keys-fixes-20150925' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into for-linus Keyrings fixes from David Howells, for current Linus.
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull arch/tile bugfix from Chris Metcalf: "This fixes a bug in 'make allmodconfig'" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: fix build failure
-
- 28 9月, 2015 9 次提交
-
-
由 Sudip Mukherjee 提交于
When building with allmodconfig the build was failing with the error: arch/tile/kernel/usb.c:70:1: warning: data definition has no type or storage class [enabled by default] arch/tile/kernel/usb.c:70:1: error: type defaults to 'int' in declaration of 'arch_initcall' [-Werror=implicit-int] arch/tile/kernel/usb.c:70:1: warning: parameter names (without types) in function declaration [enabled by default] arch/tile/kernel/usb.c:63:19: warning: 'tilegx_usb_init' defined but not used [-Wunused-function] Include linux/module.h to resolve the build failure. Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com>
-
由 Guenter Roeck 提交于
If I2C is built as module, the iTCO watchdog driver must be built as module as well. I2C_I801 must only be selected if I2C is configured. This fixes the following build errors, seen if I2C=m and ITCO_WDT=y. i2c-i801.c:(.text+0x2bf055): undefined reference to `i2c_del_adapter' i2c-i801.c:(.text+0x2c13e0): undefined reference to `i2c_add_adapter' i2c-i801.c:(.text+0x2c17bd): undefined reference to `i2c_new_device' Fixes: 2a7a0e9b ("watchdog: iTCO_wdt: Add support for TCO on Intel Sunrisepoint") Reviewed-by: NMatt Fleming <matt.fleming@intel.com> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Noralf Trønnes 提交于
Currently poweroff/halt results in a reboot on the Raspberry Pi. The firmware uses the RSTS register to know which partiton to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. Partiton 63 is a special partition used by the firmware to indicate halt. The firmware made this change in 19 Aug 2013 and was matched by the downstream commit: Changes for new NOOBS multi partition booting from gsh Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> Tested-by: NStephen Warren <swarren@wwwdotorg.org> Acked-by: NStephen Warren <swarren@wwwdotorg.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Luis de Bethencourt 提交于
These platform drivers have a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: NLuis de Bethencourt <luis@debethencourt.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Ingo Molnar 提交于
Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent Pull RCU fixes from Paul E. McKenney, for two regressions introduced in this merge window: - Fix bug with recent GCCs. - Fix false positive lockdep splat. Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: - Properly setup irq handling for ATH79 platforms - Fix bootmem mapstart calculation for contiguous maps - Handle little endian and older CPUs correct in BPF - Fix console for Fulong 2E systems - Handle FTLB correctly on R6 CPUs - Fixes for CM, GIC and MAAR support code * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Initialise MAARs on secondary CPUs MIPS: print MAAR configuration during boot MIPS: mm: compile maar_init unconditionally irqchip: mips-gic: Fix pending & mask reads for MIPS64 with 32b GIC. irqchip: mips-gic: Convert CPU numbers to VP IDs. MIPS: CM: Provide a function to map from CPU to VP ID. MIPS: Fix FTLB detection for R6 MIPS: cpu-features: Add cpu_has_ftlb MIPS: ATH79: Add irq chip ar7240-misc-intc MIPS: ATH79: Set missing irq ack handler for ar7100-misc-intc irq chip MIPS: BPF: Fix build on pre-R2 little endian CPUs MIPS: BPF: Avoid unreachable code on little endian MIPS: bootmem: Fix mapstart calculation for contiguous maps MIPS: Fix console output for Fulong2e system
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Thomas Gleixner: "Another pile of fixes for perf: - Plug overflows and races in the core code - Sanitize the flow of the perf syscall so we error out before handling the more complex and hard to undo setups - Improve and fix Broadwell and Skylake hardware support - Revert a fix which broke what it tried to fix in perf tools - A couple of smaller fixes in various places of perf tools" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix copying of /proc/kcore perf intel-pt: Remove no_force_psb from documentation perf probe: Use existing routine to look for a kernel module by dso->short_name perf/x86: Change test_aperfmperf() and test_intel() to static tools lib traceevent: Fix string handling in heterogeneous arch environments perf record: Avoid infinite loop at buildid processing with no samples perf: Fix races in computing the header sizes perf: Fix u16 overflows perf: Restructure perf syscall point of no return perf/x86/intel: Fix Skylake FRONTEND MSR extrareg mask perf/x86/intel/pebs: Add PEBS frontend profiling for Skylake perf/x86/intel: Make the CYCLE_ACTIVITY.* constraint on Broadwell more specific perf tools: Bool functions shouldn't return -1 tools build: Add test for presence of __get_cpuid() gcc builtin tools build: Add test for presence of numa_num_possible_cpus() in libnuma Revert "perf symbols: Fix mismatched declarations for elf_getphdrnum" perf stat: Fix per-pkg event reporting bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fix from Thomas Gleixner: "A single bug fix for the scheduler to prevent dequeueing of the idle task when setting the cpus allowed mask" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix crash trying to dequeue/enqueue the idle thread
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fix from Thomas Gleixner: "A single bugfix for lockdep to preserve the pinning counter when rebuilding the lock stack" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Fix hlock->pin_count reset on lock stack rebuilds
-
- 27 9月, 2015 14 次提交
-
-
由 Paul Burton 提交于
MAARs should be initialised on each CPU (or rather, core) in the system in order to achieve consistent behaviour & performance. Previously they have only been initialised on the boot CPU which leads to performance problems if tasks are later scheduled on a secondary CPU, particularly if those tasks make use of unaligned vector accesses where some CPUs don't handle any cases in hardware for non-speculative memory regions. Fix this by recording the MAAR configuration from the boot CPU and applying it to secondary CPUs as part of their bringup. Reported-by: NDoug Gilmore <doug.gilmore@imgtec.com> Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: linux-kernel@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: James Hogan <james.hogan@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Hemmo Nieminen <hemmo.nieminen@iki.fi> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11239/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Verifying that the MAAR configuration is as expected is useful when debugging the performance of a system. Print out the memory regions configured via MAAR along with their attributes. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: linux-kernel@vger.kernel.org Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11238/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
