提交 2a7a0e9b 编写于 作者: M Matt Fleming 提交者: Lee Jones

watchdog: iTCO_wdt: Add support for TCO on Intel Sunrisepoint

The revision of the watchdog hardware in Sunrisepoint necessitates a new
"version" inside the TCO watchdog driver because some of the register
layouts have changed.

Also update the Kconfig entry to select both the LPC and SMBus drivers
since the TCO device is on the SMBus in Sunrisepoint.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
上级 94246930
......@@ -797,7 +797,8 @@ config ITCO_WDT
tristate "Intel TCO Timer/Watchdog"
depends on (X86 || IA64) && PCI
select WATCHDOG_CORE
select LPC_ICH
select LPC_ICH if !EXPERT
select I2C_I801 if !EXPERT
---help---
Hardware driver for the intel TCO timer based watchdog devices.
These drivers are included in the Intel 82801 I/O Controller
......
......@@ -145,59 +145,67 @@ static inline unsigned int ticks_to_seconds(int ticks)
return iTCO_wdt_private.iTCO_version == 3 ? ticks : (ticks * 6) / 10;
}
static inline u32 no_reboot_bit(void)
{
u32 enable_bit;
switch (iTCO_wdt_private.iTCO_version) {
case 3:
enable_bit = 0x00000010;
break;
case 2:
enable_bit = 0x00000020;
break;
case 4:
case 1:
default:
enable_bit = 0x00000002;
break;
}
return enable_bit;
}
static void iTCO_wdt_set_NO_REBOOT_bit(void)
{
u32 val32;
/* Set the NO_REBOOT bit: this disables reboots */
if (iTCO_wdt_private.iTCO_version == 3) {
val32 = readl(iTCO_wdt_private.gcs_pmc);
val32 |= 0x00000010;
writel(val32, iTCO_wdt_private.gcs_pmc);
} else if (iTCO_wdt_private.iTCO_version == 2) {
if (iTCO_wdt_private.iTCO_version >= 2) {
val32 = readl(iTCO_wdt_private.gcs_pmc);
val32 |= 0x00000020;
val32 |= no_reboot_bit();
writel(val32, iTCO_wdt_private.gcs_pmc);
} else if (iTCO_wdt_private.iTCO_version == 1) {
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
val32 |= 0x00000002;
val32 |= no_reboot_bit();
pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
}
}
static int iTCO_wdt_unset_NO_REBOOT_bit(void)
{
int ret = 0;
u32 val32;
u32 enable_bit = no_reboot_bit();
u32 val32 = 0;
/* Unset the NO_REBOOT bit: this enables reboots */
if (iTCO_wdt_private.iTCO_version == 3) {
val32 = readl(iTCO_wdt_private.gcs_pmc);
val32 &= 0xffffffef;
writel(val32, iTCO_wdt_private.gcs_pmc);
val32 = readl(iTCO_wdt_private.gcs_pmc);
if (val32 & 0x00000010)
ret = -EIO;
} else if (iTCO_wdt_private.iTCO_version == 2) {
if (iTCO_wdt_private.iTCO_version >= 2) {
val32 = readl(iTCO_wdt_private.gcs_pmc);
val32 &= 0xffffffdf;
val32 &= ~enable_bit;
writel(val32, iTCO_wdt_private.gcs_pmc);
val32 = readl(iTCO_wdt_private.gcs_pmc);
if (val32 & 0x00000020)
ret = -EIO;
} else if (iTCO_wdt_private.iTCO_version == 1) {
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
val32 &= 0xfffffffd;
val32 &= ~enable_bit;
pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
if (val32 & 0x00000002)
ret = -EIO;
}
return ret; /* returns: 0 = OK, -EIO = Error */
if (val32 & enable_bit)
return -EIO;
return 0;
}
static int iTCO_wdt_start(struct watchdog_device *wd_dev)
......@@ -503,12 +511,21 @@ static int iTCO_wdt_probe(struct platform_device *dev)
pdata->name, pdata->version, (u64)TCOBASE);
/* Clear out the (probably old) status */
if (iTCO_wdt_private.iTCO_version == 3) {
switch (iTCO_wdt_private.iTCO_version) {
case 4:
outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */
outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */
break;
case 3:
outl(0x20008, TCO1_STS);
} else {
break;
case 2:
case 1:
default:
outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */
outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */
outw(0x0004, TCO2_STS); /* Clear BOOT_STS bit */
break;
}
iTCO_wdt_watchdog_dev.bootstatus = 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册