maar_init was previously only compiled when CONFIG_NEED_MULTIPLE_NODES was not set, which has been fine since it is only called from the standard implementation of mem_init which has the same condition. In preparation for calling it from the SMP startup code on secondary CPUs, move maar_init outside of the #ifndef such that it is always compiled. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: linux-kernel@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/11237/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
gic_handle_shared_int reads the GIC interrupt pending & mask registers directly into a bitmap, which is defined as an array of unsigned longs. The GIC pending registers may be 32 bits wide if the CM is older than CM3, regardless of the bit width of the CPU, but for MIPS64 kernels the unsigned longs in the bitmap will be 64 bits wide. In this case we need to perform 2 x 32 bit reads per 64 bit unsigned long in order to avoid missing interrupts. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11213/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Make use of the mips_cm_vp_id function to convert from Linux CPU numbers to the VP IDs used by hardware, which are not identical in all systems. Without doing so we map interrupts to incorrect VP(E)s. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Paul Burton <paul.burton@imgtec.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11212/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
The VP ID of a given CPU may not match up with the CPU number used by Linux. For example, if the width of the VP part of the VP ID is wider than log2(number of VPs per core) and the system has multiple cores then this will be the case. Alternatively, if a pre-r6 system implements the MT ASE with multiple VPEs per core and Linux is built without support for the MT ASE then the numbers won't match up either. Provide a function to convert from CPU number to VP ID. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11211/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "Two bugfixes from Andy addressing at least some of the subtle NMI related wreckage which has been reported by Sasha Levin" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi/64: Fix a paravirt stack-clobbering bug in the NMI code x86/paravirt: Replace the paravirt nop with a bona fide empty function
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fix from Thomass Gleixner: "A bugfix for the atmel aic5 irq chip driver which caches the wrong data and thereby breaking resume" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/atmel-aic5: Use per chip mask caches in mask/unmask()
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Just two fixes: wire up the new system calls added during the last merge window, and fix another user access site" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: alignment: fix alignment handling for uaccess changes ARM: wire up new syscalls
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Our first real batch of fixes this release cycle. Nothing really concerning, and diffstat is a bit inflated due to some DT contents moving around on STi platforms. There's a collection of them here: - A fixup for a build breakage that hits on arm64 allmodconfig in QCOM SCM firmware drivers - MMC fixes for OMAP that had quite a bit of breakage this merge window. - Misc build/warning fixes on PXA and OMAP - A couple of minor fixes for Beagleboard X15 which is now starting to see a few more users in the wild" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver ARM: dts: fix omap2+ address translation for pbias firmware: qcom: scm: Add function stubs for ARM64 ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies ARM: pxa: balloon3: Fix build error ARM: dts: Fixup model name for HP t410 dts ARM: dts: DRA7: fix a typo in ethernet ARM: omap2plus_defconfig: make PCF857x built-in ARM: dts: Use ti,pbias compatible string for pbias ARM: OMAP5: Cleanup options for SoC only build ARM: DRA7: Select missing options for SoC only build ARM: OMAP2+: board-generic: Remove stale of_irq macros ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410 ARM: dts: am335x-phycore-som: Fix mpu voltage ...
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French: "Four fixes from testing at the recent SMB3 Plugfest including two important authentication ones (one fixes authentication problems to some popular servers when clock times differ more than two hours between systems, the other fixes Kerberos authentication for SMB3)" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: fix encryption error checks on mount [SMB3] Fix sec=krb5 on smb3 mounts cifs: use server timestamp for ntlmv2 authentication disabling oplocks/leases via module parm enable_oplocks broken for SMB3
-
https://github.com/rjarzmik/linux由 Olof Johansson 提交于
ARM: pxa: fixes for v4.3 These fixes are mainly regression fixes triggered by irq changes, common clock framework introduction and sound side-effect of other platforms. * tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux: ARM: pxa: balloon3: Fix build error ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding ARM: pxa: fix DFI bus lockups on startup Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.3-rc cycle: - Two more patches to fix most of the MMC regressions with the PBIAS regulator changes. At least two MMC driver related issues still seems to remain for omap3 legacy booting and omap4 duovero. Note that the dts changes depend on a recent regulator fix, and are based on the regulator commit now in mainline kernel - Enable autoidle for am43xx clocks to prevent clocks from staying always on - Fix i2c5 pinctrl offsets for omap5-uevm - Enable PCA953X as that's needed for HDMI to work on omap5 - Update phy supplies for beagle x15 beta board - Use palmas-usb for on beagle x15 to start using the related driver that recently got merged * tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: fix omap2+ address translation for pbias ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies regulator: pbias: program pbias register offset in pbias driver ARM: omap2plus_defconfig: Enable MUSB DMA support ARM: DRA752: Add ID detect for ES2.0 ARM: OMAP3: vc: fix 'or' always true warning ARM: OMAP2+: Fix booting if no timer parent clock is available ARM: OMAP2+: omap-device: fix race deferred probe of omap_hsmmc vs omap_device_late_init Signed-off-by: NOlof Johansson <olof@lixom.net>
-